https://wiki.archlinux.org/api.php?action=feedcontributions&user=Aleksander&feedformat=atomArchWiki - User contributions [en]2024-03-28T18:13:45ZUser contributionsMediaWiki 1.41.0https://wiki.archlinux.org/index.php?title=Brother_DCP-7030&diff=200920Brother DCP-70302012-05-10T12:31:24Z<p>Aleksander: /* Drivers */</p>
<hr />
<div>[[Category:Printers]]<br />
[[Category:Imaging]]<br />
<br />
=Introduction=<br />
<br />
This is a brief tutorial how to setup the Brother DCP-7030 (multi function laser copier printer) on i686 Arch.<br />
<br />
=Printer=<br />
==CUPS==<br />
Install CUPS (see CUPS [https://wiki.archlinux.org/index.php/CUPS page]).<br />
<br />
==Usblp==<br />
<br />
It may be necessary to blacklist Usblp module to get AUR driver working. To do that, you may add "!usblp" at the end of your rc.conf MODULES list.<br />
<br />
==Drivers==<br />
===Original===<br />
There is the [https://aur.archlinux.org/packages.php?ID=27399 brother-dcp7030] in AUR. It contains driver from Brother.<br />
<br />
Install drivers:<br />
% yaourt -S brother-dcp7030<br />
<br />
Replace all the <code>/etc/init.d/</code> occurences by <code>/etc/rc.d/</code> in the {{ic|/usr/local/Brother/cupswrapper/cupswrapperDCP7030-2.0.2}}.<br />
<br />
After that replace <code>/etc/rc.d/cups</code> by <code>/etc/rc.d/cupsd</code><br />
and <code>/etc/rc.d/cupsys</code> by <code>/etc/rc.d/cupsd</code> in the above file.<br />
<br />
Run<br />
# /usr/local/Brother/cupswrapper/cupswrapperDCP7030-2.0.2<br />
<br />
Now go to the CUPS page: http://localhost:631/ <br />
<br />
Under the Printers tab you should see a DCP7030 printer automatically installed and configured.<br />
<br />
===Using PPD from hl1250===<br />
<br />
Unfortunately original driver did not work with DCP-7030 on my PC.<br />
<br />
I got this [http://www.openprinting.org/ppd-o-matic.php?driver=hl1250&printer=Brother-DCP-7020 PPD]. I replaced all <code>DCP-7020</code> by <code>DCP-7030</code>. After this I add a new printer manually using this PPD.<br />
<br />
=Scanner=<br />
<br />
==SANE==<br />
Install SANE:<br />
# pacman -S sane<br />
<br />
Add your user to <code>scanner</code> group:<br />
# gpasswd -a username scanner<br />
<br />
{{Note|You need to logout/login for this to take effect.}}<br />
<br />
==Drivers==<br />
There is the [https://aur.archlinux.org/packages.php?ID=24475 brscan3] in AUR.<br />
<br />
Install drivers:<br />
% yaourt -S brscan3<br />
<br />
After installing add line <code>brother3</code> in the {{ic|/etc/sane.d/dll.conf}}.<br />
<br />
Now you can try to see if SANE recognizes your scanner<br />
$ scanimage -L<br />
<br />
For more info see SANE [https://wiki.archlinux.org/index.php/Sane page].<br />
<br />
If your scanning software can't use the scanner even with correct scanimage, check your printer usb location with<br />
$ lsusb<br />
<br />
and give writing permission for that device to all users. For example, for:<br />
Bus 008 Device 004: ID 04f9:01ea Brother Industries, Ltd DCP-7030<br />
use:<br />
# sudo chmod a+w /dev/bus/usb/002/004</div>Aleksanderhttps://wiki.archlinux.org/index.php?title=Brother_DCP-7030&diff=174002Brother DCP-70302011-12-13T16:25:22Z<p>Aleksander: usblp note</p>
<hr />
<div>[[Category:Printers_(English)]]<br />
[[Category:Imaging_(English)]]<br />
<br />
=Introduction=<br />
<br />
This is a brief tutorial how to setup the Brother DCP-7030 (multi function laser copier printer) on i686 Arch.<br />
<br />
=Printer=<br />
==CUPS==<br />
Install CUPS (see CUPS [https://wiki.archlinux.org/index.php/CUPS page]).<br />
<br />
==Usblp==<br />
<br />
It may be necessary to blacklist Usblp module to get AUR driver working. To do that, you may add "!usblp" at the end of your rc.conf MODULES list.<br />
<br />
==Drivers==<br />
===Original===<br />
There is the [http://aur.archlinux.org/packages.php?ID=27399 brother-dcp7030] in AUR. It contains driver from Brother.<br />
<br />
Install drivers:<br />
% yaourt -S brother-dcp7030<br />
<br />
Replace all the <code>/etc/init.d/</code> occurences by <code>/etc/rc.d/</code> in the {{Filename|/usr/local/Brother/cupswrapper/cupswrapperDCP7030-2.0.2}}.<br />
<br />
After that replace <code>/etc/rc.d/cups</code> by <code>/etc/rc.d/cupsd</code><br />
and <code>/etc/rc.d/cupsys</code> by <code>/etc/rc.d/cupsd</code> in the above file.<br />
<br />
Run<br />
# /usr/local/Brother/cupswrapper/cupswrapperDCP7030-2.0.2<br />
<br />
Now go to the CUPS page: http://localhost:631/ <br />
<br />
Under the Printers tab you should see a DCP7030 printer automatically installed and configured.<br />
<br />
===Using PPD from hl1250===<br />
<br />
Unfortunately original driver did not work with DCP-7030 on my PC.<br />
<br />
I got this [http://www.openprinting.org/ppd-o-matic.php?driver=hl1250&printer=Brother-DCP-7020 PPD]. I replaced all <code>DCP-7020</code> by <code>DCP-7030</code>. After this I add a new printer manually using this PPD.<br />
<br />
=Scanner=<br />
<br />
==SANE==<br />
Install SANE:<br />
# pacman -S sane<br />
<br />
Add your user to <code>scanner</code> group:<br />
# gpasswd -a username scanner<br />
<br />
{{Note|You need to logout/login for this to take effect.}}<br />
<br />
==Drivers==<br />
There is the [http://aur.archlinux.org/packages.php?ID=24475 brscan3] in AUR.<br />
<br />
Install drivers:<br />
% yaourt -S brscan3<br />
<br />
After installing add line <code>brother3</code> in the {{Filename|/etc/sane.d/dll.conf}}.<br />
<br />
Now you can try to see if SANE recognizes your scanner<br />
$ scanimage -L<br />
<br />
For more info see SANE [https://wiki.archlinux.org/index.php/Sane page].</div>Aleksanderhttps://wiki.archlinux.org/index.php?title=Talk:Brother_DCP-7030&diff=174001Talk:Brother DCP-70302011-12-13T16:23:33Z<p>Aleksander: usblp note</p>
<hr />
<div>It may be necessary to blacklist usblp to get this printer working.</div>Aleksander