https://wiki.archlinux.org/api.php?action=feedcontributions&user=Gnu+d&feedformat=atomArchWiki - User contributions [en]2024-03-28T16:43:47ZUser contributionsMediaWiki 1.41.0https://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151925Dell Inspiron N50102011-08-14T09:11:35Z<p>Gnu d: /* DVDRW */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
* Need someone with wikimedia syntax skills to guide me formating this wiki page, please :).<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==DVDRW==<br />
ATAPI: TSSTcorp DVD+/-RW TS-L633J, D200, max UDMA/100<br />
<br />
CD-ROM TSSTcorp DVD+-RW TS-L633J D200 PQ: 0 ANSI: 5<br />
<br />
Using driver: scsi3-mmc<br />
<br />
Supported extensions:<br />
<br />
24x/24x writer dvd-ram cd/rw xa/form2 cdda tray<br />
<br />
<br />
Successfully burns both cd mediums and dvd mediums, tested using K3B 2.0.2-1.<br />
<br />
==Touchpad==<br />
It's using the synaptic driver.<br />
<br />
Works ok after installing the package xf86-input-synaptics.<br />
<br />
Todo: Needs tweaking, cause it's too anoying.<br />
<br />
Use this script to disable the touch pad when you don't like it:<br />
<br />
#!/bin/bash<br />
<br />
if [ $(synclient -l | grep TouchpadOff | gawk -F '= ' '{ print $2 }') -eq 0 ]; then<br />
synclient TouchpadOff=1<br />
else<br />
synclient TouchpadOff=0<br />
fi<br />
<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
*Processor frequency control - says unsupported I think:<br />
<br />
<nowiki><br />
<br />
:: Setting cpufreq governing rules [BUSY]<br />
grep: /sys/devices/system/cpu/cpu* /cpufreq/scaling_available_governors: No such file or directory, cpu 0 wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
</nowiki><br />
<br />
===Unknown / Untested===<br />
*HDMI Video<br />
*Redwood HDMI Audio 5600<br />
*eSata port<br />
<br />
==Installation==<br />
Normal installation with no issues to report.<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error message:<br />
<br />
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
<br />
<br />
Workaround:<br />
<br />
Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<br />
<br />
<nowiki>blacklist intel_ips</nowiki><br />
<br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439 Archlinux bug report]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104 Ubuntu bug report]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151924Dell Inspiron N50102011-08-14T09:10:55Z<p>Gnu d: </p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
* Need someone with wikimedia syntax skills to guide me formating this wiki page, please :).<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==DVDRW==<br />
ATAPI: TSSTcorp DVD+/-RW TS-L633J, D200, max UDMA/100<br />
CD-ROM TSSTcorp DVD+-RW TS-L633J D200 PQ: 0 ANSI: 5<br />
Using driver: scsi3-mmc<br />
Supported extensions:<br />
<br />
24x/24x writer dvd-ram cd/rw xa/form2 cdda tray<br />
<br />
Successfully burns both cd mediums and dvd mediums, tested using K3B 2.0.2-1. <br />
==Touchpad==<br />
It's using the synaptic driver.<br />
<br />
Works ok after installing the package xf86-input-synaptics.<br />
<br />
Todo: Needs tweaking, cause it's too anoying.<br />
<br />
Use this script to disable the touch pad when you don't like it:<br />
<br />
#!/bin/bash<br />
<br />
if [ $(synclient -l | grep TouchpadOff | gawk -F '= ' '{ print $2 }') -eq 0 ]; then<br />
synclient TouchpadOff=1<br />
else<br />
synclient TouchpadOff=0<br />
fi<br />
<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
*Processor frequency control - says unsupported I think:<br />
<br />
<nowiki><br />
<br />
:: Setting cpufreq governing rules [BUSY]<br />
grep: /sys/devices/system/cpu/cpu* /cpufreq/scaling_available_governors: No such file or directory, cpu 0 wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
</nowiki><br />
<br />
===Unknown / Untested===<br />
*HDMI Video<br />
*Redwood HDMI Audio 5600<br />
*eSata port<br />
<br />
==Installation==<br />
Normal installation with no issues to report.<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error message:<br />
<br />
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
<br />
<br />
Workaround:<br />
<br />
Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<br />
<br />
<nowiki>blacklist intel_ips</nowiki><br />
<br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439 Archlinux bug report]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104 Ubuntu bug report]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151921Dell Inspiron N50102011-08-14T09:06:03Z<p>Gnu d: /* Unknown / Untested */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
* Need someone with wikimedia syntax skills to guide me formating this wiki page, please :).<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
*Processor frequency control - says unsupported I think:<br />
<br />
<nowiki><br />
<br />
:: Setting cpufreq governing rules [BUSY]<br />
grep: /sys/devices/system/cpu/cpu* /cpufreq/scaling_available_governors: No such file or directory, cpu 0 wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
</nowiki><br />
<br />
===Unknown / Untested===<br />
*HDMI Video<br />
*Redwood HDMI Audio 5600<br />
*eSata port<br />
<br />
==Installation==<br />
Normal installation with no issues to report.<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error message:<br />
<br />
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
<br />
<br />
Workaround:<br />
<br />
Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<br />
<br />
<nowiki>blacklist intel_ips</nowiki><br />
<br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439 Archlinux bug report]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104 Ubuntu bug report]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151920Dell Inspiron N50102011-08-14T09:05:24Z<p>Gnu d: /* To do */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
* Need someone with wikimedia syntax skills to guide me formating this wiki page, please :).<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
*Processor frequency control - says unsupported I think:<br />
<br />
<nowiki><br />
<br />
:: Setting cpufreq governing rules [BUSY]<br />
grep: /sys/devices/system/cpu/cpu* /cpufreq/scaling_available_governors: No such file or directory, cpu 0 wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
</nowiki><br />
<br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
Normal installation with no issues to report.<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error message:<br />
<br />
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
<br />
<br />
Workaround:<br />
<br />
Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<br />
<br />
<nowiki>blacklist intel_ips</nowiki><br />
<br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439 Archlinux bug report]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104 Ubuntu bug report]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151919Dell Inspiron N50102011-08-14T09:04:13Z<p>Gnu d: /* Installation */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
*Processor frequency control - says unsupported I think:<br />
<br />
<nowiki><br />
<br />
:: Setting cpufreq governing rules [BUSY]<br />
grep: /sys/devices/system/cpu/cpu* /cpufreq/scaling_available_governors: No such file or directory, cpu 0 wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
</nowiki><br />
<br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
Normal installation with no issues to report.<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error message:<br />
<br />
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
<br />
<br />
Workaround:<br />
<br />
Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<br />
<br />
<nowiki>blacklist intel_ips</nowiki><br />
<br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439 Archlinux bug report]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104 Ubuntu bug report]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151917Dell Inspiron N50102011-08-14T09:03:42Z<p>Gnu d: /* General */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
*Processor frequency control - says unsupported I think:<br />
<br />
<nowiki><br />
<br />
:: Setting cpufreq governing rules [BUSY]<br />
grep: /sys/devices/system/cpu/cpu* /cpufreq/scaling_available_governors: No such file or directory, cpu 0 wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
</nowiki><br />
<br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error message:<br />
<br />
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
<br />
<br />
Workaround:<br />
<br />
Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<br />
<br />
<nowiki>blacklist intel_ips</nowiki><br />
<br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439 Archlinux bug report]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104 Ubuntu bug report]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151916Dell Inspiron N50102011-08-14T09:02:39Z<p>Gnu d: /* Troubleshoot */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
*Processor frequency control - says unsupported I think:<br />
<br />
<nowiki><br />
<br />
:: Setting cpufreq governing rules [BUSY]<br />
grep: /sys/devices/system/cpu/cpu* /cpufreq/scaling_available_governors: No such file or directory, cpu 0 wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
</nowiki><br />
<br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error message:<br />
<br />
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
<br />
<br />
Workaround:<br />
<br />
Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<br />
<br />
<nowiki>blacklist intel_ips</nowiki><br />
<br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151915Dell Inspiron N50102011-08-14T09:01:57Z<p>Gnu d: /* Not Working */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
*Processor frequency control - says unsupported I think:<br />
<br />
<nowiki><br />
<br />
:: Setting cpufreq governing rules [BUSY]<br />
grep: /sys/devices/system/cpu/cpu* /cpufreq/scaling_available_governors: No such file or directory, cpu 0 wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
</nowiki><br />
<br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151914Dell Inspiron N50102011-08-14T09:01:43Z<p>Gnu d: /* Not Working */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
*Processor frequency control - says unsupported I think:<br />
<br />
<nowiki><br />
:: Setting cpufreq governing rules [BUSY]<br />
grep: /sys/devices/system/cpu/cpu* /cpufreq/scaling_available_governors: No such file or directory, cpu 0 wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
</nowiki><br />
<br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151913Dell Inspiron N50102011-08-14T08:59:42Z<p>Gnu d: /* Not Working */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<br />
<br />
<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
</nowiki><br />
<br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151912Dell Inspiron N50102011-08-14T08:58:44Z<p>Gnu d: /* Not Working */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<br />
<br />
<br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]<br />
<br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151911Dell Inspiron N50102011-08-14T08:57:52Z<p>Gnu d: /* Display */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151910Dell Inspiron N50102011-08-14T08:57:34Z<p>Gnu d: /* Display */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
<br />
1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4<br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151909Dell Inspiron N50102011-08-14T08:57:09Z<p>Gnu d: /* Display */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
<br />
<nowiki> 1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4 </nowiki><br />
<br />
Brightness controls work out of the box.<br />
<br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151908Dell Inspiron N50102011-08-14T08:56:32Z<p>Gnu d: /* VGA */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7.<br />
<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
<nowiki> 1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4 </nowiki><br />
<br />
Brightness controls work out of the box. <br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151907Dell Inspiron N50102011-08-14T08:55:43Z<p>Gnu d: /* Wireless */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
/* Please somebody help me put the whole iwconfig output in one block :) */<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
<nowiki> 1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4 </nowiki><br />
<br />
Brightness controls work out of the box. <br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151905Dell Inspiron N50102011-08-14T08:52:29Z<p>Gnu d: /* Wireless */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
[@<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
<br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
<br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
<br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
<br />
Power Management:off<br />
<br />
Link Quality=70/70 Signal level=-32 dBm <br />
<br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
@]<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
<nowiki> 1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4 </nowiki><br />
<br />
Brightness controls work out of the box. <br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151904Dell Inspiron N50102011-08-14T08:49:54Z<p>Gnu d: /* Wireless */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"*******" <br />
<br />
Mode:Managed Frequency:2.427 GHz Access Point: XX:XX:XX:XX:XX:XX <br />
<br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
<br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
<br />
Power Management:off<br />
<br />
Link Quality=70/70 Signal level=-32 dBm <br />
<br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
<nowiki> 1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4 </nowiki><br />
<br />
Brightness controls work out of the box. <br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151902Dell Inspiron N50102011-08-14T08:49:07Z<p>Gnu d: /* Wireless */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<nowiki><br />
<br />
lo no wireless extensions.<br />
<br />
<br />
eth0 no wireless extensions.<br />
<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"TheDude" <br />
<br />
Mode:Managed Frequency:2.427 GHz Access Point: C8:3A:35:34:00:20 <br />
<br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
<br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
<br />
Power Management:off<br />
<br />
Link Quality=70/70 Signal level=-32 dBm <br />
<br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0</nowiki><br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
<nowiki> 1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4 </nowiki><br />
<br />
Brightness controls work out of the box. <br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151901Dell Inspiron N50102011-08-14T08:48:18Z<p>Gnu d: /* Working */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet==<br />
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless==<br />
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<nowiki><br />
lo no wireless extensions.<br />
<br />
eth0 no wireless extensions.<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"TheDude" <br />
Mode:Managed Frequency:2.427 GHz Access Point: C8:3A:35:34:00:20 <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0</nowiki><br />
<br />
<br />
==Bluetooth==<br />
Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA==<br />
Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
==Graphic adapter==<br />
ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio==<br />
Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display==<br />
Available sizes:<br />
<br />
<nowiki> 1366x768 60.0*+<br />
1280x720 59.9 <br />
1152x768 59.8 <br />
1024x768 59.9 <br />
800x600 59.9 <br />
848x480 59.7 <br />
720x480 59.7 <br />
640x480 59.4 </nowiki><br />
<br />
Brightness controls work out of the box. <br />
==Suspending to disk (Hibernation)==<br />
works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)==<br />
works out of the box - tested on KDE 4.7<br />
<br />
==Sensors==<br />
We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151898Dell Inspiron N50102011-08-14T08:46:07Z<p>Gnu d: /* Working */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
==Ethernet== Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
==Wireless== Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
now, reboot or restart the kernel.<br />
<br />
When we issue iwconfig, it should now list wlan0:<br />
<nowiki><br />
lo no wireless extensions.<br />
<br />
eth0 no wireless extensions.<br />
<br />
wlan0 IEEE 802.11bgn ESSID:"TheDude" <br />
Mode:Managed Frequency:2.427 GHz Access Point: C8:3A:35:34:00:20 <br />
Bit Rate=72.2 Mb/s Tx-Power=19 dBm <br />
Retry long limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality=70/70 Signal level=-32 dBm <br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:968 Missed beacon:0</nowiki><br />
<br />
<br />
==Bluetooth== Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
==VGA== Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
==Graphic adapter== ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
==Audio== Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
==Display== 1920x1200/<br />
Brightness controls work out of the box. <br />
==Suspending to disk (Hibernation)== works out of the box - tested on KDE 4.7<br />
==Suspending to ram (Sleep)== works out of the box - tested on KDE 4.7<br />
Sensors: We got 3 sensors:<br />
*radeon-pci-0100<br />
*acpitz-virtual-0<br />
*acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151897Dell Inspiron N50102011-08-14T08:43:51Z<p>Gnu d: /* Working */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
*Ethernet: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
*Wireless: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
<br />
<nowiki>blacklist bcma</nowiki><br />
<br />
now, reboot or restart the kernel.<br />
When we issue iwconfig, it should now list wlan0.<br />
*Bluetooth: Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
*VGA: Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
* Graphic adapter: ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
*Audio: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
*Display: 1920x1200/<br />
Brightness controls work out of the box. <br />
*Suspending to disk (Hibernation) works out of the box - tested on KDE 4.7<br />
*Suspending to ram (Sleep) works out of the box - tested on KDE 4.7<br />
Sensors: We got 3 sensors:<br />
**radeon-pci-0100<br />
**acpitz-virtual-0<br />
**acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151896Dell Inspiron N50102011-08-14T08:43:10Z<p>Gnu d: /* Working */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
*Ethernet: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
*Wireless: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
<br />
<nowiki>blacklist bcma</nowiki><br />
now, reboot or restart the kernel.<br />
When we issue iwconfig, it should now list wlan0.<br />
*Bluetooth: Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
*VGA: Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
* Graphic adapter: ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
*Audio: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
*Display: 1920x1200/<br />
Brightness controls work out of the box. <br />
*Suspending to disk (Hibernation) works out of the box - tested on KDE 4.7<br />
*Suspending to ram (Sleep) works out of the box - tested on KDE 4.7<br />
Sensors: We got 3 sensors:<br />
**radeon-pci-0100<br />
**acpitz-virtual-0<br />
**acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151895Dell Inspiron N50102011-08-14T08:42:18Z<p>Gnu d: /* Working */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
*Ethernet: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
*Wireless: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
<nowiki><br />blacklist bcma<br /></nowiki><br />
now, reboot or restart the kernel.<br />
When we issue iwconfig, it should now list wlan0.<br />
*Bluetooth: Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
*VGA: Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
* Graphic adapter: ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
*Audio: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
*Display: 1920x1200/<br />
Brightness controls work out of the box. <br />
*Suspending to disk (Hibernation) works out of the box - tested on KDE 4.7<br />
*Suspending to ram (Sleep) works out of the box - tested on KDE 4.7<br />
Sensors: We got 3 sensors:<br />
**radeon-pci-0100<br />
**acpitz-virtual-0<br />
**acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151894Dell Inspiron N50102011-08-14T08:41:41Z<p>Gnu d: /* Working */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
*Ethernet: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
*Wireless: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open "/etc/modprobe.d/modprobe.conf" and append the following line:<br />
<nowiki>blacklist bcma</nowiki><br />
now, reboot or restart the kernel.<br />
When we issue iwconfig, it should now list wlan0.<br />
*Bluetooth: Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
*VGA: Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
* Graphic adapter: ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
*Audio: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
*Display: 1920x1200/<br />
Brightness controls work out of the box. <br />
*Suspending to disk (Hibernation) works out of the box - tested on KDE 4.7<br />
*Suspending to ram (Sleep) works out of the box - tested on KDE 4.7<br />
Sensors: We got 3 sensors:<br />
**radeon-pci-0100<br />
**acpitz-virtual-0<br />
**acpi termal zone 0 Temperature<br />
They work out of the box.<br />
<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151892Dell Inspiron N50102011-08-14T08:40:45Z<p>Gnu d: /* To do */</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*eSata test<br />
*HDMI test<br />
*Force acpi/cpufreq to work (somehow :))<br />
<br />
===Working===<br />
*Ethernet: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
*Wireless: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open /etc/modprobe.d/modprobe.conf and append the following line:<br />
blacklist bcma<br />
now, reboot or restart the kernel.<br />
When we issue iwconfig, it should now list wlan0.<br />
*Bluetooth: Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
*VGA: Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
* Graphic adapter: ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
*Audio: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
*Display: 1920x1200/<br />
Brightness controls work out of the box. <br />
*Suspending to disk (Hibernation) works out of the box - tested on KDE 4.7<br />
*Suspending to ram (Sleep) works out of the box - tested on KDE 4.7<br />
Sensors: We got 3 sensors:<br />
**radeon-pci-0100<br />
**acpitz-virtual-0<br />
**acpi termal zone 0 Temperature<br />
They work out of the box.<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=Dell_Inspiron_N5010&diff=151891Dell Inspiron N50102011-08-14T08:39:25Z<p>Gnu d: This is a starting draft, more to come as I experiment with my laptop.</p>
<hr />
<div>[[Category:Dell (English)]]<br />
==Intro==<br />
===Summary===<br />
<br />
<br />
===To do===<br />
*Clean up new wiki. [http://en.wikipedia.org/wiki/Mediawiki MediaWiki] is great but has break all the layout... Need to clean this mess!<br />
*Make swsusp2 work<br />
*Clean up of acpi/cpufreq with the governor chooser<br />
*ACPI daemon and events<br />
*Better kernel configuration display<br />
<br />
===Working===<br />
*Ethernet: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)<br />
Works out of the box.<br />
*Wireless: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)<br />
In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we've to blacklist some modules.<br />
<br />
So open /etc/modprobe.d/modprobe.conf and append the following line:<br />
blacklist bcma<br />
now, reboot or restart the kernel.<br />
When we issue iwconfig, it should now list wlan0.<br />
*Bluetooth: Both pairing, sending files and receiving files works out of the box, tested with blueman. <br />
*VGA: Tested on an external CRT monitor, works out of the box on KDE 4.7<br />
* Graphic adapter: ATI Mobility Radeon HD 5600<br />
working out of the box. <br />
*Audio: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio<br />
*Display: 1920x1200/<br />
Brightness controls work out of the box. <br />
*Suspending to disk (Hibernation) works out of the box - tested on KDE 4.7<br />
*Suspending to ram (Sleep) works out of the box - tested on KDE 4.7<br />
Sensors: We got 3 sensors:<br />
**radeon-pci-0100<br />
**acpitz-virtual-0<br />
**acpi termal zone 0 Temperature<br />
They work out of the box.<br />
===Partially Working===<br />
<br />
===Not Working===<br />
Processor frequency control - says unsupported I think:<nowiki><br />
:: Setting cpufreq governing rules [BUSY] grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory<br />
, cpu 0wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
1wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
2wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
3wrong, unknown or unhandled CPU?<br />
Error setting new values. Common errors:<br />
- Do you have proper administration rights? (super-user?)<br />
- Is the governor you requested available and modprobed?<br />
- Trying to set an invalid policy?<br />
- Trying to set a specific frequency, but userspace governor is not available,<br />
for example because of hardware which cannot be set to a specific frequency<br />
or because the userspace governor isn't loaded?<br />
[DONE]</nowiki> <br />
===Unknown / Untested===<br />
HDMI Video<br />
Redwood HDMI Audio 5600<br />
eSata port<br />
<br />
==Installation==<br />
To do<br />
<br />
==Kernel==<br />
<br />
===ATI Mobility Raedon 5600===<br />
To do: Synaptic guide<br />
<br />
==Troubleshoot==<br />
*On boot the following error is printed:<br />
boot error : intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled<br />
Workaround: Blacklist the intel_ips module, open configuration file "/etc/modprobe.d/modprobe.conf" and add:<br />
<nowiki>blacklist intel_ips</nowiki><br />
==Links==<br />
===General===<br />
<br />
* [https://bugs.archlinux.org/task/25439]<br />
* [https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104]</div>Gnu dhttps://wiki.archlinux.org/index.php?title=GNOME/Evolution&diff=67173GNOME/Evolution2009-04-19T16:26:49Z<p>Gnu d: /* Hacks little text formating */</p>
<hr />
<div>[[Category:Internet and Email (English)]]<br />
[[Category:HOWTOs (English)]]<br />
<br />
<br />
== Evolution ==<br />
<br />
Evolution is a GNOME mail client it supports IMAP, Microsoft Exchange Server and Novell GroupWise. It also has a calender function that supports vcal,csv, google calendar and many more. You can also organise your contacts, tasks and memo's with Evolution. The beatifull thing about evolution is that it's easy in use and integrates with the gnome enviroment. You can see your calendar, tasks and location in the GNOME panel also the weather and date. Just add the clock to your gnome panel.<br />
<br />
== Installation ==<br />
<br />
Evolution is available from the standard repositories: <br />
#pacman -S evolution<br />
<br />
Support for exchange servers:<br />
#pacman -S evolution-exchange<br />
<br />
== IMAP Setup ==<br />
<br />
This is the setup for a standard IMAP mail adress.<br />
Go to Edit -> Preferences -> Mail Accounts. Add a mail account insert your Name and real email adress. Then click 'forward' here you are going to select the server type, this is IMAP. Now fill in the textbox server, for the server adress and username. For the rest of the options just follow the wizard. It is very easy, if you get stuck read this guide [http://library.gnome.org/users/evolution/stable/].<br />
<br />
== GMAIL Setup ==<br />
<br />
Setting up gmail for evolution is very easy.<br />
Go to Edit -> Preferences -> Mail Accounts and make a mail account. For your Email Adress: <username>@gmail.com . Now press forward<br />
Use this configuration<br />
Server type: POP<br />
Server: pop.gmail.com<br />
Username: <username>@gmail.com<br />
Use Secure Connecetion: SSL encryption<br />
Authenthication Type: password<br />
<br />
Now go to the next step:<br />
<br />
Optionally fill in automatically check for new mail every ** minutes.<br />
The rest is user specific.<br />
<br />
Go to the next Step<br />
<br />
Server type: SMTP<br />
Server: smtp.gmail.com<br />
Flag: server requires authentication<br />
Use Secure Connection: SSL<br />
Fill in Username: <username>@gmail.com<br />
<br />
You are now finished with configuring evolution for gmail. Just hit Send/ Receive in the main screen and wait for new mail.<br />
If it still didn't work, go to this link [http://tuxicity.wordpress.com/2007/03/08/howto-set-up-gmail-in-evolution-gnomes-mail-client-and-organizer/]<br />
<br />
<br />
== Gmail Calendar ==<br />
<br />
You can use your gmail calendar in evolution here's how:<br />
<br />
Go to your calendar in your browser. Click on manage calendars -> the click on the calendar you want to add -> In the Private URL section copy the URL of ICAL (green button).<br />
<br />
Now go to Evolution. Click on file -> new -> calendar .<br />
In the 'new calendar dialog box' select type: On The Web.<br />
You can fill in your own calendar name <br />
Then Copy the URL to the URL field <br />
<br />
Now you will see your google calendar in your calendar view in Evolution by the name you gave it in the Name field.<br />
<br />
== Tudelft webmail (Exchange) ==<br />
<br />
This is the setup for your tudelft webmail for evolution. It might also work for other webmail based email accounts.<br />
<br />
Go to Edit -> Preferences -> Mail Accounts and make a mail account. For your Email Adress: <netid>@gmail.com . Be carefull your <netid>@student.tudelft.nl must be like this example: E.M.devries@student.tudelft.nl <br />
<br />
Receiving mail:<br />
Server type: Microsoft Exchange <br />
Username: <netid> this is just your netid like this example: edevries<br />
OWA URL: https://webmail.tudelft.nl -> now click 'Authenticate' and fill in your password. The mailbox will be filled in automaticlly<br />
<br />
Click Forward:<br />
The receiving options are already correct, you can select the option to automaticlly receive email every x minutes.<br />
<br />
Click Forward:<br />
Now just fill in the name of the mailbox and you are done.<br />
<br />
<br />
<br />
== References ==<br />
<br />
[http://library.gnome.org/users/evolution/stable/ Gnome Evolution Guide]<br />
[http://www.tudelft.nl/live/pagina.jsp?id=babae0a3-1479-4501-9ec4-e308153735dc&lang=nl Tudelft Evolution 2.24 Setup]<br />
<br />
Hacking (section)<br />
<!-- Change the title :D, please. --><br />
<br />
If after some system upgrade one gets no accounts in Evolution than all is not lost.<br />
First, we can see if we got our account files in ~/.evolution/, if so, then the only solution is to just make a new account in Evolution with the same parameters. (I only lost the signatures).<br />
<br />
== Hacks == <!-- Please change the title :D, please --><br />
<br />
If after some system upgrade one gets no accounts in Evolution than all is not lost.<br/><br />
First, we can see if we got our account files in ~/.evolution/, if so, then the<br/><br />
only solution is to just make a new account in Evolution with the same parameters.<br/> <br />
(I only lost the signatures).=</div>Gnu dhttps://wiki.archlinux.org/index.php?title=GNOME/Evolution&diff=67172GNOME/Evolution2009-04-19T16:21:48Z<p>Gnu d: /* Hacks */</p>
<hr />
<div>[[Category:Internet and Email (English)]]<br />
[[Category:HOWTOs (English)]]<br />
<br />
<br />
== Evolution ==<br />
<br />
Evolution is a GNOME mail client it supports IMAP, Microsoft Exchange Server and Novell GroupWise. It also has a calender function that supports vcal,csv, google calendar and many more. You can also organise your contacts, tasks and memo's with Evolution. The beatifull thing about evolution is that it's easy in use and integrates with the gnome enviroment. You can see your calendar, tasks and location in the GNOME panel also the weather and date. Just add the clock to your gnome panel.<br />
<br />
== Installation ==<br />
<br />
Evolution is available from the standard repositories: <br />
#pacman -S evolution<br />
<br />
Support for exchange servers:<br />
#pacman -S evolution-exchange<br />
<br />
== IMAP Setup ==<br />
<br />
This is the setup for a standard IMAP mail adress.<br />
Go to Edit -> Preferences -> Mail Accounts. Add a mail account insert your Name and real email adress. Then click 'forward' here you are going to select the server type, this is IMAP. Now fill in the textbox server, for the server adress and username. For the rest of the options just follow the wizard. It is very easy, if you get stuck read this guide [http://library.gnome.org/users/evolution/stable/].<br />
<br />
== GMAIL Setup ==<br />
<br />
Setting up gmail for evolution is very easy.<br />
Go to Edit -> Preferences -> Mail Accounts and make a mail account. For your Email Adress: <username>@gmail.com . Now press forward<br />
Use this configuration<br />
Server type: POP<br />
Server: pop.gmail.com<br />
Username: <username>@gmail.com<br />
Use Secure Connecetion: SSL encryption<br />
Authenthication Type: password<br />
<br />
Now go to the next step:<br />
<br />
Optionally fill in automatically check for new mail every ** minutes.<br />
The rest is user specific.<br />
<br />
Go to the next Step<br />
<br />
Server type: SMTP<br />
Server: smtp.gmail.com<br />
Flag: server requires authentication<br />
Use Secure Connection: SSL<br />
Fill in Username: <username>@gmail.com<br />
<br />
You are now finished with configuring evolution for gmail. Just hit Send/ Receive in the main screen and wait for new mail.<br />
If it still didn't work, go to this link [http://tuxicity.wordpress.com/2007/03/08/howto-set-up-gmail-in-evolution-gnomes-mail-client-and-organizer/]<br />
<br />
<br />
== Gmail Calendar ==<br />
<br />
You can use your gmail calendar in evolution here's how:<br />
<br />
Go to your calendar in your browser. Click on manage calendars -> the click on the calendar you want to add -> In the Private URL section copy the URL of ICAL (green button).<br />
<br />
Now go to Evolution. Click on file -> new -> calendar .<br />
In the 'new calendar dialog box' select type: On The Web.<br />
You can fill in your own calendar name <br />
Then Copy the URL to the URL field <br />
<br />
Now you will see your google calendar in your calendar view in Evolution by the name you gave it in the Name field.<br />
<br />
== Tudelft webmail (Exchange) ==<br />
<br />
This is the setup for your tudelft webmail for evolution. It might also work for other webmail based email accounts.<br />
<br />
Go to Edit -> Preferences -> Mail Accounts and make a mail account. For your Email Adress: <netid>@gmail.com . Be carefull your <netid>@student.tudelft.nl must be like this example: E.M.devries@student.tudelft.nl <br />
<br />
Receiving mail:<br />
Server type: Microsoft Exchange <br />
Username: <netid> this is just your netid like this example: edevries<br />
OWA URL: https://webmail.tudelft.nl -> now click 'Authenticate' and fill in your password. The mailbox will be filled in automaticlly<br />
<br />
Click Forward:<br />
The receiving options are already correct, you can select the option to automaticlly receive email every x minutes.<br />
<br />
Click Forward:<br />
Now just fill in the name of the mailbox and you are done.<br />
<br />
<br />
<br />
== References ==<br />
<br />
[http://library.gnome.org/users/evolution/stable/ Gnome Evolution Guide]<br />
[http://www.tudelft.nl/live/pagina.jsp?id=babae0a3-1479-4501-9ec4-e308153735dc&lang=nl Tudelft Evolution 2.24 Setup]<br />
<br />
Hacking (section)<br />
<!-- Change the title :D, please. --><br />
<br />
If after some system upgrade one gets no accounts in Evolution than all is not lost.<br />
First, we can see if we got our account files in ~/.evolution/, if so, then the only solution is to just make a new account in Evolution with the same parameters. (I only lost the signatures).<br />
<br />
== Hacks == <!-- Please change the title :D, please --><br />
<br />
If after some system upgrade one gets no accounts in Evolution than all is not lost.<br />
First, we can see if we got our account files in ~/.evolution/, if so, then the only solution is to just make a new account in Evolution with the same parameters. (I only lost the signatures).</div>Gnu dhttps://wiki.archlinux.org/index.php?title=GNOME/Evolution&diff=67171GNOME/Evolution2009-04-19T16:21:16Z<p>Gnu d: /* References */ I couldn't edit the page globally so I just appanded to the last section</p>
<hr />
<div>[[Category:Internet and Email (English)]]<br />
[[Category:HOWTOs (English)]]<br />
<br />
<br />
== Evolution ==<br />
<br />
Evolution is a GNOME mail client it supports IMAP, Microsoft Exchange Server and Novell GroupWise. It also has a calender function that supports vcal,csv, google calendar and many more. You can also organise your contacts, tasks and memo's with Evolution. The beatifull thing about evolution is that it's easy in use and integrates with the gnome enviroment. You can see your calendar, tasks and location in the GNOME panel also the weather and date. Just add the clock to your gnome panel.<br />
<br />
== Installation ==<br />
<br />
Evolution is available from the standard repositories: <br />
#pacman -S evolution<br />
<br />
Support for exchange servers:<br />
#pacman -S evolution-exchange<br />
<br />
== IMAP Setup ==<br />
<br />
This is the setup for a standard IMAP mail adress.<br />
Go to Edit -> Preferences -> Mail Accounts. Add a mail account insert your Name and real email adress. Then click 'forward' here you are going to select the server type, this is IMAP. Now fill in the textbox server, for the server adress and username. For the rest of the options just follow the wizard. It is very easy, if you get stuck read this guide [http://library.gnome.org/users/evolution/stable/].<br />
<br />
== GMAIL Setup ==<br />
<br />
Setting up gmail for evolution is very easy.<br />
Go to Edit -> Preferences -> Mail Accounts and make a mail account. For your Email Adress: <username>@gmail.com . Now press forward<br />
Use this configuration<br />
Server type: POP<br />
Server: pop.gmail.com<br />
Username: <username>@gmail.com<br />
Use Secure Connecetion: SSL encryption<br />
Authenthication Type: password<br />
<br />
Now go to the next step:<br />
<br />
Optionally fill in automatically check for new mail every ** minutes.<br />
The rest is user specific.<br />
<br />
Go to the next Step<br />
<br />
Server type: SMTP<br />
Server: smtp.gmail.com<br />
Flag: server requires authentication<br />
Use Secure Connection: SSL<br />
Fill in Username: <username>@gmail.com<br />
<br />
You are now finished with configuring evolution for gmail. Just hit Send/ Receive in the main screen and wait for new mail.<br />
If it still didn't work, go to this link [http://tuxicity.wordpress.com/2007/03/08/howto-set-up-gmail-in-evolution-gnomes-mail-client-and-organizer/]<br />
<br />
<br />
== Gmail Calendar ==<br />
<br />
You can use your gmail calendar in evolution here's how:<br />
<br />
Go to your calendar in your browser. Click on manage calendars -> the click on the calendar you want to add -> In the Private URL section copy the URL of ICAL (green button).<br />
<br />
Now go to Evolution. Click on file -> new -> calendar .<br />
In the 'new calendar dialog box' select type: On The Web.<br />
You can fill in your own calendar name <br />
Then Copy the URL to the URL field <br />
<br />
Now you will see your google calendar in your calendar view in Evolution by the name you gave it in the Name field.<br />
<br />
== Tudelft webmail (Exchange) ==<br />
<br />
This is the setup for your tudelft webmail for evolution. It might also work for other webmail based email accounts.<br />
<br />
Go to Edit -> Preferences -> Mail Accounts and make a mail account. For your Email Adress: <netid>@gmail.com . Be carefull your <netid>@student.tudelft.nl must be like this example: E.M.devries@student.tudelft.nl <br />
<br />
Receiving mail:<br />
Server type: Microsoft Exchange <br />
Username: <netid> this is just your netid like this example: edevries<br />
OWA URL: https://webmail.tudelft.nl -> now click 'Authenticate' and fill in your password. The mailbox will be filled in automaticlly<br />
<br />
Click Forward:<br />
The receiving options are already correct, you can select the option to automaticlly receive email every x minutes.<br />
<br />
Click Forward:<br />
Now just fill in the name of the mailbox and you are done.<br />
<br />
<br />
<br />
== References ==<br />
<br />
[http://library.gnome.org/users/evolution/stable/ Gnome Evolution Guide]<br />
[http://www.tudelft.nl/live/pagina.jsp?id=babae0a3-1479-4501-9ec4-e308153735dc&lang=nl Tudelft Evolution 2.24 Setup]<br />
<br />
Hacking (section)<br />
<!-- Change the title :D, please. --><br />
<br />
If after some system upgrade one gets no accounts in Evolution than all is not lost.<br />
First, we can see if we got our account files in ~/.evolution/, if so, then the only solution is to just make a new account in Evolution with the same parameters. (I only lost the signatures).<br />
<br />
== Hacks == <!-- Please change the title :D, please --><br />
<br />
If after some system upgrade one gets no accounts in Evolution than all is not lost.<br />
First, we can see if we got our account files in ~/.evolution/, if so, then the only solution is to just make a new account in Evolution with the same parameters. (I only lost the signatures).</div>Gnu dhttps://wiki.archlinux.org/index.php?title=GNOME/Evolution&diff=67170GNOME/Evolution2009-04-19T16:17:56Z<p>Gnu d: /* References */</p>
<hr />
<div>[[Category:Internet and Email (English)]]<br />
[[Category:HOWTOs (English)]]<br />
<br />
<br />
== Evolution ==<br />
<br />
Evolution is a GNOME mail client it supports IMAP, Microsoft Exchange Server and Novell GroupWise. It also has a calender function that supports vcal,csv, google calendar and many more. You can also organise your contacts, tasks and memo's with Evolution. The beatifull thing about evolution is that it's easy in use and integrates with the gnome enviroment. You can see your calendar, tasks and location in the GNOME panel also the weather and date. Just add the clock to your gnome panel.<br />
<br />
== Installation ==<br />
<br />
Evolution is available from the standard repositories: <br />
#pacman -S evolution<br />
<br />
Support for exchange servers:<br />
#pacman -S evolution-exchange<br />
<br />
== IMAP Setup ==<br />
<br />
This is the setup for a standard IMAP mail adress.<br />
Go to Edit -> Preferences -> Mail Accounts. Add a mail account insert your Name and real email adress. Then click 'forward' here you are going to select the server type, this is IMAP. Now fill in the textbox server, for the server adress and username. For the rest of the options just follow the wizard. It is very easy, if you get stuck read this guide [http://library.gnome.org/users/evolution/stable/].<br />
<br />
== GMAIL Setup ==<br />
<br />
Setting up gmail for evolution is very easy.<br />
Go to Edit -> Preferences -> Mail Accounts and make a mail account. For your Email Adress: <username>@gmail.com . Now press forward<br />
Use this configuration<br />
Server type: POP<br />
Server: pop.gmail.com<br />
Username: <username>@gmail.com<br />
Use Secure Connecetion: SSL encryption<br />
Authenthication Type: password<br />
<br />
Now go to the next step:<br />
<br />
Optionally fill in automatically check for new mail every ** minutes.<br />
The rest is user specific.<br />
<br />
Go to the next Step<br />
<br />
Server type: SMTP<br />
Server: smtp.gmail.com<br />
Flag: server requires authentication<br />
Use Secure Connection: SSL<br />
Fill in Username: <username>@gmail.com<br />
<br />
You are now finished with configuring evolution for gmail. Just hit Send/ Receive in the main screen and wait for new mail.<br />
If it still didn't work, go to this link [http://tuxicity.wordpress.com/2007/03/08/howto-set-up-gmail-in-evolution-gnomes-mail-client-and-organizer/]<br />
<br />
<br />
== Gmail Calendar ==<br />
<br />
You can use your gmail calendar in evolution here's how:<br />
<br />
Go to your calendar in your browser. Click on manage calendars -> the click on the calendar you want to add -> In the Private URL section copy the URL of ICAL (green button).<br />
<br />
Now go to Evolution. Click on file -> new -> calendar .<br />
In the 'new calendar dialog box' select type: On The Web.<br />
You can fill in your own calendar name <br />
Then Copy the URL to the URL field <br />
<br />
Now you will see your google calendar in your calendar view in Evolution by the name you gave it in the Name field.<br />
<br />
== Tudelft webmail (Exchange) ==<br />
<br />
This is the setup for your tudelft webmail for evolution. It might also work for other webmail based email accounts.<br />
<br />
Go to Edit -> Preferences -> Mail Accounts and make a mail account. For your Email Adress: <netid>@gmail.com . Be carefull your <netid>@student.tudelft.nl must be like this example: E.M.devries@student.tudelft.nl <br />
<br />
Receiving mail:<br />
Server type: Microsoft Exchange <br />
Username: <netid> this is just your netid like this example: edevries<br />
OWA URL: https://webmail.tudelft.nl -> now click 'Authenticate' and fill in your password. The mailbox will be filled in automaticlly<br />
<br />
Click Forward:<br />
The receiving options are already correct, you can select the option to automaticlly receive email every x minutes.<br />
<br />
Click Forward:<br />
Now just fill in the name of the mailbox and you are done.<br />
<br />
<br />
<br />
== References ==<br />
<br />
[http://library.gnome.org/users/evolution/stable/ Gnome Evolution Guide]<br />
[http://www.tudelft.nl/live/pagina.jsp?id=babae0a3-1479-4501-9ec4-e308153735dc&lang=nl Tudelft Evolution 2.24 Setup]<br />
<br />
== Hacks == <!-- Please change the title :D, please --><br />
<br />
If after some system upgrade one gets no accounts in Evolution than all is not lost.<br />
First, we can see if we got our account files in ~/.evolution/, if so, then the only solution is to just make a new account in Evolution with the same parameters. (I only lost the signatures).</div>Gnu d