https://wiki.archlinux.org/api.php?action=feedcontributions&user=Nirev&feedformat=atomArchWiki - User contributions [en]2024-03-28T18:04:14ZUser contributionsMediaWiki 1.41.0https://wiki.archlinux.org/index.php?title=Dm-crypt&diff=170933Dm-crypt2011-11-23T13:00:17Z<p>Nirev: /* Install Bootloader */</p>
<hr />
<div>[[Category:Security (English)]]<br />
[[Category:File systems (English)]]<br />
{{i18n|System Encryption with LUKS for dm-crypt}}<br />
{{Article summary start}}<br />
{{Article summary text|This tutorial will show you how to set up system encryption with LUKS for dm-crypt.}}<br />
{{Article summary end}}<br />
<br />
== Introduction ==<br />
=== Why Use Encryption? ===<br />
<br />
In the simplest terms encryption is a method for establishing privacy. <br />
<br />
There are presently two approaches to partition level encryption '''data encryption''' and '''system encryption'''.<br />
<br />
'''Data encryption''', defined as encrypting a users data, provides for many benefits including: <br />
<br />
::*Preventing unauthorized physical access to private data.<br />
::*Some confidence in data disposal when discarding obsolete systems.<br />
<br />
However data encryption alone has some significant drawbacks. In modern computing systems, there are many background processes that may store information about encrypted data or parts of the encrypted data itself in non-encrypted areas of the hard drive. Thus reducing the effectiveness of any data encryption system in place.<br />
<br />
'''System encryption''', defined as the encryption of the operating system and user data, helps to address some of the inadequacies of data encryption. The benefits of system encryption over data encryption alone include:<br />
<br />
::*Preventing unauthorized physical access to operating system files<br />
::*Preventing unauthorized physical access to private data that may cached by the system.<br />
<br />
In the context of overall system security, system encryption should be viewed as an adjunct to the existing security mechanisms of the operating system that focuses on physical attempts to breach system security which includes:<br />
<br />
::*Attempts to bypass the operating system by inserting a boot CD/USB<br />
::*Copying, modifying, or removing the hard disk drives when the computer is off<br />
<br />
Despite the use of system encryption, there are still points of physical insecurity. These issues revolve around the {{ic|/boot}} partition which must remain unencrypted in order for the machine to properly boot. However, system encryption is presently the best way to minimize the loss of data privacy by physical attempts at invasion.<br />
<br />
{{Warning|Any encryption method employed is only as good as its associated key management. Partition level encryption does not protect you from all forms of security compromise. There are ways to break into computers while they are powered on that are unaffected by disk level encryption. Read the [[System Encryption with LUKS for dm-crypt#Caveats | caveats]] section below!}}<br />
<br />
=== What Methods are Available for System Encryption? ===<br />
<br />
There are multiple current methods that can be employed for system encryption, including:<br />
<br />
;loop-AES ([http://loop-aes.sourceforge.net/ loop-AES]):loop-AES is a descendant of cryptoloop and is a secure and fast solution to system encryption.<br />
:However loop-AES is considered less user-friendly than other options as it requires non-standard kernel support.<br />
<br />
;standard device-mapper encryption ([http://www.saout.de/misc/dm-crypt/ dm-crypt]):This is the standard device mapper which can be used for those who like to have control over all aspects partition management.<br />
<br />
;LUKS for dm-crypt ([http://code.google.com/p/cryptsetup/ LUKS]):LUKS stores all of the needed setup information for dm-crypt on the disk itself and abstracts partition and key management in an attempt to improve ease of use.<br />
<br />
:Briefly some key features that LUKS provides include:<br />
<br />
::*Support for either passphrase or keyfiles as encryption keys<br />
::*Per partition key creation and revocation<br />
::*Multiple passphrases or keyfiles for a particular partition<br />
<br />
=== Caveats ===<br />
<br />
For any type of encryption the security of your privacy is dependent on two things:<br />
<br />
::*The complexity/availability of your key (see [[Wikipedia:Kerckhoffs's principle]])<br />
::*The usage of a proven encryption algorithm<br />
<br />
====Key Complexity and Availability====<br />
<br />
The user provided key used for encryption, whether a passphrase or a keyfile, must be complex enough that is it not easy to guess. Having a strong encryption algorithm does nothing to provide privacy if the key used for encryption is too simple. The tenets of strong keys are based on length and randomness. There are many sources available with instructions on how to create strong encryption keys. <br />
<br />
Part of key complexity is key availability. For example a complex key written on a sticky note pasted to the computer's keyboard would not provide much in the way privacy. Therefore in addition to creating a strong key, maintaining it in a secure location is necessary as well.<br />
<br />
====Encryption Algorithm====<br />
<br />
There are many peer-reviewed encryption algorithms in existence. The encryption algorithms and block ciphers used in any of the mentioned methods for applying encryption in this wiki page are considered strong algorithms that have been subjected to cryptographic review by the cryptography community.<br />
<br />
====discard/TRIM support for solid state disks====<br />
<br />
Solid state disk users should be aware that by default, Linux's full-disk encryption mechanisms will ''not'' forward TRIM commands from the filesystem to the underlying disk. The device-mapper maintainers have made it clear that TRIM support will never be enabled by default on dm-crypt devices because of the potential security implications; if TRIM support were enabled, an attacker may be able to tell which blocks have been used, how many blocks have been used, and other information that is exposed directly to the device when a TRIM is issued.<br />
<br />
It may be possible to determine the filesystem utilized by your encrypted device through the data that is leaked by TRIM. Furthermore, any information that may be derived by a profile of block usage may be exposed by enabling TRIM support on an encrypted device.<br />
<br />
As of {{Pkg|linux}} version 3.1, support for dm-crypt TRIM pass-through can be toggled upon device creation or mount with dmsetup. Support for this option also exists in {{Pkg|cryptsetup}} version 1.4.0 and up. This configuration has not been thoroughly tested. It is strongly advised that users who are not willing to lose data in this process wait until official userspace support is realized. A testing package of cryptsetup already supports this. You need to install the newest {{Pkg|cryptsetup}} (at least cryptsetup-1.4.0-1) and append "{{ic|:allow-discards}}" to the cryptdevice option. The option should look like this then:<br />
cryptdevice=/dev/mapper/root:root:allow-discards<br />
<br />
For more information, including specific commands and details on dm-crypt TRIM pass-through, see these mailing list threads:<br />
* http://article.gmane.org/gmane.linux.kernel.device-mapper.devel/14134<br />
* http://article.gmane.org/gmane.linux.kernel.device-mapper.dm-crypt/5166<br />
<br />
==== System Encryption ====<br />
<br />
System encryption provides security against unauthorized physical access to a machine that is powered off. It does not effect any security advantages for a system that is powered on with its partitions mounted in an unencrypted state. For a powered on user accessible system the normal precautions to prevent viruses, trojans, worms, or other attempts to access private data should be exercised. Furthermore, system encryption has been shown to be penetrable in cases where a system has been recently shutdown. This is due to the fact that cessation of power does not immediately degrade data that was stored in RAM prior to shutdown. Therefore someone with physical access to your computer within a few moments of shutdown could cool the RAM modules and use them extract your encryption key - thus obtaining access to your data.<br />
<br />
{{Note|System Encryption assume encryption of all mounted partitions this includes all partitions except for {{ic|/boot}} - meaning that the root file system, swap partition, and all other partitions must be encrypted. If the swap, {{ic|/tmp}}, or root filesystems are unencrypted, only Data Encryption level of security has been accomplished.}}<br />
<br />
==== Data Encryption ====<br />
<br />
There are two common forms of data encryption:<br />
<br />
::*Encryption of data partitions on the same physical disk as the system.<br />
::*Encryption of data partitions on separate physical disks from the system.<br />
<br />
=====Encryption of data partitions on the same physical disk as the system=====<br />
<br />
The most common form of data encryption is encrypting the {{ic|/home}} partition.<br />
<br />
In cases where the encrypted data are located on the same physical disk as the system accessing the drive the privacy of data has already been decreased by orders of magnitude when compared to system encryption. The reason for this is that the host operating systems employ background methods to assist the user in the access and management of their data. The problem lies in where these processes store this data which is most commonly in the unencrypted system partition. <br />
<br />
For example, {{Pkg|mlocate}} will scan all currently mounted file systems regularly and write the list of filenames to {{ic|/var/lib/mlocate/mlocate.db}}, which is located in the non-encrypted root or {{ic|/var}} partition. Thus an attacker will have a list of all filenames for that computer, even the ones on the encrypted {{ic|/home}} partition, readily available to assist them in accessing the encrypted data present on the disk.<br />
<br />
Some have compared this to reducing the level of security from partition-based encryption to filesystem level encryption like [[System_Encryption_with_eCryptfs|System Encryption with eCryptfs]].<br />
<br />
=====Encryption of data partitions on separate physical disks from the system=====<br />
<br />
Popular forms of data encryption on physically separate partitions include the encryption of removable media such as:<br />
<br />
::*USB Flash Drives<br />
::*External Hard Disk Drives or Separate Internal Hard Disk Drives<br />
::*CD/DVD/Blu-Ray Optical Media<br />
::*Magnetic Storage Media<br />
<br />
The most important part of this form of data encryption is to remember that the encryption protects the privacy of the data that is located within the encrypted media only when it is not mounted. Data encryption does not protect the privacy of data once it is made accessible to a system. For example, attaching an encrypted USB flash drive, and subsequently decrypting a file for use temporarily on a non-secured system could result in remnants of that file existing on the host system in an unencrypted form.<br />
<br />
== Initial Setup ==<br />
=== Overview and Preparation ===<br />
<br />
The Arch installer comes with all the tools required for system encryption. Setup of encrypted partitions can be accomplished either manually prior to executing the arch installer or using the menu interface from the arch installer itself. The installation of an encrypted system is largely the same as installing an unencrypted system, so you can follow the [[Official Arch Linux Install Guide]] or the [[Beginners' Guide]] after the encrypted partitions are setup.<br />
<br />
Routine creation of an encrypted system follows these general steps:<br />
<br />
::* Secure erasure of the harddisk drive(s)<br />
::* Partitioning and setup of encryption ([[LVM]] optional)<br />
::* Routine package selection and installation<br />
::* System Configuration<br />
<br />
{{Warning | Encrypting a partition will erase everything currently on that partition. Please make appropriate data backups prior to starting.}}<br />
<br />
=== Secure Erasure of the Hard Disk Drive ===<br />
<br />
Secure erasure of the hard disk drive involves overwriting the entire drive with random data.<br />
<br />
{{Note|Overwriting a hard disk drive ''multiple'' times with random data serves no purpose. Data existing prior to overwriting cannot be recovered after it has been overwritten. [http://www.springerlink.com/content/408263ql11460147/ Overwriting Hard Drive Data: The Great Wiping Controversy]}}<br />
<br />
====Why perform secure of erasure of a drive?====<br />
<br />
There are two types of hard disk drives, new and used, both kinds should be securely overwritten. The reasoning is slightly different for each but the goal is to help ensure the privacy of data located within the encrypted partitions.<br />
<br />
::'''New Hard Disk Drives'''<br />
<br />
::In hard drives that have been directly purchased from a manufacturer there is no preexisting private data to protect. The problem is that there is no consistency in what is presently on the drive. Ideally the drive should be completely filled with random bits. However some drives have been overwritten completely with zeros. Therefore once the drive is used to write encrypted data, it is relatively simple to identify where the encrypted data ends and the zeroed data begins compared to a drive that was written with random data before usage as an encrypted drive. Since an encrypted partition is supposed to be indistinguishable from random data, the lack of random data on a zeroed drive makes an encrypted drive an easier target for cryptanalysis.<br />
<br />
::'''Used Hard Disk Drives'''<br />
<br />
::Repartitioning or reformatting a used hard drive removes the file system structure for identifying where the original data was located while leaving the actual data intact on the drive itself. It is relatively straight forward using data tools like [http://foremost.sourceforge.net/ Foremost] to access the remnant data. Therefore hard drives should be securely overwritten with random data prior to encryption to prevent unintentional data recovery.<br />
<br />
====Overwriting a hard disk drive with random data====<br />
<br />
There are two sources of random data commonly used for securely overwritting hard disk partitions.<br />
<br />
::*{{ic|/dev/urandom}}<br />
::*badblocks<br />
<br />
=====Using urandom=====<br />
<br />
#dd if=/dev/urandom of=/dev/<drive> bs=1M<br />
<br />
Where {{ic|/dev/<drive>}} is the drive to be encrypted.<br />
<br />
{{Note| Using {{ic|/dev/urandom}} will take a long time to completely overwrite a drive with "random" data. In the strictest sense, {{ic|/dev/urandom}} is less random than {{ic|/dev/random}}; however, {{ic|/dev/random}} uses the kernel entropy pool and will halt overwriting until more input entropy once this pool has been exhausted. This makes the use of {{ic|/dev/random}} for overwriting hard disks impractical.}}<br />
<br />
{{Note| Users may also find that {{ic|/dev/urandom}} takes an excessively long time on large drives of several hundred gigabytes or more (more than twenty-four hours). [[Frandom]] offers a faster alternative.}}<br />
<br />
=====Using badblocks=====<br />
<br />
#badblocks -c 10240 -wsvt random /dev/<drive><br />
<br />
Where {{ic|/dev/<drive>}} is the drive to be encrypted.<br />
<br />
{{Note|The {{ic|badblocks}} command overwrites the drive at a much faster rate by generating data that is not truly random.}}<br />
<br />
See also [[badblocks]].<br />
<br />
{{Tip|In deciding which method to use for secure erasure of a hard disk drive, remember that this will not need to be performed more than once for as long as the drive is used as an encrypted drive.}}<br />
<br />
=== Partitioning ===<br />
<br />
After the drive has been securely overwritten, it is time to create partitions and begin setting up an encrypted system.<br />
<br />
There are multiple ways to create disk partitions:<br />
<br />
::*Standard partitions<br />
::*[[LVM]]<br />
::*[[RAID]]<br />
<br />
LUKS is compatible in systems that require both LVM and/or RAID as well as with with standard primary, extended, and logical partitions.<br />
<br />
====Standard Partitions====<br />
<br />
These are the partitions that most people are familiar with. They come in 3 flavors: primary partitions, extended partitions, and logical partitions.<br />
<br />
;Primary Partitions: These are the normal partitions recognized by the system BIOS. There can be up to 4 of these stored in the MBR.<br />
<br />
;Extended Partitions: These are primary partitions that also define another partition within themselves. Extended partitions were created to work around the original 4 partition limit of primary partitions.<br />
<br />
;Logical Partitions: These are the partitions that are defined within extended partitions.<br />
<br />
====LVM: Logical Volume Manager====<br />
<br />
The LVM allows for creation of volume groups for systems that require complex combinations of multiple hard disk drives and partitions that are not possible with standard partitions. LVM is covered in detail in the [[LVM|Arch Linux LVM Wiki Article]] which is recommended reading prior to continuing with the instructions on setting up LUKS with LVM located below.<br />
<br />
====How does LVM fit into the overall system?====<br />
<br />
There is a growing preference towards logical volume management of LUKS encrypted physical media (LVM on LUKS). It is possible there may exist usage scenarios where encrypting logical volumes rather than physical disks is required (LUKS on LVM). However, the deployment of LVM on LUKS is considered much more generalizable. One reason for this is that using LUKS as the lowest level of infrastructure most closely approximates the deployment of physical disks with built-in hardware encryption. In which case, logical volume management would be layered on top of the hardware encryption -- usage of LUKS would be superfluous.<br />
<br />
==== Creating Disk Partitions ====<br />
<br />
Disk partitions are created using:<br />
<br />
# cfdisk<br />
<br />
This will display a graphical interface for creating disk partitions.<br />
<br />
There are 2 required partitions for any encrypted system:<br />
<br />
::A root file system<br />
<br />
:::*{{ic|'''/'''}}<br />
:::*Will be encrypted and store all system and user files ({{ic|/usr}}, {{ic|/bin}}, {{ic|/var}}, {{ic|/home}}, etc.)<br />
<br />
::An initial boot partition<br />
<br />
:::*{{ic|'''/boot'''}}<br />
:::*Will ''not'' be encrypted; the bootloader needs to access the {{ic|/boot}} directory where it will load the initramfs/encryption modules needed to load the rest of the system which ''is'' encrypted (see [[Mkinitcpio]] for details). For this reason, {{ic|/boot}} needs to reside on its own, unencrypted partition.<br />
<br />
{{Note| A swap partition is optional; it can be encrypted with dm-crypt/LUKS. See [[#Encrypting_the_Swap_partition|Encrypting the Swap Partition]] for details.}}<br />
<br />
=====Single Disk Systems=====<br />
<br />
Depending on the system demands, there may be additional partitions desired. These partitions can be individually created at this level by defining separate primary or extended/logical partitions. However, if LVM is to be used, the space unoccupied by {{ic|/boot}} and swap should be defined as single large partition which will be divided up later at the LVM level.<br />
<br />
=====Multiple Disk Systems=====<br />
<br />
In systems that will have multiple hard disk drives, the same options exist as a single disk system. After the creation of the {{ic|/boot}} and swap partitions, the remaining free space on physical disks can divided up into their respective partitions at this level, or large partitions can define all free space per physical disk with intent to partition them within the LVM.<br />
<br />
== Configuring LUKS ==<br />
<br />
Creating LUKS partitions with a passphrase is supported by the {{ic|/arch/setup}} program. <br />
<br />
This section of the Wiki will cover how to manually utilize LUKS from the command line to encrypt a system. <br />
<br />
The steps for accomplishing this through the graphical installer are very similar and can be located in the dialogue for manual configuration of the hard drive.<br />
<br />
=== Mapping Physical Partitions to LUKS ===<br />
<br />
Once the desired partitions are created it is time to format them as LUKS partitions and then mount them through the device mapper.<br />
<br />
When creating LUKS partitions they must be associated with a key. <br />
<br />
A key is either a: <br />
<br />
::*Passphrase<br />
::*Keyfile <br />
<br />
It is possible to define up to 8 different keys per LUKS partition.<br />
<br />
==== Using LUKS to Format Partitions with a Passphrase ====<br />
<br />
Cryptsetup is used to interface with LUKS for formatting, mounting and unmounting encrypted partitions.<br />
<br />
A full list of options {{ic|cryptsetup}} accepts can be found in the [[http://www.linuxcommand.org/man_pages/cryptsetup8.html Cryptsetup Manpage]]<br />
<br />
The options used here are:<br />
<br />
::*{{ic|-c}} defines the cipher type<br />
::*{{ic|-y}} prompts for password confirmation on password creation<br />
::*{{ic|-s}} defines the key size<br />
<br />
::luksFormat addresses the LUKS extensions built into cryptsetup.<br />
<br />
In the following examples for creating LUKS partitions, we will use the AES cipher in XTS mode, at present this is most generally used preferred cipher.<br />
Other ciphers can be used with cryptsetup, and details about them can be found here: [[Wikipedia:Block_cipher]]<br />
<br />
'''Formatting LUKS Partitions'''<br />
<br />
First of all make sure the device mapper kernel module is loaded by executing the following: {{ic|# modprobe dm_mod}}<br />
<br />
In order to format a desired partition as an encrypted LUKS partition execute:<br />
{{hc|# cryptsetup -c <cipher> -y -s <key size> luksFormat /dev/<partition name>|<br />
Enter passphrase: <password><br />
Verify passphrase: <password>}}<br />
<br />
This should be repeated for all partitions except for {{ic|/boot}} and possibly swap.<br />
<br />
The example below will create an encrypted root partition using the AES cipher in XTS mode (generally referred to as ''XTS-AES'').<br />
{{bc|cryptsetup -c aes-xts-plain -y -s 512 luksFormat /dev/sda2}}<br />
<br />
{{Note|If hibernation usage is planned, swap must be encrypted in this fashion; otherwise, if hibernation is not a planned feature for the system, encrypting the swap file will be performed in a alternative manner.}}<br />
<br />
{{Warning|Irrespective of the chosen partitioning method, the {{ic|/boot}} partition must remain separate and unencrypted in order to load the kernel and boot the system.}}<br />
<br />
'''Unlocking/Mapping LUKS Partitions with the Device Mapper'''<br />
<br />
Once the LUKS partitions have been created it is time to unlock them.<br />
<br />
The unlocking process will map the partitions to a new device name using the device mapper. This alerts the kernel that {{ic|/dev/<partition name>}} is actually an encrypted device and should be addressed through LUKS using the {{ic|/dev/mapper/<name>}} so as not to overwrite the encrypted data. <br />
<br />
In order to open an encrypted LUKS partition execute:<br />
{{hc|# cryptsetup luksOpen /dev/<partition name> <device-mapper name>|<br />
Enter any LUKS passphrase: <password><br />
key slot 0 unlocked.<br />
Command successful.}}<br />
<br />
Usually the device mapped name is descriptive of the function of the partition that is mapped, example:<br />
<br />
::*cryptsetup luksOpen /dev/sda2 '''swap'''<br />
::::Once opened, the swap partition device address would be '''{{ic|/dev/mapper/swap}}''' instead of {{ic|/dev/sda2}}.<br />
<br />
::*cryptsetup luksOpen /dev/sda3 '''root'''<br />
::::Once opened, the root partition device address would be '''{{ic|/dev/mapper/root}}''' instead of {{ic|/dev/sda3}}.<br />
<br />
{{Note|Since {{ic|/boot}} is not encrypted, it does not need a device mapped name and will be addressed as {{ic|/dev/sda1}}.}}<br />
<br />
{{Warning|In order to write encrypted data into the partition it must be accessed through the device mapped name.}}<br />
<br />
==== Using LUKS to Format Partitions with a Keyfile ====<br />
<br />
'''What is a Keyfile?'''<br />
<br />
A keyfiles is any file in which the data contained within is used as the passphrase to unlock an encrypted volume.<br />
Therefore if these files are lost or changed, decrypting the volume will no longer be possible.<br />
<br />
{{Tip|Define a passphrase in addition to the keyfile for backup access to encrypted volumes in the event the defined keyfile is lost or changed.}}<br />
<br />
'''Why use a Keyfile?'''<br />
<br />
There are many kinds of keyfiles, each type of keyfile used has benefits and disadvantages summarized below:<br />
<br />
:'''keyfile.passphrase:'''<br />
::this is my passphrase I would have typed during boot but I have placed it in a file instead<br />
<br />
This is a keyfile containing a simple passphrase. The benefit of this type of keyfile is that if the file is lost the data it contained is known and hopefully easily remembered by the owner of the encrypted volume. However the disadvantage is that this does not add any security over entering a passphrase during the initial system start.<br />
<br />
:'''keyfile.randomtext:'''<br />
::fjqweifj830149-57 819y4my1- 38t1934yt8-91m 34co3;t8y;9p3y-<br />
<br />
This is a keyfile containing a block of random characters. The benefit of this type of keyfile is that it is much more resistant to dictionary attacks than a simple passphrase. An additional strength of keyfiles can be utilized in this situation which is the length of data used. Since this is not a string meant to be memorized by a person for entry, it is trivial to create files containing thousands of random characters as the key. The disadvantage is that if this file is lost or changed, it will most likely not be possible to access the encrypted volume without a backup passphrase.<br />
<br />
:'''keyfile.binary:'''<br />
::where any binary file, images, text, video could be chosen as the keyfile<br />
<br />
This is a binary file that has been defined as a keyfile. When identifying files as candidates for a keyfile, it is recommended to choose files that are relatively static such as photos, music, video clips. The benefit of these files is that they serve a dual function which can make them harder to identify as keyfiles. Instead of having a text file with a large amount of random text, the keyfile would like a regular image file, or music clip to the casual observer. The disadvantage is that if this file is lost or changed, it will most likely not be possible to access the encrypted volume without a backup passphrase. Additionally, there is a theoretical loss of randomness when compared to a randomly generated text file. This is due to the fact that images, videos, music have some intrinsic relationship between neighboring bits of data that is not existent for a text file. However this is controversial and has never been exploited publicly.<br />
<br />
'''Creating a Keyfile with Random Characters'''<br />
<br />
Here {{ic|dd}} is used to generate a keyfile of 2048 bits of random characters.<br />
<br />
# dd if=/dev/urandom of=mykeyfile bs=512 count=4<br />
<br />
The usage of {{ic|dd}} is similar to initially wiping the volume with random data prior to encryption. While [[badblocks]] may also be used, most key files are on the order of a few kilobytes and there is no noticable speed difference between dd, or badblocks.<br />
<br />
'''Creating a new LUKS encrypted partition with a Keyfile'''<br />
<br />
When creating a new LUKS encrypted partition, a keyfile may be associated with the partition on its creation using:<br />
<br />
# cryptsetup -c <desired cipher> -s <key size> -v luksFormat /dev/<volume to encrypt> '''/path/to/mykeyfile'''<br />
<br />
This is accomplished by appending the bold area to the standard cryptsetup command which defines where the keyfile is located.<br />
<br />
==== Adding Additional Passphrases or Keyfiles to a LUKS Encrypted Partition ====<br />
<br />
LUKS supports the association of up to 8 keys with any single encrypted volume.<br />
Keys can be either keyfiles or passphrases.<br />
<br />
Once an encrytped partition has been created, the initial key is associated at slot0.<br />
Additional keys will occupy slots 1 - 7.<br />
<br />
The addition of new keys to an encrypted partition is accomplished using cryptsetup with the {{ic|luksAddKey}} extension.<br />
<br />
# cryptsetup luksAddKey /dev/<encrypted volume> '''/path/to/mykeyfile'''<br />
<br />
Where {{ic|/dev/<encrypted volume>}} is the volume that is to have the new key associated with it.<br />
<br />
If the bolded area is present, cryptsetup will look for the keyfile defined at that location to associate with the encrypted volume specified.<br />
<br />
=== Storing the Key File ===<br />
<br />
==== External Storage on a USB Drive ====<br />
<br />
===== Preparation for permanent device names =====<br />
For reading the file from an USB stick it is important to access it through a permanent device name.<br />
The numbering of the normal device names e.g. {{ic|/dev/sdb1}} is somewhat arbitrary and depends on how many storage devices are attached and in what order, etc.<br />
So in order to assure that the {{ic|encrypt}} HOOK in the initcpio finds your keyfile, you must use a permanent device name. <br />
<br />
===== Quick method =====<br />
A quick method (as opposed to setting up a [[udev]] rule) for doing so involves referencing your removable device by its label (or UUID). To find your label or UUID, plug in your USB drive and run the following:<br />
<br />
{{hc|# ls -l /dev/disk/by-label/|<br />
lrwxrwxrwx 1 root root 10 12. Feb 10:11 Keys -> ../../sdb1}}<br />
<br />
or<br />
<br />
{{hc|# ls -l /dev/disk/by-uuid/|<br />
lrwxrwxrwx 1 root root 10 12. Feb 10:11 4803-8A7B -> ../../sdb1}}<br />
<br />
In this case, I labeled the vfat partition on my USB drive as "Keys" so my device is always symlinked in {{ic|/dev/disk/by-label/Keys}}, or if I had wanted to use the UUID I would find {{ic|/dev/disk/by-uuid/4803-8A7B}}. This allows me to have a consistent naming of my USB devices regardless of the order they are plugged into the system. These device names can be used in the "cryptkey" kernel option or any where else. Filesystem UUIDs are stored in the filesystem itself, meaning that the UUID will be the same if you plug it into any other computer, and that a dd backup of it will always have the same UUID since dd does a bitwise copy.<br />
<br />
{{Note|If you plan to store the keyfile between [[#Storing_the_key_between_MBR_and_1st_partition|MBR and the 1st partition]] you '''cannot use this method''', since it only allows access to the partitions ({{ic|sdb1}}, {{ic|sdb2}}, ...) but not to the USB device ({{ic|sdb}}) itself.<br />
Create a udev rule instead as described in the following section.}}<br />
<br />
==== Using udev ====<br />
Optionally you may choose to set up your flash drive with a [[udev]] rule. There is some documentation in the Arch wiki about that already; if you want more in-depth, structural info, read [http://reactivated.net/writing_udev_rules.html this guide]. Here is quickly how it goes.<br />
<br />
Get the serial number from your USB flash drive:<br />
lsusb -v | grep -A 5 Vendor<br />
<br />
Create a udev rule for it by adding the following to a file in {{ic|/etc/udev/rules.d/}}, such as {{ic|8-usbstick.rules}}:<br />
KERNEL=="sd*", ATTRS{serial}=="$SERIAL", SYMLINK+="$SYMLINK%n"<br />
<br />
Replace {{ic|$SYMLINK}} and {{ic|$SERIAL}} with their respective values. {{ic|%n}} will expand to the partition (just like sda is subdivided into sda1, sda2, ...). You do not need to go with the 'serial' attribute. If you have a custom rule of your own, you can put it in as well (e.g. using the vendor name).<br />
<br />
Rescan your sysfs:<br />
udevadm trigger<br />
Now check the contents of {{ic|/dev}}:<br />
ls /dev<br />
It should show your device with your desired name.<br />
<br />
==== Generating the keyfile ====<br />
Optionally you can mount a tmpfs for storing the temporary keyfile.<br />
# mkdir ./mytmpfs<br />
# mount tmpfs ./mytmpfs -t tmpfs -o size=32m<br />
# cd ./mytmpfs<br />
The advantage is that it resides in RAM and not on a physical disk, so after unmounting your keyfile is securly gone.<br />
So copy your keyfile to some place you consider as secure before unmounting.<br />
If you are planning to store the keyfile as a plain file on your USB device, you can also simply execute the following command in the corresponding directory, e.g. {{ic|/media/sdb1}}<br />
<br />
The keyfile can be of arbitrary content and size. We will generate a random temporary keyfile of 2048 bytes:<br />
# dd if=/dev/urandom of=secretkey bs=512 count=4<br />
<br />
If you stored your temporary keyfile on a physical storage, remember to not just (re)move the keyfile later on, but use something like<br />
cp secretkey /destination/path<br />
shred --remove --zero secretkey<br />
to securely overwrite it. (However due to journaling filesystems this is also not 100% secure.)<br />
<br />
Add the temporary keyfile with cryptsetup:<br />
# cryptsetup luksAddKey /dev/sda2 secretkey<br />
Enter any LUKS passphrase:<br />
key slot 0 unlocked.<br />
Command successful.<br />
<br />
==== Storing the keyfile ====<br />
To store the key file, you have two options. The first is less risky than the other, but perhaps a bit more secure (if you consider security by obscurity as more secure).<br />
In any case you have to do some further configuration, if not already done above.<br />
<br />
==== Configuration of initcpio ====<br />
You have to add two extra modules in your {{ic|/etc/mkinitcpio.conf}}, one for the drive's file system and one for the codepage. Further if you created a udev rule, you should tell {{ic|mkinitcpio}} about it:<br />
MODULES="ata_generic ata_piix nls_cp437 vfat"<br />
FILES="/etc/udev/rules.d/8-usbstick.rules"<br />
In this example it is assumed that you use a FAT formatted USB drive. Replace those module names if you use another file system on your USB stick (e.g. ext2) or another codepage. Users running the stock Arch kernel should stick to the codepage mentioned here.<br />
<br />
Additionally, insert the {{ic|usb}} hook somewhere before the {{ic|encrypt}} hook.<br />
HOOKS="... '''usb''' encrypt ... filesystems ..."<br />
<br />
Generate a new image (maybe you should take a copy of your old kernel26.img before):<br />
mkinitcpio -g /boot/kernel26.img<br />
<br />
==== Storing the key as plain (visible) file ====<br />
Be sure to choose a plain name for your key - a bit of 'security through obscurity' is always nice ;-). Avoid using dots (hidden files) and similar characters - the {{ic|encrypt}} hook will fail to find the keyfile during the boot process.<br />
<br />
You have to add a kernel parameter in your {{ic|/boot/grub/menu.lst}} ([[GRUB]]), it should look something like this:<br />
kernel /vmlinuz26 root=/dev/hda3 ro vga=791 cryptkey=/dev/usbstick:vfat:/secretkey<br />
This assumes {{ic|/dev/usbstick}} is the FAT partition of your choice. Replace it with {{ic|/dev/disk/by-...}} or whatever your device is.<br />
<br />
That is all, reboot and have fun!<br />
<br />
==== Storing the key between MBR and 1st partition ====<br />
We will write the key directly between the Master Boot Record (MBR) and the first partition.<br />
<br />
{{Warning|You should only follow this step if you know what you are doing -- '''it can cause data loss and damage your partitions or MBR on the stick!'''}}<br />
<br />
If you have a bootloader installed on your drive you have to adjust the values. E.g. [[GRUB]] needs the first 16 sectors (actually, it depends on the type of the file system, so do not rely on this too much), you would have to replace {{ic|seek<nowiki>=</nowiki>4}} with {{ic|seek<nowiki>=</nowiki>16}}; otherwise you would overwrite parts of your GRUB installation. When in doubt, take a look at the first 64 sectors of your drive and decide on your own where to place your key. <br />
<br />
''Optional''<br />
If you do not know if you have enough free space before the first partition, you can do<br />
dd if=/dev/usbstick of=64sectors bs=512 count=64 # gives you copy of your first 64 sectors<br />
hexcurse 64sectors # determine free space<br />
xxd 64sectors | less # alternative hex viewer<br />
<br />
Write your key to the disk:<br />
dd if=secretkey of=/dev/usbstick bs=512 seek=4<br />
<br />
If everything went fine you can now overwrite and delete your temporary secretkey as noted above.<br />
You should not simply use {{ic|rm}} as the keyfile would only be unlinked from your filesystem and be left physically intact.<br />
<br />
Now you have to add a kernel parameter in your {{ic|/boot/grub/menu.lst}} file (GRUB); it should look something like this:<br />
kernel /vmlinuz26 root=/dev/hda3 ro vga=791 cryptkey=/dev/usbstick:2048:2048<br />
Format for the {{ic|cryptkey}} option:<br />
cryptkey=BLOCKDEVICE:OFFSET:SIZE<br />
{{ic|OFFSET}} and {{ic|SIZE}} match in this example, but this is just coincidence - they can differ (and often will). An other possible example could be<br />
kernel /vmlinuz26 root=/dev/hda3 ro vga=791 cryptkey=/dev/usbstick:8192:2048<br />
That is all, reboot and have fun! And look if your partitions still work after that ;-).<br />
<br />
=== Encrypting the Swap partition ===<br />
<br />
==== Encrypting Swap without Suspend Support ====<br />
<br />
In systems where suspend to disk is not a desired feature, it is possible to create a swap file that will have a random passphrase with each boot.<br />
<br />
This is accomplished by using dm-crypt directly without LUKS extensions.<br />
<br />
Execute the following command to setup a randomly encrypted swap partition:<br />
<br />
# echo <device-mapper name> <swap physical partition> SWAP "-c aes-xts-plain -h whirlpool -s 512" >> /mnt/etc/crypttab<br />
<br />
This command adds the following swap partition details to {{ic|/mnt/etc/crypttab}}:<br />
<br />
::*'echo' and '>> /mnt/etc/crypttab' adds the command to the file {{ic|/mnt/etc/crypttab}} directly<br />
::*SWAP identifies the partition as a swap partition<br />
::*{{ic|-c}} defines a cipher<br />
::*{{ic|-h}} defines a hash algorithm<br />
::*{{ic|-s}} defines the key size<br />
<br />
Example ({{ic|/dev/sda2}} is the physical swap partition and {{ic|/dev/mapper/swapmapper}} is the device-mapper):<br />
<br />
::*echo swapmapper /dev/sda2 SWAP "-c aes-xts-plain -h whirlpool -s 512" >> /mnt/etc/crypttab<br />
:::Maps {{ic|/dev/sda2}} to {{ic|/dev/mapper/swapmapper}} as a swap partition which is encrypted by AES with Whirlpool as the hash algorithm.<br />
<br />
There are many hash algorithms that can be employed. For further details, read [[Wikipedia:Cryptographic_hash_function]]. <br />
<br />
{{Tip|Many people prefer Whirlpool as it is patent free. On modern hardware there is minimal performance difference between algorithms.}}<br />
<br />
If the partition chosen for swap was previously a LUKS partition, crypttab will not overwite to partition to create a swap partition. This is safetly measure to prevent data loss from accidental miss identification of the swap partition in crypttab. In order to use such a partition the LUKS header must be removed. This can be accomplished by<br />
<br />
# dd if=/dev/zero of=/dev/sdaX # where X is your swap partition number<br />
<br />
==== Using UUIDs with encrypted swap partitions ====<br />
If there are multiple hard drives installed in the system, their naming order (sda, sdb,...) can occasionally be scrambled upon boot. When {{ic|/etc/rc.sysinit}} parses the {{ic|/etc/crypttab}} file and sees the SWAP line, it will create a new dm-crypt mapping backed by that device partition and initialize encrypted swap space on top of it. This operation destroys all data on the partition, which can be catastrophic if the disk names have been switched upon reboot. To prevent such mistakes on multi-drive systems, always reference disk partitions using UUIDs rather than device names. {{ic|/etc/rc.sysinit}} will refuse to overwrite any known file system, partition table, RAID/LVM volume or valid LUKS partition.<br />
<br />
Create a regular swap partition with a new UUID:<br />
# mkswap /dev/sdaX # where X is your swap partition number <br />
Note the new random UUID and edit {{ic|/etc/crypttab}}<br />
swap /dev/disk/by-uuid/<your UUID> SWAP --offset 8 -c aes-xts-plain -h whirlpool -s 512<br />
The {{ic|--offset}} parameter will prevent the UUID (stored within the first eight 512 byte blocks) from being overwritten by cryptsetup each time new encrypted swap space is initialized. <br />
<br />
Edit your {{ic|/etc/rc.sysinit}}, find the following lines<br />
{{bc|<nowiki><br />
local _overwriteokay=0<br />
if [[ -b $2 && -r $2 ]]; then<br />
# This is DANGEROUS! If there is any known file system,<br />
# partition table, RAID or LVM volume on the device<br />
# we don't overwrite it.<br />
#<br />
# 'blkid' returns 2 if no valid signature has been found.<br />
# Only in this case we should allow overwriting the device.<br />
#<br />
# This sanity check _should_ be sufficient, but it might not.<br />
# This may cause dataloss if it is not used carefully.<br />
blkid -p "$2" &>/dev/null<br />
(( $? == 2 )) && _overwriteokay=1<br />
fi<br />
<br />
</nowiki>}}<br />
and replace it with<br />
{{bc|<nowiki><br />
if [[ -b $2 && -r $2 ]]; then<br />
# This is DANGEROUS! If there is any known file system,<br />
# partition table, RAID or LVM volume on the device<br />
# we don't overwrite it.<br />
#<br />
# 'blkid' returns 2 if no valid signature has been found.<br />
# Only in this case we should allow overwriting the device.<br />
#<br />
# This sanity check _should_ be sufficient, but it might not.<br />
# This may cause dataloss if it is not used carefully.<br />
blkid -p "$2" &>/dev/null<br />
(( $? == 2 )) && _overwriteokay=1<br />
<br />
#Allow overwrite if $2 has TYPE swap(useful for LUKS swap partition using UUID)<br />
( blkid -p -s TYPE "$2" 2> /dev/null | grep -q swap) && _overwriteokay=1<br />
fi<br />
<br />
</nowiki>}}<br />
<br />
You can now use {{ic|/dev/mapper/swap}} as swap device in {{ic|/etc/fstab}}.<br />
<br />
An additional advantage of this method is that the swap partition can be shared among several operating systems, in encrypted and unencrypted forms.<br />
<br />
==== Encrypted swap with suspend-to-disk support ====<br />
{{Warning|Do not use this setup with a key file, please read about the issue reported [[Talk:System_Encryption_with_LUKS_for_dm-crypt#Suspend_to_disk_instructions_are_insecure|here]]}}<br />
<br />
To be able to resume after suspending the computer to disk (hibernate), it is required to keep the swap filesystem intact. Therefore, it is required to have a presistent LUKS swap partition, which can be stored on the disk or input manually at startup. Because the resume takes place before {{ic|/etc/crypttab}} can be used, it is required to create a hook in {{ic|/etc/mkinitcpio.conf}} to open the swap LUKS device before resuming. The following setup has the disadvantage of having to insert a key manually for the swap partition.<br />
<br />
If you want to use a partition which is currently used by the system, you have to disable it, first:<br />
# swapoff /dev/<device><br />
To create the swap partition, follow steps similar to those described in [[#Mapping_partitions | mapping partitions]] above.<br><br />
* Format the partition you want to use as swap with the {{ic|cryptsetup}} command. For performance reasons, you might want to use different ciphers with different key sizes. A benchmark can be found [http://www.saout.de/tikiwiki/tiki-index.php?page=UserPageChonhulio here]{{Linkrot|2011|09|05}}.<br />
<br />
# cryptsetup -c aes-xts-plain -s 512 -h sha512 -v luksFormat /dev/<device><br />
<br />
Check result with:<br />
<br />
# cryptsetup luksDump /dev/<device><br />
<br />
* Open the partition in {{ic|/dev/mapper}}:<br />
<br />
# cryptsetup luksOpen /dev/<device> swapDevice<br />
<br />
* Create a swap filesystem inside the mapped partition:<br />
<br />
# mkswap /dev/mapper/swapDevice<br />
<br />
Now you should have a LUKS swap partition which asks for the passphrase before mounting. Make sure you remove any line in {{ic|/etc/crypttab}} which uses this device. Now you have to create a hook to open the swap at boot time.<br />
<br />
* Create a hook file containing the open command:<br />
<br />
{{hc|/lib/initcpio/hooks/openswap|<nowiki><br />
# vim: set ft=sh:<br />
run_hook ()<br />
{<br />
cryptsetup luksOpen /dev/<device> swapDevice<br />
}<br />
</nowiki>}}<br />
<br />
* Then create and edit the hook setup file:<br />
{{hc|/lib/initcpio/install/openswap|<nowiki><br />
# vim: set ft=sh:<br />
build ()<br />
{<br />
MODULES=""<br />
BINARIES=""<br />
FILES=""<br />
SCRIPT="openswap"<br />
}<br />
help ()<br />
{<br />
cat<<HELPEOF<br />
This opens the swap encrypted partition /dev/<device> in /dev/mapper/swapDevice<br />
HELPEOF<br />
}<br />
</nowiki>}}<br />
<br />
* Add the hook {{ic|openswap}} in the {{ic|HOOKS}} array in {{ic|/etc/mkinitcpio.conf}}, before {{ic|filesystem}}, but '''after''' {{ic|encrypt}} which is mandatory as well. Do not forget to add the {{ic|resume}} hook between {{ic|openswap}} and {{ic|filesystem}} as well.<br />
<br />
* Regenerate the boot image:<br />
<br />
# mkinitcpio -p linux<br />
<br />
* Add the mapped partition to {{ic|/etc/fstab}} by adding the following line:<br />
/dev/mapper/swapDevice swap swap defaults 0 0<br />
<br />
* Set-up your system to resume from {{ic|/dev/mapper/swapDevice}}. For example, if you use [[GRUB]] with kernel hibernation support, add {{ic|resume<nowiki>=</nowiki>/dev/mapper/swapDevice}} to the kernel line in {{ic|/boot/grub/menu.lst}}. A line with encrypted root and swap partitions can look like this:<br />
<br />
kernel /vmlinuz26 cryptdevice=/dev/sda2:rootDevice root=/dev/mapper/rootDevice resume=/dev/mapper/swapDevice ro<br />
<br />
At boot time, the {{ic|openswap}} hook will open the swap partition so the kernel resume may use it. If you use special hooks for resuming from hibernation, make sure they are placed '''after''' {{ic|openswap}} in the {{ic|HOOKS}} array. Please note that because of initrd opening swap, there is no entry for swapDevice in {{ic|/etc/crypttab}} needed in this case.<br />
<br />
== Installing the system ==<br />
Now that {{ic|/dev/mapper/root}} and {{ic|/dev/mapper/home}} are in place, we can enter the regular Arch setup script to install the system into the encrypted volumes.<br />
# /arch/setup<br />
{{Note | Most of the installation can be carried out normally. However, there are a few areas where it is important to make certain selections these are marked below.}}<br />
<br />
==== Prepare hard drive ====<br />
Skip the Partitioning and Auto-Prepare business and go straight to manually configuration.<br />
Instead of choosing the hardware devices ({{ic|/dev/sdaX}}) directly, you have to select the mapper devices created above:<br />
Choose {{ic|/dev/mapper/root}} for your root and {{ic|/dev/mapper/home}} as {{ic|/home}} partition respectively and format them with any filesystem you like.<br />
The same is valid for a swap partition which is set up like the {{ic|/home}} partition. Make sure you mount {{ic|/dev/sda1}} as the {{ic|/boot}} partition or else the installer will not properly set up the bootloader.<br />
<br />
=== Select and Install packages ===<br />
Select and install the packages as usual, the base package contains all required programs.<br />
<br />
=== Configure System ===<br />
{{Note|The {{ic|encrypt}} hook is only needed if your root partition is a ''LUKS'' partition (or for a LUKS partition that needs to be mounted ''before'' root). The {{ic|encrypt}} hook is not needed in case any other partition (swap, for example) is encrypted. System initialization scripts ({{ic|/etc/rc.sysinit}} and {{ic|/etc/crypttab}} among others) take care of those.<br />
<br />
Afterwards you can check the files presented to you by the installer, the most important one being {{ic|/etc/mkinitcpio.conf}}. For detailed info on mkinitcpio (and its configuration) refer to [[Mkinitcpio]]. You have to make sure that your {{ic|HOOKS}} array in {{ic|/etc/mkinitcpio.conf}} looks something like this:<br />
HOOKS="... encrypt ... filesystems ..."<br />
It is important that the {{ic|encrypt}} hook comes ''before'' the {{ic|filesystems}} one. If you store your key on an external USB device (e.g. a USB stick), you need to add the USB hook too:<br />
HOOKS="... usb encrypt ... filesystems ..."<br />
For safety, add in {{ic|usb}} before {{ic|encrypt}} because the hooks are run in the order they appear.<br />
If you need support for foreign keymaps for your encryption password, you have to specify the hook {{ic|keymap}} as well. I suggest to put this in {{ic|/etc/mkinitcpio.conf}} right before {{ic|encrypt}}.<br />
<br />
If you have a USB keyboard, you need the {{ic|usbinput}} hook in {{ic|/etc/mkinitcpio.conf}}. Without it, no USB keyboard will work in early userspace.<br />
<br />
If your root partition is a ''LUKS'' partition, add the used filesystem to the {{ic|MODULES}} section.<br />
MODULES="... ext3 ext4 xfs ..."<br />
<br />
=== Install Bootloader ===<br />
'''[[GRUB]]:''' You have to make some small changes to the entries generated by the installer by replacing {{ic|/dev/mapper/root}} with {{ic|/dev/sda3}}. The corrected config looks like this:<br />
# (0) Arch Linux<br />
title Arch Linux<br />
root (hd0,0)<br />
kernel /vmlinuz26 root=/dev/sda3 ro<br />
initrd /kernel26.img<br />
<br />
For kernel >= 2.6.38:<br />
# (0) Arch Linux<br />
title Arch Linux<br />
root (hd0,0)<br />
kernel /vmlinuz-linux cryptdevice=/dev/sda3:root root=/dev/mapper/root ro<br />
initrd /initramfs-linux.img<br />
<br />
'''LILO:''' On Lilo, edit the Arch Linux section on {{ic|/etc/lilo.conf}} and include a line for the {{ic|append}} option, over the initrd, with the {{ic|root<nowiki>=</nowiki>/dev/sda3}} parameter. The {{ic|append}} section make the same kernel line on GRUB. Also, you can omit the {{ic|root}} option, over the {{ic|image}} option. The section look like this:<br />
# Arch Linux lilo section<br />
image = /vmlinuz26<br />
# root = /dev/sda3<br />
label = Arch<br />
initrd = /kernel26.img<br />
append = "root=/dev/sda3"<br />
read-only<br />
<br />
{{Note|If you want to use a USB flash drive with a keyfile, you have to append the {{ic|cryptkey}} option. See the corresponding section below.}}<br />
<br />
=== Exit Install ===<br />
Now that the install is finished the only thing left to do is add entries to the {{ic|/etc/crypttab}} file so you do not have to enter the passphrase for all encrypted partitions. This works only for non-root partitions e.g. /home, swap, etc.<br />
# vi /etc/crypttab<br />
Add the following line for the {{ic|/home}} partition<br />
home /dev/sda5 "myotherpassword"<br />
<br />
You can also use a keyfile instead of a passphrase. If not already done, create a keyfile and add the key to the corresponding LUKS partition as described [[#Keyfile|above]].<br />
Then add the following information to the {{ic|/etc/crypttab}} file for automounting:<br />
home /dev/sda5 /path/of/your/keyfile<br />
<br />
After rebooting you should now be presented with the text<br />
A password is required to access the root filesystem:<br />
followed by a prompt for any LUKS password. Type it in and everything should boot.<br />
Once you've logged in, have a look at your mounted partitions by typing {{ic|mount}}. You should have {{ic|/dev/mapper/root}} mounted at {{ic|/}} and, if you set up a separate encrypted home partition, {{ic|/dev/mapper/home}} mounted at {{ic|/home}}. If you set up encrypted swap, {{ic|swapon -s}} should have {{ic|/dev/mapper/swap}} listed as your swap partition.<br />
<br />
{{Note | eventually the text prompting for the password is mixed up with other boot messages. So the boot process may seem frozen at first glance, but it isn't, simply enter your password and press return.}}<br />
<br />
== Remote unlocking of the root (or other) partition ==<br />
If you want to be able to reboot a fully LUKS encrypted system remotely or start it with a Wake-on-LAN service you will need a way to enter a passphrase for the root partition/volume at startup. This can be achived by running the {{ic|net}} hook along with an [[SSH]] server in initrd. Install the {{AUR|dropbear_initrd_encrypt}} package from the [[Arch User Repository|AUR]] and follow the post-installation instructions. Replace the {{ic|encrypt}} hook with {{ic|encryptssh}} in {{ic|/etc/mkinitcpio.conf}}. Put the {{ic|net}} hook early in the HOOKS array if your DHCP server takes a long time to lease IP addresses.<br />
<br />
If you simply would like a nice solution to mount other encrypted partitions (like {{ic|/home}}) remotely, you may want to look at the [https://bbs.archlinux.org/viewtopic.php?pid=880484 this forum thread].<br />
<br />
== Backup the cryptheader ==<br />
If the header of your crypted partition gets destroyed, you will not be able to decrypt your data. Therefore, having a backup of the headers and storing them on another disk might be a good idea.<br />
<br />
'''Attention:''' Many people recommend NOT to backup the cryptheader, even so it's a single point failure!<br />
In short, the problem is, that LUKS isn't aware of the duplicated cryptheader, which contains the masterkey which is used to encrypt all files on your partition. Of course this masterkey is encrypted with your passphrases or keyfiles.<br />
But if one of those gets compromised and you want to revoke it you have to do this on all copies of the cryptheader!<br />
I.e. if someone has got your cryptheader and one of your keys he can decrypt the masterkey and access all your data.<br />
Of course the same is true for all backups you create of your partions.<br />
So you decide if you are one of those paranoids brave enough to go without a backup for the sake of security or not.<br />
See also [http://www.saout.de/tikiwiki/tiki-slideshow.php?page=LUKSFaq&slide=1|LUKSFaq]{{Linkrot|2011|09|05}} for further details on this.<br />
<br />
'''Note:''' you can also backup the header into a tmpfs/ramfs and encrypt it with gpg or whatever before writing it to a physical disk. Of course you can wrap your encrypted backup into another encryption layer and so on until you feel safe enough :-)<br />
<br />
=== Backup ===<br />
==== Manually ====<br />
First you have to find out the payload offset of the crypted partition (replace sdaX with the corresponding partition)<br />
cryptsetup luksDump /dev/sdaX | grep "Payload offset"<br />
Payload offset: 4040<br />
Now that you know the value, you can backup the header with a simple dd command<br />
dd if=/dev/sdaX of=./backup.img bs=512 count=4040<br />
<br />
==== Using cryptsetup ====<br />
You can also use the luksHeaderBackup command instead:<br />
cryptsetup luksHeaderBackup /dev/sdaX --header-backup-file ./backup.img<br />
<br />
=== Restore ===<br />
Be careful before restore: make sure that you chose the right partition (again replace sdaX with the corresponding partition).<br />
Restoring the wrong header or restoring to an unencrypted partition will cause data loss.<br />
==== Manually ====<br />
Again, you will need to the same values as when backuping:<br />
dd if=./backup.img of=/dev/sdX bs=512 count=4040<br />
==== Using cryptsetup ====<br />
Or you can use the luksHeaderRestore command:<br />
cryptsetup luksHeaderRestore /dev/sdaX --header-backup-file ./backup.img<br />
<br />
'''Note:''' All the keyslot areas are overwritten, only active keyslots from backup file are available after issuing this command.<br />
<br />
== Encrypting a loopback filesystem ==<br />
''[This paragraph has been merged from another page; its consistency with the other paragraphs should be improved]''<br />
<br />
=== Preparation and mapping ===<br />
First, start start by creating an encrypted container!<br />
<br />
dd if=/dev/urandom of=/bigsecret bs=1M count=10<br />
<br />
This will create the file {{ic|bigsecret}} with a size of 10 megabytes.<br />
<br />
losetup /dev/loop0 /bigsecret<br />
<br />
This will create the device node {{ic|/dev/loop0}}, so that we can mount/use our container.<br />
<br />
{{Note|If it gives you the error {{ic|/dev/loop0: No such file or directory}}, you need to first load the kernel module with {{ic|modprobe loop}}.}}<br />
<br />
cryptsetup luksFormat /dev/loop0<br />
<br />
This will ask you for a password for your new container file.<br />
<br />
{{Note|If you get an error like {{ic|Command failed: Failed to setup dm-crypt key mapping. Check kernel for support for the aes-cbc-essiv:sha256 cipher spec and verify that /dev/loop0 contains at least 133 sectors|}}, then run {{ic|modprobe dm-mod}}.}}<br />
<br />
cryptsetup luksOpen /dev/loop0 secret<br />
<br />
The encrypted container is now available through the device file {{ic|/dev/mapper/secret}}.<br />
Now we are able to create a partition in the container:<br />
<br />
mkfs.ext2 /dev/mapper/secret<br />
<br />
and mount it...<br />
<br />
mkdir /mnt/secret<br />
mount -t ext2 /dev/mapper/secret /mnt/secret<br />
<br />
We can now use the container as if it was a normal partition!<br />
To unmount the container:<br />
<br />
umount /mnt/secret<br />
cryptsetup luksClose secret<br />
losetup -d /dev/loop0 # free the loopdevice.<br />
<br />
so, if you want to mount the container again, you just apply the following commands:<br />
<br />
losetup /dev/loop0 /bigsecret<br />
cryptsetup luksOpen /dev/loop0 secret<br />
mount -t ext2 /dev/mapper/secret /mnt/secret<br />
<br />
=== Encrypt using a key-file ===<br />
Let us first generate a 2048 byte random keyfile:<br />
<br />
dd if=/dev/urandom of=keyfile bs=1k count=2<br />
<br />
We can now format our container using this key<br />
<br />
cryptsetup luksFormat /dev/loop0 keyfile<br />
<br />
or our partition : <br />
<br />
cryptsetup luksFormat /dev/hda2 keyfile<br />
<br />
Once formatted, we can now open the LUKS device using the key:<br />
<br />
cryptsetup -d keyfile luksOpen /dev/loop0 container<br />
<br />
You can now like before format the device {{ic|/dev/mapper/container}} with your favorite filesystem and then mount it just as easily.<br />
<br />
The keyfile is now the only key to your file. I personally advise to encrypt your keyfile using your private GPG key and storing an off-site secured copy of the file.<br />
<br />
=== Resizing the loopback filesystem ===<br />
First we should unmount the encrypted container:<br />
umount /mnt/secret<br />
cryptsetup luksClose secret<br />
losetup -d /dev/loop0 # free the loopdevice.<br />
<br />
After this we need to create a second file with the size of the data we want to add:<br />
dd if=/dev/urandom of=zeros bs=1M count=1024<br />
<br />
You could use {{ic|/dev/zero}} instead of {{ic|/dev/urandom}} to significantly speed up the process, but {{ic|/dev/zero}} your encrypted filesystems will ''not be as secure''.<br />
<br />
Next we need to add the created file to our container. Be careful to really use TWO {{ic|>}}, or you will override your current container!<br />
cat zeros >> /bigsecret<br />
Now we have to map the container to the loopdevice:<br />
losetup /dev/loop0 /bigsecret<br />
cryptsetup luksOpen /dev/loop0 secret<br />
After this we will resize the encrypted part of the container to the maximum size of the container file:<br />
cryptsetup resize secret<br />
Finally, we can resize the filesystem. Here is an example for ext2/3/4:<br />
e2fsck -f /dev/mapper/secret # Just doing a filesystem check, because it's a bad idea to resize a broken fs<br />
resize2fs /dev/mapper/secret<br />
You can now mount your container again:<br />
mount /dev/mapper/secret /mnt/secret<br />
<br />
== Encrypting a LVM setup ==<br />
It's really easy to use encryption with [[LVM]]. If you do not know how to set up LVM, then read [[Installing_with_Software_RAID_or_LVM]].<br />
<br />
The easiest and best method is to set up LVM on top of the encrypted partition instead of the other way around. This link here is easy to follow and explains everything: [http://www.pindarsign.de/webblog/?p=767 Arch Linux: LVM on top of an encrypted partition]<br />
<br />
The most important thing in setting LVM on '''top''' of encryption is that you need to have the {{ic|encrypt}} hook '''before''' the {{ic|lvm2}} hook (and those two before the {{ic|filesystems}} hook, but that's repeating) ''because they are processed in order''.<br />
<br />
To use encryption on top of LVM, you have to first set up your LVM volumes and then use them as the base for the encrypted partitions. That means in short that you have to set up LVM first. Then follow this guide, but replace all occurrences of {{ic|/dev/sdXy}} in the guide with its LVM counterpart. (eg: {{ic|/dev/sda5}} -> {{ic|/dev/<volume group name>/home}}).<br />
<br />
Do not forget to add the {{ic|encrypt}} hook in {{ic|/etc/mkinitcpio.conf}} '''before''' the {{ic|lvm2}} hook, if you chose to set up encrypted partitions on '''top''' of LVM. Also remember to change {{ic|USELVM}} in {{ic|/etc/rc.conf}} to {{ic|"yes"}}.<br />
<br />
=== LVM with Arch Linux Installer (>2009.08) ===<br />
<br />
Since Arch Linux images 2009.08, LVM and dm_crypt is supported by the installer out of the box.<br />
This makes it very easy to configure your system for [[LVM]] on dm-crypt or vice versa.<br />
Actually the configuration is done exactly as without LVM, see the [[#Arch Linux Installer (>2009.08)|corresponding]] section above. It differs only in two aspects.<br />
<br />
==== The partition and filesystem choice ====<br />
Create a small, unencrypted boot partition and use the remaining space for a single partition which can later be split up into multiple logic volumes by [[LVM]].<br />
<br />
For a LVM-on-dm-crypt system set up the filesystems and mounting points for example like this:<br />
/dev/sda1 raw->ext2;yes;/boot;no_opts;no_label;no_params<br />
/dev/sda2 raw->dm_crypt;yes;no_mountpoint;no_opts;sda2crypt;-c_aes-xts-plain_-y_-s_512<br />
/dev/mapper/sda2crypt dm_crypt->lvm-vg;yes;no_mountpoint;no_opts;no_label;no_params<br />
/dev/mapper/sda2crypt+ lvm-pv->lvm-vg;yes;no_mountpoint;no_opts;cryptpool;no_params<br />
/dev/mapper/cryptpool lvm-vg(cryptpool)->lvm-lv;yes;no_mountpoint;no_opts;cryptroot;10000M|lvm-lv;yes;no_mountpoint;no_opts;crypthome;20000M<br />
/dev/mapper/cryptpool-cryptroot lvm-lv(cryptroot)->ext3;yes;/;no_opts;cryptroot;no_params<br />
/dev/mapper/cryptpool-crypthome lvm-lv(crypthome)->ext3;yes;/home;no_opts;cryptroot;no_params<br />
<br />
==== The configuration stage ====<br />
<br />
* In {{ic|/etc/rc.conf}} set {{ic|USELVM}} to {{ic|"yes"}}<br />
* In {{ic|/etc/mkinitcpio.conf}} add the {{ic|encrypt}} hook '''before''' the {{ic|lvm2}} hook in the {{ic|HOOKS}} array, if you set up LVM on top of the encrypted partition.<br />
<br />
That is it for the LVM & dm_crypt specific part. The rest is done as usual.<br />
<br />
=== Applying this to a non-root partition ===<br />
You might get tempted to apply all this fancy stuff to a non-root partition. Arch does not support this out of the box, however, you can easily change the cryptdev and cryptname values in {{ic|/lib/initcpio/hooks/encrypt}} (the first one to your {{ic|/dev/sd*}} partition, the second to the name you want to attribute). That should be enough.<br />
<br />
The big advantage is you can have everything automated, while setting up {{ic|/etc/crypttab}} with an external key file (i.e. the keyfile is not on any internal hard drive partition) can be a pain - you need to make sure the USB/FireWire/... device gets mounted before the encrypted partition, which means you have to change the order of {{ic|/etc/fstab}} (at least).<br />
<br />
Of course, if the {{Pkg|cryptsetup}} package gets upgraded, you will have to change this script again. However, this solution is to be preferred over hacking {{ic|/etc/rc.sysinit}} or similar files. Unlike {{ic|/etc/crypttab}}, only one partition is supported, but with some further hacking one should be able to have multiple partitions unlocked.<br />
<br />
If you want to do this on a software RAID partition, there is one more thing you need to do. Just setting the {{ic|/dev/mdX}} device in {{ic|/lib/initcpio/hooks/encrypt}} is not enough; the {{ic|encrypt}} hook will fail to find the key for some reason, and not prompt for a passphrase either. It looks like the RAID devices are not brought up until after the {{ic|encrypt}} hook is run. You can solve this by putting the RAID array in {{ic|/boot/grub/menu.lst}}, like <br />
kernel /boot/vmlinuz26 md=1,/dev/hda5,/dev/hdb5<br />
<br />
If you set up your root partition as a RAID, array you will notice the similarities with that setup ;-). [[GRUB]] can handle multiple array definitions just fine:<br />
kernel /boot/vmlinuz26 root=/dev/md0 ro md=0,/dev/sda1,/dev/sdb1 md=1,/dev/sda5,/dev/sdb5,/dev/sdc5<br />
<br />
=== LVM and dm-crypt manually (short version) ===<br />
<br />
==== Notes ====<br />
If you are enough smart enough for this, you will be smart enough to ignore/replace LVM-specific things, if you do not want to use LVM.<br />
<br />
{{Note|This brief uses reiserfs for some of the partitions, so change this accordingly if you want to use a more "normal" file system, like ext4.}}<br />
<br />
==== Partitioning scheme ====<br />
{{ic|/dev/sda1}} -> {{ic|/boot}}<br />
{{ic|/dev/sda2}} -> LVM<br />
<br />
==== The commands ====<br />
cryptsetup -d /dev/random -c aes-xts-plain -s 512 create lvm /dev/sda2<br />
dd if=/dev/urandom of=/dev/mapper/lvm<br />
cryptsetup remove lvm<br />
lvm pvcreate /dev/sda2<br />
lvm vgcreate lvm /dev/sda2<br />
lvm lvcreate -L 10G -n root lvm<br />
lvm lvcreate -L 500M -n swap lvm<br />
lvm lvcreate -L 500M -n tmp lvm<br />
lvm lvcreate -l 100%FREE -n home lvm<br />
cryptsetup luksFormat -c aes-xts-plain -s 512 /dev/lvm/root<br />
cryptsetup luksOpen /dev/lvm/root root<br />
mkreiserfs /dev/mapper/root<br />
mount /dev/mapper/root /mnt<br />
dd if=/dev/zero of=/dev/sda1 bs=1M<br />
mkreiserfs /dev/sda1<br />
mkdir /mnt/boot<br />
mount /dev/sda1 /mnt/boot<br />
mkdir -p -m 700 /mnt/etc/luks-keys<br />
dd if=/dev/random of=/mnt/etc/luks-keys/home bs=1 count=256<br />
<br />
==== Install Arch Linux ====<br />
Run {{ic|/arch/setup}}<br />
<br />
==== Configuration ====<br />
<br />
===== /etc/rc.conf =====<br />
Change {{ic|USELVM<nowiki>=</nowiki>"no"}} to {{ic|USELVM<nowiki>=</nowiki>"yes"}}.<br />
<br />
===== /etc/mkinitcpio.conf =====<br />
Put {{ic|lvm2}} and {{ic|encrypt}} (in that order) before {{ic|filesystems}} in the {{ic|HOOKS}} array. Again, note that you are setting encryption on '''top''' of LVM.)<br />
<br />
===== /boot/grub/menu.lst =====<br />
Change {{ic|root<nowiki>=</nowiki>/dev/hda3}} to {{ic|root<nowiki>=</nowiki>/dev/lvm/root}}.<br />
<br />
For kernel >= 2.6.30, you should change {{ic|root<nowiki>=</nowiki>/dev/hda3}} to the following:<br />
cryptdevice=/dev/lvm/root:root root=/dev/mapper/root<br />
<br />
===== /etc/fstab =====<br />
/dev/mapper/root / reiserfs defaults 0 1<br />
/dev/sda1 /boot reiserfs defaults 0 2<br />
/dev/mapper/tmp /tmp tmpfs defaults 0 0<br />
/dev/mapper/swap none swap sw 0 0<br />
<br />
===== /etc/crypttab =====<br />
swap /dev/lvm/swap SWAP -c aes-xts-plain -h whirlpool -s 512<br />
tmp /dev/lvm/tmp /dev/urandom -c aes-xts-plain -s 512<br />
<br />
==== After rebooting ====<br />
<br />
===== The commands =====<br />
cryptsetup luksFormat -c aes-xts-plain -s 512 /dev/lvm/home /etc/luks-keys/home<br />
cryptsetup luksOpen -d /etc/luks-keys/home /dev/lvm/home home<br />
mkreiserfs /dev/mapper/home<br />
mount /dev/mapper/home /home<br />
<br />
===== /etc/crypttab =====<br />
home /dev/lvm/home /etc/luks-keys/home<br />
<br />
===== /etc/fstab =====<br />
/dev/mapper/home /home reiserfs defaults 0 0<br />
<br />
=== / on LVM on LUKS ===<br />
Make sure your kernel command line looks like this:<br />
root=/dev/mapper/<volume-group>-<logical-volume> cryptdevice=/dev/<luks-part>:<volume-group><br />
For example:<br />
root=/dev/mapper/vg-arch cryptdevice=/dev/sda4:vg<br />
<br />
Or like this:<br />
cryptdevice=/dev/<volume-group>/<logical-volume>:root root=/dev/mapper/root<br />
<br />
== Resources ==<br />
* [http://yannickloth.be/blog/2010/08/01/installing-archlinux-with-software-raid1-encrypted-filesystem-and-lvm2/ Setup Archlinux on top of raid, LVM2 and encrypted partitions]<br />
* [http://www.freeotfe.org/ FreeOTFE] - Supports unlocking LUKS encrypted volumes in Microsoft Windows.</div>Nirevhttps://wiki.archlinux.org/index.php?title=Table_of_contents_(Portugu%C3%AAs)&diff=70206Table of contents (Português)2009-06-08T16:17:59Z<p>Nirev: </p>
<hr />
<div>[[Category:ArchWiki Tools (English)]]<br />
<br />
{{i18n_links_start}}<br />
{{i18n_entry|Česky|Table of Contents (Česky)}}<br />
{{i18n_entry|Deutsch|Table of Contents (Deutsch)}}<br />
{{i18n_entry|English|Table of Contents (English)}}<br />
{{i18n_entry|Español|Tabla de Contenidos (Español)}}<br />
{{i18n_entry|Français|Table des matières (Français)}}<br />
{{i18n_entry|Italiano|Table of Contents (Italiano)}}<br />
{{i18n_entry|Lietuviškai|Table of Contents (Lietuviškai)}}<br />
{{i18n_entry|Nederlands|Table of Contents (Nederlands)}}<br />
{{i18n_entry|Polski|Table of Contents (Polski)}}<br />
{{i18n_entry|Português do Brasil|Table of Contents (Português do Brasil)}}<br />
{{i18n_entry|Português|Índice de Conteúdos (Português)}}<br />
{{i18n_entry|Русский|Table of Contents (Русский)}}<br />
{{i18n_entry|Română|Table of Contents (Română)}}<br />
{{i18n_entry|Slovensky|Table of Contents (Slovensky)}}<br />
{{i18n_entry|ไทย|Table of Contents (ไทย)}}<br />
{{i18n_entry|Українська|Table of Contents (Українська)}}<br />
{{i18n_entry|简体中文|Table of Contents (简体中文)}}<br />
{{i18n_entry|繁體中文|Table of Contents (繁體中文)}}<br />
{{i18n_entry|正體中文|Table of Contents (正體中文)}}<br />
{{i18n_entry|Ελληνικά|Table of Contents (Ελληνικά)}}<br />
{{i18n_links_end}}<br />
<br />
*[[:Category: About Arch (English)|Sobre o Arch]]<br />
**[[:Category:Events (English)|Eventos]]<br />
*[[:Category: Getting and installing Arch (English)|Baixando e Instalando o Arch]]<br />
*[[:Category: System administration (English)|Administração do sistema]]<br />
**[[:Category:Hardware (English)|Hardware]]<br />
***[[:Category:Arch64 (English)|Arch64]]<br />
***[[:Category:CPU (English)|CPU]]<br />
***[[:Category:Communication and network (English)|Comunicação e rede]]<br />
***[[:Category:Graphics (English)|Gráficos]]<br />
***[[:Category:Hardware detection and troubleshooting (English)|Detecção de hardware e solução de problemas]]<br />
***[[:Category:I586 (English)|I586]]<br />
***[[:Category:Imaging (English)|Imagens]]<br />
***[[:Category:Input devices (English)|Dispositivos de Entrada]]<br />
***[[:Category:Laptops (English)|Laptops]]<br />
***[[:Category:Mainboards and BIOS (English)|Placas-mãe e BIOS]]<br />
***[[:Category:Optical (English)|Dispositivos Óticos (CDs e DVDs)]]<br />
***[[:Category:Other hardware (English)|Outros tipos de hardware]]<br />
***[[:Category:PowerPC (English)|PowerPC]]<br />
***[[:Category:Printers (English)|Impressoras]]<br />
***[[:Category:Sound (English)|Som]]<br />
***[[:Category:Storage (English)|Armazenamento]]<br />
**[[:Category:Kernel (English)|Kernel]]<br />
**[[:Category:Networking (English)|Rede]]<br />
**[[:Category:Security (English)|Segurança]]<br />
**[[:Category:Software (English)|Software]]<br />
***[[:Category:Boot process (English)|Processo de Inicialização]]<br />
***[[:Category:Command shells (English)|Shells em geral]]<br />
***[[:Category:Daemons and system services (English)|Daemons e serviços do sistema]]<br />
***[[:Category:Desktop environments (English)|Ambientes Desktop]]<br />
***[[:Category:Display managers (English)|Gerenciadores de tela]]<br />
***[[:Category:Dotfiles (English)|Arquivos-ponto]]<br />
***[[:Category:File systems (English)|Sistemas de arquivo]]<br />
***[[:Category:Fonts (English)|Fontes]]<br />
***[[:Category:Hardware detection and troubleshooting (English)|Hardware e detecção de problemas]]<br />
***[[:Category:Package management (English)|Gerenciamento de pacotes]]<br />
***[[:Category:Power management (English)|Gerenciamento de energia]]<br />
***[[:Category:X Server (English)|Servidor X]]<br />
*[[:Category: Desktop user's guide (English)|Guia do usuário desktop]]<br />
**[[:Category:Audio/Video (English)|Áudio/Vídeo]]<br />
**[[:Category:Development (English)|Desenvolvimento]]<br />
**[[:Category:Educational (English)|Educacional]]<br />
**[[:Category:Emulators (English)|Emuladores]]<br />
***[[:Category:Wine (English)|Wine]]<br />
**[[:Category:Eye candy (English)|Aparência]]<br />
**[[:Category:Games and entertainment (English)|Jogos e Entretenimento]]<br />
**[[:Category:Graphics and DTP (English)|Gráficos e DTP]]<br />
**[[:Category:Internationalization (English)|Internacionalização]]<br />
**[[:Category:Internet and Email (English)|Internet e Email]]<br />
**[[:Category:Office (English)|Escritório]]<br />
**[[:Category:Other desktop user's resources (English)|Outros recursos para usuário desktop]]<br />
**[[:Category:Scripts (English)|Scripts]]<br />
**[[:Category:Utilities (English)|Utilidades]]<br />
*[[:Category:System recovery (English)|Recuperação do sistema]]<br />
*[[:Category: Arch development (English)|Desenvolvimento do Arch]]<br />
**[[:Category:Package development (English)|Desenvolvimento de pacotes]]<br />
*[[:Category: Live Arch systems (English)|Sistemas Arch Live]]<br />
*[[:Category:ArchWiki Tools (English)|Ferramentas ArchWiki]]</div>Nirev