https://wiki.archlinux.org/api.php?action=feedcontributions&user=Wlmeng11&feedformat=atomArchWiki - User contributions [en]2024-03-28T20:14:27ZUser contributionsMediaWiki 1.41.0https://wiki.archlinux.org/index.php?title=MATLAB&diff=267832MATLAB2013-07-24T19:10:24Z<p>Wlmeng11: /* Install 32-bit Matlab on 64-bit system */ Student version of R2013a is 64-bit</p>
<hr />
<div>[[Category:Mathematics and science]]<br />
{{Article summary start}}<br />
{{Article summary text|This article contains information about the installation, configuration and use of MATLAB.}}<br />
{{Article summary heading|Related}}<br />
{{Article summary wiki|Octave}}<br />
{{Article summary wiki|Sage-mathematics}}<br />
{{Article summary wiki|Mathematica}}<br />
{{Article summary end}}<br />
From the [http://www.mathworks.com/products/matlab/ official website]:<br />
<br />
:''MATLAB is a high-level language and interactive environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java.''<br />
<br />
== General installation ==<br />
{{Warning|This should not be necessary for MATLAB R2013a+, which is compliant with Java 7 and does not require extra packages. Installation should be done with the install script provided by matlab.}}<br />
Use the following commands to mount and install Matlab. Note that the path to the install script should contain no spaces, or the install will fail. For graphical install and interface {{Pkg|libxp}} is needed. You may need to [[Pacman|install]] {{Pkg|libxp}} from the [[official repositories]] first. Note also that Matlab is not compliant with Java 7, so you may need to install, for example, {{Pkg|openjdk6}}.<br />
Install from iso file:<br />
# modprobe loop<br />
# mount -o loop matlab.iso /mnt/<br />
# /mnt/install<br />
<br />
Additionally, install {{Pkg|xorg-fonts-100dpi}}, {{Pkg|xorg-fonts-75dpi}}, and {{Pkg|xorg-fonts-type1}} so fonts are displayed properly in figures.<br />
<br />
=== Create Desktop and Menu Shortcuts ===<br />
If you choose Custom in Installation Type, the symlink will be created automatically. Otherwise, you may need to manually create a symlink in {{ic|/usr/local/bin}} to make it easier to launch in terminal:<br />
<br />
# ln -s /{MATLAB}/bin/matlab /usr/local/bin<br />
<br />
To create a menu item, we need to get a icon first:<br />
<br />
# wget http://upload.wikimedia.org/wikipedia/commons/2/21/Matlab_Logo.png -O /usr/share/icons/matlab.png<br />
<br />
Then create a new .desktop file in {{ic|/usr/share/applications}} with following lines:<br />
<br />
{{hc|/usr/share/applications/matlab.desktop|<nowiki><br />
#!/usr/bin/env xdg-open<br />
[Desktop Entry]<br />
Type=Application<br />
Icon=/usr/share/icons/matlab.png<br />
Name=MATLAB<br />
Comment=Start MATLAB - The Language of Technical Computing<br />
Exec=matlab -desktop<br />
Categories=Development;<br />
</nowiki><br />
}}<br />
<br />
You can also put this .desktop file in the Desktop folder to create a shortcut.<br />
<br />
More details see [https://help.ubuntu.com/community/MATLAB MATLAB - Community Ubuntu Documents]<br />
<br />
=== Install 32-bit Matlab on 64-bit system ===<br />
{{Note|Follow this section only if you have a student version before R2013a. All other releases since R2012b are 64-bit only.}}<br />
Unfortunately, there is no 64-bit version of the student version before R2013a. These instructions have been updated for R2012a student version. To start off we need to install a bunch of packages from the [[multilib]] repository (this list may be out of date): <br />
{{Pkg|lib32-mesa}}, {{Pkg|lib32-glu}}, {{Pkg|lib32-glibc}}, {{Pkg|lib32-libxmu}}, {{Pkg|lib32-zlib}}, {{Pkg|lib32-ncurses}}, {{Pkg|lib32-libxtst}}, {{Pkg|lib32-libxi}}, {{Pkg|lib32-libxrender}}, {{Pkg|lib32-libxfixes}}, {{Pkg|lib32-freetype2}}, {{Pkg|lib32-fontconfig}}, {{Pkg|lib32-libxdamage}}.<br />
A few packages from the [[AUR]] might also be needed: <br />
{{AUR|lib32-libxpm}}, {{AUR|lib32-libxp}}, {{AUR|bin32-openjdk6}} ({{Pkg|openjdk7}} might also work).<br />
<br />
Once they are installed: <br />
<br />
$ ./install -glnx86<br />
<br />
After fixing any library dependency problems, you will be able to guide the installer through the install process. If activation doesn't work in the installer you'll need to login to Wolfram's site and download a license file which you'll put in {{ic|${MATLAB}/licenses}}. After the install process, you'll need to create a symbolic link because the installer oddly thinks it's installing the 64-bit version of Matlab:<br />
<br />
$ cd ${MATLAB}/sys/java/jre<br />
$ ln -s glnx86 glnxa64<br />
<br />
In the above, ${MATLAB} should be replaced by the root directory you chose for your installation.<br />
<br />
You'll also need to put another link in Matlab's {{ic|bin}} folder because despite asking Matlab to install the 32bit version, it still thinks you want to use the 64bit one:<br />
<br />
$ cd ${MATLAB}/bin<br />
$ ln -s glnx86 glnxa64<br />
<br />
After that you'll need to edit the {{ic|${MATLAB}/bin/matlab}} script to get the java settings correct. After the comments at the top of the file, you'll need the line:<br />
<br />
export MATLAB_JAVA=/path/to/jre<br />
<br />
Where {{ic|/path/to/jre}} will be {{ic|/opt/java/jre}} if you're using Sun's JRE. The path is one level up from where {{ic|rt.jar}} is located. That is, {{ic|rt.jar}} should be in {{ic|/opt/java/jre/libs}} if you used {{ic|/opt/java/jre}} for {{ic|MATLAB_JAVA}}. In Matlab R2010a it works pretty well, if you use the internal JRE with:<br />
<br />
export MATLAB_JAVA=${MATLAB}/sys/java/jre/glnx86/jre<br />
<br />
If using {{AUR|bin32-openjdk6}}, use<br />
<br />
export MATLAB_JAVA=/usr/lib/jvm/java-7-openjdk/jre/<br />
<br />
To run it, you'll need to:<br />
<br />
$ ${MATLAB}/bin/matlab -glnx86 -desktop<br />
<br />
At this point you may have to resolve more library dependencies or troubleshoot [[Java]]. Your version of Matlab may need a specific version of Sun's JRE installed.<br />
<br />
=== Install supported compiler ===<br />
<br />
In order for Matlab to work with C code (needed for simulink) it is necessarry to install a supported compiler. Install {{AUR|gcc44}} from the AUR.<br />
<br />
Then edit {{ic|${MATLAB}/bin/mexopts.sh}} and replace all occurances of CC='gcc' with CC='gcc-4.4' and CXX='g++' with CXX='g++-4.4'. Afterwards run <br />
mex -setup<br />
in Matlab and select the {{ic|mexopts.sh}} file.<br />
<br />
== Troubleshooting ==<br />
As one installs Matlab, it might complain that it can't find a package, for the most part just look at the package name and then install it with [[Pacman]], or in the case of x86_64 there are some libraries only in [[AUR]].<br />
<br />
==== License: invalid machine id ====<br />
The installer may complain about an invalid machine id, because it is looking for a network interface named eth0 to get a MAC address for activation, while new Arch Linux setups do not have a network interface called eth0 (systemd uses [http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames Predictable Network Interface Names]). Just [[rename network interfaces|change the name of the interface]].<br />
<br />
In a nutshell: install {{Pkg|wireless_tools}} and execute the following:<br />
# systemctl stop NetworkManager<br />
# ifrename -i enp2s0f0 -n eth0<br />
# systemctl start NetworkManager<br />
<br />
This will be needed after each reboot. To make it permanent:<br />
# ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules<br />
<br />
The machine id should now be different than 000000000000 and you should be able to install and activate MATLAB without problems. <br />
<br />
==== Resolving start warnings/errors ====<br />
<br />
* Even if all needed libraries are installed, Matlab when starting can still report some missing libraries. This is resolved by symbolic linking of needed libraries to directories that Matlab checks at start-up. For example, if Matlab triggers error/warning about missing {{ic|/lib64/libc.so.6}} library, this can be resolved by:<br />
<br />
# ln -s /lib/libc.so.6 /lib64<br />
<br />
* Matlab R2011b with an up-to-date Arch Linux (as of March 12, 2012) fails on startup with the familiar "Failure loading desktop class." A solution is to point Matlab to the system JVM (confirmed to work with the {{Pkg|jdk7-openjdk}} package):<br />
<br />
export MATLAB_JAVA=/usr/lib/jvm/java-7-openjdk/jre<br />
<br />
==== MATLAB crashes when displaying graphics ====<br />
<br />
To identify this error, start MATLAB with<br />
<br />
LIBGL_DEBUG=verbose matlab<br />
<br />
from the terminal and try to collect OpenGL information with {{ic|opengl info}} from the MATLAB command prompt. If it crashes again and there is an output line like <br />
<br />
libGL error: dlopen /usr/lib/xorg/modules/dri/swrast_dri.so failed <br />
(/usr/local/MATLAB/R2011b/bin/glnxa64/../../sys/os/glnxa64/libstdc++.so.6: <br />
version `GLIBCXX_3.4.15' not found (required by /usr/lib/xorg/modules/dri/swrast_dri.so))<br />
<br />
then the problem is that MATLAB uses its own GNU C++ library, which is an older version than the up-to-date version on your Archlinux system. Make MATLAB use the current C++ library for your system by<br />
<br />
cd /usr/local/MATLAB/R(your release)/sys/os/glnxa64<br />
sudo unlink libstdc++.so.6<br />
sudo ln -s /usr/lib/libstdc++.so.6<br />
<br />
==== Blank/grey UI when using DWM/Awesome ====<br />
<br />
wmname LG3D<br />
<br />
== OpenGL Acceleration ==<br />
<br />
Once Matlab is installed type the following in the interpreter:<br />
<br />
>> opengl info<br />
<br />
The output should be similar to the following:<br />
<br />
{{bc|<nowiki><br />
Version = 2.0 Mesa 7.8.2<br />
Vendor = Advanced Micro Devices, Inc.<br />
Renderer = Mesa DRI R600 (RV710 9552) 20090101 x86/MMX/SSE2 TCL DRI2<br />
MaxTextureSize = 4096<br />
Visual = 0xcb (TrueColor, depth 24, RGB mask 0xff0000 0xff00 0x00ff)<br />
Software = false<br />
# of Extensions = 107<br />
<br />
Driver Bug Workarounds:<br />
OpenGLBitmapZbufferBug = 0<br />
OpenGLWobbleTesselatorBug = 0<br />
OpenGLLineSmoothingBug = 0<br />
OpenGLClippedImageBug = 0<br />
OpenGLEraseModeBug = 0<br />
</nowiki>}}<br />
This will vary with card you are using, but the important part is "Software = false". If it's not "false" for you, then there is a problem with your hardware acceleration.<br />
<br />
=== NVIDIA ===<br />
<br />
With an [[Nvidia|NVIDIA]] card, the output should be similar to this:<br />
{{bc|<nowiki><br />
>> opengl info<br />
Version = 2.1.2 NVIDIA 177.82<br />
Vendor = NVIDIA Corporation<br />
Renderer = Quadro NVS 140M/PCI/SSE2<br />
MaxTextureSize = 8192<br />
Visual = 0x21 (TrueColor, depth 16, RGB mask 0xf800 0x07e0 0x001f)<br />
Software = false<br />
# of Extensions = 144<br />
<br />
Driver Bug Workarounds:<br />
OpenGLBitmapZbufferBug = 0<br />
OpenGLWobbleTesselatorBug = 0<br />
OpenGLLineSmoothingBug = 0<br />
OpenGLClippedImageBug = 1<br />
OpenGLEraseModeBug = 0<br />
</nowiki>}}<br />
<br />
With the NVIDIA card all it required to start working was to copy the {{ic|libGLU.so}} from the Matlab installed library {{ic|${MATLAB}/sys/opengl/lib/glnx86/libGLU.so}} to {{ic|/usr/lib directory}}. Note that in x86_64 this might be a different directory.<br />
<br />
{{Note|Although, not thoroughly tested, using {{Pkg|lib32-nvidia-utils}} seems to work as well.}}</div>Wlmeng11https://wiki.archlinux.org/index.php?title=Lenovo_ThinkPad_X220&diff=259035Lenovo ThinkPad X2202013-05-26T23:21:02Z<p>Wlmeng11: /* Setup */ can't boot GPT with BIOS</p>
<hr />
<div>[[Category:Lenovo]]<br />
{{Stub}}<br />
<br />
== Setup ==<br />
=== Graphics ===<br />
The graphic card is supported by the xf86-video-intel driver package from the extra repository. The Xorg server makes use of this automatically. There's no need for a Xorg configuration file.<br />
pacman -S xf86-video-intel<br />
<br />
===Booting===<br />
The X220 cannot boot from a GPT disk with legacy BIOS, so either use an MBR disk or setup UEFI.<br />
<br />
== Configuration ==<br />
<br />
=== Heat issues ===<br />
<br />
According to a [https://bbs.archlinux.org/viewtopic.php?pid=1030495#p1030495 forum post] you should set some power saving options in '''/etc/modprobe.d/modprobe.conf''' or add them to your ''kernel'' line in your '''menu.lst'''. We use rc6=7 for deepest sleep mode.<br />
options i915 modeset=1<br />
options i915 i915_enable_rc6=7<br />
options i915 i915_enable_fbc=1 <br />
options i915 lvds_downclock=1<br />
<br />
As well you could suffer of [https://bbs.archlinux.org/viewtopic.php?id=150743 Kernel Power Regressions].<br />
<br />
=== My laptop gets stuck in a reboot loop if I resume from suspend! Help! ===<br />
<br />
This can be caused by the EFI storage getting too full. Run the following commands as root to free up some space -<br />
<br />
# First clear the pstore<br />
mkdir -p /dev/pstore<br />
mount -t pstore pstore /dev/pstore<br />
ls /dev/pstore # <- Nothing important should be here, but check first anyway<br />
rm /dev/pstore/*<br />
<br />
# Next some EFI variables. These are used/created by pstore, but I've had them even though <br />
#I deleted the pstore data using the above commands. YMMV.<br />
rm /sys/firmware/efi/efivars/dump-type0-*<br />
<br />
This information was taken from [http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/x220-does-not-resume-from-sleep/m-p/1083233/highlight/false#M48825 the Lenovo forums]<br />
<br />
==See also==<br />
* Arch user blogs about the X220 <br />
** [http://natalian.org/archives/2011/11/10/Thinkpad_X220/ Thinkpad X220 model 4287CTO] using a msata SSD for 64 bit Archlinux<br />
** [http://blog.jamiek.it/2011/10/arch-linux-on-thinkpad-x220.html X220 i5]<br />
* [http://www.thinkwiki.org/wiki/Category:X220 Thinkwiki X220 reference]<br />
* [https://bbs.archlinux.org/viewtopic.php?id=129885 "Arch By Hand" UEFI GPT SSD LUKS Install Script], built on an x220 tablet with an SSD.<br />
* [http://forum.notebookreview.com/lenovo-ibm/575569-linux-x220-29.html#post8075286 Power saving options for the X220 - Notebook Review Forum]</div>Wlmeng11https://wiki.archlinux.org/index.php?title=Beginners%27_guide&diff=243655Beginners' guide2013-01-13T03:42:28Z<p>Wlmeng11: /* EFISTUB */ Added note to clarify which device to use in refind configuration</p>
<hr />
<div><noinclude><br />
[[Category:Getting and installing Arch]]<br />
[[Category:About Arch]]<br />
[[da:Beginners' Guide/Installation]]<br />
[[es:Beginners' Guide/Installation]]<br />
[[hr:Beginners' Guide/Installation]]<br />
[[hu:Beginners' Guide/Installation]]<br />
[[it:Beginners' Guide/Installation]]<br />
[[ja:Beginners' Guide/Installation]]<br />
[[ko:Beginners' Guide/Installation]]<br />
[[nl:Beginners' Guide/Installatie]]<br />
[[pl:Beginners' Guide/Installation]]<br />
[[pt:Beginners' Guide/Installation]]<br />
[[ro:Ghidul începătorilor/Instalare]]<br />
[[ru:Beginners' Guide/Installation]]<br />
[[sr:Beginners' Guide/Installation]]<br />
[[zh-CN:Beginners' Guide/Installation]]<br />
{{Tip|This is part of a multi-page article for The Beginners' Guide. '''[[Beginners' Guide|Click here]]''' if you would rather read the guide in its entirety.}}<br />
</noinclude><br />
== Installation ==<br />
<br />
You are now presented with a shell prompt, automatically logged in as root.<br />
<br />
=== Change the language ===<br />
<br />
{{Tip|These are optional for the majority of users. Useful only if you plan on writing in your own language in any of the configuration files, if you use diacritical marks in the Wi-Fi password, or if you would like to receive system messages (e.g. possible errors) in your own language.}}<br />
<br />
By default, the keyboard layout is set to {{ic|us}}. If you have a non-[[Wikipedia:File:KB United States-NoAltGr.svg|US]] keyboard layout, run:<br />
<br />
# loadkeys ''layout''<br />
<br />
...where ''layout'' can be {{ic|fr}}, {{ic|uk}}, {{ic|be-latin1}}, etc. See [[KEYMAP#Keyboard layouts|here]] for a comprehensive list.<br />
<br />
The font should also be changed, because most languages use more glyphs than the 26 letter [[Wikipedia:English alphabet|English alphabet]]. Otherwise some foreign characters may show up as white squares or as other symbols. Note that the name is case-sensitive, so please type it ''exactly'' as you see it:<br />
<br />
# setfont Lat2-Terminus16<br />
<br />
By default, the language is set to English (US). If you would like to change the language for the install process ''(German, in this example)'', remove the {{ic|#}} in front of the [http://www.greendesktiny.com/support/knowledgebase_detail.php?ref=EUH-483 locale] you want from {{ic|/etc/locale.gen}}, along with English (US). Please choose the {{ic|UTF-8}} entry.<br />
<br />
Use {{Keypress|Ctrl+X}} to exit, and when prompted to save changes, press {{Keypress|Y}} and {{Keypress|Enter}} to use the same filename.<br />
<br />
{{hc|# nano /etc/locale.gen|<br />
en_US.UTF-8 UTF-8<br />
de_DE.UTF-8 UTF-8}}<br />
<br />
# locale-gen<br />
# export LANG=de_DE.UTF-8<br />
<br />
Remember, {{Keypress|LAlt+LShift}} activates and deactivates the keymap.<br />
<br />
=== Establish an internet connection ===<br />
<br />
The {{ic|dhcpcd}} network daemon is started automatically at boot and it will attempt to start a wired connection, if available. Try pinging a website to see if it was successful. And since Google is always on...<br />
<br />
{{hc|# ping -c 3 www.google.com|2=<br />
PING www.l.google.com (74.125.132.105) 56(84) bytes of data.<br />
64 bytes from wb-in-f105.1e100.net (74.125.132.105): icmp_req=1 ttl=50 time=17.0 ms<br />
64 bytes from wb-in-f105.1e100.net (74.125.132.105): icmp_req=2 ttl=50 time=18.2 ms<br />
64 bytes from wb-in-f105.1e100.net (74.125.132.105): icmp_req=3 ttl=50 time=16.6 ms<br />
<br />
--- www.l.google.com ping statistics ---<br />
3 packets transmitted, 3 received, 0% packet loss, time 2003ms<br />
rtt min/avg/max/mdev = 16.660/17.320/18.254/0.678 ms}}<br />
<br />
If you get a {{ic|ping: unknown host}} error, you will need to set up the network manually, as explained below.<br />
<br />
Otherwise, move on to [[#Prepare the storage drive|Prepare the storage drive]].<br />
<br />
==== Wired ====<br />
<br />
Follow this procedure if you need to set up a wired connection via a static IP address.<br />
<br />
If your computer is connected to an Ethernet network, in most cases, you will have one interface, called {{ic|eth0}}. If you have additional network cards (apart from the one integrated on the motherboard, for example), their name will follow the sequence {{ic|eth1}}, {{ic|eth2}}, etc.<br />
<br />
You need to know these settings:<br />
<br />
* Static IP address.<br />
* Subnet mask.<br />
* Gateway's IP address.<br />
* Name servers' (DNS) IP addresses.<br />
* Domain name (unless you're on a local LAN, in which case you can make it up).<br />
<br />
Activate the connected Ethernet interface (e.g. {{ic|eth0}}):<br />
<br />
# ip link set eth0 up<br />
<br />
Add the address:<br />
<br />
# ip addr add <ip address>/<subnetmask> dev <interface><br />
<br />
For example:<br />
<br />
# ip addr add 192.168.1.2/24 dev eth0<br />
<br />
For more options, run {{ic|man ip}}.<br />
<br />
Add your gateway like this, substituting your own gateway's IP address:<br />
<br />
# ip route add default via <ip address><br />
<br />
For example:<br />
<br />
# ip route add default via 192.168.1.1<br />
<br />
Edit {{ic|resolv.conf}}, substituting your name servers' IP addresses and your local domain name:<br />
<br />
{{hc|# nano /etc/resolv.conf|<br />
nameserver 61.23.173.5<br />
nameserver 61.95.849.8<br />
search example.com}}<br />
<br />
{{Note|Currently, you may include a maximum of 3 {{ic|nameserver}} lines.}}<br />
<br />
You should now have a working network connection. If you do not, check the detailed [[Network Configuration]] page.<br />
<br />
==== Wireless ====<br />
<br />
Follow this procedure if you need wireless connectivity (Wi-Fi) during the installation process.<br />
<br />
The wireless drivers and utilities are now available to you in the live environment of the installation media. A good knowledge of your wireless hardware will be of key importance to successful configuration. Note that the following quick-start procedure ''executed at this point in the installation'' will initialize your wireless hardware for use ''in the live environment of the installation media''. These steps (or some other form of wireless management) '''must be repeated from the actual installed system after booting into it'''.<br />
<br />
Also note that these steps are optional if wireless connectivity is unnecessary at this point in the installation; wireless functionality may always be established later.<br />
<br />
{{Note|The following examples use {{ic|wlan0}} for the interface and {{ic|linksys}} for the ESSID. Remember to change these values according to your setup.}}<br />
<br />
The basic procedure will be:<br />
<br />
* (optional) Identify the wireless interface:<br />
<br />
# lspci | grep -i net<br />
<br />
Or, if using a USB adapter:<br />
<br />
# lsusb<br />
<br />
* Ensure udev has loaded the driver, and that the driver has created a usable wireless kernel interface with {{ic|iwconfig}}:<br />
<br />
{{Note|If you do not see output similar to this, then your wireless driver has not been loaded. If this is the case, you must load the driver yourself. Please see [[Wireless Setup]] for more detailed information.}}<br />
<br />
{{hc|# iwconfig|2=<br />
lo no wireless extensions.<br />
eth0 no wireless extensions.<br />
wlan0 unassociated ESSID:""<br />
Mode:Managed Channel=0 Access Point: Not-Associated<br />
Bit Rate:0 kb/s Tx-Power=20 dBm Sensitivity=8/0<br />
Retry limit:7 RTS thr:off Fragment thr:off<br />
Power Management:off<br />
Link Quality:0 Signal level:0 Noise level:0<br />
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br />
Tx excessive retries:0 Invalid misc:0 Missed beacon:0}}<br />
<br />
In this example, {{ic|wlan0}} is the available wireless interface.<br />
<br />
* Bring the interface up with:<br />
<br />
# ip link set wlan0 up<br />
<br />
A small percentage of wireless chipsets also require firmware, in addition to a corresponding driver. If the wireless chipset requires firmware, you are likely to receive this error when bringing the interface up:<br />
<br />
{{hc|# ip link set wlan0 up|<br />
SIOCSIFFLAGS: No such file or directory}}<br />
<br />
If unsure, invoke {{ic|dmesg}} to query the kernel log for a firmware request from the wireless chipset.<br />
<br />
Example output from an Intel chipset which requires and has requested firmware from the kernel at boot:<br />
<br />
{{hc|# dmesg <nowiki>|</nowiki> grep firmware|<br />
firmware: requesting iwlwifi-5000-1.ucode}}<br />
<br />
If there is no output, it may be concluded that the system's wireless chipset does not require firmware.<br />
<br />
{{Warning|Wireless chipset firmware packages (for cards which require them) are pre-installed under {{ic|/usr/lib/firmware}} in the live environment (on CD/USB stick) '''but must be explicitly installed to your actual system to provide wireless functionality after you reboot into it!''' Package installation is covered later in this guide. Ensure installation of both your wireless module and firmware before rebooting! See [[Wireless Setup]] if you are unsure about the requirement of corresponding firmware installation for your particular chipset.}}<br />
<br />
Next, use {{Pkg|netcfg}}'s {{ic|wifi-menu}} to connect to a network:<br />
<br />
# wifi-menu wlan0<br />
<br />
You should now have a working network connection. If you do not, check the detailed [[Wireless Setup]] page.<br />
<br />
==== xDSL (PPPoE), analog modem or ISDN ====<br />
<br />
If you have a router in bridge mode, run:<br />
<br />
# pppoe-setup<br />
<br />
* Type in the username that the ISP provided you with.<br />
* Press {{Keypress|Enter}} for "eth0".<br />
* Press {{Keypress|Enter}} for "no", so that it stays up continuously.<br />
* Type {{ic|server}} (since this is usually the case).<br />
* Press {{Keypress|1}} for a firewall.<br />
* Type in the password that the ISP provided you with.<br />
* Press {{Keypress|Y}} at the end.<br />
<br />
To use these settings and connect to your ISP, run:<br />
<br />
# pppoe-start<br />
<br />
You may also need to adjust your {{ic|resolv.conf}}:<br />
<br />
# echo nameserver 8.8.8.8 > /etc/resolv.conf<br />
<br />
If you have a dial-up or ISDN connection, see [[Direct Modem Connection]].<br />
<br />
==== Behind a proxy server ====<br />
<br />
If you are behind a proxy server, you will need to export the {{ic|http_proxy}} and {{ic|ftp_proxy}} environment variables. See [[Proxy settings]] for more information.<br />
<br />
=== Prepare the storage drive ===<br />
<br />
{{Warning|Partitioning can destroy data. You are '''strongly''' cautioned and advised to backup any critical data before proceeding.}}<br />
<br />
Absolute beginners are encouraged to use a graphical partitioning tool. [http://gparted.sourceforge.net/download.php GParted] is a good example, and is [http://gparted.sourceforge.net/livecd.php provided as a "live" CD]. It is also included on live CDs of most Linux distributions such as [[Wikipedia:Ubuntu (operating system)|Ubuntu]] and [[Wikipedia:Linux Mint|Linux Mint]]. A drive should first be [[partitioning|partitioned]] and the partitions should be formatted with a [[File Systems|file system]] before rebooting.<br />
<br />
It's possible to set up a swap file at any point after installation, so there is no need to decide on swap size now. See [[Swap]] for details if you wish to set up a swap partition now (but note that it's much easier to resize a file than a partition).<br />
<br />
If you have already done so, proceed to [[#Mount the partitions|Mount the partitions]].<br />
<br />
Otherwise, see the following example.<br />
<br />
==== Example ====<br />
<br />
The Arch Linux install media includes the following partitioning tools:<br />
<br />
* [[Wikipedia:gdisk|gdisk]] and [[Wikipedia:cgdisk|cgdisk]] – support only [[GPT]] partition tables.<br />
<br />
* [[Wikipedia:fdisk|fdisk]] and [[Wikipedia:cfdisk|cfdisk]] – support only [[MBR]] partition tables.<br />
<br />
* [[Wikipedia:GNU Parted|parted]] – supports both.<br />
<br />
This example uses '''cfdisk''', but it can easily be followed using '''cgdisk''', which will allow for GPT instead of MBR partitioning.<br />
<br />
{{Box BLUE|Notes regarding [[UEFI]] boot:|<br />
* If you have a UEFI motherboard, you will need to create an extra [[Unified Extensible Firmware Interface#Create an UEFI System Partition_in_Linux|UEFI System partition]].<br />
* It is recommended to always use GPT for UEFI boot, as some UEFI firmwares do not allow UEFI-MBR boot.}}<br />
<br />
{{Box BLUE|Notes regarding [[GPT]] partitioning:|<br />
* If you are not dual booting with Windows, then it is advisable to use GPT instead of MBR. Read [[GPT]] for a list of advantages.<br />
* If you have a BIOS motherboard (or plan on booting in BIOS compatibility mode) and you want to setup GRUB on a GPT-partitioned drive, you will need to create a 2 MiB "[[GRUB#GPT specific instructions|BIOS Boot Partition]]". Syslinux doesn't need one.<br />
* Some BIOS systems may have issues with GPT. See http://mjg59.dreamwidth.org/8035.html and http://rodsbooks.com/gdisk/bios.html for more info and possible workarounds.}}<br />
<br />
{{Note|If you are installing to a USB flash key, see [[Installing Arch Linux on a USB key]].}}<br />
<br />
# cfdisk /dev/sda<br />
<br />
The example system will contain a 15 GB root partition, and a [[Partitioning#/home|home]] partition for the remaining space.<br />
<br />
It should be emphasized that partitioning is a personal choice and that this example is only for illustrative purposes. See [[Partitioning]].<br />
<br />
'''Root:'''<br />
<br />
* Choose New (or press {{Keypress|N}}) – {{Keypress|Enter}} for Primary – type in "15360" – {{Keypress|Enter}} for Beginning – {{Keypress|Enter}} for Bootable.<br />
<br />
'''Home:'''<br />
<br />
* Press the down arrow to move to the free space area.<br />
* Choose New (or press {{Keypress|N}}) – {{Keypress|Enter}} for Primary – {{Keypress|Enter}} to use the rest of the drive (or you could type in the desired size).<br />
<br />
Here's how it should look like:<br />
<br />
Name Flags Part Type FS Type [Label] Size (MB)<br />
-----------------------------------------------------------------------<br />
sda1 Boot Primary Linux 15360<br />
sda2 Primary Linux 133000*<br />
<br />
Double check and make sure that you are happy with the partition sizes as well as the partition table layout before continuing.<br />
<br />
If you would like to start over, you can simply select Quit (or press {{Keypress|Q}}) to exit without saving changes and then restart cfdisk.<br />
<br />
If you are satisfied, choose Write (or press {{Keypress|Shift+W}}) to finalize and to write the partition table to the drive. Type "yes" and choose Quit (or press {{Keypress|Q}}) to exit cfdisk without making any more changes.<br />
<br />
Simply partitioning is not enough; the partitions also need a [[File Systems|filesystem]]. To format the partitions with an ext4 filesystem:<br />
<br />
{{Warning|Double check and triple check that it's actually {{ic|/dev/sda1}} and {{ic|/dev/sda2}} that you want to format.}}<br />
<br />
# mkfs.ext4 /dev/sda1<br />
# mkfs.ext4 /dev/sda2<br />
<br />
If you have made a partition dedicated to swap (code 82), don't forget to format and activate it with:<br />
<br />
# mkswap /dev/sda''X''<br />
# swapon /dev/sda''X''<br />
<br />
=== Mount the partitions ===<br />
<br />
Each partition is identified with a number suffix. For example, {{ic|sda1}} specifies the first partition of the first drive, while {{ic|sda}} designates the entire drive.<br />
<br />
To display the current partition layout:<br />
<br />
# lsblk /dev/sda<br />
<br />
Pay attention, because the mounting order is important.<br />
<br />
First, mount the root partition on {{ic|/mnt}}. Following the example above (yours may be different), it would be:<br />
<br />
# mount /dev/sda1 /mnt<br />
<br />
Then mount the {{ic|/home}} partition and any other separate partition ({{ic|/boot}}, {{ic|/var}}, etc), if you have any:<br />
<br />
# mkdir /mnt/home<br />
# mount /dev/sda2 /mnt/home<br />
<br />
In case you have a UEFI motherboard, mount the UEFI partition:<br />
<br />
# mkdir /mnt/boot/efi<br />
# mount /dev/sda''X'' /mnt/boot/efi<br />
<br />
=== Select a mirror ===<br />
<br />
Before installing, you may want to edit the {{ic|mirrorlist}} file and place your preferred mirror first. A copy of this file will be installed on your new system by {{ic|pacstrap}} as well, so it's worth getting it right.<br />
<br />
{{hc|# nano /etc/pacman.d/mirrorlist|<br />
##<br />
## Arch Linux repository mirrorlist<br />
## Sorted by mirror score from mirror status page<br />
## Generated on 2012-MM-DD<br />
##<br />
<br />
<nowiki>Server = http://mirror.example.xyz/archlinux/$repo/os/$arch</nowiki><br />
...}}<br />
<br />
* {{Keypress|Alt+6}} to copy a {{ic|Server}} line.<br />
* {{Keypress|PageUp}} key to scroll up.<br />
* {{Keypress|Ctrl+U}} to paste it at the top of the list.<br />
* {{Keypress|Ctrl+X}} to exit, and when prompted to save changes, press {{Keypress|Y}} and {{Keypress|Enter}} to use the same filename.<br />
<br />
If you want, you can make it the ''only'' mirror available by getting rid of everything else (using {{Keypress|Ctrl+K}}), but it's usually a good idea to have a few more, in case the first one goes offline.<br />
<br />
{{Tip|<br />
* Use the [https://www.archlinux.org/mirrorlist/ Mirrorlist Generator] to get an updated list for your country. HTTP mirrors are faster than FTP, because of something called [[Wikipedia:Keepalive|keepalive]]. With FTP, pacman has to send out a signal each time it downloads a package, resulting in a brief pause. For other ways to generate a mirror list, see [[Mirrors#Sorting mirrors|Sorting mirrors]] and [[Reflector]].<br />
* [https://archlinux.org/mirrors/status/ Arch Linux MirrorStatus] reports various aspects about the mirrors such as network problems with mirrors, data collection problems, the last time mirrors have been synced, etc.}}<br />
<br />
{{Note|<br />
* Whenever in the future you change your list of mirrors, always remember to force pacman to refresh all package lists with {{ic|pacman -Syy}}. This is considered to be good practice and will avoid possible headaches. See [[Mirrors]] for more information.<br />
* If you're using an older installation medium, your mirrorlist might be outdated, which might lead to problems when updating Arch Linux (see {{Bug|22510}}). Therefore it is advised to obtain the latest mirror information as described above.<br />
* Some issues have been reported in the [https://bbs.archlinux.org/ Arch Linux forums] regarding network problems that prevent pacman from updating/synchronizing repositories (see [https://bbs.archlinux.org/viewtopic.php?id&#61;68944] and [https://bbs.archlinux.org/viewtopic.php?id&#61;65728]). When installing Arch Linux natively, these issues have been resolved by replacing the default pacman file downloader with an alternative (see [[Improve Pacman Performance]] for more details). When installing Arch Linux as a guest OS in [[VirtualBox]], this issue has also been addressed by using "Host interface" instead of "NAT" in the machine properties.}}<br />
<br />
=== Install the base system ===<br />
<br />
The base system is installed using the [https://github.com/falconindy/arch-install-scripts/blob/master/pacstrap.in pacstrap] script.<br />
<br />
The {{ic|-i}} switch can be omitted if you wish to install every package from the ''base'' and ''base-devel'' groups without prompting.<br />
<br />
# pacstrap -i /mnt base base-devel<br />
<br />
{{Note|If pacman fails to verify your packages, check the system time with {{ic|cal}}. If the system date is invalid (e.g. it shows year 2010), signing keys will be considered expired (or invalid), signature checks on packages will fail and installation will be interrupted. Make sure to correct the system time, either by doing so manually or with the {{Pkg|ntp}} client, and retry running the pacstrap command. Refer to [[Time]] page for more information on correcting system time.}}<br />
<br />
* {{Grp|base}}: Software packages from the [core] repo to provide the minimal base environment.<br />
<br />
* {{Grp|base-devel}}: Extra tools from [core] such as {{ic|make}}, and {{ic|automake}}. Most beginners should choose to install it, as it will likely be needed to expand the system. The ''base-devel'' group will be required to install software from the [[Arch User Repository]].<br />
<br />
This will give you a basic Arch system. Other packages can be installed later using [[pacman]].<br />
<br />
=== Generate an fstab ===<br />
<br />
Generate an [[fstab]] file with the following command. UUIDs will be used because they have certain advantages (see [[fstab#Identifying filesystems]]). If you would prefer to use labels instead, replace the {{ic|-U}} option with {{ic|-L}}.<br />
<br />
{{Note|If you encounter errors running genfstab or later in the install process, do '''not''' run genfstab again; just edit the fstab file.}}<br />
<br />
# genfstab -U -p /mnt >> /mnt/etc/fstab<br />
# nano /mnt/etc/fstab<br />
<br />
{{Warning|The fstab file should always be checked after generating it. If you made an EFI system partition earlier, then {{ic|genfstab}} has incorrectly added options to your EFI system partition. This will in fact ''prevent'' your computer from booting from that drive, so you need to remove all options for the EFI partition except for {{ic|noatime}}. For the other partitions that use it, be sure to replace {{ic|1="codepage=cp437"}} with {{ic|1="codepage=437"}} or else when you next reboot, any mounts with this option will fail and systemd will halt and drop into recovery mode. This should be fixed by linux 3.8}}<br />
<br />
A few considerations:<br />
<br />
* Please take the time to align the columns properly, using spaces and the {{Keypress|Tab}} key, like in the examples from the [[fstab]] page. This way it's easier to read and also easier to spot a potential problem.<br />
* Only the root ({{ic|/}}) partition needs {{ic|1}} for the last field. Everything else should have either {{ic|2}} or {{ic|0}} (see [[fstab#Field definitions]]).<br />
* The {{ic|1=data=ordered}} option can be removed, because it will be used automatically whether you specify it or not. No point in cluttering up your fstab.<br />
* Though its presence will not do any harm, you may remove the {{ic|tmpfs}} entry, as this is now handled by systemd's {{ic|tmp.mount}} unit. To disable it, you must remove the fstab line and run:<br />
: {{bc|# systemctl mask tmp.mount}}<br />
<br />
=== Chroot and configure the base system ===<br />
<br />
Next, we [[chroot]] into our newly installed system:<br />
<br />
# arch-chroot /mnt<br />
<br />
{{Note|Use {{ic|arch-chroot /mnt /bin/bash}} to chroot into a bash shell.}}<br />
At this stage of the installation, you will configure the primary configuration files of your Arch Linux base system. These can either be created if they do not exist, or edited if you wish to change the defaults.<br />
<br />
Closely following and understanding these steps is of key importance to ensure a properly configured system.<br />
<br />
==== Locale ====<br />
<br />
Locales are used by '''glibc''' and other locale-aware programs or libraries for rendering text, correctly displaying regional monetary values, time and date formats, alphabetic idiosyncrasies, and other locale-specific standards.<br />
<br />
There are two files that need editing: {{ic|locale.gen}} and {{ic|locale.conf}}.<br />
<br />
* The {{ic|locale.gen}} file is empty by default (everything is commented out) and you need to remove the {{ic|#}} in front of the line(s) you want. You may uncomment more lines than just English (US), as long as you choose their {{ic|UTF-8}} encoding:<br />
<br />
{{hc|# nano /etc/locale.gen|<br />
en_US.UTF-8 UTF-8<br />
de_DE.UTF-8 UTF-8}}<br />
<br />
# locale-gen<br />
<br />
This will run on every '''glibc''' upgrade, generating all the locales specified in {{ic|/etc/locale.gen}}.<br />
<br />
* The {{ic|locale.conf}} file doesn't exist by default. Setting only {{ic|LANG}} should be enough. It will act as the default value for all other variables.<br />
<br />
# echo LANG=en_US.UTF-8 > /etc/locale.conf<br />
# export LANG=en_US.UTF-8<br />
<br />
{{Note|If you set some other language than English at the beginning of the install, the above commands would be something like:<br />
# echo LANG<nowiki>=</nowiki>de_DE.UTF-8 > /etc/locale.conf<br />
# export LANG<nowiki>=</nowiki>de_DE.UTF-8<br />
}}<br />
<br />
To use other {{ic|LC_*}} variables, first run {{ic|locale}} to see the available options. An advanced example can be found [[Locale#Setting_system-wide_locale|here]].<br />
<br />
{{Warning|Using the {{ic|LC_ALL}} variable is strongly discouraged because it overrides everything.}}<br />
<br />
==== Console font and keymap ====<br />
<br />
If you set a keymap at [[#Change_the_language|the beginning]] of the install process, load it now, as well, because the environment has changed. For example:<br />
<br />
# loadkeys ''de-latin1''<br />
# setfont Lat2-Terminus16<br />
<br />
To make them available after reboot, edit {{ic|vconsole.conf}}:<br />
<br />
{{hc|# nano /etc/vconsole.conf|2=<br />
KEYMAP=de-latin1<br />
FONT=Lat2-Terminus16<br />
}}<br />
<br />
* {{ic|KEYMAP}} – Please note that this setting is only valid for your TTYs, not any graphical window managers or Xorg.<br />
<br />
* {{ic|FONT}} – Available alternate console fonts reside in {{ic|/usr/share/kbd/consolefonts/}}. The default (blank) is safe, but some foreign characters may show up as white squares or as other symbols. It's recommended that you change it to {{ic|Lat2-Terminus16}}, because according to {{ic|/usr/share/kbd/consolefonts/README.Lat2-Terminus16}}, it claims to support "about 110 language sets".<br />
<br />
* Possible option {{ic|FONT_MAP}} – Defines the console map to load at boot. Read {{ic|man setfont}}. Removing it or leaving it blank is safe.<br />
<br />
See [[Fonts#Console_fonts|Console fonts]] and {{ic|man vconsole.conf}} for more information.<br />
<br />
==== Time zone ====<br />
<br />
Available time zones and subzones can be found in the {{ic|/usr/share/zoneinfo/<Zone>/<SubZone>}} directories.<br />
<br />
To view the available <Zone>, check the directory {{ic|/usr/share/zoneinfo/}}:<br />
<br />
# ls /usr/share/zoneinfo/<br />
<br />
Similarly, you can check the contents of directories belonging to a <SubZone>:<br />
<br />
# ls /usr/share/zoneinfo/Europe<br />
<br />
Create a symbolic link {{ic|/etc/localtime}} to your zone file {{ic|/usr/share/zoneinfo/<Zone>/<SubZone>}} using this command:<br />
<br />
# ln -s /usr/share/zoneinfo/<Zone>/<SubZone> /etc/localtime<br />
<br />
'''Example:'''<br />
<br />
# ln -s /usr/share/zoneinfo/Europe/Minsk /etc/localtime<br />
<br />
==== Hardware clock ====<br />
<br />
Set the hardware clock mode uniformly between your operating systems. Otherwise, they may overwrite the hardware clock and cause time shifts.<br />
<br />
You can generate {{ic|/etc/adjtime}} automatically by using one of the following commands:<br />
<br />
* '''UTC''' (recommended)<br />
<br />
: {{Note|Using [[Wikipedia:Coordinated Universal Time|UTC]] for the hardware clock does not mean that software will display time in UTC.}}<br />
<br />
: {{bc|# hwclock --systohc --utc}}<br />
<br />
To synchronize your "UTC" time over the internet, see [[Network Time Protocol daemon|NTPd]].<br />
<br />
* '''localtime''' (discouraged; used by default in Windows)<br />
<br />
: {{Warning|Using ''localtime'' may lead to several known and unfixable bugs. However, there are no plans to drop support for ''localtime''.}}<br />
<br />
: {{bc|# hwclock --systohc --localtime}}<br />
<br />
If you have (or planning on having) a dual boot setup with Windows:<br />
<br />
* Recommended: Set both Arch Linux and Windows to use UTC. A quick [[Time#UTC in Windows|registry fix]] is needed. Also, be sure to prevent Windows from synchronizing the time on-line, because the hardware clock will default back to ''localtime''. <br />
<br />
* Not recommended: Set Arch Linux to ''localtime'' and disable any time-related services, like [[Network Time Protocol daemon|NTPd]] . This will let Windows take care of hardware clock corrections and you will need to remember to boot into Windows at least two times a year (in Spring and Autumn) when [[Wikipedia:Daylight saving time|DST]] kicks in. So please don't ask on the forums why the clock is one hour behind or ahead if you usually go for days or weeks without booting into Windows.<br />
<br />
==== Kernel modules ====<br />
<br />
{{Tip|This is just an example, you do not need to set it. All needed modules are automatically loaded by udev, so you will rarely need to add something here. Only add modules that you know are missing.}}<br />
<br />
For kernel modules to load during boot, place a {{ic|*.conf}} file in {{ic|/etc/modules-load.d/}}, with a name based on the program that uses them.<br />
<br />
{{hc|# nano /etc/modules-load.d/virtio-net.conf|<br />
# Load 'virtio-net.ko' at boot.<br />
<br />
virtio-net}}<br />
<br />
If there are more modules to load per {{ic|*.conf}}, the module names can be separated by newlines. A good example are the [[VirtualBox#Arch Linux guests|VirtualBox Guest Additions]].<br />
<br />
Empty lines and lines starting with {{ic|#}} or {{ic|;}} are ignored.<br />
<br />
==== Hostname ====<br />
<br />
Set the [[Wikipedia:hostname|hostname]] to your liking (e.g. ''arch''):<br />
<br />
# echo ''myhostname'' > /etc/hostname<br />
<br />
{{Note|You no longer need to edit {{ic|/etc/hosts}}. The {{Pkg|nss-myhostname}} package will provide host name resolution, and is installed on all systems by default.}}<br />
<br />
=== Configure the network ===<br />
<br />
You need to configure the network again, but this time for your newly installed environment. The procedure and prerequisites are very similar to the one described [[#Establish an internet connection|above]], except we are going to make it persistent and automatically run at boot.<br />
<br />
{{Note|For more in-depth information on network configration, visit [[Configuring Network]] and [[Wireless Setup]].}}<br />
<br />
==== Wired ====<br />
<br />
; Dynamic IP<br />
<br />
If you only use a single fixed wired network connection, you do not need a network management service and can simply enable the {{ic|dhcpcd}} service:<br />
<br />
# systemctl enable dhcpcd@eth0.service<br />
<br />
Alternatively, you can use {{Pkg|netcfg}}'s {{ic|net-auto-wired}}, which gracefully handles dynamic connections to new networks:<br />
<br />
Install {{Pkg|ifplugd}}, which is required for {{ic|net-auto-wired}}:<br />
<br />
# pacman -S ifplugd<br />
<br />
Set up the dhcp profile and enable the {{ic|net-auto-wired}} service:<br />
<br />
# cd /etc/network.d<br />
# ln -s examples/ethernet-dhcp .<br />
# systemctl enable net-auto-wired.service<br />
<br />
; Static IP<br />
<br />
Install {{Pkg|ifplugd}}, which is required for {{ic|net-auto-wired}}:<br />
<br />
# pacman -S ifplugd<br />
<br />
Copy a sample profile from {{ic|/etc/network.d/examples}} to {{ic|/etc/network.d}}:<br />
<br />
# cd /etc/network.d<br />
# cp examples/ethernet-static .<br />
<br />
Edit the profile as needed:<br />
<br />
# nano ethernet-static<br />
<br />
Enable the {{ic|net-auto-wired}} service:<br />
<br />
# systemctl enable net-auto-wired.service<br />
<br />
==== Wireless ====<br />
<br />
You will need to install additional programs to be able to configure and manage wireless network profiles for [[netcfg]].<br />
<br />
[[NetworkManager]] and [[Wicd]] are other popular alternatives.<br />
<br />
* Install the required packages:<br />
<br />
# pacman -S wireless_tools wpa_supplicant wpa_actiond dialog<br />
<br />
If your wireless adapter requires a firmware (as described in the above [[#Wireless|Establish an internet connection]] section and also [[Wireless Setup#Drivers and firmware|here]]), install the package containing your firmware. For example:<br />
<br />
# pacman -S zd1211-firmware<br />
<br />
* Connect to the network with {{ic|wifi-menu}} (optionally checking the interface name with {{ic|ip link}}, but usually it's {{ic|wlan0}}), which will generate a profile file in {{ic|/etc/network.d}} named after the SSID. There are also templates available in {{ic|/etc/network.d/examples/}} for manual configuration.<br />
<br />
# wifi-menu<br />
<br />
* Enable the {{ic|net-auto-wireless}} service, which will connect to known networks and gracefully handle roaming and disconnects:<br />
<br />
# systemctl enable net-auto-wireless.service<br />
<br />
{{Note|[[Netcfg]] also provides {{ic|net-auto-wired}}, which can be used in conjunction with {{ic|net-auto-wireless}}.}}<br />
<br />
* Make sure that the correct wireless interface (usually {{ic|wlan0}}) is set in {{ic|/etc/conf.d/netcfg}}:<br />
<br />
{{hc|# nano /etc/conf.d/netcfg|2=<br />
WIRELESS_INTERFACE="wlan0"}}<br />
<br />
It is also possible to define a list of network profiles that should be automatically connected, using the {{ic|AUTO_PROFILES}} variable in {{ic|/etc/conf.d/netcfg}}. If {{ic|AUTO_PROFILES}} is not set, all known wireless networks will be tried.<br />
<br />
==== xDSL (PPPoE), analog modem or ISDN ====<br />
<br />
For xDSL, dial-up and ISDN connections, see [[Direct Modem Connection]].<br />
<br />
=== Configure pacman ===<br />
<br />
Pacman is the Arch Linux '''pac'''kage '''man'''ager. It is highly recommended to study and learn how to use it. Read {{ic|man pacman}}, have a look at the [[pacman]] article, or check out the [[Pacman Rosetta]] article for a comparison to other popular package managers.<br />
<br />
For repository selections and pacman options, edit {{ic|pacman.conf}}:<br />
# nano /etc/pacman.conf<br />
<br />
Most people will want to use {{ic|[core]}}, {{ic|[extra]}} and {{ic|[community]}}.<br />
<br />
If you installed Arch Linux x86_64, it's recommended that you enable the {{ic|[multilib]}} repository, as well (to be able to run both 32 bit and 64 bit applications):<br />
<br />
{{Note|When choosing repos, be sure to uncomment both the {{ic|[''repo_name'']}} header lines, as well as the lines below. Failure to do so will result in the selected repository being omitted! This is a very common error. A correct example for the multilib repository is found below.}}<br />
<br />
[multilib]<br />
SigLevel = PackageRequired<br />
Include = /etc/pacman.d/mirrorlist<br />
<br />
You will then need to update the package list by running {{ic|pacman}} with the {{ic|-Sy}} switch. Failing to do so will generate "warning: database file for 'multilib' does not exist" error when next using pacman.<br />
<br />
See [[Official Repositories]] for more information, including details about the purpose of each repository.<br />
<br />
For software unavailable directly through pacman, see [[Arch User Repository]].<br />
<br />
=== Create an initial ramdisk environment ===<br />
<br />
{{Tip|Most users can skip this step and use the defaults provided in {{ic|mkinitcpio.conf}}. The initramfs image (from the {{ic|/boot}} folder) has already been generated based on this file when the {{Pkg|linux}} package (the Linux kernel) was installed earlier with {{ic|pacstrap}}.}}<br />
<br />
Here you need to set the right [[Mkinitcpio#HOOKS|hooks]] if the root is on a USB drive, if you use RAID, LVM, or if {{ic|/usr}} is on a separate partition.<br />
<br />
Edit {{ic|/etc/mkinitcpio.conf}} as needed and re-generate the initramfs image with:<br />
<br />
# mkinitcpio -p linux<br />
<br />
{{Note|Arch VPS installations on QEMU (e.g. when using {{ic|virt-manager}}) may need {{ic|virtio}} modules in {{ic|mkinitcpio.conf}} to be able to boot.<br />
<br />
{{hc|# nano /etc/mkinitcpio.conf|2=<br />
MODULES="virtio virtio_blk virtio_pci virtio_net"}}}}<br />
<br />
=== Set the root password and add a regular user ===<br />
<br />
Set the root password with:<br />
<br />
# passwd<br />
<br />
{{Warning|Linux is a multi-user operating system. You should not perform everyday tasks using the root account. It is considered a very poor practice and could be extremely dangerous. The root account should only be used for administrative tasks.}}<br />
<br />
Then add a normal user account. For a more interactive way, you can use {{ic|adduser}}. However, below is the non-interactive way. The user ''archie'' is just an example.<br />
<br />
# useradd -m -g users -G wheel -s /bin/bash ''archie''<br />
# passwd ''archie''<br />
<br />
If you wish to start over, use {{ic|userdel}}. The {{ic|-r}} option will remove the user's home directory and its content, along with the user's settings (the so-called "dot" files).<br />
<br />
# userdel -r ''archie''<br />
<br />
For more information, read [[Users and Groups]].<br />
<br />
=== Install and configure a bootloader ===<br />
<br />
==== For BIOS motherboards ====<br />
<br />
For BIOS systems, there are three bootloaders - Syslinux, GRUB, and [[LILO]]. Choose the bootloader as per your convenience. Below only Syslinux and GRUB are explained. <br />
<br />
* Syslinux is (currently) limited to loading only files from the partition where it was installed. Its configuration file is considered to be easier to understand. An example configuration can be found [https://bbs.archlinux.org/viewtopic.php?pid=1109328#p1109328 here].<br />
<br />
* GRUB is more feature-rich and supports more complex scenarios. Its configuration file(s) is more similar to a scripting language, which may be difficult for beginners to manually write. It is recommended that they automatically generate one.<br />
<br />
{{Note|Some BIOS systems may have issues with GPT. See http://mjg59.dreamwidth.org/8035.html and http://rodsbooks.com/gdisk/bios.html for more info and possible workarounds.}}<br />
<br />
===== Syslinux =====<br />
<br />
Install the {{Pkg|syslinux}} package and then use the {{ic|syslinux-install_update}} script to automatically ''install'' the files ({{ic|-i}}), mark the partition ''active'' by setting the boot flag ({{ic|-a}}), and install the ''MBR'' boot code ({{ic|-m}}):<br />
<br />
{{Note|If you have partitioned the drive as GPT, install {{Pkg|gptfdisk}} package, as well ({{ic|pacman -S gptfdisk}}), because it contains {{ic|sgdisk}}, which will be used to set the GPT-specific boot flag.}}<br />
<br />
# pacman -S syslinux<br />
# syslinux-install_update -i -a -m<br />
<br />
Configure {{ic|syslinux.cfg}} to point to the right root partition. This step is vital. If it points to the wrong partition, Arch Linux will not boot. Change {{ic|/dev/sda3}} to reflect your root partition ''(if you partitioned your drive as in [[#Prepare the storage drive|the example]], your root partition is sda1)''. Do the same for the fallback entry.<br />
<br />
{{hc|# nano /boot/syslinux/syslinux.cfg|2=<br />
...<br />
LABEL arch<br />
...<br />
APPEND root=/dev/sda3 ro<br />
...}}<br />
<br />
For more information on configuring and using Syslinux, see [[Syslinux]].<br />
<br />
===== GRUB =====<br />
<br />
Install the {{Pkg|grub-bios}} package and then run {{ic|grub-install}}:<br />
<br />
{{Note|Change {{ic|/dev/sda}} to reflect the drive you installed Arch on. Do not append a partition number (do not use {{ic|sda''X''}}).}}<br />
<br />
{{Note|For GPT-partitioned drives on BIOS motherboards, GRUB needs a 2 MiB "[[GRUB#GPT specific instructions|BIOS Boot Partition]]".}}<br />
<br />
# pacman -S grub-bios<br />
# grub-install --target=i386-pc --recheck /dev/sda<br />
# cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo<br />
<br />
While using a manually created {{ic|grub.cfg}} is absolutely fine, it's recommended that beginners automatically generate one:<br />
<br />
{{Tip|To automatically search for other operating systems on your computer, install {{Pkg|os-prober}} ({{ic|pacman -S os-prober}}) before running the next command.}}<br />
<br />
# grub-mkconfig -o /boot/grub/grub.cfg<br />
<br />
For more information on configuring and using GRUB, see [[GRUB]].<br />
<br />
==== For UEFI motherboards ====<br />
<br />
For UEFI boot, the drive needs to be GPT-partitioned, and a UEFI System Partition (512 MiB or higher, FAT32, type {{ic|EF00}}) must be present and mounted on {{ic|/boot/efi}}. If you have followed this guide from the beginning, you've already done all of these.<br />
<br />
While there are other [[UEFI Bootloaders|UEFI bootloaders]] available, using EFISTUB is recommended. Below are instructions for setting up EFISTUB and GRUB.<br />
<br />
{{Note|Syslinux does not yet support UEFI.}}<br />
<br />
===== EFISTUB =====<br />
<br />
The Linux kernel can act as its own bootloader using EFISTUB. This is the UEFI boot method recommended by developers and simpler compared to {{ic|grub-efi-x86_64}}. The below steps set up rEFInd (a fork of rEFIt) to provide a menu for EFISTUB kernels, as well as for booting other UEFI bootloaders. You can also use [[UEFI Bootloaders#Using gummiboot|gummiboot]] instead of rEFInd. Both rEFInd and gummiboot can detect Windows UEFI bootloader in case of dual-boot.<br />
<br />
1. Boot in UEFI mode and load {{ic|efivars}} kernel module before chrooting:<br />
<br />
# modprobe efivars # before chrooting<br />
<br />
2. Mount the UEFISYS partition at {{ic|/mnt/boot/efi}}, chroot and [[UEFI_Bootloaders#Setting_up_EFISTUB|copy the kernel and initramfs files]] as described below.<br />
<br />
* Create {{ic|/boot/efi/EFI/arch/}} directory.<br />
<br />
* Copy {{ic|/boot/vmlinuz-linux}} to {{ic|/boot/efi/EFI/arch/vmlinuz-arch.efi}}. The {{ic|.efi}} file extension is very important as some UEFI firmwares refuse to launch a file without this extension. '''Important:''' Remember that the file is called vmlinu'''z''', but not vmlinu'''x'''.<br />
<br />
* Copy {{ic|/boot/initramfs-linux.img}} to {{ic|/boot/efi/EFI/arch/initramfs-arch.img}}.<br />
<br />
* Copy {{ic|/boot/initramfs-linux-fallback.img}} to {{ic|/boot/efi/EFI/arch/initramfs-arch-fallback.img}}.<br />
<br />
Every time the kernel and initramfs files are updated in {{ic|/boot}}, they need to be updated in {{ic|/boot/efi/EFI/arch}}. This can be automated either [[UEFI Bootloaders#Sync EFISTUB Kernel in UEFISYS partition using Systemd|using systemd]] or [[UEFI Bootloaders#Sync EFISTUB Kernel in UEFISYS partition using Incron|using incron]] (for non-systemd setups).<br />
<br />
3. In this guide you set up a bootloader GUI called rEFInd. Alternative bootloaders can be found on the page [[UEFI Bootloaders#Booting EFISTUB]].<br />
For the recommended rEFInd bootloader install the following packages:<br />
# pacman -S refind-efi efibootmgr<br />
<br />
4. Install rEFInd to the UEFISYS partition (summarized from [[UEFI Bootloaders#Using rEFInd]]):<br />
<br />
# mkdir -p /boot/efi/EFI/refind<br />
# cp /usr/lib/refind/refindx64.efi /boot/efi/EFI/refind/refindx64.efi<br />
# cp /usr/lib/refind/config/refind.conf /boot/efi/EFI/refind/refind.conf<br />
# cp -r /usr/share/refind/icons /boot/efi/EFI/refind/icons<br />
<br />
5. Create a {{ic|refind_linux.conf}} file with the kernel parameters to be used by rEFInd:<br />
<br />
{{hc|# nano /boot/efi/EFI/arch/refind_linux.conf|2=<br />
"Boot to X" "root=/dev/sdaX ro rootfstype=ext4 systemd.unit=graphical.target"<br />
"Boot to console" "root=/dev/sdaX ro rootfstype=ext4 systemd.unit=multi-user.target"}}<br />
<br />
{{Note|{{ic|refind_linux.conf}} is copied in the directory {{ic|/boot/efi/EFI/arch/}} where the initramfs and the kernel have been copied to in step 2. }}<br />
{{Note| In {{ic|refind_linux.conf}}, sdaX refers to your root file system, not your boot partition, if you created them separately. }}<br />
<br />
6. Add rEFInd to UEFI boot menu using [[UEFI#efibootmgr|efibootmgr]]. <br />
<br />
{{Warning|Using {{ic|efibootmgr}} on Apple Macs may brick the firmware and may need reflash of the motherboard ROM. For Macs, use {{AUR|mactel-boot}}, or "bless" from within Mac OS X.}}<br />
<br />
# efibootmgr -c -g -d /dev/sdX -p Y -w -L "rEFInd" -l '\EFI\refind\refindx64.efi'<br />
<br />
{{Note|In the above command, X and Y denote the drive and partition of the UEFISYS partition. For example, in {{ic|/dev/sdc5}}, X is "c" and Y is "5".}}<br />
<br />
7. (Optional) As a fallback, in case {{ic|efibootmgr}} created boot entry does not work, copy {{ic|refindx64.efi}} to {{ic|/boot/efi/EFI/boot/bootx64.efi}} as follows:<br />
<br />
# cp -r /boot/efi/EFI/refind/* /boot/efi/EFI/boot/<br />
# mv /boot/efi/EFI/boot/refindx64.efi /boot/efi/EFI/boot/bootx64.efi<br />
<br />
===== GRUB =====<br />
<br />
{{Note|In case you have a system with 32-bit EFI, like pre-2008 Macs, install {{ic|grub-efi-i386}} instead, and use {{ic|1=--target=i386-efi}}.}}<br />
<br />
# pacman -S grub-efi-x86_64 efibootmgr<br />
# grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=arch_grub --recheck<br />
# cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo<br />
<br />
The next command creates a menu entry for GRUB in the UEFI boot menu. However, as of {{Pkg|grub-efi-x86_64}} version 2.00, {{ic|grub-install}} tries to create a menu entry, so running {{ic|efibootmgr}} may not be necessary. See [[UEFI#efibootmgr]] for more info.<br />
<br />
# efibootmgr -c -g -d /dev/sdX -p Y -w -L "Arch Linux (GRUB)" -l '\EFI\arch_grub\grubx64.efi'<br />
<br />
Next, while using a manually created {{ic|grub.cfg}} is absolutely fine, it's recommended that beginners automatically generate one:<br />
<br />
{{Tip|To automatically search for other operating systems on your computer, install {{Pkg|os-prober}} ({{ic|pacman -S os-prober}}) before running the next command.}}<br />
<br />
# grub-mkconfig -o /boot/grub/grub.cfg<br />
<br />
For more information on configuring and using GRUB, see [[GRUB]].<br />
<br />
=== Unmount the partitions and reboot ===<br />
<br />
Exit from the chroot environment:<br />
<br />
# exit<br />
<br />
Since the partitions are mounted under {{ic|/mnt}}, we use the following command to unmount them:<br />
<br />
# umount /mnt/{boot,home,}<br />
<br />
Reboot the computer:<br />
<br />
# reboot<br />
<br />
{{Tip|Be sure to remove the installation media, otherwise you will boot back into it.}}<noinclude><br />
{{Beginners' Guide navigation}}</noinclude></div>Wlmeng11