Cube KNote i1101
| Device | Status | Modules |
| Display | Working | xf86-video-intel |
| Touchscreen | Working,with firmware mssl1680-firmwareAUR | silead_ts |
| Wireless | Working | iwlwifi |
| Audio | Working | alc269 |
| Touchpad | Working | |
| Battery Status | Working | |
| Camera | Not working | |
| Bluetooth | Working | btintel |
| MicroSD Reader | Working | |
| Power Management | Seems work fine | |
| Accelerometer | Working, with custom build kernel | bma150_accel_i2c |
| Hardware Buttons | Working | |
| Lid/Keyboard | Working |
Cube KNote i1101 is a 11-inch tablet with Apollo Lake(Celeron N3450) and 6GB RAM. It also comes with a FHD (1920x1080) resolusion screen.
Contents
Installation and configuration
Most devices should work out-of-box after a standard installation, some devices need extra configuration.
Sound
No sound
You need to add yourself to audio group.
3.5mm jack not recognized
Add following lines to /etc/modprobe.d/50-sound.conf
alias snd-card-0 snd-hda-intel alias sound-slot-0 snd-hda-intel
Accelerometer
You need to build kernel manually to enable bmc150_accel_i2c IIO driver, and install iio-sensor-proxyAUR if you use a desktop environment.
The DSDT data gives a faulty ACCEL_MOUNT_MATRIX data, so create the following file in /etc/udev/hwdb.d/61-sensor-local.hwdb with the following contents:
sensor:modalias:acpi:BOSC0200*:dmi:*:svnALLDOCUBE:pni1101:* ACCEL_MOUNT_MATRIX=1, 0, 0; 0, -1, 0; 0, 0, -1
Reboot and accelerometer works. However, it will fail after sleep and wake up, which considered as a driver bug.