Network Time Protocol daemon

来自 Arch Linux 中文维基

Network Time Protocol (网络时间协议)是 GNU/Linux 系统通过互联网时间服务器同步系统软件时钟的最常见方法。设计时考虑到了各种网络延迟,通过公共网络同步时,误差可以降低到10毫秒以内;通过本地网络同步时,误差可以降低到 1 毫秒。

NTP 项目提供了一个名为简单 NTP 的参考实现。本文介绍如何设置和运行服务器和客户端 NTP 进程。

安装[编辑 | 编辑源代码]

安装 ntp 软件包。如果不做任何配置, ntpd 默认工作于客户端模式。如果使用 Arch Linux 默认的配置,请跳转到 #使用。作为服务器的配置,请参阅 #NTP 服务器模式

配置[编辑 | 编辑源代码]

主要的后台进程是 ntpd, 可以通过 /etc/ntp.conf 配置。详细信息可以参考手册 ntp.conf(5) 和相关的 man {ntpd|ntp_auth|ntp_mon|ntp_acc|ntp_clock|ntp_misc}.

连接到 NTP 服务器[编辑 | 编辑源代码]

NTP 服务器通过一个层级系统进行分类,不同的层级称为 strata;独立的时间源为stratum 0;直接连接到 stratum 0 的设备为 stratum 1;直接连接到 stratum 1 的源为 stratum 2,以此类推。

服务器的 stratum 并不能完全等同于它的精度和可靠度。通常的时间同步都使用 stratum 2 服务器。通过pool.ntp.org 服务器或这个链接 可以选择比较近的服务器池。

下面几行仅仅是例子:

/etc/ntp.conf
server 0.fr.pool.ntp.org iburst
server 1.fr.pool.ntp.org iburst
server 2.fr.pool.ntp.org iburst
server 3.fr.pool.ntp.org iburst

推荐使用iburst选项,如果第一次尝试无法建立连接,程序会发送一系列的包。burst 选项则总是发送一系列的包,即使第一次也是这样。如果没有明确的允许的话不要使用 burst 选项,有可能被封禁。

NTP 服务器模式[编辑 | 编辑源代码]

如果建立一个 NTP 服务器,你需要添加 local clock 作为一个服务器,这样,即便它失去网络连接,它也可以继续为网络提供服务;添加 local clock 作为一个 stratum 10 服务器 (使用 fudge 命令)这样它就只会在失去连接时使用本地时钟:

server 127.127.1.0
fudge  127.127.1.0 stratum 10

下一步,定义规则允许客户端连接你的服务(localhost 也被认为是一个客户端)。使用 restrict 命令;你应该在文件中已经有一行:

restrict default nomodify nopeer noquery

这限制了每个人做任何修改并阻止每个人请求你的时间服务器状态:nomodify 防止重新配置你的ntpd(使用ntpqntpdc ),noquery 防止从你的nptd(或是ntpqntpdc)获取状态数据。

你也能添加其它选项:

restrict default kod nomodify notrap nopeer noquery
注意: 这会允许其他人查询你的时间服务器。你需要添加 noserve 来停止提供时间。

"restrict"选项的完整文档可以从 ntp.conf(5) 中查找到。详见 https://support.ntp.org/bin/view/Support/AccessRestrictions

你需要在这一行之后告诉 ntpd 什么可以访问你的服务器;如果你不是在配置一台 NTP 服务器的话,下面一行就足够了。

restrict 127.0.0.1

如果你想要强制DNS解析到IPv6域名,在IP地址或域名前写上 -6-4 则强制使用IPv4域名),例如:

restrict -6 default kod nomodify notrap nopeer noquery
restrict -6 ::1    # ::1 is the IPv6 equivalent for 127.0.0.1

最后,指定drift文件(它能时刻监控你的时钟的时间漂移)和log文件的位置:

driftfile /var/lib/ntp/ntp.drift
logfile /var/log/ntp.log

一份基础的配置文件是这样的:

/etc/ntp.conf
server 0.pool.ntp.org iburst
server 1.pool.ntp.org iburst
server 2.pool.ntp.org iburst
server 3.pool.ntp.org iburst

restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery

restrict 127.0.0.1
restrict -6 ::1  

driftfile /var/lib/ntp/ntp.drift
logfile /var/log/ntp.log
注意: 定义日志文件不是必须的,但是它对于反馈 ntpd 操作是有好处的。

使用[编辑 | 编辑源代码]

软件包默认包含客户端模式的配置,并且使用单独的用户和群组,启动时就会移除 root 权限。如果在终端中启动,请使用 -u 选项:

# ntpd -u ntp:ntp

systemd 服务默认使用 -u 选项和 -g 选项禁用一个阈值(panic-gate). 这样即使 ntp-server 的时间和系统时间的差异超过阈值,依然会同步时间。

警告: 使用 panic-gate 的原因是某些后台任务或服务会引起时间跳跃. 如果系统的时间从来没有同步过,请考虑先禁用其他服务再进行同步。

两个服务都依赖系统网络状况,会在检测到网络连接时开始同步。

启动时启用 ntpd[编辑 | 编辑源代码]

启用 ntpd.service 服务.

注意: systemd 命令 timedatectl 仅可以控制 systemd-timesyncd, 用 root 执行 timedatectl set-ntp 1 会停止运行中的 ntpd.service.[1]

ntpq 可以查看同步的状态:

$ ntpq -p

delay, offset 和 jitter 不应该为零,ntpd 同步的服务器前有星号,ntpd 可能等待很多分钟后才会进行同步,请等 17 分钟 (1024 秒).

每次启动同步一次[编辑 | 编辑源代码]

另一种方式是 启用 ntpdate.service 服务,每次启动都同步一次(-q) 并且是 non-forking (-n), 进程不会在后台运行。如果是服务器或者很多天才会重启一次,不建议使用此方式。

如果需要把同步到的时间写入硬件时钟,请按照 这里 的说明修改服务并启动:

/etc/systemd/system/ntpdate.service.d/hwclock.conf
[Service]
ExecStart=/usr/bin/hwclock -w

技巧[编辑 | 编辑源代码]

有网络连接的时候启动ntpd[编辑 | 编辑源代码]

ntpd 可以由你的网络管理器启动, 所以ntp这个守护进程只有在计算机有网络连接的时候才会启动.

Netctl

本文或本节需要翻译。要贡献翻译,请访问简体中文翻译团队

附注: 英文页面风格不好。添加 -u 参数以及“使用”中提及的可选参数,或尽可能使用 systemctl 。(在 Talk:Network Time Protocol daemon# 中讨论)

给你的 netctl 配置文件添加如下这几行:

ExecUpPost='/usr/bin/ntpd || true'
ExecDownPre='killall ntpd || true'
NetworkManager

通过网络管理器的 dispatcher 脚本,可以同网络连接一起启动/终止ntpd 守护进程。 安装networkmanager-dispatcher-ntpdAUR 预配置包 #启动时启用 ntpd 来让网络连接同步ntp启动/终止.

KDE

在KDE中,通过右击时间图标选择 Adjust date/time,可以使用 NTP (别忘了安装NTP)。 注意, 在配置KDE中配置NTP之前,先要把 ntp 守护进程设置为  disabled 状态. [2]

在GPS中使用NTP[编辑 | 编辑源代码]

大多数联网的交通工具要通过(共享内存) 方式让 ntpd 从GPS中接收时间。 但是, 从 ntpd 4.2.8版本开始,一个 更好 的办法出现了----直接与 gpsd守护进程交互。这个要先安装 gpsd .

/etc/ntp.conf 配置文件中添加下面这几行:

/etc/ntp.conf
#=========================================================
#  GPSD native ntpd driver
#=========================================================
# This driver exists from at least ntp version 4.2.8
# Details at
#   https://www.eecis.udel.edu/~mills/ntp/html/drivers/driver46.html
server 127.127.46.0 
fudge 127.127.46.0 time1 0.0 time2 0.0 refid GPS

只要 gpsd 一直起着,ntp就会一直正常运行。 ntp会通过一个本地套接字同 gpsd 连接, 搜索 gpsd 返回的 "gpsd_json" 对象.

要检验安装的话, 首先要检查 gpsd 是不是正常运行:

 $ cgps -s 

然后等个几分钟运行 ntpq -p. 这个会显示 ntpd 是否已经跟 gpsd 建立连接了:

$ ntpq -p
remote           refid            st t when poll reach   delay   offset  jitter
 ==================================================================================
*GPSD_JSON(0)    .GPS.            0 l   55   64  377    0.000    2.556  14.109
提示:如果 reach 这列是0的话, 这就说明 ntpd 还没有同 gpsd 建立连接。 等几分钟再试一次。 有时 ntpd 要花点时间来跟gpsd 建立连接。

在 chroot 底下运行[编辑 | 编辑源代码]

注意: 在试图把 ntpd 放到chroot目录下面之前,ntpd 应该在正常路径下启动 (默认在 Arch Linux 安装路径下)。 因为在相对以root身份运行的进程,chroots的用户相对没有啥权限的。

创建一个新目录(如果还没创建的话) /etc/systemd/system/ntpd.service.d/,并添加在里面添加文件 customexec.conf ,内容如下:

[Service]
ExecStart=
ExecStart=/usr/bin/ntpd -g -i /var/lib/ntp -u ntp:ntp -p /run/ntpd.pid

然后, 编辑 /etc/ntp.conf 来改变 driftfile 路径来让跟它跟 chroot 路径保持一致, 而不是还用原先的普通路径。修改

driftfile       /var/lib/ntp/ntp.drift

driftfile       /ntp.drift

通过root创建永久目录和文件,作为一个合适的 chroot 环境来支持 getaddrinfo() :

# mkdir /var/lib/ntp/etc /var/lib/ntp/lib /var/lib/ntp/proc
# touch /var/lib/ntp/etc/resolv.conf /var/lib/ntp/etc/services

然后通过修改 fstab 绑定前面提到的文件:

/etc/fstab
...
#ntpd chroot mounts
/etc/resolv.conf  /var/lib/ntp/etc/resolv.conf none bind 0 0
/etc/services	  /var/lib/ntp/etc/services none bind 0 0
/lib		  /var/lib/ntp/lib none bind 0 0
/proc		  /var/lib/ntp/proc none bind 0 0
# mount -a

最后, 再一次重启 ntpd 监控进程。 一旦重启完成你就可以通过检查 /proc/{PID}/root 的软连接来判断监控进程是不是在 chrooted 下面工作:

# ps -C ntpd | awk '{print $1}' | sed 1d | while read -r PID; do ls -l /proc/$PID/root; done

正常应该链接到 /var/lib/ntp 而不是 /.

不用等一段时间就要确定 driftfile 配置是否工作正常是比较困难的, 因为 ntpd 不会经常读写。 如果配置错误的话,log里面会打印一个error; 如果配置正确的话, 时间戳会更新的。 可以通过等一天来判断,如果没有log中没有错误打印,并且log的时间戳还更新了,那么说明配置成功了。

排错[编辑 | 编辑源代码]

无法分配请求地址[编辑 | 编辑源代码]

本文或本节需要翻译。要贡献翻译,请访问简体中文翻译团队

附注: 英文章不正。对需要或必须使用 IPv6 的用户而言,此方案不可行。(在 Talk:Network Time Protocol daemon# 中讨论)

如果收到下列无法分配请求地址的报错信息:

$ journalctl -u ntpd
ntpd[2130]: bind(21) AF_INET6 fe80::6ef0:49ff:fe51:4946%2#123 flags 0x11 failed: Cannot assign requested address
ntpd[2130]: unable to create socket on eth0 (5) for fe80::6ef0:49ff:fe51:4946%2#123
ntpd[2130]: failed to init interface for address fe80::6ef0:49ff:fe51:4946%2

可以禁用 IPv6 解决。做法是:编辑 ntpd.service 添加 -4 参数:

[Service]
ExecStart=
ExecStart=/usr/bin/ntpd -g -u ntp:ntp -4

参见[编辑 | 编辑源代码]