User:Firestone
There are many different methods of providing accessibility to users that suffer from a physical or visual handicap. However, unless a DE is used, the configuration might require some tinkering until one gets it right.
Desktop Environments
Most modern Desktop Environments (DE) ship with an extensive set of features, among which one can find a tool to configure the accessibility options with. Generally, these options can be found listed under those of 'accessibility', or under those of the corresponding input device (e.g. 'keyboard' and 'mouse').
Physical Assistance
For speech recognition, see Text to speech.
Operating the Keyboard
For Braille, see Arch Linux for the blind.
Console
Sticky Keys
In order to enable Sticky Keys in a TTY, you require to know the exact keycodes of the keys to be used. These can be found by a tool like xorg-xev or xkeycaps. Alternatively, you can inspect the output of dumpkeys, provided that the current keymap is correct.
For example, a Logitech Ultra-X will provide the following keycodes for the modifier keys :
LCtrl = 29 LShift = 42 LAlt = 56 RShift = 54 RCtrl = 97
Next, use dumpkeys to determine the range of the keycodes :
# dumpkeys | head -1 keymaps 0-63
Continue by creating a new file with a suitable name, e.g. "stickyKeys", and use your favourite editor to combine the previously-found information with the desired key function.
In case of the keycodes found earlier, you would get :
keymaps 0-63 keycode 29 = SCtrl keycode 42 = SShift keycode 56 = SAlt keycode 54 = SShift keycode 97 = SCtrl
Here, the letter "S" in front of a modifier key denotes that we want the sticky version of that key.
Load your new mapping by running the following command :
# loadkeys ./stickyKeys
If you are satisfied by the results, then move the file to a suitable directory, and ensure that it will be loaded on boot either by placing the above command in /etc/rc.local (old method), or by using a systemd service file (preferred method).
In case of systemd, an example service file might look like :
[Unit] Description="load custom keymap (sticky keys)" [Service] Type=oneshot ExecStart=/usr/bin/loadkeys /path/to/stickyKeys StandardInput=tty RemainAfterExit=yes [Install] WantedBy=multi-user.target emergency.target rescue.target
Finally, move this file, e.g. "loadkeys.service", to /usr/lib/systemd/system/ and enable it by running :
# systemdctl enable loadkeys
Independent of Graphical Environment
One method of enabling DE-independent accessibility function is by passing it through X, given that it is build with XKB support. This can be done by setting parameters for the X server, as specified in its man page :
[+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask ] ] ] ]
enables(+) or disables(-) AccessX key sequences (Sticky Keys).
-ardelay milliseconds
sets the autorepeat delay (length of time in milliseconds that
a key must be depressed before autorepeat starts).
-arinterval milliseconds
sets the autorepeat interval (length of time in milliseconds
that should elapse between autorepeat-generated keystrokes).
These parameters must be placed in the file ~/.xserverrc, which you may need to create.
For example, to enable Sticky Keys without timeout and without audible or visible feedback, the following can be used :
if [ -z "$XDG_VTNR" ]; then exec /usr/bin/X -nolisten tcp "$@" +accessx 0 0x1e 0 0xcef else exec /usr/bin/X -nolisten tcp "$@" vt$XDG_VTNR +accessx 0 0x1e 0 0xcef fi
Note that once X has started, e.g. by executing startx, it still requires you to press the shift key 5 times to enable Sticky Keys. Unfortunately, this is needed each time X starts. Alternatively, a script can be used to automate this process.
Similar to most implementations, Sticky Keys can be disabled by pressing a modifier key and any other key at the same time.
Operating the Mouse
Independent of Graphical Environment
Button Mapping
By using xmodmap, you can map functions to mouse buttons independent of your graphical environment. For this, you need to know which physical button on your mouse is read as which number, which can be found by a tool such as xorg-xev. Generally, the physical buttons of left, middle, and right are read as the first, second, and third button, respectively.
Once you have acquired these, continue by creating a configuration file on a suitable location, e.g. ~/.mousekeys. Next, open the file with your favourite editor, and write the keyword pointer = followed by an enumeration of the previously-found number of mouse buttons.
For example, a three button mouse with a scroll wheel is able to provide five physical actions: left, middle, and right click, as well as scroll up and scroll down. This can be mapped to the same functions by using the following line in the configuration file :
pointer = 1 2 3 4 5
Here, the location will tell the action required to perform an internal mouse-button function. For example, a mapping for left-handed people (left- and right button switched) might look like
pointer = 3 2 1 4 5
When you are done, you can test and inspect your mapping by running xmodmap :
$ xmodmap ~/.mousekeys $ xmodmap -pp
Once satisfied, you can enable it on start by placing the first line in ~/.xinitrc.
Visual Assistance
As with physical assistance, most modern DEs ship with an extensive set of features to tweak the visual aspects of your system. Generally, these options can be found listed under those of 'accessibility' or 'visual assistance'. Alternatively, useful options might be found in the settings of the individual applications.
Text To Speech
See Text to speech.
Console & Virtual Terminal Emulators
- Contrast...
- Font size...
- Text2Speech...
Issues
- Configuration of input devices is not recognized by software that circumvents the software layer, e.g. wine, virtualbox, and qemu.