Difference between revisions of "ASUS Eee PC"

From ArchWiki
Jump to: navigation, search
(Eee 1015 PE/PEM: added a few sections and spiffed a few things up)
m (Eee 1015B: suspend-to-RAM)
(10 intermediate revisions by 7 users not shown)
Line 1: Line 1:
 
[[Category:ASUS]]
 
[[Category:ASUS]]
 +
[[de:Asus Eee PC]]
 
This should be the page to gather all information on installing and running arch on the Asus Eee.  
 
This should be the page to gather all information on installing and running arch on the Asus Eee.  
 
Why? Because the 'old' page is a bit confusing/outdated, wrongly named (makes finding it in a search hard) and the title limits it to just the install precedure.
 
Why? Because the 'old' page is a bit confusing/outdated, wrongly named (makes finding it in a search hard) and the title limits it to just the install precedure.
Line 200: Line 201:
 
* Graphics (with kms and dri2, using the xf86-video-ati driver)
 
* Graphics (with kms and dri2, using the xf86-video-ati driver)
 
* Webcam (using v4l)
 
* Webcam (using v4l)
* Suspend-to-RAM (after installing acpid; maybe need to replace SLPB with SBTN in ''/etc/acpi/handler.sh'')
+
* Suspend-to-RAM (after installing acpid)
 
* Cardreader (but keucr is in staging, thus '''taints the kernel'''. PyroPeter experienced '''crashes''' while he inserted or removed sd cards)
 
* Cardreader (but keucr is in staging, thus '''taints the kernel'''. PyroPeter experienced '''crashes''' while he inserted or removed sd cards)
 
* Bluetooth (after installing bluez)
 
* Bluetooth (after installing bluez)
* CPU Frequency Scaling (manually add ''powernow-k8'' to MODULES array in ''/etc/rc.conf'')
+
* CPU Frequency Scaling (Use acpi_cpufreq since linux 3.7)
 
* TouchPad (support multi-touch after installing xf86-input-synaptics)
 
* TouchPad (support multi-touch after installing xf86-input-synaptics)
 +
* Video Acceleration (Using [[ATI_Catalyst#Video_acceleration|ATI/AMD's propretary driver(catalyst)]])
  
 
''/etc/modprobe.d/eeepc1015b.conf:''
 
''/etc/modprobe.d/eeepc1015b.conf:''
Line 246: Line 248:
 
  01:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
 
  01:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
 
  02:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet (rev c1)
 
  02:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet (rev c1)
or
+
On models with ASMedia USB 3.0 chip, replace last 2 line with:
 
  01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
 
  01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
 
  02:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet (rev c1)
 
  02:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet (rev c1)
Line 257: Line 259:
 
  Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 
  Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 
  Bus 002 Device 002: ID 13d3:5702 IMC Networks UVC VGA Webcam
 
  Bus 002 Device 002: ID 13d3:5702 IMC Networks UVC VGA Webcam
 
acpi_listen:
 
power  ''button button/power PBTN 00000080 00000000''
 
Fn+F1  ''button/sleep SBTN 00000080 00000000''
 
Fn+F2  ''button/wlan WLAN 00000080 00000000''
 
Fn+F3  '' PNP0C14:00 000000d2 00000000''
 
Fn+F4
 
Fn+F5  ''video/brightnessdown BRTDN 00000087 00000000''
 
Fn+F6  ''video/brightnessup BRTUP 00000086 00000000''
 
Fn+F7  ''video/birghtnesszero BZRO 00000088 00000000 K''
 
Fn+F8  ''video/switchmod VMOD 00000080 00000000 K''
 
Fn+F9  ''button/prog1 PROG1 00000080 00000000 K''
 
Fn+F10 ''button/mute MUTE 00000080 00000000 K''
 
Fn+F11 ''button/volumedown VOLDN 00000080 00000000 K''
 
Fn+F12 ''button/volumeup VOLUP 00000080 00000000 K''
 
  
 
== Audio ==
 
== Audio ==
Line 281: Line 268:
 
  defaults.timer.card 1
 
  defaults.timer.card 1
  
Volume function key for alsa: (add following code befor last '''*)''' in ''/etc/apci/handler.sh'')
+
Volume function key for alsa:  
 
+
{{hc|/etc/acpi/handler.sh|
button/mute)
+
......
 +
        open)
 +
            #echo "LID opend!">/dev/tty5
 +
            ;;
 +
    esac
 +
    ;;
 +
## volume control key ##
 +
button/mute)
 
   case "$2" in
 
   case "$2" in
 
     MUTE) amixer set Master toggle ;;
 
     MUTE) amixer set Master toggle ;;
 
   esac
 
   esac
 
   ;;
 
   ;;
button/volumedown)
+
button/volumedown)
 
   case "$2" in
 
   case "$2" in
 
     VOLDN) amixer set Master 2%- ;;
 
     VOLDN) amixer set Master 2%- ;;
 
   esac
 
   esac
 
   ;;
 
   ;;
button/volumeup)
+
button/volumeup)
 
   case "$2" in
 
   case "$2" in
 
     VOLUP) amixer set Master 2%+ ;;
 
     VOLUP) amixer set Master 2%+ ;;
 
   esac
 
   esac
 
   ;;
 
   ;;
 +
## volume control key end ##
 +
*)
 +
  logger "ACPI group/action underfined: $1 /$2"
 +
  ;;
 +
esac}}
 +
 +
== Powersaving ==
 +
 +
When system is idle, [[ATI_Catalyst|ATI/AMD's propretary driver(catalyst)]] saves 2.5W than xf86-video-ati.
 +
 +
= Eee 1015 BX =
 +
 +
Most seems to work 'out-of-the-box':
 +
* Wlan
 +
* Ethernet
 +
* Graphics (using the xf86-video-ati driver)
 +
* Webcam
 +
* Suspend-to-RAM (with acpi & acpid)
 +
* Cardreader
 +
* CPU Frequency Scaling (add 'eeepc-wmi ac battery button fan video' to MODULES array in '/etc/rc.conf')
 +
* TouchPad (using the xf86-input-synaptics driver)
 +
 +
 +
My blacklist:
 +
# /etc/modprobe.d/blacklist.conf
 +
blacklist sp5100_tco
 +
 +
For sound at DE add this file to your HOME-directory:
 +
#
 +
# ~/.asoundrc
 +
#
 +
 +
defaults.ctl.card 1
 +
defaults.pcm.card 1
 +
defaults.timer.card 1
 +
 +
For volume-control-buttons I use shortcuts with:
 +
amixer -q -c 1 set Master 5+
 +
amixer -q -c 1 set Master 5-
 +
amixer -q -c 1 set Master toggle
 +
  
 
= Eee 1015 PE/PEM =
 
= Eee 1015 PE/PEM =
Line 366: Line 401:
  
 
=== ACPI ===
 
=== ACPI ===
 +
 +
ACPI works fine following the [[acpid]] guide. The following is for older versions of the kernel.
  
 
To enable acpi you need to edit menu.lst and add acpi_osi=Linux to the kernel line like so:
 
To enable acpi you need to edit menu.lst and add acpi_osi=Linux to the kernel line like so:
Line 391: Line 428:
 
= Eee 1015 PN =
 
= Eee 1015 PN =
 
[[Asus_EEE_PC_1015pn]]
 
[[Asus_EEE_PC_1015pn]]
 +
 +
= Eee 1025C =
 +
[[Asus_EEE_PC_1025c]]
  
 
= Eee 1201T =
 
= Eee 1201T =

Revision as of 04:48, 4 February 2013

This should be the page to gather all information on installing and running arch on the Asus Eee. Why? Because the 'old' page is a bit confusing/outdated, wrongly named (makes finding it in a search hard) and the title limits it to just the install precedure.

The 'old' page should be cleaned up and merged into this page, and any future information should also go on this page. If no one that actualy owns an Eee want to do it, then I (Mr.Elendig) can do it, but it will take some time.

Until this page actualy get some contents, go to Installing Arch Linux on the Asus EEE PC.

Eee 700 Series and 900

This should be filled with the majority of the content from Installing Arch Linux on the Asus EEE PC.

Installation

Installation can be achieved from an external cdrom drive, or from a usb stick configured as described in Install from USB stick

The wireless module (ath5k) is now part of the stock kernel. The stock kernel performs very well on the eeepc. You do not need to install any extra packages from AUR for wireless or install any special kernel.

During installation make sure you add the following packages in addition to the base packages for wireless to work.

wireless_tools
netcfg

Thats all you now need for a working eee.

If you do want an optimized Pentium-M kernel

toofishes created a repository for the Eee. You can find some basic packages like a Pentium-M optimized kernel. Add

[eee]
Server = http://code.toofishes.net/packages/eee

to your /etc/pacman.conf to use the repository.

Simply use pacman to install the package you need. Install the packages with this command:

# pacman -S kernel-eee

Then, add the following to /boot/grub/menu.lst; note that no initrd is needed:

# (2) Arch Linux
title  Arch Linux EEE kernel
root   (hd0,0)
kernel /boot/vmlinuzeee root=/dev/sda1 ro

Restart and select Arch Linux EEE kernel from the grub boot menu.

Xorg

Xorg works without an xorg.conf on the eeepc fine with the new hotplugging system.

# pacman -S xorg xf86-input-keyboard xf86-input-synaptics xf86-video-intel

start hal

# /etc/rc.d/hal start

and add hal to the daemons line of your /etc/rc.conf file

Sound

If sound does not work in a new installation add the following line to /etc/modprobe.d/modprobe.conf

options snd-hda-intel model=3stack-dig

Eee 900A

The 900A is a 900 with a Intel Atom CPU and new hardware (the most is like in 901), you can get help in Asus Eee PC 900A.

Eee 901, 904, and 1000(H)

The 901, 904, and 1000(H) all seem to share much-of, if not all the same hardware. The steps for setting up Arch Linux are as follows. NB. There is a separate wiki page as well dedicated to the 901.

Setting up the Network

Two PKGBUILD files are available in the AUR to help you get your network interfaces up and running. The first is delcake's "atl1e" drivers for your wired ethernet, and the second is jbooth's "eeert2860" drivers for wireless.

atl1e

delcake's PKGBUILD is located here in the AUR. Note that in order to build this package, you will need to get the unrar and unzip packages from the mirror of you choice, as well as the LinuxDrivers.zip source code linked on the AUR page unless you did your wireless drivers first.

  1. Transfer the PKGBUILD to your Eee PC. Get the source files too if you do not have internet yet.
  2. Install the unrar and unzip packages if you do not already have them.
  3. Issue a 'makepkg' command at the location of the PKGBUILD.

If all goes well, a .pkg.tar.gz file that starts with the name atl1e will have been created in the same folder.

As root, run 'pacman -U <package name>.pkg.tar.gz' to install your newly created module. In order to detect it, run both 'depmod -a' and 'modprobe atl1e' as root in that order.

At this point, you should be able to issue an 'ifconfig -a' command and see your brand new eth0 device staring back at you. Don't forget to add atl1e to your modules list in /etc/rc.conf to automatically load your ethernet module during boot.

  • WARNING: You will need to recompile this module any time you do a kernel upgrade, so hang on to that PKGBUILD and zip file.

eeert2860

jbooth's PKGBUILD is located here in the AUR. Note that in order to build this package, you will need to get the wireless_tools package from the mirror of your choice, as well as Ralink's drivers listed under the sources section unless you did your wired drivers first.

  1. Transfer the PKGBUILD to your Eee PC. Get the source files too if you do not have internet yet.
  2. Install the wireless_tools package if you do not already have it.
  3. Issue a 'makepkg' command at the location of the PKGBUILD.

Hopefully, the makepkg command went through without a hitch, and a .pkg.tar.gz file will have been created in the same folder.

As root, run 'pacman -U <package name>.pkg.tar.gz' to install your newly created module. In order to detect it, run both 'depmod -a' and 'modprobe rt2860sta' as root in that order.

Now you should see your ra0 wireless device in the output of 'ifconfig -a'. As root, run 'ifconfig ra0 up' to bring up the interface for configuration.

  • Still no ra0 device? Make sure that the WLAN device is enabled in your BIOS.
  • WARNING: You will need to recompile this module any time you do a kernel upgrade, so hang on to the PKGBUILD and .tar.bz2 file.

Eee 901 20G lsmod and lspci

Note : This section was moved from the 70x/900 page.

The following are from a stock ASUS EeePC 901 20G Linux version:

lsmod:

Module                  Size  Used by
acpi_cpufreq            5004  0 
freq_table              1988  1 acpi_cpufreq
usb_storage            22980  0 
libusual                6352  1 usb_storage
pciehp                 31172  0 
pci_hotplug             9672  1 pciehp
ehci_hcd               25420  0 
uhci_hcd               18636  0 
usbhid                 13444  0 
usbcore                91992  6 usb_storage,libusual,ehci_hcd,uhci_hcd,usbhid
snd_pcm_oss            33568  0 
snd_mixer_oss          13056  1 snd_pcm_oss
rt2860sta             468248  1 
atl1e                  26388  0 
fuse                   34516  0 
asus_acpi               6560  0 
button                  5648  0 
processor              19820  1 acpi_cpufreq
battery                 7940  0 
ac                      3524  0 
autofs4                15876  0 
sr_mod                 13284  0 
cdrom                  30624  1 sr_mod
snd_hda_intel         284112  0 
snd_pcm                50696  2 snd_pcm_oss,snd_hda_intel
snd_timer              15556  1 snd_pcm
snd_page_alloc          6728  2 snd_hda_intel,snd_pcm
snd_hwdep               6084  1 snd_hda_intel
snd                    34852  6 snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
soundcore               3744  1 snd
genrtc                  6028  0

lspci:

00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Network controller: RaLink RT2790 Wireless 802.11n PCIe
03:00.0 Ethernet controller: Atheros Corp. L1e Gigabit Ethernet Adapter (rev b0)

Eee 904HA

Asus Eee PC 904HA

Eee T91MT

Asus Eee PC T91MT

Eee T101MT

Asus Eee PC T101MT

Eee 1000HA

Asus Eee PC 1000HA

Eee 1000HE

Asus Eee PC 1000HE

Eee 1001P

Asus Eee PC 1001p

Eee 1001PX

Asus Eee PC 1001px

Eee 1005HA

Asus Eee PC 1005HA

Eee 1005P(E)

Asus Eee PC 1005P

Eee 1015B

Things that "just work":

  • Wlan (ath9k is part of the kernel; some use brcmsmac)
  • Ethernet
  • Graphics (with kms and dri2, using the xf86-video-ati driver)
  • Webcam (using v4l)
  • Suspend-to-RAM (after installing acpid)
  • Cardreader (but keucr is in staging, thus taints the kernel. PyroPeter experienced crashes while he inserted or removed sd cards)
  • Bluetooth (after installing bluez)
  • CPU Frequency Scaling (Use acpi_cpufreq since linux 3.7)
  • TouchPad (support multi-touch after installing xf86-input-synaptics)
  • Video Acceleration (Using ATI/AMD's propretary driver(catalyst))

/etc/modprobe.d/eeepc1015b.conf:

# supposed to help against following msg in dmesg:
# SP5100 TCO timer: mmio address 0xbafe00 already in use
blacklist sp5100_tco

# if you don't need the sd-card reader you may want to blacklist
# keucr. it is in staging, thus taints the kernel
blacklist keucr

# if you find "ACPI: resource piix4_smbus [io 0x0b00-0x0b07]
# conflicts with ACPI region SMRG [io 0xb00-0xb0f]" 
# in /var/log/messages.log ,try to uncomment the following line
#blacklist i2c_piix4

lspci:

00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 9805
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310]
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
01:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
02:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet (rev c1)

On models with ASMedia USB 3.0 chip, replace last 2 line with:

01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
02:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet (rev c1)
03:00.0 USB controller: ASMedia Technology Inc. Device 1040

lsusb:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 13d3:5702 IMC Networks UVC VGA Webcam

Audio

After running alsaconf the graphics card was the default audio output, so I had to create /etc/asound.conf with the following contents:

defaults.ctl.card 1
defaults.pcm.card 1
defaults.timer.card 1

Volume function key for alsa:

/etc/acpi/handler.sh
......
        open)
            #echo "LID opend!">/dev/tty5
            ;;
    esac
    ;;
## volume control key ##
button/mute)
  case "$2" in
    MUTE) amixer set Master toggle ;;
  esac
  ;;
button/volumedown)
  case "$2" in
    VOLDN) amixer set Master 2%- ;;
  esac
  ;;
button/volumeup)
  case "$2" in
    VOLUP) amixer set Master 2%+ ;;
  esac
  ;;
## volume control key end ##
*)
  logger "ACPI group/action underfined: $1 /$2"
  ;;
esac

Powersaving

When system is idle, ATI/AMD's propretary driver(catalyst) saves 2.5W than xf86-video-ati.

Eee 1015 BX

Most seems to work 'out-of-the-box':

  • Wlan
  • Ethernet
  • Graphics (using the xf86-video-ati driver)
  • Webcam
  • Suspend-to-RAM (with acpi & acpid)
  • Cardreader
  • CPU Frequency Scaling (add 'eeepc-wmi ac battery button fan video' to MODULES array in '/etc/rc.conf')
  • TouchPad (using the xf86-input-synaptics driver)


My blacklist:

# /etc/modprobe.d/blacklist.conf
blacklist sp5100_tco

For sound at DE add this file to your HOME-directory:

#
# ~/.asoundrc
#

defaults.ctl.card 1
defaults.pcm.card 1
defaults.timer.card 1

For volume-control-buttons I use shortcuts with:

amixer -q -c 1 set Master 5+
amixer -q -c 1 set Master 5-
amixer -q -c 1 set Master toggle


Eee 1015 PE/PEM

Hardware

The Eee 1015 series laptops come with a 1024x600 LED display and a Dual Core Intel Atom processor (N550). They also have a Broadcom wireless card and an Atheros Ethernet port.

Here is the output of lspci:

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
01:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0)
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
Note: The wireless card uses the brcmsmac driver. Since linux 3.3.1 the brcmsmac driver depends on the bcma module and blacklisting is no longer required. See Broadcom wireless

Here is the output of lscpu:

Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    2
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 28
Stepping:              10
CPU MHz:               1499.813
BogoMIPS:              3000.61
L1d cache:             24K
L1i cache:             32K
L2 cache:              512K
NUMA node0 CPU(s):     0-3

Installation

To install Arch on the Asus Eee 1015 series you need to use an external cd-rom drive or USB Installation Media.

The partition created by Asus on my 1015 PEM is as follows:

Number Start    End    Size   Type      File System   Flags
1      1049kb   107Gb  107Gb  primary   NTFS           
2      107Gb    123Gb  16.1Gb primary   fat32         hidden
3      123Gb    250Gb  127Gb  primary   NTFS          
4      250Gb    250Gb  21.2Gb primary   

Results may vary. The first partition was the Windows 7 installation. The second is the recovery partition with splashtop. Removing this second partition will cause the fast-start Linux to stop working. The third is Windows D:\ drive and the last one is the boot partition for Windows 7.

Due to the limitations of having 4 partitions per drive I installed arch on the first 107Gb partition and created a swap file instead of a partition as per Swap.

ACPI

ACPI works fine following the acpid guide. The following is for older versions of the kernel.

To enable acpi you need to edit menu.lst and add acpi_osi=Linux to the kernel line like so:

 kernel /boot/vmlinuz-linux root=/dev/sda1 ro acpi_osi=Linux

This enabled you to trigger devices in /sys/devices/platform/eeepc/.

Note: As far as I can tell, this is no longer required. If you do add it, the module eeepc-wmi will fail to load - kernel 2.6.39.2-1

Modules

In order to get CPU frequency scaling as well as the proper special-purpose Eee PC module loaded, you can use the following MODULES statement in /etc/rc.conf:

 MODULES=( acpi-cpufreq cpufreq_ondemand eeepc-wmi )

If you get double keypresses for with your function keys (like the mute key, etc.), add the following into /etc/modprobe.d/blacklist.conf (Create this file if it isn't present)

blacklist eeepc-laptop
Note: As long as you do not add acpi_osi-Linux to menu.lst, the eeepc modules load automagically and are not required in MODULES
Note: As of kernel 3.3.7-1, no extra modules are required in order for full usage of Arch Linux on this laptop.

Eee 1015 PX

Asus_Eee_PC_1015PX

Eee 1015 PN

Asus_EEE_PC_1015pn

Eee 1025C

Asus_EEE_PC_1025c

Eee 1201T

Asus Eee PC 1201T

Eee 1201NL

Asus Eee PC 1201NL

Eee 1215n

Asus EEE PC 1215n

Eee 1215P

Asus EEE PC 1215p

Eee 1215B

Things that work out of the box: Wifi, Ethernet, Video (max resolution available with basic Xorg and xfce packages installed), Touchpad, Keyboard (Fn keys not working).

Note: Since kernel 3.0, you may need to blacklist the "bcma" module for Wifi to work! If iwconfig does not list your wireless card, this means you. See Broadcom_wireless#Wi-Fi_card_does_not_work_or_show_up_since_kernel_upgrade_.28brcmsmac.29.

Things that need work: Audio, Fn keys, Power management.

Installation

Arch setup encountered no problems, GRUB installed successfully with no damages to Windows (need to uncomment the windows lines in in /boot/grub/menu.lst) and Express Gate.

Audio

With the xfce4 desktop environment audio doesn't work by default (didn't test with other de). To fix this, add the following lines in your ~/.asoundrc:

defaults.pcm.card 1
defaults.ctl.card 1

(Credit to Touko Korpela from the Debian mailing list)

Video

Youtube videos with the default ati driver work flawlessly with a resolution of 720p, while with 1080p playback isn't smooth anymore. Didn't test with the catalyst drivers, maybe a better playback could be achieved.

Power Management

ACPI executes correctly and returns remaining battery life. Cpufreq doesn't seem to work, hence making it impossible for Jupiter ([1]) to manage the Super Hybrid Engine. However, from the Jupiter tray icon, screen orientation, resolution and touchpad can be toggled and modified.

By suggestion from the Debian mailing list, I tried loading "powernow-k8" with modprobe to get cpufreq working. This is apparently a bug in the driver detection mechanism of cpufreq, and should be reported upstream, I guess. After loading that module, cpufreq-info seems to work. Have not tried getting Jupiter to manage SHE yet after that.

Suspend and hibernate work OK, with one tiny bug: I can't seem to get the SD-card reader working after resuming from hibernate. After a reboot, it works fine.