Difference between revisions of "ASUS Eee PC 1005HA"

From ArchWiki
Jump to: navigation, search
m (Betarepeating moved page Asus Eee PC 1005HA to ASUS Eee PC 1005HA: Standardizing case. ASUS website capitalizes the whole name, so we should too. http://usa.asus.com/)
(Two-finger scrolling (easy way): out of date)
Line 70: Line 70:
For more information, see [[Touchpad Synaptics]] and the synaptics man file.
For more information, see [[Touchpad Synaptics]] and the synaptics man file.
===Two-finger scrolling (easy way)===
Deprecated method  since Xorg 1.8 no longer uses HAL, but left as reference.
Add the following to your ''11-x11-synaptics.fdi'' file:
<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.EmulateTwoFingerMinZ" type="string">10</merge>
<merge key="input.x11_options.EmulateTwoFingerMinW" type="string">7</merge>
===Two-finger scrolling (alternative way)===
===Two-finger scrolling (alternative way)===

Revision as of 17:33, 7 November 2012

Device Status Modules
Intel 945GME Working xf86-video-intel
Ethernet Working
Wireless Working
Audio Working snd_hda_intel
Camera Working uvcvideo
Card Reader Working
Function Keys Working


For an in-depth guide on the installation see the Beginners_Guide.

Display and input settings

If not already installed, you need xorg and xf86-video-intel to have X working, and also drivers for keyboard and touchpad:

# pacman -S xorg-server xf86-video-intel xf86-input-evdev xf86-input-synaptics

DPI Settings

In general the autodetected DPI does not fit the smaller resolution very well at all. A good comfortable setting would be 96dpi or 75dpi if you like your fonts really small. An easy way to set your DPI would be to add this to the end of your xserverrc (located in /etc/X11/xinit/).

 exec /usr/bin/X -nolisten tcp -dpi 96

Graphic Performance

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: please use the first argument of the template to provide a brief explanation. (Discuss in Talk:ASUS Eee PC 1005HA#)

See Intel for more information.

According to the intel driver documentation, X-Video Motion Compensation or "XvMC" is not enabled by default. Enabling this option can greatly reduce CPU utilization when playing back MPEG-2 video. To enable this option, two things need to be done; first, add this to the device section of your xorg.conf:

Option "XvMC" "true"

Lastly, create a config file to tell the X server where the XvMC library is:

echo /usr/lib/libIntelXvMC.so > /etc/X11/XvMCConfig


To set the keybord layout and other options, edit or create the file /etc/X11/xorg.conf.d/keyboard.conf, and add the following:

Section "InputClass"
  Identifier "Keyboard defaults"
  MatchIsKeyboard "yes"
  Option "XkbLayout" "us"
  Option "XkbModel" "asus_laptop"
  Option "XkbOptions" "terminate:ctrl_alt_bksp"

This gives you a US layout, more layouts can be found at /usr/share/X11/xkb/rules/base.lst. Other options, like using ctrl-alt-backspace to kill the X-server can also be setup here.


Comment out the touchpad section of /etc/X11/xorg.conf.d/10-evdev.conf, and edit /etc/X11/xorg.d/10-synaptics.conf to your liking. This example gives you two finger scroll

Section "InputClass"
   Identifier "touchpad catchall"
   Driver "synaptics"
   MatchIsTouchpad "on"
     Option "VertTwoFingerScroll" "true"
     Option "EmulateTwoFingerMinZ" "40"
     Option "EmulateTwoFingerMinW" "5"

For more information, see Touchpad Synaptics and the synaptics man file.

Two-finger scrolling (alternative way)

Create this script:

# Use xinput --list-props "SynPS/2 Synaptics TouchPad" to extract data 

# Set multi-touch emulation parameters 
xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Pressure" 32 10 
xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Width" 32 8 
xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Two-Finger Scrolling" 8 1 
xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Scrolling" 8 1 1 

# Disable edge scrolling 
xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Edge Scrolling" 8 0 0 0 

# This will make cursor not to jump if you have two fingers on the touchpad and you list one 
# (which you usually do after two-finger scrolling) 
xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Jumpy Cursor Threshold" 32 110 

Make it executable with

$ chmod +x <script-name>

and start it at boot (put it in .xinitrc, for example). Source: [1]


For a nice GUI tool, try lxrandr; it is very simple to use!

Switch to External Monitor:

xrandr --output LVDS --off --output VGA --auto

Switch back to eeepc's LCD:

xrandr --output LVDS --auto --output VGA --off

Powersaving and ACPI

Start off your powersaving adventures by installing Powertop. This is basically a program to see how much power stuff is using, but it also gives you tips on what to change.

# pacman -S powertop

A good starting point is to disable the hardware you do not plan on using. Reboot and enter the BIOS by pressing F2. Disable for example the card reader, camera, ethernet but only if you do not need them of course.

According to Powertop the 1005HA uses around 7-10 Watts on maximum powersave (using Laptop mode tools and cpufreq and the above hardware disabled, using Wifi and writing this). Idle around 5-6 W. Please report how to get it lower!


Laptop mode is a nice and easy way to setup most of the availiable power saving options on the 1005HA. These include spinning down the hard drive and adjusting the power saving modes of the harddrive and CPU, as well as autosuspending of the USB-ports and screen brightness etc. It provides a great centralized configuration file as well as separate configuration files for the various power saving modules managed by Laptop mode tools.

Installation and setup

Install the package with

# pacman -S laptop-mode-tools

The main configuration file is /etc/laptop-mode/laptop-mode.conf but there are more configuration files located in the directory /etc/laptop-mode/conf.d/ Be sure to read them and set them up accordingly.

Note the option in laptop-mode.conf to automatically start many of the other modules.

1005HA specific options for a few of the modules below (there are many more):

LCD brightness

For lcd-brightness, edit the file /etc/laptop-mode/conf.d/lcd-brightness.conf and adjust it as suits you. The darkest is 0 and brightest 15, this is a suggested setup:


CPU Powersaving

The eeepc "Super Hybrid Engine" as it's known under windows has a significant effect on powersaving. This underclocks the FSB for powersave/overclocks for performance and can be controlled via /sys/devices/platform/eeepc/cpufv which is provided by the module eeepc_laptop. It is included in the laptop-mode-tools package, and is activated and configured in the file /etc/laptop-mode/conf.d/eee-superhe.conf See also this forum thread.

As of the relase of kernel 2.6.32 the needed module eeepc_laptop doesn't work, to get this working you will need to add the following to the kernel line in the GRUB config (eg. /boot/grub/menu.lst):


The CPU frequency can be controlled by the file cpufreq.conf provided by laptop mode tools. A good value is ”T2” (75% speed) when on battery and ”minimum” (full speed) when on AC. However, using the cpufrequtils package (see below) is normally a better option, as the ondemand option automatically changes between the specified modes depending on system load.

USB suspend

Tip: make use of the option to disable the suspending of some USB hardware (eg. 3g modems) by using lsusb to get the ID and then insert it in the configuration file.

CPU frequency scaling

See cpufrequtils.


To get the hotkeys working (fn+F1 etc, touchpad lock, powerbutton shutdown, Super hybrid engine toggle), install the acpi-eeepc-generic package from AUR. Configuration is done in the file /etc/conf.d/acpi-eeepc-generic.conf.

Wifi toggle

To enable the toggling of the Wifi by pressing fn+f2, edit the acpi-eeepc-generic config file and change





Sound volume hotkeys

In order to get the hotkeys for muting and raising and lowering of the sound volume, edit /etc/conf.d/acpi-eeepc-generic.conf and replace the lines:

COMMANDS_VOLUME_DOWN=("alsa_set_volume 5%-")
COMMANDS_VOLUME_UP=("alsa_set_volume 5%+")


COMMANDS_MUTE=("@amixer set Master toggle")
COMMANDS_VOLUME_DOWN=("@amixer set Master 10%-")
COMMANDS_VOLUME_UP=("@amixer set Master 10%+")

Note that the value 10% can be any value you prefer, see the man page of amixer.


If you have problems with the script provided in acpi-eeepc-generic, try pm-suspend instead.

To substitute pm-suspend for the acpi sleep script, edit /etc/conf.d/acpi-eeepc-generic.conf and comment out the line that reads:


Replace it with:


Display settings

Create the /etc/X11/xorg.conf file and add the following to it to enable Intel's framebuffer compression, which according to Lesswats.org is supposed to save quite some power.

Section "Device"
 Identifier "Builtin Default intel Device 0"
 Driver	 "intel"
 Option	 "FramebufferCompression" "on"
 Option	 "AccelMethod" "EXA"
 Option	 "Tiling" "on"



Works with the stock 2.6.32 kernel, if you use an earlier kernel you might need to install the driver from the AUR.


WiFi works out of the box with the stock kernel (tested with 2.6.30 and 2.6.32).


To enable/disable the camera:

 # enable
 echo 1 > /sys/devices/platform/eeepc/camera
 # disable
 echo 0 > /sys/devices/platform/eeepc/camera

If you really want camera to be disabled, take a look in devices section of BIOS.

Make sure that the module uvcvideo is loaded

To record video and take photos, you may use cheese or the wxcam package.

To simply test the camera, you may use mplayer:

 mplayer -fps 15 tv://

The webcam works with Skype.


The microphone works out of the box, it's just a matter of configuration. Run:

$ alsamixer

Press <F4> to go to the 'Capture' section. Navigate to the 'Capture' item using the right and left arrow keys and make sure 'LR Capture' appears. If it doesn't, press <Space>. The 'Capture' and 'Digital' levels are a trade-off between gain and static. I recommend setting to 70 and 75 (using the up and down arrow keys), respectivelly, but you can ajust this to your liking. Exit alsamixer pressing <ESC> and test it:

$ arecord /tmp/record.wav

Say something close enough to the microphone and hit <Ctrl+C> to stop recording. Play it with:

$ aplay /tmp/record.wav 

If everything went well, save your settings (as root):

# alsactl store

Source: [2]

Hardware Info


Note that this is the 1005HA-M version.

~]$ lspci

00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)

00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)

00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)

01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)

02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)