Difference between revisions of "ASUS Eee PC 1015pn"

From ArchWiki
Jump to: navigation, search
(Solution 2)
(Bumblebee: a little update to use systemd instead of rc.local)
(11 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[Category:ASUS (English)]]
+
[[Category:ASUS]]
{{Out of date}}
+
{{Article summary start}}
 +
{{Article summary text|General information regarding Asus EEE PC 1015pn and related notes on installing/using Arch Linux on it.}}
 +
{{Article summary end}}
  
This page includes general information regarding Asus EEE PC 1015pn and related notes on installing/using Arch Linux on it.
+
Asus 1015PN is a dual-core netbook with Nvidia IOn graphics for better gaming. It works fine with Linux OSs. This article provides some information on hardwares specs and some knowledge base about it.
  
 
== System Specs ==
 
== System Specs ==
 
*'''CPU:'''  Intel Atom Dual-Core N550 (1.5 GHz)
 
*'''CPU:'''  Intel Atom Dual-Core N550 (1.5 GHz)
  
*'''RAM:''' 1GB 1066MHz DDR3 (up to 2GB)
+
*'''RAM:''' 1GB 1066MHz DDR3 (up to 2GB 1333Mhz)
  
 
*'''HDD:''' 250 GB, 5400 RPM
 
*'''HDD:''' 250 GB, 5400 RPM
  
*'''GPU:''' nVidia ION2 with Optimus
+
*'''GPU:''' nVidia GT218 ION2 with Optimus (Intel GMA 3150 built into the CPU)
  
 
*'''Display:''' 10.1" 1024 x 600 pixels LCD display
 
*'''Display:''' 10.1" 1024 x 600 pixels LCD display
Line 17: Line 19:
 
*'''Wireless:''' BCM4313
 
*'''Wireless:''' BCM4313
  
*'''Bluetooth:''' TODO
+
*'''Bluetooth:''' Working (confirmed in linux 3.6.5)
  
 
*'''Webcam:''' Working (remember to add yourself to video group)
 
*'''Webcam:''' Working (remember to add yourself to video group)
Line 26: Line 28:
  
 
== HDD important issue ==
 
== HDD important issue ==
With the Western Digital hard drive (not SSD), there is an important issue: using the APM (Advanced Power Management) there are too nomerous spin-down, that can damage the hard drive. To confirm this issue, you have to [[pacman|install]] {{Pkg|smartmontools}} from [[Official Repositories]].
+
With the Western Digital hard disc (eg. WD2500BEVT), there is an important issue: using the APM (Advanced Power Management) there are too nomerous spin-down, that can damage the hard drive. To confirm this issue, you have to [[pacman|install]] {{Pkg|smartmontools}} from [[Official Repositories]].
  
 
And you have to run multiple times this command (once in a minute for like 5 minutes):
 
And you have to run multiple times this command (once in a minute for like 5 minutes):
Line 33: Line 35:
  
 
=== Solution 1 ===
 
=== Solution 1 ===
The problem is easily solvable using laptop-mode-tools. In your {{Ic|/etc/laptop-mode/laptop-mode.conf}}, you have to set:
+
The problem is easily solvable using {{Pkg|laptop-mode-tools}}. In your {{Ic|/etc/laptop-mode/laptop-mode.conf}}, you have to set:
 
  #
 
  #
 
  # Should laptop mode tools control the hard drive power management settings?
 
  # Should laptop mode tools control the hard drive power management settings?
Line 52: Line 54:
 
This method correct this issue once and for all: [http://www.synology.com/support/faq_show.php?lang=enu&q_id=407 WDIDLE3]
 
This method correct this issue once and for all: [http://www.synology.com/support/faq_show.php?lang=enu&q_id=407 WDIDLE3]
  
[[http://www.jzab.de/content/ultimate-boot-cd-wdidle3-util-included| This page]] contains a pre-built DOS boot disk to fix this issue.  It can be installed a run from a USB.
+
[[http://www.jzab.de/content/ultimate-boot-cd-wdidle3-util-included This page]] contains a pre-built DOS boot disk to fix this issue.  It can be installed a run from a USB.
  
 
== nVidia ION 2 with Optimus ==
 
== nVidia ION 2 with Optimus ==
Line 66: Line 68:
 
=== Installing acpi_call ===
 
=== Installing acpi_call ===
 
Install {{AUR|acpi_call-git}} from the [[AUR]].
 
Install {{AUR|acpi_call-git}} from the [[AUR]].
Add {{Ic|acpi_call}} module into /etc/[[rc.conf]].
+
Add {{Ic|acpi_call}} module into {{ic|/etc/modules-load.d/}}.
  
 
=== Selecting Video Card ===
 
=== Selecting Video Card ===
Line 137: Line 139:
  
 
== ACPI ==
 
== ACPI ==
As of kernel 3.1, Adding {{Ic|1=acpi_osi=Linux}} to {{Ic|/boot/grub/menu.lst}} is no longer necessary to enable ACPI. The proper modules should be automatically called at boot.
+
As of kernel 3.1, appending {{Ic|1=acpi_osi=Linux}} to the kernel line in your bootloader configuration file (e.g. grub, lilo, syslinux...) is no longer necessary to enable ACPI. The proper modules should be automatically called at boot.
  
 
== Wireless ==
 
== Wireless ==
Kernel >= 2.6.37 include the required module natively.
+
Since linux kernel version 2.6.37, the needed module for BCM4313 is natively included in it. If you by any chance you a kernel equal or older than 2.6.36, then you will need {{AUR|compat-wireless-brcm80211}}.
  
Note: The Broadcom BCM4313 card requires the {{AUR|compat-wireless-brcm80211}} module which is available in the AUR if kernel <=2.6.36
+
For kernel 3.0 or higher, wireless card seems to be blocked by other wrong module (I notice a module called 'bcma-pci-bridge' being loaded -- josephgbr). To solve this issue, you have to [[Kernel_modules#Blacklisting|blacklist]] the kernel module {{Ic|bcma}. In the next reboot, the wireless card should be working.
 
+
For kernel 3.0 or higher, wireless card seems to be blocked due to a bug. To solve this issue, you can try [[Kernel_modules#Blacklisting|blacklisting]] the kernel module {{Ic|bcma}}.
+
  
 
== Bumblebee ==
 
== Bumblebee ==
 
The 1015pn can be configured to run automatically on the Intel video card, turn on and use the Nvidia part for specific processes when requested, and otherwise leave the Nvidia part turned off.
 
The 1015pn can be configured to run automatically on the Intel video card, turn on and use the Nvidia part for specific processes when requested, and otherwise leave the Nvidia part turned off.
  
First, add the command
+
First, install {{AUR|acpi_call-git}} from the [[AUR]].
echo "\OSGS 0x03" > /proc/acpi/call
+
Add {{Ic|acpi_call}} module into {{ic|/etc/modules-load.d/}}.
to {{ic|/etc/rc.local}} to ensure that the Intel VGA controller is used on every subsequent boot. Next, install and configure [[Bumblebee]]. Finally, remove any automated or otherwise scripted acpi calls to turn off the Nvidia VGA controller.
+
 
 +
Lets make use of systemd's tmpfiles to ensure that the Intel VGA controller is used on every subsequent boot.
 +
 
 +
{{hc|/etc/tmpfiles.d/acpi_call.conf|
 +
w /proc/acpi/call - - - - \OSGS 0x03}}
 +
 
 +
Next, install and configure [[Bumblebee]]. Finally, remove any automated or otherwise scripted acpi calls to turn off the Nvidia VGA controller.
  
 
Power management of the Nvidia VGA controller can also be handled by Bumblebee. Please note, however, that Bumblebee support for power management is currently experimental. To use automatic power management of the Nvidia card, first go to {{ic|/etc/bumblebee/bumblebee.conf}}, and change ENABLE_POWER_MANAGEMENT=Y and STOP_SERVICE_ON_EXIT=Y.
 
Power management of the Nvidia VGA controller can also be handled by Bumblebee. Please note, however, that Bumblebee support for power management is currently experimental. To use automatic power management of the Nvidia card, first go to {{ic|/etc/bumblebee/bumblebee.conf}}, and change ENABLE_POWER_MANAGEMENT=Y and STOP_SERVICE_ON_EXIT=Y.
Line 163: Line 169:
  
 
These are the acpi calls that Bumblebee will use to dynamically control the power of the Nvidia card. Now if bumblebee is included in the {{Ic|MODULES}} section of {{Ic|/etc/rc.conf}}, Bumblebee will automatically power down the Nvidia VGA controller unless it is being used with the optirun command.
 
These are the acpi calls that Bumblebee will use to dynamically control the power of the Nvidia card. Now if bumblebee is included in the {{Ic|MODULES}} section of {{Ic|/etc/rc.conf}}, Bumblebee will automatically power down the Nvidia VGA controller unless it is being used with the optirun command.
 
  
 
== To Do ==
 
== To Do ==
# Manage to get the {{Pkg|xf86-video-intel}} and {{Pkg|nvidia}} packages installed (specific libgl being used by each one)
+
# Manage to get the {{Pkg|xf86-video-intel}}, and {{Pkg|xf86-video-nouveau}} or {{Pkg|nvidia}} packages installed (specific libgl being used by each one)
# Get the Bluetooth working, without kernel panic attacks.
+
# Fix notes about rc.conf and initscripts.
  
 
== Links ==
 
== Links ==
 
*[http://linux-hybrid-graphics.blogspot.com/ http://linux-hybrid-graphics.blogspot.com/]
 
*[http://linux-hybrid-graphics.blogspot.com/ http://linux-hybrid-graphics.blogspot.com/]
 +
*[https://sites.google.com/site/mtrons/howtos/eeepc-1015pn https://sites.google.com/site/mtrons/howtos/eeepc-1015pn]
 +
*[https://github.com/Bumblebee-Project/acpi_call https://github.com/Bumblebee-Project/acpi_call]
 +
*[https://github.com/Bumblebee-Project/Bumblebee https://github.com/Bumblebee-Project/Bumblebee]

Revision as of 10:59, 29 November 2013

Template:Article summary start Template:Article summary text Template:Article summary end

Asus 1015PN is a dual-core netbook with Nvidia IOn graphics for better gaming. It works fine with Linux OSs. This article provides some information on hardwares specs and some knowledge base about it.

System Specs

  • CPU: Intel Atom Dual-Core N550 (1.5 GHz)
  • RAM: 1GB 1066MHz DDR3 (up to 2GB 1333Mhz)
  • HDD: 250 GB, 5400 RPM
  • GPU: nVidia GT218 ION2 with Optimus (Intel GMA 3150 built into the CPU)
  • Display: 10.1" 1024 x 600 pixels LCD display
  • Wireless: BCM4313
  • Bluetooth: Working (confirmed in linux 3.6.5)
  • Webcam: Working (remember to add yourself to video group)
  • Card Reader: Working
  • Extras: 3 USB 2.0 ports, Bluetooth 3

HDD important issue

With the Western Digital hard disc (eg. WD2500BEVT), there is an important issue: using the APM (Advanced Power Management) there are too nomerous spin-down, that can damage the hard drive. To confirm this issue, you have to install smartmontools from Official Repositories.

And you have to run multiple times this command (once in a minute for like 5 minutes):

# smartctl -a /dev/sda|grep Load_Cycle_Count

If the number under Load_Cycle_Count is increasing in a small amount of time (1 or 2 in a minute) you have this issue.

Solution 1

The problem is easily solvable using laptop-mode-tools. In your /etc/laptop-mode/laptop-mode.conf, you have to set:

#
# Should laptop mode tools control the hard drive power management settings?
#
CONTROL_HD_POWERMGMT=1

#
# Power management for HD (hdparm -B values)
#
BATT_HD_POWERMGMT=255
LM_AC_HD_POWERMGMT=255
NOLM_AC_HD_POWERMGMT=255

This disable all power management systems of the hard drive cause a light heat up (maybe). The same behaviour can be obtained running this command:

# hdparm -B 255 /dev/sda

the 255 number is the power-management level, in a range of 1-255 where 1 is maximum powersaving and 255 powersaving disabled. However setting the value to 253 causes a lot of spin-down. Setting the spin-down feature (it parks the heads away from disk) however can save the hard disk in case of a fall.

Solution 2

This method correct this issue once and for all: WDIDLE3

[This page] contains a pre-built DOS boot disk to fix this issue. It can be installed a run from a USB.

nVidia ION 2 with Optimus

Optimus doesn't work at all but it is possible to choose which graphical card will be used on next reboot.

You can get 2 'modes' :

  • By default (if you do not do anything) the machine starts with the Nvidia beeing the only VGA controller visible (so it will use the ION chip).
  • Using some tools you can start with the Intel and Nvidia VGA controller visible. In this mode the Intel controller is used and it is possible to power-down the Nvidia part.

To switch between those modes you will need acpi_call-gitAUR.

Installing acpi_call

Install acpi_call-gitAUR from the AUR. Add acpi_call module into /etc/modules-load.d/.

Selecting Video Card

The ACPI method \OSGS is used for selecting the video card for the next boot. The first argument to it determines the card(s) to be enabled. Only the two rightmost bits are used. If bit 0 is enabled, the intel card is enabled as well. Bit 1 correspondends with the nvidia card. If no bits are enabled, only the nvidia card will be enabled. Hence:

  • \OSGS 3 - enable Intel + Nvidia (Optimus mode)
  • \OSGS 2 (or even \OSGS 0x00) - enable Nvidia only (discrete mode)
  • \OSGS 1 - enable Intel only (integrated mode)

Using the acpi_call module, you can execute these commands. Example: to select Intel + Nvidia on next reboot:

echo '\OSGS 3' > /proc/acpi/call


Note: You will need to do this at each boot as long as you want to stay with the Intel part (If you do not do this the Eee will start with only the Nvidia Ion VGA controller). Adding the above command to /etc/rc.local will run the command on every boot (for the next boot). This is ideal if you want to run X on the Intel VGA controller.

You can check the current mode with :

echo "\AMW0.DSTS 0x90013" > /proc/acpi/call
cat /proc/acpi/call

Substract 0x30000 from the result and interpret the remaining two bits as the first argument passed to \OSGS. Thus:

  • 0x30003 - intel + nvidia are on (Optimus mode)
  • 0x30002 - only the nvidia card is on (discrete mode)
  • 0x30001 - only the intel card is on (integrated mode)

After reboot you can see which controllers are enabled with:

lspci -nn | grep '\[03'

You can now power down the ion part with (you'll need the acpi_call module loaded):

echo "\_SB.PCI0.P0P4.DGPU.DOFF" > /proc/acpi/call

Note: when the nvidia card is the only enabled card, the above function does nothing.

Note: When leaving suspend you need to do this again because the Nvidia part reactivates itself.

rc script to disable nvidia:

 #!/bin/bash
 
 . /etc/rc.conf
 . /etc/rc.d/functions
 
 
 if lsmod | grep -q acpi_call; then
         stat_busy 'Swith per ACPI_CALL to Optimus'
         echo "\OSGS 0x03" > /proc/acpi/callrayt5
         echo "\_SB.PCI0.P0P4.DGPU.DOFF" > /proc/acpi/call
         echo "\AMW0.DSTS 0x90013" > /proc/acpi/call
         result=$(cat /proc/acpi/call)
         case "$result" in
         0x30003)
                 stat_done
         ;;
         *)
                 stat_fail
         ;;
         esac
 else
         stat_busy 'ACPI_CALL mod not loaded'
         stat_fail
 fi

Check consumption

You can check consumption with:

cat /sys/class/power_supply/BAT0/current_now
  • Before disabling: ~1700mA.
  • After disabling: ~1000mA.

As you can see this method saves a lot of battery!

ACPI

As of kernel 3.1, appending acpi_osi=Linux to the kernel line in your bootloader configuration file (e.g. grub, lilo, syslinux...) is no longer necessary to enable ACPI. The proper modules should be automatically called at boot.

Wireless

Since linux kernel version 2.6.37, the needed module for BCM4313 is natively included in it. If you by any chance you a kernel equal or older than 2.6.36, then you will need compat-wireless-brcm80211AUR.

For kernel 3.0 or higher, wireless card seems to be blocked by other wrong module (I notice a module called 'bcma-pci-bridge' being loaded -- josephgbr). To solve this issue, you have to blacklist the kernel module {{Ic|bcma}. In the next reboot, the wireless card should be working.

Bumblebee

The 1015pn can be configured to run automatically on the Intel video card, turn on and use the Nvidia part for specific processes when requested, and otherwise leave the Nvidia part turned off.

First, install acpi_call-gitAUR from the AUR. Add acpi_call module into /etc/modules-load.d/.

Lets make use of systemd's tmpfiles to ensure that the Intel VGA controller is used on every subsequent boot.

/etc/tmpfiles.d/acpi_call.conf
w /proc/acpi/call - - - - \OSGS 0x03

Next, install and configure Bumblebee. Finally, remove any automated or otherwise scripted acpi calls to turn off the Nvidia VGA controller.

Power management of the Nvidia VGA controller can also be handled by Bumblebee. Please note, however, that Bumblebee support for power management is currently experimental. To use automatic power management of the Nvidia card, first go to /etc/bumblebee/bumblebee.conf, and change ENABLE_POWER_MANAGEMENT=Y and STOP_SERVICE_ON_EXIT=Y. This gives Bumblebee permission to turn on and off the Nvidia card. Stop service on exit means that the Nvidia card will be turned off when not currently being used by any process.

Next, two new files, cardon and cardoff, must be created in /etc/bumblebee/, with the following contents:

cardon
\_SB.PCI0.P0P4.DGPU.DON
cardoff
\_SB.PCI0.P0P4.DGPU.DOFF

These are the acpi calls that Bumblebee will use to dynamically control the power of the Nvidia card. Now if bumblebee is included in the MODULES section of /etc/rc.conf, Bumblebee will automatically power down the Nvidia VGA controller unless it is being used with the optirun command.

To Do

  1. Manage to get the xf86-video-intel, and xf86-video-nouveau or nvidia packages installed (specific libgl being used by each one)
  2. Fix notes about rc.conf and initscripts.

 Links