ASUS Eee TOP

From ArchWiki
Revision as of 22:43, 11 December 2010 by Thestinger (Talk | contribs) (Configuring keyboard: out of date)

Jump to: navigation, search

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: please use the first argument of the template to provide a brief explanation. (Discuss in Talk:ASUS Eee TOP#)

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: please use the first argument of the template to provide a brief explanation. (Discuss in Talk:ASUS Eee TOP#)

WARNING: THIS ARTICLE IS INCOMPLETE! Visit the Arch forum thread link below to get information on installing Arch Linux on the Asus EEE TOP.

Most of this information is from the Guide: Install Ubuntu on Asus Eee Top 1602

Before You Begin

Choosing Your Installation Media

The EEE Top does not have an optical drive installed on the machine. This means you will need to install Arch Linux through one of the alternative methods:

  1. External USB CD-ROM drive
  2. USB pen drive (Recommended)
  3. Network (PXE)

Prepare Hard Drive

You can use the whole disk (160GB) or a dual boot system with preinstalled Microsoft Windows XP. To do create dual boot-system you must resize the data partition (my nettbook had 2 partition one for windows and one for data).

Dual-boot-System windows.

Delete this partition and create a Extended Partiotion from it. Create one logical partion as data partition for Windows (mine was 40 GB) and let the rest as it. We install the archlinux there.

Installing Arch Linux

Note: Please refer to The Beginners Guide for detailed instructions, if needed. Ideally, your CD/USB should boot up just fine on Eee Top without any need for additional options.

Booting Arch the installation CD/USB

The stock kernel on Arch installation media since 2008.06 and newer support EeeTops's ethernet network card. So there's no need to install any additional modules before or during the installation process to have a working network connection.


Mount the installation media

The installer should mount USB source media automatically.

Start the Installation

To start the installation just like normal use the Official Installation Guide.

Select Packages

Choose the proper source of package. For further in installation we need the BASE and DEVEL packages. Additionally we install following packages:

  • hal - for hardware detection
  • xorg - for X11 (see Xorg)
  • alsa-oss - for sound (see ALSA)
  • Any preferred desktop environment - like GNOME, KDE, LXDE, E17 or anything else
  • wireless tools - for configuring and using wireless driver (see Wireless Setup
  • Any preferred network manager - Wicd or anything else
  • base-devel - base development kit
  • fakeroot - create fakeroot environment
  • xf86-video-intel - intel graphics driver for our display

To install evtouch driver from AUR (Recommended) you need to reinstall 'libx11', 'libxau', 'xproto'. It is also necessary to install yaourt. After yaourt is installed - the evtouch screen driver can be installed from AUR.

yaourt -Sy xf86-input-evtouch.