From ArchWiki
Revision as of 10:01, 10 April 2012 by Grubshka (talk | contribs)
Jump to: navigation, search
Device Status Modules
Intel graphics Working xf86-video-intel
Nvidia graphics Working, see below nvidia, bumblebee
Graphic outputs Not working nvidia, bumblebee
Ethernet Working atl1c
Wireless Working iwlan
Audio Working, see below snd_hda_intel
Touchpad Working xf86-input-synaptics
Camera Working uvcvideo
USB 3.0 Working xhci_hcd
Card Reader Working
Special Keys Untested
Power management Working, see below


CPU: Intel Core i7-2630QM @ 2.00GHz

Mainboard: Intel HM65 Express


Display: 15,6" HD LED (1920x1080)

Graphics adapter: Intel Core Processor Integrated Graphics Controller, NVIDIA GeForce GT 555M

Soundcard: Integrated Intel HDA, Bang & Olufsen speakers with external subwoofer

Network: Atheros Gigabit Ethernet Controller, Intel Centrino Wireless-N 1030

Hard disk: Seagate Momentus 750GB 5400rpm SATA

Webcam: IMC Networks

Touchpad: Synaptics


There is a BIOS update (v207) on Asus support website (go to the english one if you don't find) that fix the numpad bug.


Works out of the box.

Follow the CPU Frequency Scaling guide to enable speed-stepping. Processor has Intel Turbo Boost which works out of the box, but you can't see the frequencies above 2.4GHz in /proc/cpuinfo. To see the actual frequency install i7z.



Follow these guides: Xorg and Intel. You will need to blacklist the nouveau driver (the kernel detects the nvidia card and loads it). Bumblebee will load it as needed, see next section.

blacklist nouveau


The official proprietary nvidia drivers for linux do not support Nvidia Optimus yet, but there is a workaround in the form of bumblebeeAUR. It enables the use of Nvidia graphic card via virtualgl. Just follow the instructions for setting up bumblebee in our wiki.


VGA untested.

HDMI not working, but still testing. I'm not sure if it can work on this laptop. See [Bumblebee FAQ]


Follow the official documentation: ALSA and/or Pulseaudio

The external subwoofer is not working, investigation needed.


Follow the Synaptics guide.



Power management

USB prevents system suspend, you need to edit or create /etc/pm/config.d/usb3-suspend-workaround with:

Template error: are you trying to use the = sign? Visit Help:Template#Escape template-breaking characters for workarounds.

There is also a freezing bug with USB and laptop-mode when shutting down on battery. You can fix it by removing USB modules on shutdown:

rmmod xhci_hcd ehci_hcd