ASUS Zenbook UX31E

From ArchWiki
Revision as of 18:27, 25 February 2012 by Jamie Kitson (talk | contribs) (Graphics: HDMI out)
Jump to navigation Jump to search

This template has only maintenance purposes. For linking to local translations please use interlanguage links, see Help:i18n#Interlanguage links.

Local languages: Català – Dansk – English – Español – Esperanto – Hrvatski – Indonesia – Italiano – Lietuviškai – Magyar – Nederlands – Norsk Bokmål – Polski – Português – Slovenský – Česky – Ελληνικά – Български – Русский – Српски – Українська – עברית – العربية – ไทย – 日本語 – 正體中文 – 简体中文 – 한국어

External languages (all articles in these languages should be moved to the external wiki): Deutsch – Français – Română – Suomi – Svenska – Tiếng Việt – Türkçe – فارسی

This page contains instructions, tips, pointers, and links for installing and configuring Arch Linux on the ASUS Zenbook UX31E Ultrabook. (There is probably little/no difference with his 11" little brother, the UX21E)

Installation issues

If you get an error trying to format partitions when installing Arch try adding this line to the kernel parameters


UEFI Booting

As of 21-Feb-2012 Grub2 seems to disagree with Asus UEFI, halting at "Loading inital ramdisk", use BIOS instead.


For best user experience, use the latest mainline kernel (linux-mainlineAUR).

The following article refers to at least kernel 3.2.rc6

Touch Pad

There are different versions of the UX31, some have Sentelic and some have Elenatec - Touch pads.

Elenatec Touch pads

Touch & Scroll works out of the box. Clickpad functionality does not. (However, using two and three finger touches for right an middle click works fine).

If higher pressure must be applied to your touchpad in order to function properly, tweak the following properties according to your needs [1]

synclient FingerLow=5
synclient FingerHigh=15

Alternatively, edit your /etc/X11/xorg.conf.d/10-synaptics.conf

Section "InputClass"
       Identifier "touchpad catchall"
       Driver "synaptics"
       MatchIsTouchpad "on"
       MatchDevicePath "/dev/input/event*"
       Option "TapButton1" "1"
       Option "TapButton2" "3"
       Option "TapButton3" "2"
       Option "VertTwoFingerScroll" "1"
       Option "HorizTwoFingerScroll" "1"
       Option "FingerLow" "5"
       Option "FingerHigh" "15"

Tip : Multifinger taps; two finger for middle click, three fingers for right click.

Sentelic Touchpads

The Sentelic Touchpad drivers have been added to the 3.2 kernel, so it should work out of the box by now. However this only supports basic functionality, for scrolling and other features one of the following two patches must be used.


ReubenBond has made contact with a sentelic representative who has provided him with official documentation on putting the device into absolute positioning mode. The latter can be accessed here:

This looks very promising and ReubenBond is committed to developing a driver in the next few weeks. This is all referenced in the forum


Saaros's driver works well for two finger and side scrolling and is fairly straight forward to apply and build. Unfortunately however, it does slight impede normal functionality, pointing doesn't seem quite as accurate and tapping doesn't seem quite as sensitive.


Works out of the box


There seems to be an issue whereby having an HDMI device plugged in at boot results in the X screens being switched and also the laptop screen not coming on.


Works fine with the ath9k driver, included in the kernel since 2.6.27. Edit rc.conf as root and add ath9k to the MODULES array.

Warning: Do not forget to install the wireless_tools and wpa_suppliant packages during the installation since you will get stuck with no internet access if you don't!

Unstable Wireless when using Network Manager

Some users experience connection drops when using wireless. For some users this can be fixed by setting the wireless connection's BSSID (usually the router's MAC address). This only works if your wireless connection only has one access point as the BSSID is unique for each access point.

Ethernet - USB adapter

Note: The Asix USB ethernet drivers are included in the current (3.2.2-1) kernel, so it should work out of the box now

The Ethernet USB adapater which comes with the ASUS UX31 and UX21 models is the Asix "USB to Fast Ethernet" adapter, model AX88772B. At the present, the device is not recognized by the currently available kernels. However, the source for the driver for Linux Kernels 2.6.38 and later can be downloaded at the following link: AX88772B Linux Driver v4.2.0:

Once downloaded, the source needs to be compiled. First unzip the file as follows:


Next, go into the unzipped directory and compile the source as follows:

cd AX88772B_772A_760_772_178_LINUX_Driver_v4.1.0_Source

Install the just compiled module:

sudo make install

Finally load the module:

sudo modprobe asix

That's it. You should be able to connect using a wired connection now.

Solid State Drive

Check Solid_State_Drives

Power Management

Suspend to RAM

The USB modules must be unloaded or the laptop won't come out of sleep mode.


SUSPEND_MODULES="xhci_hcd ehci_hcd uhci_hcd"


Note: The following seems to be unnecessary.

The USB 3.0 module needs to be unloaded before suspending and X needs to disable/enable DPMS to get the screen back on on resume.

This can be done by creating a script in /etc/pm/sleep.d/ Pm-utils#Advanced_Configuration

This works with kernel >= 3.1.8-1 :

EHCI_BUSES="0000:00:1a.0 0000:00:1d.0"
case "${1}" in
       # Disable touch-to-tap on Zenbook Sentelic touchpad
       # I don't know if this is needed
       # This may even stop your touchpad from working after resume
       echo -n 0x90 0x80 > /sys/devices/platform/i8042/serio4/setreg
       echo -n c > /sys/devices/platform/i8042/serio4/flags
       # Hacky workaround to fix display after suspend
       export DISPLAY=":0"
       export XAUTHORITY="/home/YOURUSER/.Xauthority"
       xset dpms force off
       xset dpms force on

Don't forget to make the script executable :

# chmod +x /etc/pm/sleep.d/95usbscreen

If you find that your touchpad doesn't work after resume then comment out the two echo lines.


Do not add the following option to the kernel line



dmesg | grep -i "acpi fadt"


ACPI FADT declares the system doesn't support PCIe ASPM, so disable it.


Enabling i915_enable_rc6 will improve battery perfomance significatively but might also cause sudden shutdowns. To enable it, add the following option to your kernel line.


To check the current state of all i915 parameters execute as root (bash)

for i in /sys/module/i915/parameters/*;do echo ${i}=`cat $i`;done

Module parameter details

modinfo i915

For sudden shutdowns you can try fixing DSDT part of ACPI.

Additional powersavings

Configure Laptop_Mode_Tools and don't forget to check CPU_Frequency_Scaling

Additional ressources