ASUS Zenbook UX31E

From ArchWiki
Revision as of 20:54, 18 June 2012 by Jamie Kitson (Talk | contribs) (Sentelic Touchpads: multi-touch now supported out of the box since 3.4)

Jump to: navigation, search

This page contains instructions, tips, pointers, and links for installing and configuring Arch Linux on the ASUS Zenbook UX31E Ultrabook. (There is probably little/no difference with his 11" little brother, the UX21E)

Installation issues

If you get an error trying to format partitions when installing Arch try adding this line to the kernel parameters



Touch Pad

There are different versions of the UX31, some have Sentelic and some have Elenatec - Touch pads.

Elenatec Touch pads

Touch & Scroll works out of the box. Clickpad functionality does not. (However, using two and three finger touches for right an middle click works fine).

If higher pressure must be applied to your touchpad in order to function properly, tweak the following properties according to your needs [1]

synclient FingerLow=5
synclient FingerHigh=15

Alternatively, edit your /etc/X11/xorg.conf.d/10-synaptics.conf

Section "InputClass"
       Identifier "touchpad catchall"
       Driver "synaptics"
       MatchIsTouchpad "on"
       MatchDevicePath "/dev/input/event*"
       Option "TapButton1" "1"
       Option "TapButton2" "3"
       Option "TapButton3" "2"
       Option "VertTwoFingerScroll" "1"
       Option "HorizTwoFingerScroll" "1"
       Option "FingerLow" "5"
       Option "FingerHigh" "15"

Tip : Multifinger taps; two finger for middle click, three fingers for right click.

Sentelic Touchpads

The Sentelic Touchpad drivers have been added to the 3.2 kernel, so it should work out of the box by now. Since 3.4 this supports scrolling and multi-touch features. [In case of problems with the touchpad after resume see Suspend to RAM]


Works out of the box


There seems to be an issue whereby having an HDMI device plugged in at boot results in the screens being switched and also the laptop screen not coming on. To make this more bearable you can automate switching HDMI on with the following udev rule and script:

ACTION=="change", SUBSYSTEM=="drm", RUN+="/usr/sbin/hdmi-plugged"

export XAUTHORITY=/home/$USER/.Xauthority
export DISPLAY=:0

/usr/bin/xrandr -display :0 --output eDP1 --auto --output HDMI1 --auto --above eDP1

Colour Profiles

Colour accuracy on the Zenbook is not very good. There is a UX31E ICC profile on the Noteboocheck review. However, I find that too green using xcalib and so use the UX21E version.


Works fine with the ath9k driver, included in the kernel since 2.6.27. Edit rc.conf as root and add ath9k to the MODULES array.

Warning: Do not forget to install the wireless_tools and wpa_suppliant packages during the installation since you will get stuck with no internet access if you do not!

Unstable Wireless when using Network Manager

Some users experience connection drops when using wireless. For some users this can be fixed by setting the wireless connection's BSSID (usually the router's MAC address). This only works if your wireless connection only has one access point as the BSSID is unique for each access point.

Kernel Panics

There is an issue with the ath9k driver that causes the laptop to completely freeze and forcing you to hard reboot. The patch for it is included in 3.3-rc6.


In order for the bluetooth device to be recognized properly you need this patch:

There is also a kernel in the AUR which includes this:

Ethernet - USB adapter

Note: The Asix USB ethernet drivers are included in the current (3.2.2-1) kernel, so it should work out of the box now

The Ethernet USB adapater which comes with the ASUS UX31 and UX21 models is the Asix "USB to Fast Ethernet" adapter, model AX88772B. At the present, the device is not recognized by the currently available kernels. However, the source for the driver for Linux Kernels 2.6.38 and later can be downloaded at the following link: AX88772B Linux Driver v4.2.0:

Once downloaded, the source needs to be compiled. First unzip the file as follows:


Next, go into the unzipped directory and compile the source as follows:

cd AX88772B_772A_760_772_178_LINUX_Driver_v4.1.0_Source

Install the just compiled module:

sudo make install

Finally load the module:

sudo modprobe asix

That's it. You should be able to connect using a wired connection now.

Solid State Drive

Check Solid_State_Drives

Power Management

Suspend to RAM

The USB modules must be unloaded or the laptop will not come out of sleep mode.


SUSPEND_MODULES="xhci_hcd ehci_hcd uhci_hcd"



If you have patched the kernel to enable multitouch with the Sentelic touchpad, the touchpad may stop working after resume. In this case add the psmouse module to the list.

SUSPEND_MODULES="xhci_hcd ehci_hcd uhci_hcd psmouse"


Do not add the following option to the kernel line



dmesg | grep -i "acpi fadt"


ACPI FADT declares the system does not support PCIe ASPM, so disable it.


Enabling i915_enable_rc6 will improve battery performance significantly. To enable it, add the following option to your kernel line.


To check the current state of all i915 parameters execute as root (bash)

for i in /sys/module/i915/parameters/*;do echo ${i}=`cat $i`;done

Module parameter details

modinfo i915

You may suffer sudden shutdowns if you run a kernel prior to 3.3.0-rc6. To fix this, you have to upgrade or patch your kernel (see the bug report on freedesktop:, patches at the end, read the Eugeni Dodonov's messages).

Note that kernel 3.3-rc6 should not yield hard-shutdowns any more but that you still have to enable it explicitly by appending i915.i915_enable_rc6=1 to the kernel line.

Additional powersavings

Configure Laptop_Mode_Tools and do not forget to check CPU_Frequency_Scaling

Additional ressources