Acer Aspire 1410
This page will eventually hold information to install Arch Linux on the Acer Aspire 1410. Here is the (albeit empty) forum post for discussion: http://bbs.archlinux.org/viewtopic.php?pid=626296
|Graphics||Integrated Intel® Graphics Media Accelerator 4500MHD||Install xf86-video-intel|
|Wireless||  Intel WiFi Link 5100 802.11a/b/g/Draft-N Wireless
or Atheros AR9285 Wireless Network Adapter
| Install iwlwifi-5000-ucode|
Out-of box (kernel module ath9k)
|Ethernet|| Attansic Technology Gigabit Ethernet
or Atheros Communications Device 1063
|Audio|| Built-in speakers
|Card Reader|| 5-in-1 card reader:
|Webcam||Chicony Electronics Co. Ltd||Works out-of-box|
|Touchpad||Install xf86-input-evdev, xf86-input-synaptics|
|HDMI Out||Works OOTB|
If you are receiving errors booting or during the install, try setting the SATA mode to "IDE" in the BIOS. This is not necessary for all users.
During the Installation
Be sure to install the necessary wireless driver (see above), "wireless_tools", and optionally "netcfg" if you would like wireless to work post-install.
Setup the Touchpad
Make sure to install xf86-input-synaptics. If you use HAL for Xorg hotplugging it will be autoloaded. Don't forget to enable the touchpad with <Fn>-F7. The following threads might also be interesting:  
If the noise is running too often or making too much noise, try installing the latest version of acerhdf.
Panel aspect ratio
Default mode for this laptop is 1366x768 (widescreen). Different resolutions may look ugly because of whole-screen-stretching. To overcome this do the command from regular user:
xrandr --output LVDS1 --set "scaling mode" "Full aspect"