Difference between revisions of "Acer Aspire 1691 WLMi"

From ArchWiki
Jump to: navigation, search
(ACPI)
(Wireless)
Line 23: Line 23:
 
Works fine using the tg3 module.
 
Works fine using the tg3 module.
 
==Wireless==
 
==Wireless==
My ipw2200 card works fine with the ipw2200 module.
+
Install driver:
 +
pacman -S extra/ipw2200-fw
 +
Get WiFi LED signalization working:
 +
echo "options ipw2200 led=1" > /etc/modprobe.conf
  
 
==Modem==
 
==Modem==

Revision as of 02:02, 25 November 2006

Tango-document-new.pngThis article is a stub.Tango-document-new.png

Notes: please use the first argument of the template to provide more detailed indications. (Discuss in Talk:Acer Aspire 1691 WLMi#)

.......

Hardware

Audio:

Video:

Modem:

Wired NIC:

Wireless NIC: Intel IPW 2200

Kernel

To get all the things working, use Beyond kernel...


Networking

Wired

Works fine using the tg3 module.

Wireless

Install driver:

pacman -S extra/ipw2200-fw 

Get WiFi LED signalization working:

echo "options ipw2200 led=1" > /etc/modprobe.conf

Modem

....I don't use it...

Power Management

ACPI

Install ACPI daemon and start it.

# pacman -S acpid
# /etc/rc.d/acpid start

Also add acpid to the DAEMONS line in you /etc/rc.conf (note that this is not necessary if you already have hal in there since acpid has been added to its starting script).


I found out that when booted with ACPI on, the laptop makes kind of high frequency noise which can be really annoying when you work in otherwise quiet room. There is no such noise when you boot with acpi=off. I searched for a solution and I found this:

Pass this to the kernel by changing your /boot/grub/menu.lst (the whole entry should look something like this):

title  Arch Linux Beyond
root   (hd0,0)
kernel /vmlinuz26beyond root=/dev/hda3 ro pci=bios idle=halt acpi_sleep=s3_bios
initrd /kernel26beyond.img

Many thanks for the trick should go to andreas_mauser on ubuntu forums [1].

CPU frequency scaling

There are various ways how to do this (see e.g. SpeedStep), but I like this one:

Install cpufrequtils

# pacman -S cpufrequtils

Edit /etc/conf.d/cpufreq

#configuration for cpufreq control

# valid governors:
#  ondemand, performance, powersave,
#  conservative, userspace
governor="ondemand"

# valid suffixes: Hz, kHz (default), MHz, GHz, THz
min_freq="600Mhz"
max_freq="1.5GHz"

Load the speedstep_centrino module using modprobe. Alternatively, you can add it to the MODULES list in /etc/rc.conf to load it at boot time. Don't forget to add cpufreq to the DAEMONS array.

DAEMONS=(syslog-ng @network netfs crond @hal fam @ifplugd cpufreq firestarter alsa gdm)

Xorg

synaptics touchpad... todo

Section "InputDevice"
 	Identifier    "Mouse1"
        Driver        "synaptics"
 	Option        "Device"        "/dev/psaux"
 	Option        "Protocol"      "auto-dev"
 	Option        "LeftEdge"      "1700"
 	Option        "RightEdge"     "5300"
 	Option        "TopEdge"       "1700"
 	Option        "BottomEdge"    "4200"
 	Option        "FingerLow"     "25"
 	Option        "FingerHigh"    "30"
 	Option        "MaxTapTime"    "180"
 	Option        "MaxTapMove"    "220"
 	Option        "VertScrollDelta" "100"
 	Option        "MinSpeed"      "0.06"
 	Option        "MaxSpeed"      "0.12"
 	Option        "AccelFactor" "0.0010"
 	Option        "SHMConfig"     "true"
#  	Option        "Repeater"      "/dev/ps2mouse"
EndSection

To use this you'll need to change your InputDevice line in your "ServerLayout" section to use the synaptics mouse....todo...

External Resources

...