Difference between revisions of "Acer Aspire 1691 WLMi"

From ArchWiki
Jump to: navigation, search
(CPU frequency scaling)
Line 5: Line 5:
'''Processor:''' Intel Pentium M processor 1.50GHz
'''Processor:''' Intel Pentium M 1.50GHz
'''Video:''' Intel Corporation Mobile 915GM/GMS/910GML Chipset
'''Video:''' Intel Corporation Mobile 915GM/GMS/910GML Chipset

Revision as of 02:40, 25 November 2006



Processor: Intel Pentium M 1.50GHz

Video: Intel Corporation Mobile 915GM/GMS/910GML Chipset

Audio: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio

Wired NIC: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)

Wireless NIC: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)


To get all the things working, use Beyond kernel...



Install driver:

# pacman -S ipw2200-fw 

Get WiFi LED signalization working:

# echo "options ipw2200 led=1" > /etc/modprobe.conf

Power Management


Install ACPI daemon and start it.

# pacman -S acpid
# /etc/rc.d/acpid start

Also add acpid to the DAEMONS line in you /etc/rc.conf (note that this is not necessary if you already have hal in there since acpid has been added to its starting script).

I found out that when booted with ACPI on, the laptop makes kind of high frequency noise which can be really annoying when you work in otherwise quiet room. There is no such noise when you boot with acpi=off. I searched for a solution and I found this:

Pass this to the kernel by changing your /boot/grub/menu.lst (the whole entry should look something like this):

title  Arch Linux Beyond
root   (hd0,0)
kernel /vmlinuz26beyond root=/dev/hda3 ro pci=bios idle=halt acpi_sleep=s3_bios
initrd /kernel26beyond.img

Many thanks for the trick should go to andreas_mauser on ubuntu forums [1].

CPU frequency scaling

There are various ways how to do this (see e.g. SpeedStep), I use this one:

Install cpufrequtils

# pacman -S cpufrequtils

Edit /etc/conf.d/cpufreq (Maximum frequency of my processor is 1.5GHz although the sticker on the laptop was saying "1.6Ghz". Strange. Check yours, maybe I have some weird "edition"...)

#configuration for cpufreq control

# valid governors:
#  ondemand, performance, powersave,
#  conservative, userspace

# valid suffixes: Hz, kHz (default), MHz, GHz, THz

Load the speedstep_centrino module using modprobe. Alternatively, you can add it to the MODULES list in /etc/rc.conf to load it at boot time. Don't forget to add cpufreq to the DAEMONS array.

DAEMONS=(syslog-ng @network netfs crond @hal fam @ifplugd cpufreq firestarter alsa gdm)


synaptics touchpad... todo

Section "InputDevice"
 	Identifier    "Mouse1"
        Driver        "synaptics"
 	Option        "Device"        "/dev/psaux"
 	Option        "Protocol"      "auto-dev"
 	Option        "LeftEdge"      "1700"
 	Option        "RightEdge"     "5300"
 	Option        "TopEdge"       "1700"
 	Option        "BottomEdge"    "4200"
 	Option        "FingerLow"     "25"
 	Option        "FingerHigh"    "30"
 	Option        "MaxTapTime"    "180"
 	Option        "MaxTapMove"    "220"
 	Option        "VertScrollDelta" "100"
 	Option        "MinSpeed"      "0.06"
 	Option        "MaxSpeed"      "0.12"
 	Option        "AccelFactor" "0.0010"
 	Option        "SHMConfig"     "true"
#  	Option        "Repeater"      "/dev/ps2mouse"

To use this you'll need to change your InputDevice line in your "ServerLayout" section to use the synaptics mouse....todo...

External Resources