Acer Aspire 8920G
This is my 1st ever wiki and I hope that by writing this it can benefit another user out there to setup archlinux on their laptop like me. I should also like to explain that I am a novice in the World of Linux and so I shall try and pass on as much knowledge as I possibly can. These are the settings that apply to my machine and my network setup so you must remember that what works for me will not necessarily work ok for you. This machine is running 2.6.31-ARCH and all the hardware is ok other than having to load the wireless driver iwl4965 and nvidia everything else just worked from the core install.
Template:Hardware Template:Hardware Template:Hardware Template:Hardware Template:Hardware Template:Hardware Template:Hardware Template:Hardware Template:Hardware Template:Hardware Template:Hardware Template:Hardware
System Files and Command Outputs
This contains the commands to connect to my Buffalo NAS drive, which I have added incase it helps someone else with one. I connect to the drive which is on a static IP address and has no security set for the shares, so in your case connecting up to your own network shares would of course differ from mine. Template:File
This contains the settings I used that apply to my machine and my network, so your rc.conf will be different to mine. Template:File
These are some of the things I needed to download and the configuration files that needed modifying in order to configure the machine to behave as a laptop should... be wireless and consume less power! I assume by this point that you have already got to the stage of a working desktop and just need to dot the i's and cross the t's to polish things off.
Wireless needs the module "iwlwifi-4965-ucode" installing, and if you use wireless security WPA2 etc then you would also be better to load "wicd" to configure and connect to your wireless.
First you need to install "iwlwifi-4965-ucode" Template:Command
Then you need to edit /etc/rc.conf to load the module at startup. Template:Command
Stage two involves getting connected to our wireless network via wicd, so let's install that now. Template:Command
Then you need to edit /etc/rc.conf to load the wicd daemon at startup. If you put a bang(!) in front of a network interface then you are allowing wicd to control the interface. The Interfaces and Routes are optional but you will need to load the Daemon. Template:Command