Difference between revisions of "Acer Aspire One AOD150"

From ArchWiki
Jump to navigation Jump to search
m (Ethernet)
Line 67: Line 67:
In all other respects, the touchpad can be configured using the standard [[Touchpad Synaptics]] wiki.
In all other respects, the touchpad can be configured using the standard [[Touchpad Synaptics]] wiki.
The Attansic Ethernet controller can be loaded manually by adding the '''r8169''' kernel driver to the MODULES array in '''/etc/rc.conf'''.

Revision as of 18:25, 29 March 2009


This article pertains to the 10.1" Acer Aspire One AOD150 models made available in February 2009. At this time, the AOD150 series feature standard SATA hard drives only, therefore much of the information found in the Acer Aspire One article does not apply. This article attempts to trim the fat.

Hardware Specifications

The AOD150 series netbook is known to be available in the following configuration:

Base Components

  • Intel® Atom processor
    • N270 (1.6GHz/533MHz FSB/512KB L2 Cache)
  • Mobile Intel® 945GSE Express Chipset
  • 1GB 533MHz DDR2 SDRAM Memory
  • 10.1" Widescreen Display
    • WSVGA 1024x600 with CrystalBrite™
  • Intel® GMA 950 Graphics
  • 160GB 5400RPM SATA Hard Disk
  • Microdia® Integrated Webcam
  • Attansic® L1E 10/100 Ethernet
  • Atheros® AR242x 802.11abg Wireless
  • Intel® 82801G (ICH7 Family) HD Audio
  • Multi-card Reader (SD/MMC/RS-MMC/MS/MS Pro/xD)
  • 3 USB 2.0 Ports
  • Synaptics® touchpad with scroll zones
  • External VGA Port
  • Integrated Digital Microphone
  • Red items have yet to be covered in detail and require a wiki entry

Arch Installation

There are plenty of resources available to help new users install and configure a basic Arch Linux installation, including the Official Installation Guide and the Beginners Guide.

The obvious consideration for netbooks in general is the lack of CD/DVD drives. Unless you are using an external optical drive you'll want to stick to the USB image of the Arch snapshots.

The following tips are specific to the Acer Aspire One (also referred as the AAO or AA1) and may be of some help during installation.

If a broadband Internet connection is available it is highly recommended that Arch be installed with the smaller FTP image. If you plan to have a desktop environment (KDE, GNOME, etc) then the majority of the packages you require will come from the Internet repositories and not the Arch USB itself. This method will get you up and running in the shortest amount of time. Simply download the FTP USB image, write to a USB drive and restart your computer.

The following steps assume you are connected to the Internet with a wired Ethernet connection.

Hardware Configuration

Kernel Drivers

The following kernels drivers are necessary to get all of the various hardware working. All of these modules should load automatically without adding them to /etc/rc.conf:

  • atl1e - Ethernet
  • ath5k - Wireless
  • uvcvideo - Webcam
  • snd_hda_intel - Audio


Many of the Function hotkeys are controlled via hardware/BIOS and do not require user configuration:

  • LCD Toggle (Fn+F6)
  • LCD Brightness (Fn+Left / Fn+Right)
  • Touchpad Toggle (Fn+F7)
  • Wireless Kill-switch (dedicated)

The remaining hotkeys can be configured easily with utilities (such as xbindkeys):

  • Volume Up/Down (Fn+Up / Fn+Down)
  • Mute (Fn+F8)
  • Standby (Fn+F4)


The Synaptics touchpad is sometimes disabled by default, following a fresh installation. If unresponsive, try pressing the touchpad toggle hotkeys (Fn+F7).

In all other respects, the touchpad can be configured using the standard Touchpad Synaptics wiki.


The Atheros A/B/G wireless adaptor uses the standard ath5k module, which can be added to the MODULES array in /etc/rc.conf if desired.


The Microdia webcam uses the standard USB Video Class kernel driver. To load manually, add uvcvideo to the MODULES array in /etc/rc.conf.