Difference between revisions of "Acer Aspire TimelineX 4820TG"

From ArchWiki
Jump to: navigation, search
m (Switchable Graphics: fix link)
(Sensors: remove useless output)
Line 111: Line 111:
[[Install]] {{Pkg|lm_sensors}}.
[arp@arpc ~]$ sudo modprobe coretemp
[arp@arpc ~]$ sensors
Adapter: Virtual device
temp1:        +53.0°C  (crit = +105.0°C)
Adapter: PCI adapter
temp1:      +2147355.6°C 
Adapter: ISA adapter
Core 0:      +49.0°C  (high = +95.0°C, crit = +105.0°C)
Adapter: ISA adapter
Core 2:      +53.0°C  (high = +95.0°C, crit = +105.0°C)
==Synaptics Touchpad==
==Synaptics Touchpad==
See [[Touchpad Synaptics]].
See [[Touchpad Synaptics]].

Revision as of 13:53, 20 January 2018

Tango-edit-clear.pngThis article or section needs language, wiki syntax or style improvements. See Help:Style for reference.Tango-edit-clear.png

Reason: Does not comply with Help:Style and Category:Laptops guidelines. (Discuss in Talk:Acer Aspire TimelineX 4820TG#)

Acer Aspire TimelineX 4820TG is a 14-inch laptop that packs in an Intel Core i5-430M processor and dedicated ATI Radeon HD 5650 graphics, making it a powerful 14-inch laptop. ArchLinux works mostly works out of box, but there are few tweaks required to make the hardware fully compatible with ArchLinux.


Make sure that you have BIOS_Acer_1.25_A_A.zip installed.

PowerSmart / Battery Optimization

Switchable Graphics

This laptop contains inbuilt Intel HD & Radeon 5650 graphics adapters. The Intel HD graphics adapter is optimized for low power consumption which Radeon 5650 consumes high power.

To use Linux kernel's "Laptop Hybrid Graphics - GPU switching support" add following to /etc/fstab

none            /sys/kernel/debug debugfs defaults 0 0

This will enable /sys/kernel/debug/vgaswitcheroo/switch

[root@arp arp]# cat /sys/kernel/debug/vgaswitcheroo/switch
1:DIS: :Pwr:0000:01:00.0

IDN - denotes integrated Intel graphics. DIS - denotes discrete Radeon graphics.

To switch-off Radeon, do following -

[root@arp arp]# echo "DIGD" > /sys/kernel/debug/vgaswitcheroo/switch
[root@arp arp]# echo "OFF"  > /sys/kernel/debug/vgaswitcheroo/switch
[root@arp arp]# cat /sys/kernel/debug/vgaswitcheroo/switch
1:DIS: :Off:0000:01:00.0

To switch-on both graphics chips, do following -

[root@arp arp]# echo "DIGD" > /sys/kernel/debug/vgaswitcheroo/switch
[root@arp arp]# echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch

Init script for switching off the Radeon card -

Note: There is now a vgaswitcheroo systemd service which should be used instead
[root@arp arp]# cat /etc/rc.d/radeon_off 


. /etc/rc.conf
. /etc/rc.d/functions

case "$1" in

   echo "DIGD" > /sys/kernel/debug/vgaswitcheroo/switch
   echo "OFF"  > /sys/kernel/debug/vgaswitcheroo/switch

   echo "DIGD" > /sys/kernel/debug/vgaswitcheroo/switch
   echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch

     stat_busy "Restarting radeon_off ..."
     $0 stop
     $0 start

     echo "usage: $0 {start|stop|restart}"

[root@arp arp]# chmod +x /etc/rc.d/radeon_off 

Switch the Radeon off while booting. Add following at the end of the file : /etc/rc.sysinit

#Switch-off discrete graphics
/etc/rc.d/radeon_off restart

/bin/dmesg >| /var/log/dmesg.log

Enable CPU Frequency Scaling

Enabled by default, see CPU frequency scaling for details.

Power Usage

The power rating before tweak -

Power usage (ACPI estimate): 24.1W (2.8 hours)

The power rating after "switching off the radeon graphics" and "enabling laptop-mode tools".

Power usage (ACPI estimate): 11.1W (6.5 hours)


Install lm_sensors.

Synaptics Touchpad

See Touchpad Synaptics.