Difference between revisions of "Acer TimelineX"

From ArchWiki
Jump to: navigation, search
(added lots of Filename, Codeline, Package, etc. formatting; replaced really old kernel module blacklisting section; fixed tons of grammar mistakes)
(8 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
{{out of date}}
 
{{out of date}}
[[Category: Acer (English)]]
+
[[Category:Acer]]
  
 
Hardware is a 4820TG/5820TG, but should be similar for all these laptops.
 
Hardware is a 4820TG/5820TG, but should be similar for all these laptops.
Line 36: Line 36:
 
  pacman -S xf86-video-ati xf86-video-intel
 
  pacman -S xf86-video-ati xf86-video-intel
  
While installing Arch Linux, you should disable the {{Codeline|radeon}} kernel module, otherwise you may encounter kernel crash during booting. See [[Kernel_modules#Blacklisting]] for instructions.
+
While installing Arch Linux, you should disable the {{Ic|radeon}} kernel module, otherwise you may encounter kernel crash during booting. See [[Kernel_modules#Blacklisting]] for instructions.
  
If you need to use {{Codeline|radeon}} and HDMI, you can manually enable it by executing
+
If you need to use {{Ic|radeon}} and HDMI, you can manually enable it by executing
 
  modprobe radeon
 
  modprobe radeon
  
Kernel message with respect to {{Codeline|radeon}} is as follows -
+
TimelineX 4820TG is having switchable graphics. To disable switchable graphics, add following to {{ic|/etc/modprobe.d/radeon.conf}}  
<pre>
+
pci 0000:01:00.0: setting latency timer to 64
+
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 1
+
[drm] Module unloaded
+
[drm] radeon kernel modesetting enabled.
+
VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
+
radeon 0000:01:00.0: setting latency timer to 64
+
[drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1).
+
[drm] register mmio base: 0xDC400000
+
[drm] register mmio size: 131072
+
vga_switcheroo: enabled
+
radeon atpx: version is 1
+
ATOM BIOS: Acer
+
radeon 0000:01:00.0: VRAM: 1024M 0x00000000 - 0x3FFFFFFF (1024M used)
+
radeon 0000:01:00.0: GTT: 512M 0x40000000 - 0x5FFFFFFF
+
mtrr: no more MTRRs available
+
[drm] Detected VRAM RAM=1024M, BAR=128M
+
[drm] RAM width 128bits DDR
+
[TTM] Zone  kernel: Available graphics memory: 1859316 kiB.
+
[TTM] Initializing pool allocator.
+
[drm] radeon: 1024M of VRAM memory ready
+
[drm] radeon: 512M of GTT memory ready.
+
radeon 0000:01:00.0: irq 44 for MSI/MSI-X
+
radeon 0000:01:00.0: radeon: using MSI.
+
[drm] radeon: irq initialized.
+
[drm] GART: num cpu pages 131072, num gpu pages 131072
+
[drm] Loading REDWOOD Microcode
+
[drm] ring test succeeded in 1 usecs
+
[drm] radeon: ib pool ready.
+
do_IRQ: 3.137 No irq handler for vector (irq -1)
+
[drm] ib test succeeded in 0 usecs
+
[drm] Radeon Display Connectors
+
[drm] Connector 0:
+
[drm]  LVDS
+
[drm]  DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
+
[drm]  Encoders:
+
[drm]    LCD1: INTERNAL_UNIPHY
+
[drm] Connector 1:
+
[drm]  HDMI-A
+
[drm]  HPD1
+
[drm]  DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
+
[drm]  Encoders:
+
[drm]    DFP1: INTERNAL_UNIPHY1
+
[drm] Connector 2:
+
[drm]  VGA
+
[drm]  DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
+
[drm]  Encoders:
+
[drm]    CRT1: INTERNAL_KLDSCP_DAC1
+
[drm] Internal thermal controller with fan control
+
[drm] radeon: power management initialized
+
[drm] fb mappable at 0xD0140000
+
[drm] vram apper at 0xD0000000
+
[drm] size 4325376
+
[drm] fb depth is 24
+
[drm]    pitch is 5632
+
fb1: radeondrmfb frame buffer device
+
[drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 1
+
</pre>
+
 
+
TimelineX 4820TG is having switchable graphics. To disable switchable graphics, add following to {{Filename|/etc/modprobe.d/radeon.conf}}  
+
 
  options radeon modeset=0
 
  options radeon modeset=0
  
 
For more information, check [[Intel]] and [[ATI]].
 
For more information, check [[Intel]] and [[ATI]].
 
=== Experimental open source drivers ===
 
These drivers are unstable. If you are not an experienced linux user please do not try this drivers, they would eat your hamster.
 
 
==== Classic mesa ====
 
All support for evergreen cards is in master branch already.
 
yaourt -S xf86-video-ati-git
 
yaourt -S mesa-git
 
 
Pros: There is 2D and 3D available
 
 
Cons: Full of bugs; not developed actively
 
 
{{Note|AUR helpers like {{Package AUR|yaourt}} are not supported by the Arch Linux developers, so use this at your own risk!}}
 
 
==== Gallium ====
 
Gallium support is in r600g and i965g modules.
 
 
Pros: They work pretty well
 
 
Cons: Difficult to set up. Needs latest kernel.
 
  
 
=== Closed Catalyst drivers ===
 
=== Closed Catalyst drivers ===
Line 132: Line 51:
 
Since Catalyst cannot handle switchable graphics cards, you have to disable the Intel card from the BIOS. At least with BIOS v.1.19 you can do that by changing VGA mode to "Discrete".
 
Since Catalyst cannot handle switchable graphics cards, you have to disable the Intel card from the BIOS. At least with BIOS v.1.19 you can do that by changing VGA mode to "Discrete".
  
If you use the stock kernel you can install Catalyst with the AUR packages {{Package AUR|catalyst-utils}} and {{Package AUR|catalyst}}. If you have a 64-bit system and you want to use 3D acceleration also in 32-bit games, you should also install {{Package AUR|lib32-catalyst-utils}}. These packages are also available for download from a third-party repository, see the [https://wiki.archlinux.org/index.php/ATI_Catalyst ATI Catalyst] wiki page. Note that installing these packages will make you remove the open source video drivers.
+
If you use the stock kernel you can install Catalyst with the AUR packages {{AUR|catalyst-utils}} and {{AUR|catalyst}}. If you have a 64-bit system and you want to use 3D acceleration also in 32-bit games, you should also install {{AUR|lib32-catalyst-utils}}.  
 
+
After installing package you probably need to configure [[Xorg]]. Using the provided '''aticonfig''' tool is recommended:
+
<pre>
+
# aticonfig --initial
+
(or for Dual Head: # aticonfig --initial=dual-head)
+
# aticonfig -v
+
</pre>
+
 
+
Catalyst does not support KMS, so you should add {{Codeline|nomodeset}} to your kernel line in {{Filename|/boot/grub/menu.lst}}, like this:
+
kernel /boot/vmlinuz26 root=/dev/sda1 ro nomodeset
+
 
+
It is also recommended (but not strictly necessary) to add {{Codeline|fglrx}} to the {{Codeline|MODULES}} array in {{Filename|/etc/rc.conf}}.
+
  
You may now reboot your system.
+
See the [[AMD Catalyst]] wiki page for third-party repository and configuration after install.
  
 
=== Switchable Graphics ===
 
=== Switchable Graphics ===
Line 153: Line 60:
 
You must have debugfs mounted for the switch access:
 
You must have debugfs mounted for the switch access:
 
  # mount -t debugfs debugfs /sys/kernel/debug
 
  # mount -t debugfs debugfs /sys/kernel/debug
or add following to {{Filename|/etc/fstab}}:
+
or add following to {{ic|/etc/fstab}}:
 
  debugfs /sys/kernel/debug debugfs 0 0
 
  debugfs /sys/kernel/debug debugfs 0 0
  
Line 176: Line 83:
 
</pre>
 
</pre>
  
You may also [http://linux-hybrid-graphics.blogspot.com/2010/07/using-acpicall-module-to-switch-onoff.html use acpi_call module] to switch graphics. There is a package in the [[AUR]] named {{Package AUR|acpi_call-git}}.
+
You may also [http://linux-hybrid-graphics.blogspot.com/2010/07/using-acpicall-module-to-switch-onoff.html use acpi_call module] to switch graphics. There is a package in the [[AUR]] named {{AUR|acpi_call-git}}.
  
 
By doing the following, my TimelineX 4820TG laptop's battery life got improved significantly (now it gives 5+ hours on average .. with laptop-mode customization and radeon switchoff) -  
 
By doing the following, my TimelineX 4820TG laptop's battery life got improved significantly (now it gives 5+ hours on average .. with laptop-mode customization and radeon switchoff) -  
Line 193: Line 100:
 
  pacman -S xf86-input-synaptics
 
  pacman -S xf86-input-synaptics
  
Then add to {{Filename|/etc/X11/xorg.conf.d/}} a new file (name it {{Filename|20-synaptics.conf}})
+
Then add to {{ic|/etc/X11/xorg.conf.d/}} a new file (name it {{ic|20-synaptics.conf}})
  
 
<pre>Section "InputClass"
 
<pre>Section "InputClass"
Line 215: Line 122:
  
 
=== Keyboard ===
 
=== Keyboard ===
Add a new file in {{Filename|/etc/X11/xorg.conf.d/}} (name it {{Filename|20-keymap.conf}})
+
Add a new file in {{ic|/etc/X11/xorg.conf.d/}} (name it {{ic|20-keymap.conf}})
 
<pre>Section "InputClass"
 
<pre>Section "InputClass"
 
         Identifier "Acer Keyboard"
 
         Identifier "Acer Keyboard"
Line 240: Line 147:
 
  pacman -S laptop-mode-tools
 
  pacman -S laptop-mode-tools
  
You need to enable these modules in {{Filename|/etc/laptop-mode/conf.d/}}
+
You need to enable these modules in {{ic|/etc/laptop-mode/conf.d/}}
  
 
'''auto-hibernate.conf''' Hibernate when battery level becomes critical
 
'''auto-hibernate.conf''' Hibernate when battery level becomes critical
  
 
'''cpufreq.conf''' Adjust CPU speed
 
'''cpufreq.conf''' Adjust CPU speed
 
Add acpi_cpufreq, cpufreq_ondemand and cpufreq_powersave to the {{Codeline|MODULES}} array in {{Filename|/etc/rc.conf}}.
 
  
 
'''dpms-standby.conf''' Turn off screen when not needed
 
'''dpms-standby.conf''' Turn off screen when not needed
Line 258: Line 163:
 
'''lcd-brightness.conf''' Change brightness when on battery
 
'''lcd-brightness.conf''' Change brightness when on battery
  
The file is called {{Filename|/proc/acpi/video/GFX0/DD02/brightness}} and acceptable values are 10..100 with a step of 10
+
The file is called {{ic|/proc/acpi/video/GFX0/DD02/brightness}} and acceptable values are 10..100 with a step of 10
  
 
'''sched-mc-power-savings.conf''' Additional CPU powersave features
 
'''sched-mc-power-savings.conf''' Additional CPU powersave features
Line 272: Line 177:
 
== Hardware ==
 
== Hardware ==
 
=== Bluetooth ===
 
=== Bluetooth ===
Works out of the box. On some machines, Bluetooth cannot turn on because of {{Keypress|Fn}}+{{Keypress|F3}} switching only WLAN. [http://ubuntuforums.org/showpost.php?p=10021228&postcount=183 Fixed DSDT table] seems to solve the problem.
+
Works out of the box. On some machines, Bluetooth cannot turn on because of {{ic|Fn}}+{{ic|F3}} switching only WLAN. [http://ubuntuforums.org/showpost.php?p=10021228&postcount=183 Fixed DSDT table] seems to solve the problem.
  
On the 3820TG, Bluetooth might not work even if {{Keypress|Fn}}+{{Keypress|F3}} is used to turn it on. (Symptoms include "usb disconnect" messages in dmesg, and the adapter not showing up in ''hcitool dev''.)
+
On the 3820TG, Bluetooth might not work even if {{ic|Fn}}+{{ic|F3}} is used to turn it on. (Symptoms include "usb disconnect" messages in dmesg, and the adapter not showing up in ''hcitool dev''.)
In this case, copying {{Filename|/lib/firmware/ath3k-2.fw}} to {{Filename|/lib/firmware/ath3k-1.fw}} helps, see [http://www.mail-archive.com/ubuntu-bugs@lists.ubuntu.com/msg2579867.html this mailing list thread]. If it does not work for you, please change this note!
+
In this case, copying {{ic|/lib/firmware/ath3k-2.fw}} to {{ic|/lib/firmware/ath3k-1.fw}} helps, see [http://www.mail-archive.com/ubuntu-bugs@lists.ubuntu.com/msg2579867.html this mailing list thread]. If it does not work for you, please change this note!
  
 
=== Wi-Fi ===
 
=== Wi-Fi ===
Line 281: Line 186:
  
 
==== TimelineX 5820 ====  
 
==== TimelineX 5820 ====  
Wi-Fi driver needs to be installed. Open source {{Package AUR|brcm80211}} driver causes kernel panics; the proprietary [[Broadcom_wireless#broadcom-wl|broadcom-wl]] driver works fine.
+
Wi-Fi driver needs to be installed. Open source {{AUR|brcm80211}} driver causes kernel panics; the proprietary [[Broadcom_wireless#broadcom-wl|broadcom-wl]] driver works fine.
  
 
==== TimelineX 4820TG ====  
 
==== TimelineX 4820TG ====  
Wi-Fi driver does not work by default. You need to install {{Package AUR|broadcom-wl}} and {{Package AUR|b43-firmware}}.  
+
Wi-Fi driver does not work by default. You need to install {{AUR|broadcom-wl}} and {{AUR|b43-firmware}}.  
# aurget --deps -Sy broadcom-wl
+
# aurget --deps -Sy b43-firmware
+
  
Once you are done with driver and firmware installation, you need to add the following in the {{Codeline|MODULES}} array in {{Filename|/etc/rc.conf}} and reboot:
+
Once you are done with driver and firmware installation, you need to add the following in the {{Ic|MODULES}} array in {{ic|/etc/rc.conf}} and reboot:
 
  MODULES=([...] lib80211 wl !b43 !ssb)
 
  MODULES=([...] lib80211 wl !b43 !ssb)
  
Line 299: Line 202:
 
For more information, check [[Broadcom_wireless]].
 
For more information, check [[Broadcom_wireless]].
  
Sometimes, the network (LAN/WLAN) interface names get swapped with every boot. To make the network interface name(s) stay constant, add the following to {{Filename|/etc/udev/rules.d/10-network.rules}} and bind the MAC address of each of your network interfaces to a certain interface name:
+
Sometimes, the network (LAN/WLAN) interface names get swapped with every boot. To make the network interface name(s) stay constant, add the following to {{ic|/etc/udev/rules.d/10-network.rules}} and bind the MAC address of each of your network interfaces to a certain interface name:
 
  SUBSYSTEM=="net", ATTR{address}=="aa:bb:cc:dd:ee:ff", NAME="eth0"
 
  SUBSYSTEM=="net", ATTR{address}=="aa:bb:cc:dd:ee:ff", NAME="eth0"
 
  SUBSYSTEM=="net", ATTR{address}=="ff:ee:dd:cc:bb:aa", NAME="wlan0"
 
  SUBSYSTEM=="net", ATTR{address}=="ff:ee:dd:cc:bb:aa", NAME="wlan0"
Line 309: Line 212:
  
 
==== TimelineX 3820TG ====
 
==== TimelineX 3820TG ====
Works out of the box, {{Codeline|lspci}} lists the chip as
+
Works out of the box, {{Ic|lspci}} lists the chip as
 
  05:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (rev 01)
 
  05:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (rev 01)
  
Line 319: Line 222:
  
 
=== Display brightness control ===
 
=== Display brightness control ===
Sometimes brightness control for integrated card does not work (at least with the 2.6.36.2-1 kernel). You may add {{Codeline|acpi_osi<nowiki>=</nowiki>Linux}} to the kernel line in the [[GRUB]] config to fix this.
+
Sometimes brightness control for integrated card does not work (at least with the 2.6.36.2-1 kernel). You may add {{Ic|acpi_osi<nowiki>=</nowiki>Linux}} to the kernel line in the [[GRUB]] config to fix this.
  
 
== Info ==
 
== Info ==

Revision as of 10:50, 1 September 2013

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: please use the first argument of the template to provide a brief explanation. (Discuss in Talk:Acer TimelineX#)

Hardware is a 4820TG/5820TG, but should be similar for all these laptops.

Device Status Modules
Intel Working xf86-video-intel
Ati Partially Working xf86-video-ati
Ati Working fglrx
Bluetooth Working bluetooth
Ethernet Working atl1c (2.6.36)
Wireless Working ath9k / wl
Wireless Working bcm4357 / wl
Audio Working snd_hda_intel
Camera Working uvcvideo
Card Reader Working
Function Keys Working

Installation

There is a quirk if you want to install Arch Linux. You need to connect via wireless, as Ethernet hardware is supported only by Linux kernel 2.6.34 and higher. Follow the Beginners' Guide for the rest.

Xorg

Open source drivers

You need ati and i915 xorg drivers:

pacman -S xf86-video-ati xf86-video-intel

While installing Arch Linux, you should disable the radeon kernel module, otherwise you may encounter kernel crash during booting. See Kernel_modules#Blacklisting for instructions.

If you need to use radeon and HDMI, you can manually enable it by executing

modprobe radeon

TimelineX 4820TG is having switchable graphics. To disable switchable graphics, add following to /etc/modprobe.d/radeon.conf

options radeon modeset=0

For more information, check Intel and ATI.

Closed Catalyst drivers

Catalyst (also known as fglrx) is a closed source graphics driver provided by ATI. It does not support certain features that the open source drivers do, but it has fully working, fast 3D acceleration. This is working at least with Acer Aspire TimelineX 3820TG that has ATI Mobility Radeon HD 5650.

Since Catalyst cannot handle switchable graphics cards, you have to disable the Intel card from the BIOS. At least with BIOS v.1.19 you can do that by changing VGA mode to "Discrete".

If you use the stock kernel you can install Catalyst with the AUR packages catalyst-utilsAUR and catalystAUR. If you have a 64-bit system and you want to use 3D acceleration also in 32-bit games, you should also install lib32-catalyst-utilsAUR.

See the AMD Catalyst wiki page for third-party repository and configuration after install.

Switchable Graphics

Switching video cards works with the open source graphics driver.

You must have debugfs mounted for the switch access:

# mount -t debugfs debugfs /sys/kernel/debug

or add following to /etc/fstab:

debugfs /sys/kernel/debug debugfs 0 0

Make sure that your radeon driver is loaded:

modprobe radeon

Then you can use the following commands:

#Check current status:
cat /sys/kernel/debug/vgaswitcheroo/switch

#Enable ATI
echo DDIS > /sys/kernel/debug/vgaswitcheroo/switch

#Enable Intel
echo DIGD > /sys/kernel/debug/vgaswitcheroo/switch

#Power off unused card
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch

#Power on unused card
echo ON > /sys/kernel/debug/vgaswitcheroo/switch

You may also use acpi_call module to switch graphics. There is a package in the AUR named acpi_call-gitAUR.

By doing the following, my TimelineX 4820TG laptop's battery life got improved significantly (now it gives 5+ hours on average .. with laptop-mode customization and radeon switchoff) -

#mount -t debugfs none /sys/kernel/debug
#modprobe radeon
#echo ON > /sys/kernel/debug/vgaswitcheroo/switch
#echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
#cat /sys/kernel/debug/vgaswitcheroo/switch
0:+:Pwr:0000:00:02.0
1: :Off:0000:01:00.0

Touchpad

Touchpad is a synaptics so you need its driver:

pacman -S xf86-input-synaptics

Then add to /etc/X11/xorg.conf.d/ a new file (name it 20-synaptics.conf)

Section "InputClass"
 Identifier "touchpad"
 Driver "synaptics"
 MatchIsTouchpad "on"
 Option "SHMConfig" "on"
 Option "TapButton1" "1"
 Option "TapButton2" "2"
 Option "TapButton3" "3"
 Option "VertEdgeScroll" "on"
 Option "VertTwoFingerScroll" "on"
 Option "HorizEdgeScroll" "on"
 Option "HorizTwoFingerScroll" "on"
 Option "CircularScrolling" "on"
 Option "CircScrollTrigger" "2"
 Option "EmulateTwoFingerMinZ" "0"
EndSection

For more info, check Touchpad_Synaptics.

Keyboard

Add a new file in /etc/X11/xorg.conf.d/ (name it 20-keymap.conf)

Section "InputClass"
        Identifier "Acer Keyboard"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Option                 "XkbLayout" "it"
        Option                 "XkbModel" "acer_laptop"
        Driver "evdev"
EndSection

Replace it with your keymap.

ACPI

ACPI works with BIOS v1.18 and higher.

BIOS v1.19 for 4820tg

BIOS v1.19 for 3820tg

If you do not have Windows installed, you can flash with a FreeDOS thumb drive.

Laptop Mode Tools

Install laptop-mode-tools

pacman -S laptop-mode-tools

You need to enable these modules in /etc/laptop-mode/conf.d/

auto-hibernate.conf Hibernate when battery level becomes critical

cpufreq.conf Adjust CPU speed

dpms-standby.conf Turn off screen when not needed

ethernet.conf Turn off ethernet when on battery

intel-hda-powersave.conf Turn on powersaving for audio chip

intel-sata-powermgmt.conf Powersave for hard disk

lcd-brightness.conf Change brightness when on battery

The file is called /proc/acpi/video/GFX0/DD02/brightness and acceptable values are 10..100 with a step of 10

sched-mc-power-savings.conf Additional CPU powersave features

sched-smt-power-savings.conf Additional CPU powersave features

usb-autosuspend.conf Suspend unused USB devices

video-out.conf Disable video out on battery

wireless-power.conf Powersaving for atheros chip

Hardware

Bluetooth

Works out of the box. On some machines, Bluetooth cannot turn on because of Fn+F3 switching only WLAN. Fixed DSDT table seems to solve the problem.

On the 3820TG, Bluetooth might not work even if Fn+F3 is used to turn it on. (Symptoms include "usb disconnect" messages in dmesg, and the adapter not showing up in hcitool dev.) In this case, copying /lib/firmware/ath3k-2.fw to /lib/firmware/ath3k-1.fw helps, see this mailing list thread. If it does not work for you, please change this note!

Wi-Fi

Works out of the box and supports injection and AP mode.

TimelineX 5820

Wi-Fi driver needs to be installed. Open source brcm80211AUR driver causes kernel panics; the proprietary broadcom-wl driver works fine.

TimelineX 4820TG

Wi-Fi driver does not work by default. You need to install broadcom-wlAUR and b43-firmwareAUR.

Once you are done with driver and firmware installation, you need to add the following in the MODULES array in /etc/rc.conf and reboot:

MODULES=([...] lib80211 wl !b43 !ssb)

Once rebooted, you can confirm the working of the driver by following commands

# ip link
# ip link set eth1 up
# iwconfig eth1
# iwlist eth1 scan

For more information, check Broadcom_wireless.

Sometimes, the network (LAN/WLAN) interface names get swapped with every boot. To make the network interface name(s) stay constant, add the following to /etc/udev/rules.d/10-network.rules and bind the MAC address of each of your network interfaces to a certain interface name:

SUBSYSTEM=="net", ATTR{address}=="aa:bb:cc:dd:ee:ff", NAME="eth0"
SUBSYSTEM=="net", ATTR{address}=="ff:ee:dd:cc:bb:aa", NAME="wlan0"

Where:

  • "eth0" is the name of LAN interface.
  • "wlan0" is the name of WLAN interface.
  • MAC address of each interface should be specified in lower-case. See the udev page for more information.

TimelineX 3820TG

Works out of the box, lspci lists the chip as

05:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (rev 01)

Camera

Works out of the box.

Card Reader

Works out of the box, tested with a SD card.

Display brightness control

Sometimes brightness control for integrated card does not work (at least with the 2.6.36.2-1 kernel). You may add acpi_osi=Linux to the kernel line in the GRUB config to fix this.

Info

lspci

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev ff)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc Device 68e0 (rev ff)
01:00.1 Audio device: ATI Technologies Inc Device aa68 (rev ff)
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

lspci - TimelineX 4820TG (with Broadcom 4357 wifi)

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
03:00.0 Network controller: Broadcom Corporation Device 4357 (rev 01)
7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

lspci - TimelineX 3820TG-5464G50iks

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
02:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series] (rev ff)
02:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series] (rev ff)
03:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
05:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

Issues

ATI chip has no 3D acceleration.

Ethernet chip driver is buggy in the 2.6.35 kernel.

Links

  1. Ubuntu-it thread
  2. Usind acpi_call module to switch on/off