Difference between revisions of "Advanced Linux Sound Architecture"

From ArchWiki
Jump to: navigation, search
m (Using a USB Headset and External USB Sound Cards: add templates)
m (Set the default sound card)
(39 intermediate revisions by 17 users not shown)
Line 15: Line 15:
 
[[tr:Gelişmiş_ses_mimarisi_(ALSA)]]
 
[[tr:Gelişmiş_ses_mimarisi_(ALSA)]]
 
[[zh-CN:Advanced Linux Sound Architecture]]
 
[[zh-CN:Advanced Linux Sound Architecture]]
The [[Wikipedia:Advanced Linux Sound Architecture|Advanced Linux Sound Architecture]] ('''ALSA''') is a Linux kernel component intended to replace the original Open Sound System (OSSv3) for providing device drivers for sound cards. Besides the sound device drivers, '''ALSA''' also bundles a user space library for application developers who want to use driver features with a higher level API than direct interaction with the kernel drivers.
+
The [[Wikipedia:Advanced Linux Sound Architecture|Advanced Linux Sound Architecture]] ('''ALSA''') is a Linux kernel component which replaced the original Open Sound System (OSSv3) for providing device drivers for sound cards. Besides the sound device drivers, '''ALSA''' also bundles a user space library for application developers who want to use driver features with a higher level API than direct interaction with the kernel drivers.
  
 
{{Note|For an alternative sound environment, see the [[Open Sound System]] page.}}
 
{{Note|For an alternative sound environment, see the [[Open Sound System]] page.}}
Line 31: Line 31:
 
[[udev]] will automatically probe your hardware at boot, loading the corresponding kernel module for your audio card. Therefore, your sound should already be working, but upstream sources mute all channels by default.
 
[[udev]] will automatically probe your hardware at boot, loading the corresponding kernel module for your audio card. Therefore, your sound should already be working, but upstream sources mute all channels by default.
  
Users must be in the audio [[Users and Groups|group]] to play sound with ALSA. To add a user to the audio group, use the following command:
+
Users with a local login (at a virtual terminal or a display manager) have permission to play audio and change mixer levels. To allow this for a remote login, the user has to be [[Users and Groups#Group management|added]] to the {{ic|audio}} group. Membership in the {{ic|audio}} group also allows direct access to devices, which can lead to applications grabbing exclusive output (breaking software mixing) and breaks fast-user-switching, and multiseat.
{{bc|# gpasswd -a ''yourusername'' audio}}
+
 
+
{{Note|This will not take effect until the user logs back in.}}
+
  
 
===User-space utilities===
 
===User-space utilities===
Line 46: Line 43:
 
The current version of ALSA installs with all channels '''muted by default'''. You will need to unmute the channels manually.
 
The current version of ALSA installs with all channels '''muted by default'''. You will need to unmute the channels manually.
  
It is easiest to use {{ic|alsamixer}} ncurses UI to accomplish this (alternatively, use amixer from the commandline):
+
It is easiest to use {{ic|alsamixer}} ncurses UI to accomplish this:
{{bc|$ alsamixer}}
+
 
 +
$ alsamixer
 +
 
 +
Alternatively, use {{ic|amixer}} from the command-line:
 +
 
 +
$ amixer sset Master unmute
  
 
The label {{ic|MM}} below a channel indicates that the channel is muted, and {{ic|00}} indicates that it is open.
 
The label {{ic|MM}} below a channel indicates that the channel is muted, and {{ic|00}} indicates that it is open.
Line 64: Line 66:
 
Next, test to see if sound works:
 
Next, test to see if sound works:
  
{{bc|$ speaker-test -c 2}}
+
$ speaker-test -c 2
  
 
Change -c to fit your speaker setup. Use -c 8 for 7.1, for instance:
 
Change -c to fit your speaker setup. Use -c 8 for 7.1, for instance:
  
{{bc|$ speaker-test -c 8}}
+
$ speaker-test -c 8
  
 
If it does not work, proceed to [[#Configuration]] and then [[#Troubleshooting]] to solve your issues.
 
If it does not work, proceed to [[#Configuration]] and then [[#Troubleshooting]] to solve your issues.
  
If it works, you just need to save your mixer settings.
+
The {{pkg|alsa-utils}} package includes {{ic|alsa-restore.service}} and {{ic|alsa-store.service}}, which are preconfigured to run at boot and shutdown respectively.
  
{{bc|# alsactl store}}
+
==Configuration==
 +
===No sound in virtualbox===
 +
If you experience problems with virtualbox, the following command might be helpful:
  
This will create the file {{ic|/var/lib/alsa/asound.state}}, saving the alsamixer settings.
+
{{hc|$ alsactl init|2=<nowiki>
  
Then, add the {{ic|alsa}} [[daemon]] to your {{ic|DAEMONS}} array in {{ic|/etc/rc.conf}} to automatically restore the mixer settings at boot. See [[rc.conf#Daemons]] for detailed instructions.
+
Found hardware: "ICH" "SigmaTel STAC9700,83,84" "AC97a:83847600" "0x8086" "0x0000"
 +
Hardware is initialized using a generic method
 +
</nowiki>
 +
}}
  
{{Note|The {{ic|alsa}} daemon merely restores your volume mixer levels on boot up by reading {{ic|/var/lib/alsa/asound.state}}. It is separate from the alsa audio library (and kernel level API).}}
+
You might need to activate the ALSA output in your audio software as well.
  
==Configuration==
 
 
===Set the default sound card===
 
===Set the default sound card===
 +
 +
If your sound card order changes on boot, you can specify their order in any file ending with {{ic|.conf}} in {{ic|/etc/modprobe.d}} ({{ic|/etc/modprobe.d/alsa-base.conf}} is suggested).
 +
For example, if you want your mia sound card to be #0:
 +
 +
{{hc|/etc/modprobe.d/alsa-base.conf|2=<nowiki>
 +
options snd slots=snd_mia,snd_hda_intel
 +
options snd_mia index=0
 +
options snd_hda_intel index=1
 +
</nowiki>}}
 +
 +
snd_mia and snd_hda_intel are the modules used by the respective cards.  This configuration assumes you have one mia sound card and one card using snd_hda_intel (e.g. onboard).
 +
 +
You can also provide an index of -2 to instruct ALSA to never use a card as the primary one. Distributions such as Linux Mint and Ubuntu use the following settings to avoid USB and other "abnormal" drivers from getting index 0:
 +
 +
{{hc|/etc/modprobe.d/alsa-base.conf|2=<nowiki>
 +
options bt87x index=-2
 +
options cx88_alsa index=-2
 +
options saa7134-alsa index=-2
 +
options snd-atiixp-modem index=-2
 +
options snd-intel8x0m index=-2
 +
options snd-via82xx-modem index=-2
 +
options snd-usb-audio index=-2
 +
options snd-usb-caiaq index=-2
 +
options snd-usb-ua101 index=-2
 +
options snd-usb-us122l index=-2
 +
options snd-usb-usx2y index=-2
 +
# Keep snd-pcsp from being loaded as first soundcard
 +
options snd-pcsp index=-2
 +
# Keep snd-usb-audio from beeing loaded as first soundcard
 +
options snd-usb-audio index=-2
 +
</nowiki>}}
 +
 +
These changes require a system reboot.
 +
 +
{{Out of date|{{ic|/etc/asound.conf}} does not exist on a default setup, and these instructions may not work.}}
  
 
First you will have to find out the card and device id that you want to set as the default by running {{ic|aplay -l}}:
 
First you will have to find out the card and device id that you want to set as the default by running {{ic|aplay -l}}:
Line 103: Line 144:
 
</nowiki>}}
 
</nowiki>}}
  
For example, the last entry in this list has the card id 2 and the device id 0. To set this card as the default, you can either use the system-wide file {{ic|/etc/asound.conf}} or the user-specific file {{ic|~/.asoundrc}}. You may have to create the file if it does not exist. Then insert the following options with the corresponding card and device id.
+
For example, the last entry in this list has the card ID 2 and the device ID 0. To set this card as the default, you can either use the system-wide file {{ic|/etc/asound.conf}} or the user-specific file {{ic|~/.asoundrc}}. You may have to create the file if it does not exist. Then insert the following options with the corresponding card and device id.
 
{{hc|~/.asoundrc|2=<nowiki>
 
{{hc|~/.asoundrc|2=<nowiki>
 
defaults.pcm.card 2
 
defaults.pcm.card 2
Line 129: Line 170:
  
 
If the output looks similar, your sound drivers have been successfully autodetected.
 
If the output looks similar, your sound drivers have been successfully autodetected.
{{Note|Since {{ic|udev>&#61;171}}, the OSS emulation modules ({{ic|snd_seq_oss, snd_pcm_oss, snd_mixer_oss}}) are not loaded by default: If they are needed, load them with {{ic|modprobe}} and/or add them in the {{ic|MODULES}} array in [[rc.conf|{{ic|/etc/rc.conf}}]]. As they bypass software mixing, don't load them unless you have legacy software that supports nothing but OSS.}}
+
{{Note|Since {{ic|udev>&#61;171}}, the OSS emulation modules ({{ic|snd_seq_oss, snd_pcm_oss, snd_mixer_oss}}) are not loaded by default: [[kernel modules#Loading|Load them manually]] if they are needed.}}
  
You might also want to check the directory '''/dev/snd''' for the right device files:
+
You might also want to check the directory {{ic|/dev/snd/}} for the right device files:
  
 
{{hc|$ ls -l /dev/snd|2=<nowiki>
 
{{hc|$ ls -l /dev/snd|2=<nowiki>
Line 152: Line 193:
 
If this is not the case, your sound modules have not been detected properly. To solve this, you can try loading the modules manually:
 
If this is not the case, your sound modules have not been detected properly. To solve this, you can try loading the modules manually:
  
* Locate the module for your soundcard: [http://www.alsa-project.org/main/index.php/Matrix:Main ALSA Soundcard Matrix] The module will be prefixed with 'snd-' (for example: 'snd-via82xx').
+
* Locate the module for your sound card: [http://www.alsa-project.org/main/index.php/Matrix:Main ALSA Soundcard Matrix] The module will be prefixed with 'snd-' (for example: {{ic|snd-via82xx}}).
* Load modules:
+
* [[Kernel modules#Loading|Load the module]].
  # modprobe snd-NAME-OF-MODULE
+
* Check for the device files in {{ic|/dev/snd}} (see above) and/or try if {{ic|alsamixer}} or {{ic|amixer}} have reasonable output.
* Check for the device files in '''/dev/snd''' (see above) and/or try if '''alsamixer''' or '''amixer''' have reasonable output.
+
* Configure {{ic|snd-NAME-OF-MODULE}} and {{ic|snd-pcm-oss}} to [[Kernel modules#Loading|load at boot]].
* Add '''snd-NAME-OF-MODULE''' and '''snd-pcm-oss''' to the list of MODULES in {{ic|/etc/rc.conf}} to ensure they are loaded next time (make sure '''snd-NAME-OF-MODULE''' is before '''snd-pcm-oss''').
+
 
+
===Restore ALSA Mixer settings at startup===
+
{{Warning|If you use {{ic|kmix}}, make sure to configure it to not restore sound levels at startup. This will conflict with the configuration detailed below.}}
+
* Run {{ic|alsactl -f /var/lib/alsa/asound.state store}} once to create {{ic|/var/lib/alsa/asound.state}}.
+
 
+
# alsactl -f /var/lib/alsa/asound.state store
+
 
+
* Edit {{ic|/etc/[[rc.conf]]}} and add {{ic|"alsa"}} to the list of daemons to start on boot-up. This will store the mixer settings on every shutdown and restore them when you boot.
+
 
+
* If the mixer settings are not loaded on boot-up, add the following line to {{ic|/etc/rc.local}}:
+
 
+
# alsactl -f /var/lib/alsa/asound.state restore
+
 
+
* These methods still may not work, or you may prefer to have audio settings for individual users.  In this case, run {{ic|alsactl store -f ~/.asoundrc}} as a normal user.  This will save and restore volume settings on a per user basis.  To automate this process, add the respective commands to {{ic|~/.bash_login}} and {{ic|~/.bash_logout}}, or the correct locations for the shell of your choice.
+
 
+
For zsh, use {{ic|~/.zlogin}} and {{ic|~/.zlogout}}.
+
  
 
===Getting SPDIF Output===
 
===Getting SPDIF Output===
Line 178: Line 202:
 
* In GNOME Volume Control, under the Options tab, change the IEC958 to PCM.  This option can be enabled in the preferences.
 
* In GNOME Volume Control, under the Options tab, change the IEC958 to PCM.  This option can be enabled in the preferences.
 
* If you do not have GNOME Volume Control installed,
 
* If you do not have GNOME Volume Control installed,
** Edit /var/lib/alsa/asound.state.  This file is where alsasound stores your mixer settings.
+
** Edit {{ic|/var/lib/alsa/asound.state}}.  This file is where alsasound stores your mixer settings.
** Find a line that says: 'IEC958 Playback Switch'.  Near it you will find a line saying value:false. Change it to value:true.
+
** Find a line that says: 'IEC958 Playback Switch'.  Near it you will find a line saying {{ic|value:false}}. Change it to {{ic|value:true}}.
 
** Now find this line: 'IEC958 Playback AC97-SPSA'. Change its value to 0.
 
** Now find this line: 'IEC958 Playback AC97-SPSA'. Change its value to 0.
 
** Restart ALSA.
 
** Restart ALSA.
Line 236: Line 260:
 
  # su mpd -c 'alsamixer -D equal'
 
  # su mpd -c 'alsamixer -D equal'
 
or for example, you can make a symlink to your {{ic|.alsaequal.bin}} in his home...
 
or for example, you can make a symlink to your {{ic|.alsaequal.bin}} in his home...
 +
 +
=====Managing AlsaEqual States=====
 +
Install [http://xyne.archlinux.ca/projects/alsaequal-mgr/ alsaequal-mgr] from [http://xyne.archlinux.ca/repos/ Xyne's repos] or the [https://aur.archlinux.org/packages.php?ID=62420 AUR].
 +
 +
Configure the equalizer as usual with
 +
$alsamixer -D equal
 +
 +
When you are satisfied with the state, you may give it a name ("foo" in this example) and save it:
 +
$alsaequal-mgr save foo
 +
 +
The state "foo" can then be restored at a later time with
 +
$alsaequal-mgr load foo
 +
 +
You can thus create different equalizer states for games, movies, music genres, VoIP apps, etc. and reload them as necessary.
 +
 +
See the [http://xyne.archlinux.ca/projects/alsaequal-mgr/ project page] and the help message for more options.
  
 
====Using mbeq====
 
====Using mbeq====
Line 298: Line 338:
 
When software mixing is enabled, ALSA is forced to resample everything to the same frequency (48000 by default when supported). dmix uses a poor resampling algorithm which produces noticeable sound quality loss.
 
When software mixing is enabled, ALSA is forced to resample everything to the same frequency (48000 by default when supported). dmix uses a poor resampling algorithm which produces noticeable sound quality loss.
  
Install alsa-plugins and libsamplerate:
+
Install {{pkg|alsa-plugins}} and {{pkg|libsamplerate}}.
{{bc|# pacman -S alsa-plugins libsamplerate}}
+
  
 
Change the default rate converter to libsamplerate:
 
Change the default rate converter to libsamplerate:
Line 381: Line 420:
  
 
===Hardware mixing===
 
===Hardware mixing===
{{poor writing}}
+
====Support====
*Use a soundcard that supports hardware mixing: old SoundBlaster Live! series (emu10k1 chip) and new Audigy series (emu10k2 chip) cards are known to work.
+
If you have an audio chipset that supports mixing in hardware, then no configuration is necessary. Almost every onboard audio chipset does not support hardware mixing, and requires mixing to be done in software (see above). Many sound cards do support hardware mixing, and the ones best supported on Linux are listed below:
  
*The SoundBlaster Live! 5.1 is fairly easy to find and is cheap to buy.
+
* Creative SoundBlaster Live! (5.1 model)
 +
* Creative SoundBlaster Audigy (some models)
 +
* Creative SoundBlaster Audidy 2 (ZS models)
 +
* Creative SoundBlaster Audigy 4 (Pro models)
  
{{Note|new cheap Audigy SE, Audigy 2 NX, SoundBlaster Live! 24bit and SoundBlaster Live! 7.1 '''do not''' support hardware mixing (they use other chips).}}
+
{{Note|The old SoundBlaster Live! series (emu10k1 chip) and new Audigy [1, 2 ZS, 4 Pro] (emu10k2 chip) cards are known to work.}}
  
*99% of motherboards with integrated sound '''do not''' support hardware mixing.
+
{{Note|The SoundBlaster Live! 5.1 is fairly easy to find and is cheap to buy.}}
 +
 
 +
{{Note|new cheap Audigy SE, Audigy 2 NX, SoundBlaster Live! 24bit and SoundBlaster Live! 7.1 '''do not''' support hardware mixing (they use other chips).}}
  
{{Note|An exception is the onboard VIA8237 chip which supports 4-stream hardware mixing. However it does only 3 for some motherboards (the 4th makes no sound), or is just broken. Even if it works, the quality is not good compared to other solutions.}}
+
{{Note|The onboard VIA8237 chip supports 4-stream hardware mixing, however, it does only 3 for some motherboards (the 4th makes no sound) or is just broken. Even if it works, the quality is not good compared to other solutions.}}
  
*For Arch64 and the 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02), and to get sound from Enemy Territory, it works this by setting these:
+
====Fixes====
 +
If you are using 64-bit Arch and the Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02), you can get sound working for Enemy Territory with the following:
 
  echo "et.x86 0 0 direct" > /proc/asound/card0/pcm0p/oss
 
  echo "et.x86 0 0 direct" > /proc/asound/card0/pcm0p/oss
 
  echo "et.x86 0 0 disable" > /proc/asound/card0/pcm0c/oss
 
  echo "et.x86 0 0 disable" > /proc/asound/card0/pcm0c/oss
Line 452: Line 497:
  
 
===Random Lack of Sound on Startup===
 
===Random Lack of Sound on Startup===
If you randomly have no sound on startup, it may be because your system has multiple sound cards, and their order may sometimes change on startup.  If this is the case, then change this section of {{ic|/etc/asound.conf}}:
+
If you randomly have no sound on startup, it may be because your system has multiple sound cards, and their order may sometimes change on startup.  If this is the case, try [[#Set the default sound card|setting the default sound card]].
 
+
{{bc|<nowiki>
+
ctl.dmixer {
+
    type hw
+
    card FOO
+
}
+
</nowiki>}}
+
Replace FOO with the desired audio device, as reported in the /proc/asound/cards file.  An example of the file is shown below.
+
{{bc|
+
0 [U0x46d0x9a1    ]: USB-Audio - USB Device 0x46d:0x9a1
+
                      USB Device 0x46d:0x9a1 at usb-0000:00:12.2-2, high speed
+
1 [SB            ]: HDA-Intel - HDA ATI SB
+
                      HDA ATI SB at 0xf9ff4000 irq 16
+
}}
+
Device 0 is the microphone built into a webcam, while device 1 is the integrated sound card.  If you have copied the {{ic|/etc/asound.conf}} from above as is, alsa will attempt to initialize the microphone as an audio output device, but will fail and you will have no sound.  Rather than setting FOO to the number, you set it to the name next to the number, like so:
+
{{bc|<nowiki>
+
ctl.dmixer {
+
    type hw
+
    card SB
+
}
+
</nowiki>}}
+
 
+
If you use dmix, you will want to have a configuration such as this one:
+
{{bc|<nowiki>
+
ctl.!default {
+
    type hw
+
    card Intel #adapt this to your card
+
    #device 0 #not required, defaults to 0 (see the output of aplay -L)
+
}
+
 
+
pcm.dmixer {
+
    type dmix
+
    ipc_key 1024 #required and must be unique
+
    slave.pcm {
+
        type hw
+
        card Intel #same as above
+
        #device 0 #same as above
+
    }
+
}
+
 
+
pcm.!default {
+
    type plug
+
    slave.pcm dmixer
+
}
+
</nowiki>}}
+
 
+
To make most programs use Alsa, make sure {{ic|/etc/libao.conf}} only contains the following.
+
default_driver=alsa10
+
  
 
If you use mpd and the configuration tips above do not work for you, try [http://mpd.wikia.com/wiki/Configuration#ALSA_MPD_software_volume_control reading this] instead.
 
If you use mpd and the configuration tips above do not work for you, try [http://mpd.wikia.com/wiki/Configuration#ALSA_MPD_software_volume_control reading this] instead.
Line 584: Line 581:
  
 
===Setting the default Microphone/Capture Device===
 
===Setting the default Microphone/Capture Device===
Some applications (Pidgin, Adobe Flash) do not provide an option to change the capture device. It becomes an issue if your microphone is on a separate device (i.e. USB webcam or microphone) than your internal sound card. To change only the default capture device, leaving the default playback device as is, you can modify your ~/.asoundrc file to include the following:
+
Some applications (Pidgin, Adobe Flash) do not provide an option to change the capture device. It becomes an issue if your microphone is on a separate device (e.g. USB webcam or microphone) than your internal sound card. To change only the default capture device, leaving the default playback device as is, you can modify your {{ic|~/.asoundrc}} file to include the following:
  
 
  pcm.usb
 
  pcm.usb
Line 607: Line 604:
 
  }
 
  }
  
Replace "U0x46d0x81d" with your capture device's card name in ALSA. You can use 'arecord -L' to list all the capture devices detected by ALSA.
+
Replace "U0x46d0x81d" with your capture device's card name in ALSA. You can use {{ic|arecord -L}} to list all the capture devices detected by ALSA.
  
 
===Internal Microphone not working===
 
===Internal Microphone not working===
Line 726: Line 723:
  
 
===Pops When Starting and Stopping Playback===
 
===Pops When Starting and Stopping Playback===
Some modules (i.e. snd-ac97-codec and snd-hda-intel) can power off your sound card when not in use. This can make an audible noise (like a crack/pop/scratch) when turning on/off your sound card. Sometimes even when move the slider volume, or open and close windows (KDE4). If you find this annoying try "modinfo snd-MY-MODULE", and look for a module option that adjusts or disables this feature.
+
Some modules (e.g. snd_ac97_codec and snd_hda_intel) can power off your sound card when not in use. This can make an audible noise (like a crack/pop/scratch) when turning on/off your sound card. Sometimes even when move the slider volume, or open and close windows (KDE4). If you find this annoying try {{ic|modinfo snd_MY_MODULE}}, and look for a module option that adjusts or disables this feature.
  
Example:to disable the power saving mode and solve cracking sound trough speakers issue, using snd-hda-intel add in /etc/modprobe.d/modprobe.conf
+
Example: to disable the power saving mode and solve cracking sound trough speakers issue, using snd_hda_intel add in {{ic|/etc/modprobe.d/modprobe.conf}}
[options snd-hda-intel power_save=0]
+
options snd_hda_intel power_save=0
 
or
 
or
[options snd-hda-intel power_save=0 power_save_controller=N]
+
options snd_hda_intel power_save=0 power_save_controller=N
  
You can also try it with "modprobe snd-hda-intel power_save=0" before.
+
You can also try it with {{ic|1=modprobe snd_hda_intel power_save=0}} before.
  
You may also have to unmute the 'Line' alsa channel for this to work. Any value will do (other than '0' or something too high).
+
You may also have to unmute the 'Line' ALSA channel for this to work. Any value will do (other than '0' or something too high).
  
''Example:'' on an onboard VIA VT1708S (using the snd-hda-intel module) these cracks occured even though 'power_save' was set to 0. Unmuting the 'Line' channel and setting a value of '1' solved the issue.
+
''Example:'' on an onboard VIA VT1708S (using the snd_hda_intel module) these cracks occured even though 'power_save' was set to 0. Unmuting the 'Line' channel and setting a value of '1' solved the issue.
  
Source: http://www.kernel.org/doc/Documentation/sound/alsa/powersave.txt
+
Source: https://www.kernel.org/doc/Documentation/sound/alsa/powersave.txt
  
===Alsamixer Does Not Run===
+
If you use a laptop, pm-utils will change {{ic|power_save}} back to 1 when you go onto battery power even if you disable power saving in {{ic|/etc/modprobe.d}}. Disable this for pm-utils by disabling the script that makes the change:
If running alsamixer does not work and you wind up with the following error
+
# chmod -x /usr/lib/pm-utils/power.d/intel-audio-powersave
alsamixer: function snd_ctl_open failed for default: No such device or directory
+
 
+
You should first check /etc/group to ensure that your current user is in the 'audio' group. Do not forget to log out and log in again for the group changes.
+
 
+
Then you might need to re-install your kernel. Run 'pacman -S linux' or whichever patchset you prefer to use.
+
  
 
===S/PDIF Output Does Not Work===
 
===S/PDIF Output Does Not Work===
Line 815: Line 807:
 
#! /bin/bash
 
#! /bin/bash
 
set -x
 
set -x
 +
export DISPLAY=:0
 +
hdmi_status="$(cat /sys/class/drm/card0-HDMI-A-1/status)"
 +
USERID="$(cat /var/run/ConsoleKit/database | grep -B 6 is_active=true | grep uid= | cut -f 2 -d '=')"
 +
USER="$(grep $USERID /etc/passwd | cut -f 1 -d ':')"
  
udevadm settle --quiet --timeout=16
+
if [[ $hdmi_status == "disconnected" ]]; then
 +
[[ $(pgrep X) > 0 ]] && su $USER -c "xrandr --output HDMI-1 --off"
 +
else
 +
[[ $(pgrep X) > 0 ]] && su $USER -c "xrandr --output LVDS-1 --mode 1920x1080 --auto --output HDMI-1 --auto --right-of LVDS-1"
 +
fi
  
read hdmi_status </sys/class/drm/card0-HDMI-A-1/status
+
ln -sf "/etc/alsa/asound.hdmi-$hdmi_status" /etc/asound.conf
alsa_dir=/etc/alsa
+
systemctl restart alsa-restore
asound_file=asound.hdmi-$hdmi_status
+
  
if [[ -n $hdmi_status && -f "$alsa_dir/$asound_file" ]]; then
+
exit 0
    ln -sf "$alsa_dir/$asound_file" /etc/asound.conf
+
    /etc/rc.d/alsa force-restart # or restart if you don't want existing clients to be unceremoniously shut down
+
fi
+
 
</nowiki>
 
</nowiki>
 
}}
 
}}
Line 916: Line 912:
 
* [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=patch;h=76adaa34db407f174dd06370cb60f6029c33b465 drm: support routines for HDMI/DP ELD]
 
* [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=patch;h=76adaa34db407f174dd06370cb60f6029c33b465 drm: support routines for HDMI/DP ELD]
 
* [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=patch;h=e0dac65ed45e72fe34cc7ccc76de0ba220bd38bb drm/i915: pass ELD to HDMI/DP audio driver]
 
* [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=patch;h=e0dac65ed45e72fe34cc7ccc76de0ba220bd38bb drm/i915: pass ELD to HDMI/DP audio driver]
 
===No Adjustable PCM Channel===
 
You may find that you lack an adjustable PCM channel. In this case, try to remove all sound-related stuff from {{ic|MODULES}} section in {{ic|/etc/[[rc.conf]]}}, except for {{ic|snd-NAME-OF-MODULE}}.
 
  
 
===HP TX2500===
 
===HP TX2500===
Line 949: Line 942:
 
source: http://alsa.opensrc.org/Usb-audio#Tuning_USB_devices_for_minimal_latencies
 
source: http://alsa.opensrc.org/Usb-audio#Tuning_USB_devices_for_minimal_latencies
  
===Error 'Unkown hardware' Appears After a Kernel Update===
+
===Error 'Unknown hardware' Appears After a Kernel Update===
 
The following messages may be displayed during the start-up ALSA after the kernel update:
 
The following messages may be displayed during the start-up ALSA after the kernel update:
 
  Unknown hardware "foo" "bar" ...
 
  Unknown hardware "foo" "bar" ...
Line 966: Line 959:
 
  # alsactl -f /var/lib/alsa/asound.state store
 
  # alsactl -f /var/lib/alsa/asound.state store
  
It may be necessary configure alsa again with alsamixer
+
It may be necessary configure ALSA again with alsamixer
  
 
===HDA Analyzer===
 
===HDA Analyzer===
Line 975: Line 968:
 
The workaround is: open "run.py", find all occurences of "python" (2 occurences - one on the first line, and the second on the last line) and replace them all by "python2".
 
The workaround is: open "run.py", find all occurences of "python" (2 occurences - one on the first line, and the second on the last line) and replace them all by "python2".
  
NOTE2: the script requires root acces, but running it via su/sudo is bogus. Run it via kdesu or gtksu.
+
NOTE2: the script requires root acces, but running it via su/sudo is bogus. Run it via {{ic|kdesu}} or {{ic|gksu}}.
  
 
===ALSA with SDL===
 
===ALSA with SDL===
Line 1,008: Line 1,001:
 
After the changes are loaded successfully, you will see a {{ic|Pre-Amp}} section in alsamixer. You can adjust the levels there.
 
After the changes are loaded successfully, you will see a {{ic|Pre-Amp}} section in alsamixer. You can adjust the levels there.
 
{{note|Setting a high value for {{ic|Pre-Amp}} can cause sound distortion, so adjust it according to the level that suits you.}}
 
{{note|Setting a high value for {{ic|Pre-Amp}} can cause sound distortion, so adjust it according to the level that suits you.}}
 +
 +
===Popping sound after resuming from suspension===
 +
You might hear a popping sound after resuming the computer from suspension. This can be fixed by editing {{ic|/etc/pm/sleep.d/90alsa}} and removing the line that says {{ic|aplay -d 1 /dev/zero}}
  
 
==Example configurations==
 
==Example configurations==

Revision as of 01:31, 14 November 2012

The Advanced Linux Sound Architecture (ALSA) is a Linux kernel component which replaced the original Open Sound System (OSSv3) for providing device drivers for sound cards. Besides the sound device drivers, ALSA also bundles a user space library for application developers who want to use driver features with a higher level API than direct interaction with the kernel drivers.

Note: For an alternative sound environment, see the Open Sound System page.

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary end

Contents

Installation

ALSA is included in the default Arch kernel as a set of modules, so installing it is not necessary.

udev will automatically probe your hardware at boot, loading the corresponding kernel module for your audio card. Therefore, your sound should already be working, but upstream sources mute all channels by default.

Users with a local login (at a virtual terminal or a display manager) have permission to play audio and change mixer levels. To allow this for a remote login, the user has to be added to the audio group. Membership in the audio group also allows direct access to devices, which can lead to applications grabbing exclusive output (breaking software mixing) and breaks fast-user-switching, and multiseat.

User-space utilities

From official repositories:

  • Install the alsa-utils package which contains the alsamixer user-space tool, which allows for configuration of the sound device from the console or terminal.
  • Install the alsa-oss package if you want OSS applications to work with dmix (software mixing).
Note: Since udev >= 171, the OSS emulation modules (snd_seq_oss, snd_pcm_oss, snd_mixer_oss) are not automatically loaded by default.

Unmuting the channels

The current version of ALSA installs with all channels muted by default. You will need to unmute the channels manually.

It is easiest to use alsamixer ncurses UI to accomplish this:

$ alsamixer

Alternatively, use amixer from the command-line:

$ amixer sset Master unmute

The label MM below a channel indicates that the channel is muted, and 00 indicates that it is open.

Scroll to the Master and PCM channels with the Template:Keypress and Template:Keypress keys and unmute them by pressing the Template:Keypress key. Use the Template:Keypress key to increase the volume and obtain a value of 0 dB gain. The gain can be found in the upper left next to the Item: field. Higher values of gain will produce distorted sound.

To get full 5.1 or 7.1 surround sound you likely need to unmute other channels such as Front, Surround, Center, LFE (subwoofer) and Side (these are the names of the channels with Intel HD Audio, they may vary with different hardware). Please take note that this will not automatically upmix stereo sources (like most music). In order to accomplish that, see #Upmixing/Downmixing.

Leave alsamixer by pressing Template:Keypress.

Note:
  • Some cards need to have digital output muted/turned off in order to hear analog sound. For the Soundblaster Audigy LS mute the IEC958 channel.
  • Some machines, (like the Thinkpad T61), have a Speaker channel which must be unmuted and adjusted as well.
  • Some machines, (like Dell E6400) may also require the Front and Headphone channels to be unmuted and adjusted.

Next, test to see if sound works:

$ speaker-test -c 2

Change -c to fit your speaker setup. Use -c 8 for 7.1, for instance:

$ speaker-test -c 8

If it does not work, proceed to #Configuration and then #Troubleshooting to solve your issues.

The alsa-utils package includes alsa-restore.service and alsa-store.service, which are preconfigured to run at boot and shutdown respectively.

Configuration

No sound in virtualbox

If you experience problems with virtualbox, the following command might be helpful:

$ alsactl init

Found hardware: "ICH" "SigmaTel STAC9700,83,84" "AC97a:83847600" "0x8086" "0x0000"
Hardware is initialized using a generic method

You might need to activate the ALSA output in your audio software as well.

Set the default sound card

If your sound card order changes on boot, you can specify their order in any file ending with .conf in /etc/modprobe.d (/etc/modprobe.d/alsa-base.conf is suggested). For example, if you want your mia sound card to be #0:

/etc/modprobe.d/alsa-base.conf
options snd slots=snd_mia,snd_hda_intel
options snd_mia index=0
options snd_hda_intel index=1

snd_mia and snd_hda_intel are the modules used by the respective cards. This configuration assumes you have one mia sound card and one card using snd_hda_intel (e.g. onboard).

You can also provide an index of -2 to instruct ALSA to never use a card as the primary one. Distributions such as Linux Mint and Ubuntu use the following settings to avoid USB and other "abnormal" drivers from getting index 0:

/etc/modprobe.d/alsa-base.conf
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2

These changes require a system reboot.

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: /etc/asound.conf does not exist on a default setup, and these instructions may not work. (Discuss in Talk:Advanced Linux Sound Architecture#)

First you will have to find out the card and device id that you want to set as the default by running aplay -l:

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: Conexant Digital [Conexant Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: JamLab [JamLab], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Audio [Altec Lansing XT1 - USB Audio], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

For example, the last entry in this list has the card ID 2 and the device ID 0. To set this card as the default, you can either use the system-wide file /etc/asound.conf or the user-specific file ~/.asoundrc. You may have to create the file if it does not exist. Then insert the following options with the corresponding card and device id.

~/.asoundrc
defaults.pcm.card 2
defaults.pcm.device 0
defaults.ctl.card 2

The 'pcm' options affect which card and device will be used for audio playback while the 'ctl' option affects which card is used by control utilities like alsamixer .

The changes should take effect as soon as you (re-)start an application (mplayer etc.).

Making sure the sound modules are loaded

You can assume that udev will autodetect your sound properly. You can check this with the command

$ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi     22378   4
snd_hda_codec_realtek  294191  1
snd_hda_intel          21738   1
snd_hda_codec          73739   3  snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              6134    1  snd_hda_codec
snd_pcm                71032   3  snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer              18992   1  snd_pcm
snd                    55132   9  snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc         7017    2  snd_hda_intel,snd_pcm

If the output looks similar, your sound drivers have been successfully autodetected.

Note: Since udev>=171, the OSS emulation modules (snd_seq_oss, snd_pcm_oss, snd_mixer_oss) are not loaded by default: Load them manually if they are needed.

You might also want to check the directory /dev/snd/ for the right device files:

$ ls -l /dev/snd
total 0
crw-rw----  1 root audio 116,  0 Apr  8 14:17 controlC0
crw-rw----  1 root audio 116, 32 Apr  8 14:17 controlC1
crw-rw----  1 root audio 116, 24 Apr  8 14:17 pcmC0D0c
crw-rw----  1 root audio 116, 16 Apr  8 14:17 pcmC0D0p
crw-rw----  1 root audio 116, 25 Apr  8 14:17 pcmC0D1c
crw-rw----  1 root audio 116, 56 Apr  8 14:17 pcmC1D0c
crw-rw----  1 root audio 116, 48 Apr  8 14:17 pcmC1D0p
crw-rw----  1 root audio 116,  1 Apr  8 14:17 seq
crw-rw----  1 root audio 116, 33 Apr  8 14:17 timer
Note: If requesting help on IRC or the forums, please post the output of the above commands.

If you have at least the devices controlC0 and pcmC0D0p or similar, then your sound modules have been detected and loaded properly.

If this is not the case, your sound modules have not been detected properly. To solve this, you can try loading the modules manually:

  • Locate the module for your sound card: ALSA Soundcard Matrix The module will be prefixed with 'snd-' (for example: snd-via82xx).
  • Load the module.
  • Check for the device files in /dev/snd (see above) and/or try if alsamixer or amixer have reasonable output.
  • Configure snd-NAME-OF-MODULE and snd-pcm-oss to load at boot.

Getting SPDIF Output

(from gralves from the Gentoo forums)

  • In GNOME Volume Control, under the Options tab, change the IEC958 to PCM. This option can be enabled in the preferences.
  • If you do not have GNOME Volume Control installed,
    • Edit /var/lib/alsa/asound.state. This file is where alsasound stores your mixer settings.
    • Find a line that says: 'IEC958 Playback Switch'. Near it you will find a line saying value:false. Change it to value:true.
    • Now find this line: 'IEC958 Playback AC97-SPSA'. Change its value to 0.
    • Restart ALSA.

Alternative way to enable SPDIF output automatically on login (tested on SoundBlaster Audigy):

  • add following lines to /etc/rc.local:
 # Use COAX-digital output
 amixer set 'IEC958 Optical' 100 unmute
 amixer set 'Audigy Analog/Digital Output Jack' on

You can see the name of your card's digital output with:

 $ amixer scontrols

System-Wide Equalizer

Using AlsaEqual (provides UI)

Install alsaequalAUR from the AUR.

Note: If you have a x86_64-system and are using a 32bit-flashplugin the sound in flash will not work. Either you have to disable alsaequal or build alsaequal for 32bit.

After installing the package, insert the following into your ALSA configuration file (~/.asoundrc or /etc/asound.conf):

ctl.equal {
 type equal;
}

pcm.plugequal {
  type equal;
  # Modify the line below if you do not
  # want to use sound card 0.
  #slave.pcm "plughw:0,0";
  #by default we want to play from more sources at time:
  slave.pcm "plug:dmix";
}
#pcm.equal {
  # If you don't want the equalizer to be your
  # default soundcard comment the following
  # line and uncomment the above line. (You can
  # choose it as the output device by addressing
  # it with specific apps,eg mpg123 -a equal 06.Back_In_Black.mp3)
pcm.!default {
  type plug;
  slave.pcm plugequal;
}

Then reload your ALSA settings (as root).

# rc.d restart alsa

not sure if this is really needed - more important is to shut down all applications using ALSA...

And you are ready to change your equalizer using command

$ alsamixer -D equal

Note that configuration file is different for each user (until not specified else) it is saved in ~/.alsaequal.bin. so if you want to use AlsaEqual with mpd or another software running under different user, you can configure it using

# su mpd -c 'alsamixer -D equal'

or for example, you can make a symlink to your .alsaequal.bin in his home...

Managing AlsaEqual States

Install alsaequal-mgr from Xyne's repos or the AUR.

Configure the equalizer as usual with

$alsamixer -D equal

When you are satisfied with the state, you may give it a name ("foo" in this example) and save it:

$alsaequal-mgr save foo

The state "foo" can then be restored at a later time with

$alsaequal-mgr load foo

You can thus create different equalizer states for games, movies, music genres, VoIP apps, etc. and reload them as necessary.

See the project page and the help message for more options.

Using mbeq

Note: This method requires the use of a ladspa plugin which might use quite a bit of CPU when sound plays. In addition, this was made with stereophonic sound (e.g. headphones) in mind.

Install the alsa-plugins, ladspa and swh-plugins packages if you do not already have them.

  • If you have not already created either an ~/.asoundrc or a /etc/asound.conf file, then create either one and insert the following:
/etc/asound.conf
pcm.eq {
  type ladspa

  # The output from the EQ can either go direct to a hardware device
  # (if you have a hardware mixer, e.g. SBLive/Audigy) or it can go
  # to the software mixer shown here.
  #slave.pcm "plughw:0,0"
  slave.pcm "plug:dmix"

  # Sometimes you may need to specify the path to the plugins,
  # especially if you have just installed them.  Once you have logged
  # out/restarted this should not be necessary, but if you get errors
  # about being unable to find plugins, try uncommenting this.
  #path "/usr/lib/ladspa"

  plugins [
    {
      label mbeq
      id 1197
      input {
        #this setting is here by example, edit to your own taste
        #bands: 50hz, 100hz, 156hz, 220hz, 311hz, 440hz, 622hz, 880hz, 1250hz, 1750hz, 25000hz,
        #50000hz, 10000hz, 20000hz
        controls [ -5 -5 -5 -5 -5 -10 -20 -15 -10 -10 -10 -10 -10 -3 -2 ]
      }
    }
  ]
 }

 # Redirect the default device to go via the EQ - you may want to do
 # this last, once you're sure everything is working.  Otherwise all
 # your audio programs will break/crash if something has gone wrong.

 pcm.!default {
  type plug
  slave.pcm "eq"
 }

 # Redirect the OSS emulation through the EQ too (when programs are running through "aoss")

 pcm.dsp0 {
  type plug
  slave.pcm "eq"
 }
  • Reload your alsa settings (as root).
# rc.d restart alsa
  • You should be good to go (if not, ask in the forum).

High quality resampling

When software mixing is enabled, ALSA is forced to resample everything to the same frequency (48000 by default when supported). dmix uses a poor resampling algorithm which produces noticeable sound quality loss.

Install alsa-plugins and libsamplerate.

Change the default rate converter to libsamplerate:

/etc/asound.conf
defaults.pcm.rate_converter "samplerate_best"

or

~/.asoundrc
defaults.pcm.rate_converter "samplerate_best"

samplerate_best offers the best sound quality, but you need a decent CPU to be able to use it as it requires a lot of CPU cycles for real-time resampling. There are other algorithms available (samplerate, etc.) but they may not provide much of an improvement over the default resampler.

Warning: On some systems, enabling samplerate_best may cause an issue where you get no sound from flashplayer.

Upmixing/Downmixing

Upmixing

In order for stereo sources like music to be able to saturate a 5.1 or 7.1 sound system, you need to use upmixing. In darker days this used to be tricky and error prone but nowadays plugins exist to easily take care of this task. Thus, install alsa-plugins.

Then add the following to your ALSA configuration file of choice (either /etc/asound.conf or ~/.asoundrc):

pcm.upmix71 {
    type upmix
    slave.pcm "surround71"
    delay 15
    channels 8
}

You can easily change this example for 7.1 upmixing to 5.1 or 4.0.

This adds a new pcm that you can use for upmixing. If you want all sound sources to go through this pcm, add it as a default below the previous definition like so:

pcm.!default "plug:upmix71"

The plugin automatically allows multiple sources to play through it without problems so setting is as a default is actually a safe choice. If this is not working, you have to setup your own dmixer for the upmixing PCM like this:

pcm.dmix6 {
    type asym
    playback.pcm {
        type dmix
        ipc_key 567829
        slave {
            pcm "hw:0,0"
            channels 6
        }
    }
}

and use "dmix6" instead of "surround71". If you experience skipping or distorted sound, consider increasing the buffer_size (to 32768, for example) or use a high quality resampler.

Downmixing

If you want to downmix sources to stereo because you, for instance, want to watch a movie with 5.1 sound on a stereo system, you need to use the vdownmix plugin that alsa provides in the same package.

Again, in your configuration file, add this:

pcm.!surround51 {
    type vdownmix
    slave.pcm "default"
}
pcm.!surround40 {
    type vdownmix
    slave.pcm "default"
}

Mixing

Software mixing (dmix)

Note: For ALSA 1.0.9rc2 and higher on analog sound outputs you do not need to setup dmix. Dmix is enabled as default for soundcards which do not support hardware mixing.

If that does not work however, it is a matter of simply creating a .asoundrc file in your home folder with the following contents.

pcm.dsp {
    type plug
    slave.pcm "dmix"
}

This should enable software mixing and allows more than one application to make use of the soundcard.

For a digital sound output such as S/PDIF, the ALSA package still does not enable dmix by default. Thus, the dmix configuration above can be used to enable dmix for S/PDIF devices.

See #Troubleshooting for common problems and solutions.

Hardware mixing

Support

If you have an audio chipset that supports mixing in hardware, then no configuration is necessary. Almost every onboard audio chipset does not support hardware mixing, and requires mixing to be done in software (see above). Many sound cards do support hardware mixing, and the ones best supported on Linux are listed below:

  • Creative SoundBlaster Live! (5.1 model)
  • Creative SoundBlaster Audigy (some models)
  • Creative SoundBlaster Audidy 2 (ZS models)
  • Creative SoundBlaster Audigy 4 (Pro models)
Note: The old SoundBlaster Live! series (emu10k1 chip) and new Audigy [1, 2 ZS, 4 Pro] (emu10k2 chip) cards are known to work.
Note: The SoundBlaster Live! 5.1 is fairly easy to find and is cheap to buy.
Note: new cheap Audigy SE, Audigy 2 NX, SoundBlaster Live! 24bit and SoundBlaster Live! 7.1 do not support hardware mixing (they use other chips).
Note: The onboard VIA8237 chip supports 4-stream hardware mixing, however, it does only 3 for some motherboards (the 4th makes no sound) or is just broken. Even if it works, the quality is not good compared to other solutions.

Fixes

If you are using 64-bit Arch and the Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02), you can get sound working for Enemy Territory with the following:

echo "et.x86 0 0 direct" > /proc/asound/card0/pcm0p/oss
echo "et.x86 0 0 disable" > /proc/asound/card0/pcm0c/oss

Troubleshooting

Sound Skipping While Using Dynamic Frequency Scaling

Some combinations of ALSA drivers and chipsets may cause audio from all sources to skip when used in combination with a dynamic frequency scaling governor such as ondemand or conservative. Currently, the solution is to switch back to the performance governor.

Refer to the CPU Frequency Scaling for more information.

Problems with Availability to Only One User at a Time

You might find that only one user can use the dmixer at a time. This is probably ok for most, but for those who run mpd as a separate user this poses a problem. When mpd is playing a normal user cannot play sounds though the dmixer. While it's quite possible to just run mpd under a user's login account, another solution has been found. Adding the line ipc_key_add_uid 0 to the pcm.dmixer block disables this locking. The following is a snippet of the asound.conf, the rest is the same as above.

...
pcm.dmixer {
 type dmix
 ipc_key 1024
 ipc_key_add_uid 0
 ipc_perm 0660
slave {
...


Simultaneous Playback Issues

If you are having simultaneous playback issues, and if PulseAudio is installed (i.e. by GNOME), its default configuration is set to "hijack" the soundcard. Some users of ALSA may not want to use PulseAudio and are quite content with their current ALSA settings. One fix is to edit /etc/asound.conf and comment out the following lines:

# Use PulseAudio by default
#pcm.!default {
#  type pulse
#  fallback "sysdefault"
#  hint {
#    show on
#    description "Default ALSA Output (currently PulseAudio Sound Server)"
#  }
#}

Commenting the following out also may help:

#ctl.!default {
#  type pulse
#  fallback "sysdefault"
#}

This may be a much simpler solution than completely uninstalling PulseAudio.

Effectively, here is an example of a working /etc/asound.conf:

pcm.dmixer {
        type dmix
        ipc_key 1024
        ipc_key_add_uid 0
        ipc_perm 0660
}
pcm.dsp {
        type plug
        slave.pcm "dmix"
}
Note: This /etc/asound.conf file was intended for and used successfully with a global MPD configuration. See this section on multiple users

Random Lack of Sound on Startup

If you randomly have no sound on startup, it may be because your system has multiple sound cards, and their order may sometimes change on startup. If this is the case, try setting the default sound card.

If you use mpd and the configuration tips above do not work for you, try reading this instead.

Specific Program Problems

For other programs who insist on their own audio setup, eg, XMMS or Mplayer, you would need to set their specific options.

For mplayer, open up ~/.mplayer/config (or /etc/mplayer/mplayer.conf for global setting) and add the following line:

ao=alsa

For XMMS/Beep Media Player, go into their options and make sure the sound driver is set to Alsa, not oss.

To do this in XMMS:

  • Open XMMS
    • Options -> preferences.
    • Choose the Alsa output plugin.

For applications which do not provide a ALSA output, you can use aoss from the alsa-oss package. To use aoss, when you run the program, prefix it with aoss, eg:

aoss realplay

pcm.!default{ ... } doesnt work for me anymore. but this does:

 pcm.default pcm.dmixer

Model Settings

Although Alsa detects your soundcard through the BIOS at times Alsa may not be able to recognize your model type. The soundcard chip can be found in alsamixer (e.g. ALC662) and the model can be set in /etc/modprobe.d/modprobe.conf or /etc/modprobe.d/sound.conf. For example:

options snd-hda-intel model=MODEL

There are other model settings too. For most cases Alsa defaults will do. If you want to look at more specific settings for your soundcard take a look at the Alsa Soundcard List find your model, then Details, then look at the "Setting up modprobe..." section. Enter these values in /etc/modprobe.d/modprobe.conf. For example, for an Intel AC97 audio:

# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-intel8x0
# module options should go here

# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0

# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss

Conflicting PC Speaker

If you're sure nothing is muted, that your drivers are installed correctly, and that your volume is right, but you still do not hear anything, then try adding the following line to /etc/modprobe.d/modprobe.conf:

options snd-NAME-OF-MODULE ac97_quirk=0

The above fix has been observed to work with via82xx

options snd-NAME-OF-MODULE ac97_quirk=1

The above fix has been reported to work with snd_intel8x0

No Microphone Input

In alsamixer, make sure that all the volume levels are up under recording, and that CAPTURE is toggled active on the microphone (e.g. Mic, Internal Mic) and/or on Capture (in alsamixer, select these items and press space). Try making positive Mic Boost and raising Capture and Digital levels higher; this make make static or distortion, but then you can adjust them back down once you're hearing something when you record

As the pulseaudio wrapper is shown as "default" in alsamixer, your may have to press F6 to select your actual soundcard first. You may also need to enable and increase the volume of Line-in in the Playback section.

To test the microphone, run these commands (see arecord's man page for further information):

 arecord -d 5 test-mic.wav
 aplay test-mic.wav

If all fails, you may want to eliminate hardware failure by testing the microphone with a different device.

For at least some computers, muting a microphone (MM) simply means its input doesn't go immediately to the speakers. It still receives input.

Many Dell laptops need "-dmic" to be appended to the model name in /etc/modprobe.d/modprobe.conf:

 options snd-hda-intel model=dell-m6-dmic

Some programs use try to use OSS as the main input software. Add the following lines to /etc/modprobe.d/modprobe.conf to prevent OSS modules from being loaded:

Note: The OSS modules are no longer autoloaded anyway.
blacklist snd_pcm_oss
blacklist snd_mixer_oss
blacklist snd_seq_oss

See also:

Setting the default Microphone/Capture Device

Some applications (Pidgin, Adobe Flash) do not provide an option to change the capture device. It becomes an issue if your microphone is on a separate device (e.g. USB webcam or microphone) than your internal sound card. To change only the default capture device, leaving the default playback device as is, you can modify your ~/.asoundrc file to include the following:

pcm.usb
{
    type hw
    card U0x46d0x81d
}

pcm.!default
{
    type asym
    playback.pcm
    {
        type plug
        slave.pcm "dmix"
    }
    capture.pcm
    {
        type plug
        slave.pcm "usb"
    }
}

Replace "U0x46d0x81d" with your capture device's card name in ALSA. You can use arecord -L to list all the capture devices detected by ALSA.

Internal Microphone not working

First make sure all the volume levels are up under recording in alsamixer. In my case adding the following option to /etc/sound.conf and reloading the snd-* module produced a new volume setting called Capture which was capturing for the internal mic. For eg, for snd-hda-intel add

 options snd-hda-intel enable_msi=1

Then reload the module (as below), up the recording volume of Capture and then test.

# rmmod snd-hda-intel && modprobe snd-hda-intel

No Sound with Onboard Intel Sound Card

There may be an issue with two conflicting modules loaded, namely snd_intel8x0 and snd_intel8x0m. In this case, blacklist snd_intel8x0m:

/etc/modprobe.d/modprobe.conf
blacklist snd_intel8x0m

Muting the "External Amplifier" in alsamixer or amixer may also help. See the ALSA wiki.

No Headphone Sound with Onboard Intel Sound Card

With Intel Corporation 82801 I (ICH9 Family) HD Audio Controller on laptop, you may need to add this line to modprobe or sound.conf:

options snd-hda-intel model=$model

Where $model is any one of the following (in order of possibility to work, but not merit):

  • dell-vostro
  • olpc-xo-1_5
  • laptop
  • dell-m6
  • laptop-hpsense

Note: It may be necessary to put this "options" line below (after) any "alias" lines about your card.

You can see all the available models in the kernel documentation. For example here, but check that it is the correct version of that document for your kernel version.

A list of available models is also available here. To know your chip name type the following command (with * being corrected to match your files). Note that some chips could have been renamed and don't directly match the available ones in the file.

cat /proc/asound/card*/codec* | grep Codec

Note that there is a high chance none of the input devices (all internal and external mics) will work if you choose to do this, so it is either your headphones or your mic. Please report to ALSA if you are affected by this bug.

And also, if you have problems getting beeps to work (pcspkr):

options snd-hda-intel model=$model enable=1 index=0

No sound when S/PDIF video card is installed

Discover available modules and their order:

$ cat /proc/asound/modules
0 snd_hda_intel
1 snd_ca0106

Disable the undesired video card audio codec in /etc/modprobe.d/modprobe.conf:

# /etc/modprobe.d/modprobe.conf
#
install snd_hda_intel /bin/false

If both devices use the same module, it might be possible to disable one of them in the BIOS.

Poor sound quality or clipping

If you experience poor sound quality, try setting the PCM volume (in alsamixer) to a level such that gain is 0.

If snd-usb-audio driver has been loaded, you could try to enable softvol in /etc/asound.conf file. Example configuration for the first audio device:

 pcm.!default {
   type plug
   slave.pcm "softvol"
 }
 pcm.dmixer {
      type dmix
      ipc_key 1024
      slave {
          pcm "hw:0"
          period_time 0
          period_size 4096
          buffer_size 131072
          rate 50000
      }
      bindings {
          0 0
          1 1
      }
 }
 pcm.dsnooper {
      type dsnoop
      ipc_key 1024
      slave {
          pcm "hw:0"
          channels 2
          period_time 0
          period_size 4096
          buffer_size 131072
          rate 50000
      }
      bindings {
          0 0
          1 1
      }
 }
 pcm.softvol {
      type softvol
      slave { pcm "dmixer" }
      control {
          name "Master"
          card 0
      }
 }
 ctl.!default {
   type hw
   card 0
 }
 ctl.softvol {
   type hw
   card 0
 }
 ctl.dmixer {
   type hw
   card 0
 }

Pops When Starting and Stopping Playback

Some modules (e.g. snd_ac97_codec and snd_hda_intel) can power off your sound card when not in use. This can make an audible noise (like a crack/pop/scratch) when turning on/off your sound card. Sometimes even when move the slider volume, or open and close windows (KDE4). If you find this annoying try modinfo snd_MY_MODULE, and look for a module option that adjusts or disables this feature.

Example: to disable the power saving mode and solve cracking sound trough speakers issue, using snd_hda_intel add in /etc/modprobe.d/modprobe.conf

options snd_hda_intel power_save=0

or

options snd_hda_intel power_save=0 power_save_controller=N

You can also try it with modprobe snd_hda_intel power_save=0 before.

You may also have to unmute the 'Line' ALSA channel for this to work. Any value will do (other than '0' or something too high).

Example: on an onboard VIA VT1708S (using the snd_hda_intel module) these cracks occured even though 'power_save' was set to 0. Unmuting the 'Line' channel and setting a value of '1' solved the issue.

Source: https://www.kernel.org/doc/Documentation/sound/alsa/powersave.txt

If you use a laptop, pm-utils will change power_save back to 1 when you go onto battery power even if you disable power saving in /etc/modprobe.d. Disable this for pm-utils by disabling the script that makes the change:

# chmod -x /usr/lib/pm-utils/power.d/intel-audio-powersave

S/PDIF Output Does Not Work

If the optical/coaxial digital output of your motherboard/sound card is not working or stopped working, and have already enabled and unmuted it in alsamixer, try running

# iecset audio on

as root.

You can also put this command in rc.local as it sometimes it may stop working after a reboot.

HDMI Output Does Not Work

If the HDMI output of your motherboard/sound card is not working or stopped working, and have already enabled and unmuted it in alsamixer, try the following.

Query for Playback Devices:

 $ aplay -l
 **** List of PLAYBACK Hardware Devices ****
 card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
 card 0: NVidia [HDA NVidia], device 1: ALC1200 Digital [ALC1200 Digital]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
 card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
   Subdevices: 0/1
   Subdevice #0: subdevice #0

Now that we have the info for the HDMI device, try a test, In the example below, 0 is the card number and 3 is the device number.

 $ aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav

If aplay does not output any errors, but still no sound is heared, "reboot" the receiver, monitor or tv set. Since the HDMI interface executes a handshake on connection, it might have noticed before that there was no audio stream embedded, and disabled audio decoding.

Note: If you're using an ATI card and linux 3.0, check your kernel/grub settings, you most likely need to use the 'radeon.audio=1' boot parameter, or alternatively set up the option in your modprobe configuration files.

If the test is successful, create or edit your ~/.asoundrc file to set HDMI as the default audio device.

 pcm.!default {
      type hw
      card 0
      device 3
 }

You can restart alsa with the example below or you may reboot, and audio should now work.

Note: Any programs running that use alsa will be closed.
# rc.d force-restart alsa

Using udev to automatically turn HDMI audio on or off

Note: This will only work if the driver supports udev; NVIDIA's proprietary one, for instance, does not.

The previous steps in this section are good for testing, or if you don't need to hotplug your HDMI cable often. We now consider the situation where you have a laptop and want HDMI audio only when you have the HDMI cable plugged in.

The code in this section comes from The Arch Linux Forums.

We create a udev rule (for processing the cable connect/disconnect events), two different ALSA configuration files, and a script that switches between these configurations.

First create /etc/alsa/ if it doesn't exist yet; it will house the configuration files and the switcher script:

[[ -d /etc/alsa/ ]] || sudo mkdir -v /etc/alsa

Place inside this directory the following files (which you may wish to tweak as you see fit):

/etc/alsa/hdmi-switch
#! /bin/bash
set -x
export DISPLAY=:0
hdmi_status="$(cat /sys/class/drm/card0-HDMI-A-1/status)"
USERID="$(cat /var/run/ConsoleKit/database | grep -B 6 is_active=true | grep uid= | cut -f 2 -d '=')"
USER="$(grep $USERID /etc/passwd | cut -f 1 -d ':')"

if [[ $hdmi_status == "disconnected" ]]; then
	[[ $(pgrep X) > 0 ]] && su $USER -c "xrandr --output HDMI-1 --off"
else
	[[ $(pgrep X) > 0 ]] && su $USER -c "xrandr --output LVDS-1 --mode 1920x1080 --auto --output HDMI-1 --auto --right-of LVDS-1"
fi

ln -sf "/etc/alsa/asound.hdmi-$hdmi_status" /etc/asound.conf
systemctl restart alsa-restore

exit 0
/etc/alsa/asound.hdmi-connected
pcm.!default {
    type plug
    slave.pcm "dmixer"
}

pcm.dsp0 {
    type plug
    slave.pcm "dmixer"
}

pcm.dmixer {
    type dmix
    ipc_key 1024             
    ipc_key_add_uid 0
    ipc_perm 0666                
    slave {
        pcm "hw:0,3"    # HDMI CARD AND DEVICE
        period_time 0
        period_size 1024
        buffer_size 8192
        rate 48000 #or 44100
    }   
}

ctl.dmixer {
    type hw
    card 0
}
/etc/alsa/asound.hdmi-disconnected
pcm.!default {
   type plug
   slave.pcm "dmixer"
}
  
pcm.dsp0 {
   type plug
   slave.pcm "dmixer"
}
  
pcm.dmixer {
   type dmix
   ipc_key 1024                
   ipc_key_add_uid 0
   ipc_perm 0666           
   slave {
       pcm "hw:0,0"      # LOCAL CARD AND DEVICE
       period_time 0
       period_size 1024
       buffer_size 8192
       rate 48000 #or 44100
   }
}
  
ctl.dmixer {
   type hw
   card 0
}

The two asound.conf versions include dmix settings and allow merging of user permissions so that, for example, the mpd user and your regular user can access it at the same time.

You may now test that the switcher script works by running,

# chmod +x /etc/alsa/hdmi-switch
# /etc/alsa/hdmi-switch

You should find that you can successfully obtain HDMI audio output when you run the script while the cable is plugged in. You should be able to restore your default audio output by unplugging the cable and manually running the script again.

Once you have that working, we automate the process by adding the udev rule:

/etc/udev/rules.d/hdmi.rules
SUBSYSTEM=="drm", ACTION=="change", RUN+="/bin/bash /etc/alsa/hdmi-switch"

To make udev incorporate the new rule immediately, reload all rules:

# udevadm control --reload-rules

HDMI Multi-channel PCM output does not work (Intel)

As of Linux 3.1 multi-channel PCM output through HDMI with a Intel card (Intel Eaglelake, IbexPeak/Ironlake,SandyBridge/CougarPoint and IvyBridge/PantherPoint) is not yet supported. Support for it has been recently added and expected to be available in Linux 3.2. To make it work in Linux 3.1 you need to apply the following patches:

HP TX2500

Add these 2 lines into /etc/modprobe.d/modprobe.conf:

options snd-cmipci mpu_port=0x330 fm_port=0x388
options snd-hda-intel index=0 model=toshiba position_fix=1
options snd-hda-intel model=hp (works for tx2000cto)

Skipping Sound When Playing MP3

If you have sound skipping when playing MP3 files and you have more then 2 speakers attached to your computer (i.e. > 2 speaker system), run alsamixer and disable the channels for the speakers that you DO NOT have (i.e. do not enable the sound for the center speaker if you do not have a center speaker.

Using a USB Headset and External USB Sound Cards

If you are using a USB headset with ALSA you can try using asoundconfAUR (currently only available from the AUR) to set the headset as the primary sound output. note: before running please make sure you have usb audio module enabled

# modprobe snd-usb-audio

you can add this to /etc/rc.conf if you wish

# asoundconf is-active
# asoundconf list
# asoundconf set-default-card <chosen soundcard>

Crackling sound with USB devices

If you experience crackling sound on USB devices, you can try tuning the snd-usb-audio for minimal latency.

Add this to your /etc/modprobe.d/modprobe.conf:

options snd-usb-audio nrpacks=1

source: http://alsa.opensrc.org/Usb-audio#Tuning_USB_devices_for_minimal_latencies

Error 'Unknown hardware' Appears After a Kernel Update

The following messages may be displayed during the start-up ALSA after the kernel update:

Unknown hardware "foo" "bar" ...
Hardware is initialized using a guess method
/usr/sbin/alsactl: set_control:nnnn:failed to obtain info for control #mm (No such file or directory)

or

Found hardware: "HDA-Intel" "VIA VT1705" "HDA:11064397,18490397,00100000" "0x1849" "0x0397"
Hardware is initialized using a generic method
/usr/sbin/alsactl: set_control:1328: failed to obtain info for control #1 (No such file or directory)
/usr/sbin/alsactl: set_control:1328: failed to obtain info for control #2 (No such file or directory)
/usr/sbin/alsactl: set_control:1328: failed to obtain info for control #25 (No such file or directory)
/usr/sbin/alsactl: set_control:1328: failed to obtain info for control #26 (No such file or directory)

Simply store ALSA mixer settings again (as root):

# alsactl -f /var/lib/alsa/asound.state store

It may be necessary configure ALSA again with alsamixer

HDA Analyzer

If the mappings to your audio pins(plugs) do not correspond but ALSA works fine, you could try HDA Analyzer -- a pyGTK2 GUI for HD-audio control can be found at the ALSA wiki. Try tweaking the Widget Control section of the PIN nodes, to make microphones IN and headphone jacks OUT. Referring to the Config Defaults heading is a good idea.

NOTE: the script is done by such way that it is incompatible with python3 (which is now shipped with ArchLinux) but tries to use it. The workaround is: open "run.py", find all occurences of "python" (2 occurences - one on the first line, and the second on the last line) and replace them all by "python2".

NOTE2: the script requires root acces, but running it via su/sudo is bogus. Run it via kdesu or gksu.

ALSA with SDL

If you get no sound via SDL and ALSA cannot be chosen from the application. Try setting the environmental variable SDL_AUDIODRIVER to alsa.

# export SDL_AUDIODRIVER=alsa

Low Sound Workaround

If you are facing low sound even after maxing out your speakers/headphones, you can give the softvol plugin a try. Add the following to /etc/asound.conf.

pcm.!default {
      type plug
      slave.pcm "softvol"
  }

pcm.softvol {
    type softvol
    slave {
        pcm "dmix"
    }
    control {
        name "Pre-Amp"
        card 0
    }
    min_dB -5.0
    max_dB 20.0
    resolution 6
}
Note: You'll probably have to restart the computer, as restarting the alsa daemon didn't load the new configuration for me. Also, if the configuration doesn't work even after restarting, try changing plug with hw in the above configuration.

After the changes are loaded successfully, you will see a Pre-Amp section in alsamixer. You can adjust the levels there.

Note: Setting a high value for Pre-Amp can cause sound distortion, so adjust it according to the level that suits you.

Popping sound after resuming from suspension

You might hear a popping sound after resuming the computer from suspension. This can be fixed by editing /etc/pm/sleep.d/90alsa and removing the line that says aplay -d 1 /dev/zero

Example configurations

See Advanced Linux Sound Architecture/Example Configurations.

See also