Difference between revisions of "Amavis"

From ArchWiki
Jump to navigation Jump to search
m (fix templates)
(More content added and fixes. Some style fixes.)
Line 4: Line 4:
 
== Installation and Setup ==
 
== Installation and Setup ==
  
 +
In this setup it is assumed that you are using [[ClamAV]] as anti-virus scanner.
 
* Install {{AUR|amavisd-new}} from the [[AUR]]. You would be wise to also install optdepends such as {{Pkg|p7zip}} and {{Pkg|unrar}} so your filters can actually see inside compressed files.
 
* Install {{AUR|amavisd-new}} from the [[AUR]]. You would be wise to also install optdepends such as {{Pkg|p7zip}} and {{Pkg|unrar}} so your filters can actually see inside compressed files.
* Install [[ClamAV]] from the official repositories.
+
* Install {{pkg|clamav}} from the [[official repositories]].
  
 
=== Basic Configuration ===
 
=== Basic Configuration ===
Line 11: Line 12:
 
* If your hostname is not a FQDN, you must set {{ic|$myhostname}} and {{ic|$mydomain}} accordingly in {{ic|/etc/amavisd/amavisd.conf}}.
 
* If your hostname is not a FQDN, you must set {{ic|$myhostname}} and {{ic|$mydomain}} accordingly in {{ic|/etc/amavisd/amavisd.conf}}.
  
* You can enable ClamAV support by commenting out the following lines like this:
+
* You can enable ClamAV support by commenting out the following lines (don't forget to put the same {{ic|clamd.sock}} as in {{ic|/etc/clamav/clamd.sock}}):
 
{{bc|<nowiki>
 
{{bc|<nowiki>
 
# ### http://www.clamav.net/
 
# ### http://www.clamav.net/
 
['ClamAV-clamd',
 
['ClamAV-clamd',
   \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd.sock"],
+
   \&ask_daemon, ["CONTSCAN {}\n", "/var/lib/clamav/clamd.sock"],
 
   qr/\bOK$/m, qr/\bFOUND$/m,
 
   qr/\bOK$/m, qr/\bFOUND$/m,
 
   qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
 
   qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
Line 25: Line 26:
 
</nowiki>}}
 
</nowiki>}}
  
After that, you can [[start]] {{ic|amavisd.service}} and possibly [[enable]] it.
+
* Add a comment to this line to enable anti-virus scan:
 +
{{bc|1=
 +
# @bypass_virus_check_maps = (1);  # controls running of anti-virus code
 +
}}
 +
 
 +
* Add {{ic|AllowSupplementaryGroups true}} to {{ic|/etc/clamav/clamd.conf}}.
 +
 
 +
* After that, add {{ic|clamav}} user to {{ic|amavis}} group to avoid permission problems:
 +
{{bc|
 +
# usermod -ag amavis clamav
 +
}}
 +
 
 +
Finally restart the services:
 +
* [[restart]] {{ic|clamd.service}}.
 +
* [[start]] {{ic|amavisd.service}} and possibly [[enable]] it.
  
 
Check for errors with these commands:
 
Check for errors with these commands:
Line 125: Line 140:
 
}}
 
}}
  
* Now you just need to restart {{ic|amavisd}} service.
+
* Now you just need to [[restart]] {{ic|amavisd}} service.
  
 
== Final test ==
 
== Final test ==

Revision as of 09:59, 25 April 2015

Amavis gives you an interface between mail servers (MTAs such as Postfix or Dovecot) and mail filters (ClamAV, Spamassassin). In many cases it is more efficient than running separate daemons like spamd.

Installation and Setup

In this setup it is assumed that you are using ClamAV as anti-virus scanner.

Basic Configuration

  • If your hostname is not a FQDN, you must set $myhostname and $mydomain accordingly in /etc/amavisd/amavisd.conf.
  • You can enable ClamAV support by commenting out the following lines (don't forget to put the same clamd.sock as in /etc/clamav/clamd.sock):
# ### http://www.clamav.net/
['ClamAV-clamd',
   \&ask_daemon, ["CONTSCAN {}\n", "/var/lib/clamav/clamd.sock"],
   qr/\bOK$/m, qr/\bFOUND$/m,
   qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
# # NOTE: run clamd under the same user as amavisd - or run it under its own
# #   uid such as clamav, add user clamav to the amavis group, and then add
# #   AllowSupplementaryGroups to clamd.conf;
# # NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
# #   this entry; when running chrooted one may prefer a socket under $MYHOME.
  • Add a comment to this line to enable anti-virus scan:
# @bypass_virus_check_maps = (1);  # controls running of anti-virus code
  • Add AllowSupplementaryGroups true to /etc/clamav/clamd.conf.
  • After that, add clamav user to amavis group to avoid permission problems:
# usermod -ag amavis clamav

Finally restart the services:

Check for errors with these commands:

# systemctl status amavisd
# journalctl -xbo short -u amavisd

Testing

  • To test the new configuration just telnet to the amavisd default listening port:
$ telnet 127.0.0.1 10024
  • You should see something like:
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'
220 [127.0.0.1] ESMTP amavisd-new service ready
  • type ehlo 127.0.0.1:
EHLO localhost
250-[127.0.0.1]
250-VRFY
250-PIPELINING
250-SIZE
250-ENHANCEDSTATUSCODES
250-8BITMIME
250-DSN
250 XFORWARD NAME ADDR PORT PROTO HELO IDENT SOURCE
  • Now just type quit to exit.

Integration with Postfix

Quick start

  • To configure amavis for Postfix add the following to /etc/postfix/master.cf :
#
# anti spam & anti virus section
#
amavisfeed      unix  -    -       n       -       2       smtp
 -o smtp_data_done_timeout=1200
 -o smtp_send_xforward_command=yes
 -o disable_dns_lookups=yes
 -o max_use=20
127.0.0.1:10025 inet n  -       y       -       -       smtpd
 -o content_filter=
 -o smtpd_delay_reject=no
 -o smtpd_client_restrictions=permit_mynetworks,reject
 -o smtpd_helo_restrictions=
 -o smtpd_sender_restrictions=
 -o smtpd_recipient_restrictions=permit_mynetworks,reject
 -o smtpd_data_restrictions=reject_unauth_pipelining
 -o smtpd_end_of_data_restrictions=
 -o smtpd_restrictions_classes=
 -o mynetworks=127.0.0.0/8
 -o smtpd_error_sleep_time=0
 -o smtpd_soft_error_limit=1001 
 -o smtpd_hard_error_limit=1000
 -o smtpd_client_connection_count_limit=0
 -o smtpd_client_connection_rate_limit=0
 -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks,no_milters
 -o local_header_rewrite_clients=
  • In this configuration we assume that postfix and Amavis are running on the same machine (i.e. 127.0.0.1). If that is not the case edit /etc/amavisd/amavisd.conf and the prevous Postfix entry accordingly.
  • Postfix will listen to port 10025 so that Amavis can send back checked emails to that port.
  • You also have to add another other configuration in your smtp or submission sections:
-o content_filter=amavisfeed:[127.0.0.1]:10024

Using this options implies that Postfix will send emails to Amavis on port 10024, so that these can be checked. If mail passes the control then these are sent to port 10025, as explained before.

  • We can now restart postfix.service and amavis.service
  • To check that Postfix is listening on port 10025 do the same operations as the port 10024 case.

SpamAssassin support

Tango-view-fullscreen.pngThis article or section needs expansion.Tango-view-fullscreen.png

Reason: todo (Discuss in Talk:Amavis#)
  • Spamassassin is integrated in Amavis so you do not have to start spamassassin.service. To enable support for Spamassassin comment the following line in /etc/amavis/amavis.conf like this:
# @bypass_spam_checks_maps = (1);  # controls running of anti-spam code
  • Edit the SpamAssassin configuration based on your needs:
$sa_tag_level_deflt  = 1.0;  # add spam info headers if at, or above that level
$sa_tag2_level_deflt = 1.0;  # add 'spam detected' headers at that level
$sa_kill_level_deflt = 5.0;  # triggers spam evasive actions (e.g. blocks mail)
$sa_dsn_cutoff_level = 8;   # spam level beyond which a DSN is not sent
# $sa_quarantine_cutoff_level = 25; # spam level beyond which quarantine is off
$penpals_threshold_high = $sa_kill_level_deflt;  # do not waste time on hi spam
$bounce_killer_score = 100;  # spam score points to add for joe-jobbed bounces
  • Now you just need to restart amavisd service.

Final test

Tango-view-fullscreen.pngThis article or section needs expansion.Tango-view-fullscreen.png

Reason: todo (Discuss in Talk:Amavis#)

To check that everything is working all right:

  • Send a normal email.
  • Send an email with an EICAR file as attachment.
  • Send an email that would result as spam.
  • Check both Postfix and Amavis logs.

See also