Difference between revisions of "Arch32"

From ArchWiki
Jump to: navigation, search
(Chroot Into 32-bit System)
(fix double redirect)
(18 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Poor writing}}
+
#REDIRECT [[Install bundled 32-bit system in 64-bit system]]
 
 
Note: 32-bit chroot for a 64-bit Arch is described in [[Install_bundled_32-bit_system_in_Arch64]] in great detail.
 
 
 
 
 
First we decide where to place the 32bit system. This variable will be used throughout this page for flexibilty. The given value is just what the author used. If you prefer some other location, this is the time to change it.
 
ARCH32_ROOT="/opt/arch32"
 
Now we have to create the directories so that pacman can function and affect changes inside our chroot.
 
mkdir -p $ARCH32_ROOT/var/{cache/pacman/pkg,lib/pacman}
 
Below is a helper script which I place in /usr/local/bin/pacman32. It will allow us to run pacman from our 64bit install and it will affect our chroot only. Make sure that if you are not using the default location, to change it here.
 
#!/bin/bash
 
ARCH32_ROOT="/opt/arch32"
 
PACMAN_EXEC="pacman"
 
 
 
sed -e 's/x86_64/i686/g' /etc/pacman.d/mirrorlist > $ARCH32_ROOT/mirrorlist
 
sed -e 's@/etc/pacman.d/mirrorlist@/opt/arch32/mirrorlist@g' /etc/pacman.conf > $ARCH32_ROOT/pacman.conf
 
 
$PACMAN_EXEC --root $ARCH32_ROOT --cachedir $ARCH32_ROOT/var/cache/pacman/pkg --config $ARCH32_ROOT/pacman.conf "$@"
 
Now we can sync up our 32bit pacman with the repositories.
 
/usr/local/bin/pacman32 -Sy
 
And then we install the bare-minimum that we need to install other 32bit programs and libraries.
 
/usr/local/bin/pacman32 -S filesystem licenses bash sed coreutils gzip
 
We now setup some of the meaningful configuration files.
 
cd $ARCH32_ROOT/etc
 
 
ln -f /etc/passwd*
 
ln -f /etc/shadow*
 
ln -f /etc/group*
 
ln -f /etc/rc.conf
 
ln -f /etc/resolv.conf
 
ln -f /etc/localtime
 
ln -f /etc/locale.gen
 
ln -f /etc/profile.d/locale.sh profile.d
 
ln -f /etc/vimrc
 
cp /etc/mtab .
 
 
 
/usr/local/bin/arch32
 
#!/bin/bash
 
schroot -p -- "$@"
 
 
 
= Alternative Setup (Testing) =
 
 
 
This setup is being tested and so far seems to work well. It is based on the above comments and the more detailed description in [[Install_bundled_32-bit_system_in_Arch64]].
 
 
 
== Create Folder Structure ==
 
 
 
Create folder to store and sync 32-bit system (as root):
 
 
 
# mkdir /opt/arch32
 
 
 
Create pacman folder structure inside new location:
 
 
 
# mkdir -p /opt/arch32/var/{cache/pacman/pkg,lib/pacman}
 
 
 
== Pacman Configuration ==
 
 
 
Copy the pacman config files from 64-bit system and edit pacman sync files to work as 32-bit system. These two commands will copy and change /etc/pacman.conf and /etc/pacman.d/mirrorlist to be saved in /opt/arch32.
 
 
 
# sed -e 's/x86_64/i686/g' /etc/pacman.d/mirrorlist > /opt/arch32/mirrorlist
 
 
 
# sed -e 's@/etc/pacman.d/mirrorlist@/opt/arch32/mirrorlist@g' -e 's/Architecture = auto/Architecture = i686/g' /etc/pacman.conf > /opt/arch32/pacman.conf
 
 
 
N.B. Check that both files in /opt/arch32 point to i686 mirrors - 'Architecture = i686' in /etc/pacman.conf is correct.
 
 
 
== Sync 32-bit System Using 64-bit Pacman Command ==
 
 
 
Use this pacman command to sync files to correct location in /opt/arch32 from 64-bit system:
 
 
 
# pacman --root /opt/arch32 --cachedir /opt/arch32/var/cache/pacman/pkg --config /opt/arch32/pacman.conf -Sy
 
 
 
Some of the repositories may not work when syncing, e.g. multilib.
 
 
 
Once pacman is synchronised, install minimum packages:
 
 
 
# pacman --root /opt/arch32 --cachedir /opt/arch32/var/cache/pacman/pkg --config /opt/arch32/pacman.conf -S filesystem licenses bash sed coreutils gzip pacman (nano make file gawk grep gcc)
 
 
 
Extra packages in brackets are useful for compiling packages in 32-bit system, e.g. from AUR
 
 
 
Create links in 32-bit system from useful conf files in 64-bit system (some are optional), first change to /opt/arch32/etc directory:
 
 
 
# cd /opt/arch32/etc
 
 
 
Run these commands, including '.' character (during the testing only those marked with required have been needed)
 
 
 
ln -f /etc/passwd* .
 
ln -f /etc/shadow* .
 
ln -f /etc/group* .
 
ln -f /etc/rc.conf .
 
ln -f /etc/resolv.conf .    '''--> required'''
 
ln -f /etc/localtime .
 
ln -f /etc/locale.gen .    '''--> required'''
 
ln -f /etc/profile.d/locale.sh profile.d
 
ln -f /etc/vimrc .
 
cp /etc/mtab .
 
 
 
== Create Chroot Environment Scripts ==
 
 
 
Copy bash script below and save as arch32 in /etc/rc.d/
 
 
 
#!/bin/bash
 
 
. /etc/rc.conf
 
. /etc/rc.d/functions
 
 
dirs=(/dev /dev/pts /dev/shm /tmp /home)
 
case $1 in
 
    start)
 
        stat_busy "Starting Arch32 chroot"
 
        for d in "${dirs[@]}"; do
 
        mount -o bind $d /opt/arch32/$d
 
        done
 
        mount -t proc none /opt/arch32/proc
 
        mount -t sysfs none /opt/arch32/sys
 
        add_daemon arch32
 
        stat_done
 
        ;;
 
    stop)
 
        stat_busy "Stopping Arch32 chroot"
 
        for (( i = ${#dirs[@]} - 1; i >= 0; i-- )); do
 
        umount "/opt/arch32${dirs[i]}"
 
        done
 
        umount /opt/arch32/{proc,sys}
 
        rm_daemon arch32
 
        stat_done
 
        ;;
 
    restart)
 
        $0 stop
 
        sleep 1
 
        $0 start
 
        ;;
 
    *)
 
        echo "usage: $0 {start|stop|restart}"
 
esac
 
exit 0
 
 
 
 
 
Then make script executable
 
 
 
# chmod +x /etc/rc.d/arch32
 
 
 
 
 
In the other descriptions, arch32 daemon was added to /etc/rc.conf. When this daemon is running from start-up, the 64-bit pacman commands to sync to the 32-bit system above don't seem to work properly. This bash script below, executed as user, to chroot into new 32-bit system gets round that problem. Useful for testing....
 
 
 
 
 
#!/bin/bash
 
 
# Start chroot daemon
 
sudo /etc/rc.d/arch32 start
 
 
# Give users access to Xserver (install xorg-xhost if command not found)
 
xhost +                   
 
 
# Chroot into 32-bit system
 
sudo chroot /opt/arch32
 
 
# To leave chroot type 'exit' then environment is cleaned up.....
 
xhost -
 
sudo /etc/rc.d/arch32 stop
 
 
 
'''N.B.''' The command:
 
 
 
# xhost +
 
 
 
seems to work better than the suggested method:
 
 
 
# xhost +SI:localuser:username
 
 
 
== Chroot Into 32-bit System ==
 
 
 
Run shell script as user (named arch32.sh in this instance) to chroot in 32-bit system.
 
'''N.B.''' At this stage all commands are being run as root.
 
 
 
To distinguish between command prompts when running inside the 32-bit system, try altering the bash prompt to signify what is running,
 
 
 
e.g copy your user's .bashrc file into the root's home folder inside 32-bit system, /opt/arch32/root and comment out the usual bash prompt line:
 
 
 
PS1='[\u@\h \W]\$ '
 
 
 
and add:
 
 
 
PS1="\[\e[1;34m\][arch32][\u@\h \w]: "
 
 
 
This command will change the text colour to blue and put [arch32] before the normal information. Colour Bash prompt changes are found [https://wiki.archlinux.org/index.php/Color_Bash_Prompt here]
 
 
 
Set locale:
 
 
 
# locale-gen
 
 
 
Modify pacman config files inside 32-bit system: uncomment required mirrors in /etc/pacman.d/mirrorlist and as before, change 'Architecture' entry from 'auto' to 'i686' in /etc/pacman.conf
 
 
 
Add any additional [https://wiki.archlinux.org/index.php/Unofficial_User_Repositories repositories] and sync:
 
 
 
# pacman -Sy
 
 
 
and install some software:
 
 
 
# pacman -S firefox
 
 
 
N.B. At this point there's no need to add any video drivers, but fonts are needed:
 
 
 
# pacman -S ttf-dejavu ttf-liberation
 
 
 
Run program:
 
 
 
# firefox
 
 
 
== Exiting 32-bit system ==
 
 
 
Type:
 
 
 
# exit
 

Revision as of 15:02, 7 December 2014