Arch filesystem hierarchy
Template:Article summary start Template:Article summary text Template:Article summary end Arch Linux is among the many distributions that follow the filesystem hierarchy standard. In addition to explaining each directory along with their designations, this article also covers Arch-specific modifications.
- 1 Filesystem Hierarchy Standard
- 2 Directorys
- 2.1 The root filesystem
- 2.2 /bin: Essential command binaries
- 2.3 /boot: Static bootloader files
- 2.4 /dev: Device files
- 2.5 /etc: Host-specific configuration
- 2.6 /home: User directories
- 2.7 /lib: Essential shared libraries and kernel modules
- 2.8 /lost+found: Filesystem-specific recoverable data
- 2.9 /media: Mount points for removable media
- 2.10 /mnt: Temporary mount points
- 2.11 /opt: Problematic packages
- 2.12 /proc: Process information
- 2.13 /root: Administrator directory
- 2.14 /run
- 2.15 /sbin: System binaries
- 2.16 /srv: Service data
- 2.17 /tmp: Temporary files
- 2.18 /usr: Shareable, read-only data
- 2.19 /var: Variable files
- 2.19.1 /var/abs
- 2.19.2 /var/cache/pacman/pkg
- 2.19.3 /var/lib: State information
- 2.19.4 /var/lock: Unsharable lock data
- 2.19.5 /var/log: Log files
- 2.19.6 /var/mail: User mail
- 2.19.7 /var/run: State information
- 2.19.8 /var/spool: Queues
- 2.19.9 /var/tmp: Preservable temporary files
- 3 See also
Filesystem Hierarchy Standard
- "The filesystem standard has been designed to be used by Unix distribution developers, package developers, and system implementors. However, it is primarily intended to be a reference and is not a tutorial on how to manage a Unix filesystem or directory hierarchy."
Shareable files are defined as those that can be stored on one host and used on others. Unshareable files are those that are not shareable. For example, the files in user home directories are shareable whereas device lock files are not.
Static files include binaries, libraries, documentation files and other files that do not change without system administrator intervention. Variable files are defined as files that are not static.
The root filesystem
The root filesystem, represented by the slash symbol by itself (/), is the primary filesystem from which all other filesystems stem; the top of the hierarchy. All files and directories appear under the root directory "/", even if they are stored on different physical devices. The contents of the root filesystem must be adequate to boot, restore, recover, and/or repair the system.
/bin: Essential command binaries
The place for binaries that must be available in single user mode and accessible by all users (e.g., cat, ls, cp). /bin/ provides programs that must be available even if only the partition containing / is mounted. This situation may arise should one need to repair other partitions but have no access to shared directories (i.e. you are in single user mode and therefore have no network access). Unlike /sbin, the /bin directory contains several useful commands that are of use to both the root user as well as non-root users.
/boot: Static bootloader files
Unsharable, static directory containing the kernel and ramdisk images as well as the bootloader configuration file, and bootloader stages. /boot also stores data that is used before the kernel begins executing userspace programs. This may include saved master boot sectors and sector map files.
/dev: Device files
Essential device nodes created by udev during the boot process and as machine hardware is discovered by events. This directory highlights one important aspect of the UNIX filesystem - everything is a file or a directory. Exploring this directory will reveal many files, each representing a hardware component of the system. The majority of devices are either block or character devices; however other types of devices exist and can be created. In general, 'block devices' are devices that store or hold data, whereas 'character devices' can be thought of as devices that transmit or transfer data. For example, hard disk drives and optical drives are categorized as block devices while serial ports, mice and USB ports are all character devices.
/etc: Host-specific configuration
Host-specific, unsharable configuration files shall be placed in the /etc directory. If more than one configuration file is required for an application, it is customary to use a subdirectory in order to keep the /etc/ area as clean as possible. It is considered good practice to make frequent backups of this directory as it contains all system related configuration files.
Some daemon scripts will have a matching configuration file in this directory that contains some useful default values. When a daemon is started, it will first source the settings from its configuration file within this directory, and then source /etc/rc.conf. Arch's simple, transparent scripting approach means you can easily centralize all your daemon configuration options in your /etc/rc.conf simply by setting an appropriate variable value, or, split up your configuration over multiple files if you prefer a decentralized approach to this issue.
All Arch daemons reside here. Custom scripts may also be placed here and invoked from the DAEMONS= array in /etc/rc.conf
Configuration files for the X Window System
xinit configuration files. 'xinit' is a configuration method of starting up an X session that is designed to be used as part of a script.
Global xinitrc file, used by all X sessions started by xinit (startx). Its usage is of course overridden by a .xinitrc file located in the home directory of a user.
/home: User directories
UNIX is a multi-user environment. Therefore, each user is also assigned a specific directory that is accessible only to them and to the root user. These are the user home directories, which can be found under '/home/$USER' (~/). Within their home directory, a user can write files, delete them, install programs, etc. Users' home directories contain their data and personal configuration files, the so-called 'dot files' (their name is preceded by a dot), which are 'hidden'. To view dotfiles, enable the appropriate option in your file manager or run ls with the -a switch. If there is a conflict between personal and system wide configuration files, the settings in the personal file will prevail. Dotfiles most likely to be altered by the end user include .xinitrc and .bashrc files. The configuration files for xinit and Bash respectively. They allow the user the ability to change the window manager to be started upon login and also aliases, user-specified commands and environment variables respectively. When a user is created, their dotfiles shall be taken from the /etc/skel directory where system sample files reside.
Directory /home can become quite large as it is typically used for storing downloads, compiling, installing and running programs, mail, collections of multimedia files etc.
/libdirectory becomes a symlink to
/usr/lib. Here is the news. If you encounter error during this update. Please see DeveloperWiki:usrlib for solution.
Contains kernel modules and essential shared library images (the C programming code library) needed to boot the system and run the commands under /bin/ and /sbin/. Libraries are collections of frequently used program routines and are readily identifiable through their filename extension of *.so. They are essential for basic system functionality. Kernel modules (drivers) are in the subdirectory /lib/modules/<kernel-version>.
/lost+found: Filesystem-specific recoverable data
UNIX-like operating systems must execute a proper shutdown sequence. At times, a system might crash or a power failure might take the machine down. Either way, at the next boot, a filesystem check using the fsck program shall be performed. Fsck will go through the system and try to recover any corrupt files that it finds. The result of this recovery operation will be placed in this directory. The files recovered are not likely to be complete or make much sense but there always is a chance that something worthwhile is recovered.
/media: Mount points for removable media
CDROMs, DVD's, and USB sticks shall have an appropriate mount point under /media/. The motivation for the creation of this directory has been that historically there have been a number of other different places used to mount removable media such as /cdrom, /mnt or /mnt/cdrom. Placing the mount points for all removable media directly in the root directory would potentially result in a large number of extra directories in /. Although the use of subdirectories in /mnt as a mount point has recently been common, it conflicts with a much older tradition of using /mnt directly as a temporary mount point. Therefore, Arch allocates /media as the mount point for removable media. On systems where more than one device exists for mounting a certain type of media, mount directories shall be created by appending a digit to the name of those available above starting with '0', but the unqualified name must also exist.
The "hal" (Hardware Abstraction Layer) daemon mounts removable media to /media as /media/<name_of_removable_filesystem>
/mnt: Temporary mount points
This is a generic mount point for temporary filesystems or devices. Mounting is the process of making a filesystem available to the system. After mounting, files will be accessible under the mount-point. Additional mount-points (subdirectories) may be created under /mnt/. There is no limitation to creating a mount-point anywhere on the system, but by convention and for practicality, littering a file system with mount-points should be avoided.
/opt: Problematic packages
Packages and large static files that do not fit cleanly into the above GNU filesystem layout can be placed in /opt. A package placing files in the /opt/ directory creates a directory bearing the same name as the package. This directory in turn holds files that otherwise would be scattered throughout the file system. For example, the acrobat package has Browser, Reader, and Resource directories sitting at the same level as the bin directory. This doesn't fit into a normal GNU filesystem layout, so Arch places all the files in a subdirectory of /opt.
/proc: Process information
Directory /proc is very special in that it is also a virtual filesystem. It is sometimes referred to as the process information pseudo-file system. It doesn't contain 'real' files, but rather, runtime system information (e.g. system memory, devices mounted, hardware configuration, etc). For this reason it can be regarded as a control and information center for the kernel. In fact, quite a lot of system utilities are simply calls to files in this directory. For example, 'lsmod' is the same as 'cat /proc/modules' while 'lspci' is a synonym for 'cat /proc/pci'. By altering files located in this directory, kernel parameters may be read/changed (sysctl) while the system is running.
The most distinctive facet about files in this directory is the fact that all of them have a file size of 0, with the exception of kcore, mounts and self.
/root: Administrator directory
Home directory of the System Administrator, 'root'. This may be somewhat confusing, ('/root under root') but historically, '/' was root's home directory (hence the name of the Administrator account). To keep things tidier, 'root' eventually got his own home directory. Why not in '/home'? Because '/home' is often located on a different partition or even on another system and would thus be inaccessible to 'root' when - for some reason - only '/' is mounted.
The /run mountpoint is supposed to be a tmpfs mounted during early boot, available and writable to for all tools at any time during bootup. systemd, udev or mdadm that are required early in the boot process require this directory, because /var can be implemented as a separate file system to be mounted at a later stage in the start-up process. It replaces /var/run/, which becomes a symlink of /run.
/sbin: System binaries
UNIX discriminates between 'normal' executables and those used for system maintenance and/or administrative tasks. The latter reside either here or - the less important ones - in /usr/sbin. Programs executed after /usr is known to be mounted (when there are no problems) are generally placed into /usr/sbin. This directory contains binaries that are essential to the working of the system. These include system administration as well as maintenance and hardware configuration programs. GRUB (the command), fdisk, init, route, ifconfig, etc., all reside here.
/srv: Service data
Site-specific data which is served by the system. The main purpose of specifying this is so that users may find the location of the data files for a particular service, and so that services which require a single tree for read-only data, writable data and scripts (such as CGI scripts) can be reasonably placed. Data of interest to a specific user shall be placed in that user's home directory.
/tmp: Temporary files
This directory contains files that are required temporarily. Many programs use this to create lock files and for temporary storage of data. Do not remove files from this directory unless you know exactly what you are doing! Many of these files are important for currently running programs and deleting them may result in a system crash. On most systems, this directory is cleared out at boot or at shutdown by the local system. The basis for this was historical precedent and common practice.
While root is the primary filesystem, /usr is the secondary hierarchy, for user data, containing the majority of (multi-)user utilities and applications. /usr is shareable, read-only data. This means that /usr shall be shareable between various hosts and must not be written to, except in the case of system administrator intervention (installation, update, upgrade). Any information that is host-specific or varies with time is stored elsewhere.
Aside from /home/, /usr/ usually contains by far the largest share of data on a system. Hence, this is one of the most important directories in the system as it contains all the user binaries, their documentation, libraries, header files, etc. X and its supporting libraries can be found here. User programs like telnet, ftp, etc., are also placed here. In the original UNIX implementations, /usr/ (for user), was where the home directories of the system's users were placed (that is to say, /usr/someone was then the directory now known as /home/someone). Over time, /usr/ has become where userspace programs and data (as opposed to 'kernelspace' programs and data) reside. The name has not changed, but its meaning has narrowed and lengthened from everything user related to user usable programs and data. As such, the backronym 'User System Resources' was created.
Non-essential command binaries (not needed in single user mode); for all users. This directory contains the vast majority of binaries (applications) on your system. Executables in this directory vary widely. For instance vi, gcc, and gnome-session reside here.
/usr/include: Header files
Header files needed for compiling userspace source code..
Libraries for the binaries in /usr/bin/ and /usr/sbin/.
/usr/sbin: System binaries
Non-essential system binaries of use to the system administrator. This is where the network daemons for the system reside, along with other binaries that (generally) only the system administrator has access to, but which are not required for system maintenance and repair. Normally, these directories are never part of normal user's $PATHs, only of root's (PATH is an environment variable that controls the sequence of locations that the system will attempt to look in for commands).
This directory contains 'shareable', architecture-independent files (docs, icons, fonts etc). Note, however, that '/usr/share' is generally not intended to be shared by different operating systems or by different releases of the same operating system. Any program or package which contains or requires data that do not need to be modified should store these data in '/usr/share/' (or '/usr/local/share/', if manually installed - see below). It is recommended that a subdirectory be used in /usr/share for this purpose.
/usr/src: Source code
The 'linux' sub-directory holds the Linux kernel sources, and header-files.
/usr/local: Local hierarchy
Optional tertiary hierarchy for local data. The original idea behind '/usr/local' was to have a separate ('local') '/usr/' directory on every machine besides '/usr/', which might be mounted read-only from somewhere else. It copies the structure of '/usr/'. These days, '/usr/local/' is widely regarded as a good place in which to keep self-compiled or third-party programs. This directory is empty by default in Arch Linux. It may be used for manually compiled software installations if desired. pacman installs to /usr/, therefore, manually compiled/installed software installed to /usr/local/ may peacefully co-exist with pacman-tracked system software.
/var: Variable files
Variable files, such as logs, spool files, and temporary e-mail files. On Arch, the ABS tree and pacman cache also reside here. Why not put the variable and transient data into /usr/? Because there might be circumstances when /usr/ is mounted as read-only, e.g. if it is on a CD or on another computer. '/var/' contains variable data, i.e. files and directories the system must be able to write to during operation, whereas /usr/ shall only contain static data. Some directories can be put onto separate partitions or systems, e.g. for easier backups, due to network topology or security concerns. Other directories have to be on the root partition, because they are vital for the boot process. 'Mountable' directories are: '/home', '/mnt', '/tmp', '/usr' and '/var'. Essential for booting are: '/bin', '/boot', '/dev', '/etc', '/lib', '/proc' and '/sbin'.
The ABS tree. A ports-like package build system hierarchy containing build scripts within subdirectories corresponding to all installable Arch software.
The pacman package cache.
/var/lib: State information
Persistent data modified by programs as they run (e.g. databases, packaging system metadata etc.).
/var/lock: Unsharable lock data
/var/lockwill be replaced by symlinks to
Files keeping track of resources currently in use.
/var/log: Log files
/var/mail: User mail
Shareable directory for users' mailboxes.
/var/run: State information
/var/run/run. Unshareable data about the running system since last boot (e.g. currently logged-in users and running daemons).
Spool for tasks waiting to be processed (e.g. print queues and unread mail).
Deprecated location for users' mailboxes.
/var/tmp: Preservable temporary files
Temporary files to be preserved between reboots.