Difference between revisions of "Archboot"

From ArchWiki
Jump to: navigation, search
(Create archboot chroots)
(Restore Usbstick)
(44 intermediate revisions by 2 users not shown)
Line 7: Line 7:
 
* It is designed for installation or rescue operation.
 
* It is designed for installation or rescue operation.
 
* It only runs in RAM, without any special filesystems like squashfs, thus it is limited to the RAM which is installed in your system.
 
* It only runs in RAM, without any special filesystems like squashfs, thus it is limited to the RAM which is installed in your system.
{{bc|pacman -S archboot}}
+
[[pacman|Install]] {{pkg|archboot}} from the [[official repositories]].
 +
 
 +
==The difference to the archiso install media==
 +
* It provides an additional interactive setup and quickinst script.
 +
* It contains [core] repository on media.
 +
* It supports UEFI_CD boot.
 +
* It runs a modified Arch Linux system in initramfs.
 +
* It is restricted to RAM usage, everything which is not necessary like
 +
: man or info pages etc. is not provided.
 +
* It doesn't mount anything during boot process.
 +
* It supports remote installation through ssh.
 +
 
 
==Archboot ISO Releases==
 
==Archboot ISO Releases==
* Hybrid image files and torrents are provided, which include i686 and/or x86_64 core repository.
+
* Hybrid image files and torrents are provided, which include i686/x86_64 and [core] repository,
* Please read the according Changelog files for RAM limitations.
+
: network labeled images don't include [core] repository.
 
* Please check md5sum before using it.
 
* Please check md5sum before using it.
* [https://downloads.archlinux.de/iso/archboot/2013.03 Download 2013.03 „2k13-R1“] / [ftp://ftp.archlinux.org/iso/archboot/Changelog-2013.03-1.txt Changelog] / [https://bbs.archlinux.org/viewtopic.php?id=150833 Forum thread]
+
* [https://downloads.archlinux.de/iso/archboot/2013.08 Download 2013.08 „2k13-R2“] / [ftp://ftp.archlinux.org/iso/archboot/Changelog-2013.08-1.txt Changelog] / [https://bbs.archlinux.org/viewtopic.php?id=166552 Forum thread]
 +
: kernel: 3.10.9
 +
: pacman: 4.1.2
 +
: RAM recommendations: 512 MB
 +
 
 
===Burning Release===
 
===Burning Release===
 
Hybrid image file is a standard CD-burnable image and also a raw disk image.  
 
Hybrid image file is a standard CD-burnable image and also a raw disk image.  
Line 18: Line 33:
 
* Can be raw-written to a drive using 'dd' or similar utilities. This method is intended for use with USB thumb drives.
 
* Can be raw-written to a drive using 'dd' or similar utilities. This method is intended for use with USB thumb drives.
 
{{bc|1='dd if=<imagefile> of=/dev/<yourdevice> bs=1M'}}
 
{{bc|1='dd if=<imagefile> of=/dev/<yourdevice> bs=1M'}}
===Supported boot modes of Archboot media===
 
* It supports BIOS booting with syslinux.
 
* It supports UEFI booting with gummiboot and EFISTUB,
 
: for booting LTS kernels with efilinux-efi .
 
:  (only UEFI USB is supported, UEFI CD booting is not supported!)
 
* It supports grub's iso loopback support.
 
: variables used (below for example):
 
: iso_loop_dev=UUID=XXXX
 
: iso_loop_path=/blah/archboot.iso
 
* It supports booting using syslinux's memdisk (only in BIOS mode).
 
  
 
===PXE booting / Rescue system===
 
===PXE booting / Rescue system===
[https://downloads.archlinux.de/iso/archboot/2013.03/boot Download 2013.03 „2k13-R1“] needed files from the directory.
+
[https://downloads.archlinux.de/iso/archboot/2013.08/boot Download 2013.08 „2k13-R2“] needed files from the directory.
 
* vmlinuz_i686 + initramfs_i686.img (i686)
 
* vmlinuz_i686 + initramfs_i686.img (i686)
 
* vmlinuz_x86_64 +  initramfs_x86_64.img(x86_64)
 
* vmlinuz_x86_64 +  initramfs_x86_64.img(x86_64)
* vmlinuz_i686_lts + initramfs_i686.img (i686 LTS kernel)
 
* vmlinuz_x86_64_lts +  initramfs_x86_64.img (x86_64 LTS kernel)
 
 
* For PXE booting add the kernel and initrd to your tftp setup and you will get a running installation/rescue system.
 
* For PXE booting add the kernel and initrd to your tftp setup and you will get a running installation/rescue system.
 
* For Rescue booting add an entry to your bootloader pointing to the kernel and initrd.
 
* For Rescue booting add an entry to your bootloader pointing to the kernel and initrd.
  
===News===
+
===Supported boot modes of Archboot media===
2013.03 „2k13-R1“
+
* It supports BIOS booting with syslinux.
* major update/cleanup on all components
+
* It supports UEFI/UEFI_CD booting with gummiboot and EFISTUB.
====General====
+
* It supports Secure Boot with prebootloader.
* kernel 3.8.3 / LTS kernel 3.0.69
+
* It supports grub(2)'s iso loopback support.
* pacman 4.0.3 usage
+
: variables used (below for example):
* RAM recommendations: 768 MB
+
: iso_loop_dev=PARTUUID=XXXX
====Kernel changes====
+
: iso_loop_path=/blah/archboot.iso
* bump to latest 3.8.x series and bump lts to latest 3.0.x series
+
{{bc|1=menuentry "Archboot" --class iso {
====Environment changes====
+
loopback loop (hdX,X)/<archboot.iso>
* updated pacman mirrorlist
+
linux (loop)/boot/vmlinuz_x86_64 iso_loop_dev=/dev/sdXX iso_loop_path=/<archboot.iso>
* replaced netcfg with netctl
+
initrd (loop)/boot/initramfs_x86_64.img
* removed ide-legacy hook
+
}
* replaced arch_virtio, arch_fw with block hook
+
}}
* replaced usbinput with keyboard hook
+
* It supports booting using syslinux's memdisk (only in BIOS mode).
* replaced dbus-core with dbus
+
{{bc|1=menuentry "Archboot Memdisk" {
* bump to latest mkinitcpio code
+
  linux16 /memdisk iso
* bump syslinux from 4.x to 5.0
+
  initrd16 hd(X,X)/<archboot.iso>
* removed bind and dnsutils
+
}
* blacklist floppy module during boot
+
}}
  
====setup changes====
+
===How to do a remote installation with ssh?===
* replaced netcfg network setup with netctl
+
* During boot all network interfaces will try to obtain an IP address through dhcp.
* always install netctl instead of netcfg
+
* root password is not set by default! If you need privacy during installation set a password.
* replaced gummiboot-efi with gummiboot
+
{{bc|1='ssh root@<yourip>'}}
* removed initscripts compat mode
+
* always install systemd-sysvcompat
+
* updated gummiboot install routine
+
* updated refind install routine
+
* removed persistent soundcard and network hack,
+
: systemd handles everything now.
+
* no need to add hostname to /etc/hosts anymore
+
 
+
====quickinst changes====
+
* removed initscripts compat mode
+
* removed rc.conf hint
+
* removed double check on ntfs
+
 
+
===History===
+
History of old releases can be found [ftp://ftp.archlinux.org/iso/archboot/history here].
+
===The difference to the archiso install media===
+
* It provides an additional interactive setup and quickinst script.
+
* It contains [core] repository on media.
+
* It provides the long time support kernel as boot and installation option.
+
* It runs a modified Arch Linux system in initramfs.
+
* It is restricted to RAM usage, everything which is not necessary like
+
: man or info pages etc. is not provided.
+
* It doesn't mount anything during boot process.
+
  
 
===Interactive setup features===
 
===Interactive setup features===
Line 94: Line 74:
 
* Preparing storage disk, like auto-prepare, partitioning, GUID (gpt) support, 4k sector drive support etc.
 
* Preparing storage disk, like auto-prepare, partitioning, GUID (gpt) support, 4k sector drive support etc.
 
* Creation of software raid/raid partitions, lvm2 devices and luks encrypted devices
 
* Creation of software raid/raid partitions, lvm2 devices and luks encrypted devices
* Supports standard linux,raid/raid_partitions,dmraid,lvm2 and encrypted devices
+
* Supports standard linux,raid/raid_partitions,dmraid/fakeraid,lvm2 and encrypted devices
* Filesystem support: ext2/3/4, btrfs, nilfs2, reiserfs,xfs,jfs,ntfs-3g,vfat
+
* Filesystem support: ext2/3/4, btrfs, f2fs, nilfs2, reiserfs,xfs,jfs,ntfs-3g,vfat
 
* Name scheme support: PARTUUID, PARTLABEL, FSUUID, FSLABEL and KERNEL
 
* Name scheme support: PARTUUID, PARTLABEL, FSUUID, FSLABEL and KERNEL
* Mount support of grub loopback and memdisk installation media
+
* Mount support of grub(2) loopback and memdisk installation media
 
* Package selection support
 
* Package selection support
* Signed package installation
 
 
* hwdetect script is used for preconfiguration
 
* hwdetect script is used for preconfiguration
* Auto/Preconfiguration of framebuffer, uvesafb, kms mode, fstab, mkinitcpio.conf, systemd, crypttab and mdadm.conf
+
* Auto/Preconfiguration of fstab, kms mode, mkinitcpio.conf, systemd, crypttab and mdadm.conf
 
* Configuration of basic system files
 
* Configuration of basic system files
 
* Setting root password
 
* Setting root password
* grub-bios, grub-efi-x86_64, grub-efi-i386, refind-efi-x86_64, gummiboot, efilinux-efi, lilo, extlinux/syslinux, bootloader support
+
* grub(2) (BIOS and UEFI), refind-efi, gummiboot, syslinux (BIOS and UEFI) bootloader support
  
 
===Bootparameters===
 
===Bootparameters===
Line 128: Line 107:
 
: rootflags=<comma-separated-array>
 
: rootflags=<comma-separated-array>
 
: rootflags=subvol=root,compress,ssd
 
: rootflags=subvol=root,compress,ssd
* advanced
 
: This will override advanced hooks running order for your system.
 
: Default order is arch_mdadm,arch_lvm2,arch_encrypt
 
: Advanced hooks are: arch_mdadm,arch_lvm2,arch_encrypt
 
: Usage:
 
: advanced=hook1,hook2,hook3
 
: advanced=arch_encrypt,arch_mdadm
 
* arch-addons
 
: You want to load external addon packages or configs into the install environment.
 
: Place external addon packages in /packages directory of your external device.
 
: Place external configs in /config directory of your external device.
 
 
====Video and framebuffer options====
 
* uvesafb
 
: enables uvesafb mode during boot and activates setup routine to use it later on installed system.
 
: you need to specify your supported resolution eg.:
 
: uvesafb=<resolution>-<depth>
 
: uvesafb=1024x768-16
 
* fbmodule
 
: Loads the fb module you specify durin boot process and activates setup routine to use it later on installed system.
 
: Use it like this fbmodule=<yourmodule>, e.g. fbmodule=cirrusfb
 
  
 
===FAQ, Known Issues and limitations===
 
===FAQ, Known Issues and limitations===
Line 154: Line 112:
 
* Check also the forum threads for posted fixes and workarounds.
 
* Check also the forum threads for posted fixes and workarounds.
 
* Why screen stays blank or other weird screen issues happen?
 
* Why screen stays blank or other weird screen issues happen?
:: Some hardware doesn't like the KMS activation, use radeon.modeset=0 or i915.modeset=0 on boot prompt.
+
:: Some hardware doesn't like the KMS activation, use radeon.modeset=0, i915.modeset=0 or nouveau.modeset=0 on boot prompt.
* dmraid might be broken on some boards, support is not perfect here.  
+
* dmraid/fakeraid might be broken on some boards, support is not perfect here.  
:: The reason is there are so many different hardware components out there. At the moment 1.0.0rc16 is included, with latest fedora patchset.
+
:: The reason is there are so many different hardware components out there. At the moment 1.0.0rc16 is included, with latest fedora patchset, development has been stopped.
 +
:: mdadm supports some isw and ddf fakeraid chipsets, but assembling during boot is deactivated in /etc/mdadm.conf!
 
* grub2 cannot detect correct bios boot order:
 
* grub2 cannot detect correct bios boot order:
 
:: It may happen that hd(x,x) entries are not correct, thus first reboot may not work.  
 
:: It may happen that hd(x,x) entries are not correct, thus first reboot may not work.  
 
:: Reason: grub cannot detect bios boot order.  
 
:: Reason: grub cannot detect bios boot order.  
:: Fix: Either change bios boot order or change menu.lst to correct entries after successful boot. This cannot be fixed it is a restriction in grub/grub2!
+
:: Fix: Either change bios boot order or change menu.lst to correct entries after successful boot. This cannot be fixed it is a restriction in grub2!
 
* Why is parted used in setup routine, instead of cfdisk in msdos partitiontable mode?
 
* Why is parted used in setup routine, instead of cfdisk in msdos partitiontable mode?
 
:: parted is the only linux partition program that can handle all type of things the setup routine offers.
 
:: parted is the only linux partition program that can handle all type of things the setup routine offers.
Line 167: Line 126:
 
:: cfdisk is still included but has to be run in an other terminal.
 
:: cfdisk is still included but has to be run in an other terminal.
  
===UEFI hints===
+
===History===
* [https://wiki.archlinux.org/index.php/Unified_Extensible_Firmware_Interface#Archboot Create UEFI bootable USB from ISO]
+
History of old releases can be found [ftp://ftp.archlinux.org/iso/archboot/history here].
* [https://wiki.archlinux.org/index.php/Unified_Extensible_Firmware_Interface#Archboot_2 Remove UEFI boot support from ISO]
+
  
 
===Bugs===
 
===Bugs===
 
[https://bugs.archlinux.org Arch Linux Bugtracker]
 
[https://bugs.archlinux.org Arch Linux Bugtracker]
 +
 +
==Archboot BETA ISO Release==
 +
* Hybrid image file is provided, which only supports network installation.
 +
* Please read the according Changelog files for RAM limitations.
 +
* Please check md5sum before using it.
 +
* No beta ISO available at the moment.
  
 
==Links==
 
==Links==
 
* [https://projects.archlinux.org/archboot.git/ GIT repository]
 
* [https://projects.archlinux.org/archboot.git/ GIT repository]
==Restore Usbstick==
+
==Howto: Create image files==
Take care about which device actually is your USB stick. The next command will render all data on /dev/sdX inaccessible.
+
* First, wipe the bootsector of the USB stick:
+
{{bc|1=
+
dd if=/dev/zero of=/dev/sdX bs=512 count=1
+
}}
+
* Then, create a new FAT32 partition on the stick and write a FAT32 filesystem on it (vfat or type b in fdisk terminology):
+
{{bc|
+
fdisk /dev/sdX <<EOF
+
n
+
p
+
1
+
 
+
t
+
b
+
w
+
EOF
+
 
+
mkdosfs -F32 /dev/sdX1
+
}}
+
 
+
==Create image files==
+
===Archboot Allinone ISO Howto===
+
 
(Quick regeneration of installation media with latest available core packages)
 
(Quick regeneration of installation media with latest available core packages)
====Requirements====
+
===Requirements===
 
* x86_64 architecture
 
* x86_64 architecture
* archboot ISO
 
 
* ~ 3GB free space on disk
 
* ~ 3GB free space on disk
====Create archboot chroots====
+
 
 +
===Create archboot chroots===
 
{{bc|
 
{{bc|
 
# install archboot
 
# install archboot
Line 213: Line 155:
 
linux32 pacman --root "<i686_chroot>" -S base --noconfirm --noprogressbar
 
linux32 pacman --root "<i686_chroot>" -S base --noconfirm --noprogressbar
 
}}
 
}}
* Mount and copy the following files to each chroot:
+
 
 +
* Enter archboot x86_64 container:
 
{{bc|
 
{{bc|
mount -o bind /dev <chrootpath>/dev
+
systemd-nspawn --capability&#61;CAP_MKNOD -M $1-$(uname -m) -D <x86_64_chroot>
mount -o bind /tmp <chrootpath>/tmp
+
mount -o bind /sys <chrootpath>/sys
+
mount -o bind /proc <chrootpath>/proc
+
cp -a /etc/mtab <chrootpath>/etc/mtab
+
cp /etc/resolv.conf  <chrootpath>/etc/resolv.conf
+
 
}}
 
}}
* Enter archboot x86_64 chroot:
+
* Enter archboot i686 container:
 
{{bc|
 
{{bc|
chroot <chrootpath>
+
linux32 systemd-nspawn --capability&#61;CAP_MKNOD -M $1-$(uname -m) -D <i686_chroot>
}}
+
* Enter archboot i686 chroot:
+
{{bc|
+
linux32 chroot <chrootpath>
+
 
}}
 
}}
  
====Install archboot and update to latest packages====
+
===Install archboot and update to latest packages===
 
{{bc|
 
{{bc|
 
# install in both chroots archboot:
 
# install in both chroots archboot:
Line 239: Line 173:
 
}}
 
}}
  
====Generate images====
+
===Generate images===
 
{{bc|
 
{{bc|
 
# run in both chroots (needs quite some time ...)
 
# run in both chroots (needs quite some time ...)
Line 246: Line 180:
 
archboot-allinone.sh -g
 
archboot-allinone.sh -g
 
}}
 
}}
* Finished you get a burnable iso image, a rawwrite usb image and a hybrid image which is both in one.
+
* Finished you get a bunch of images.
* Do not forget to unmount for each chroot after leaving:
+
{{bc|
+
umount <chrootpath>/dev
+
umount <chrootpath>/tmp
+
umount <chrootpath>/sys
+
umount <chrootpath>/proc
+
}}
+
  
 
Have fun!
 
Have fun!
 
tpowa
 
tpowa
 
(Archboot Developer)
 
(Archboot Developer)

Revision as of 15:16, 26 August 2013

What is Archboot?

  • Archboot is a set of scripts to generate bootable media for CD/USB/PXE.
  • It is designed for installation or rescue operation.
  • It only runs in RAM, without any special filesystems like squashfs, thus it is limited to the RAM which is installed in your system.

Install archboot from the official repositories.

The difference to the archiso install media

  • It provides an additional interactive setup and quickinst script.
  • It contains [core] repository on media.
  • It supports UEFI_CD boot.
  • It runs a modified Arch Linux system in initramfs.
  • It is restricted to RAM usage, everything which is not necessary like
man or info pages etc. is not provided.
  • It doesn't mount anything during boot process.
  • It supports remote installation through ssh.

Archboot ISO Releases

  • Hybrid image files and torrents are provided, which include i686/x86_64 and [core] repository,
network labeled images don't include [core] repository.
kernel: 3.10.9
pacman: 4.1.2
RAM recommendations: 512 MB

Burning Release

Hybrid image file is a standard CD-burnable image and also a raw disk image.

  • Can be burned to CD(RW) media using most CD-burning utilities.
  • Can be raw-written to a drive using 'dd' or similar utilities. This method is intended for use with USB thumb drives.
'dd if=<imagefile> of=/dev/<yourdevice> bs=1M'

PXE booting / Rescue system

Download 2013.08 „2k13-R2“ needed files from the directory.

  • vmlinuz_i686 + initramfs_i686.img (i686)
  • vmlinuz_x86_64 + initramfs_x86_64.img(x86_64)
  • For PXE booting add the kernel and initrd to your tftp setup and you will get a running installation/rescue system.
  • For Rescue booting add an entry to your bootloader pointing to the kernel and initrd.

Supported boot modes of Archboot media

  • It supports BIOS booting with syslinux.
  • It supports UEFI/UEFI_CD booting with gummiboot and EFISTUB.
  • It supports Secure Boot with prebootloader.
  • It supports grub(2)'s iso loopback support.
variables used (below for example):
iso_loop_dev=PARTUUID=XXXX
iso_loop_path=/blah/archboot.iso
menuentry "Archboot" --class iso {
loopback loop (hdX,X)/<archboot.iso>
linux (loop)/boot/vmlinuz_x86_64 iso_loop_dev=/dev/sdXX iso_loop_path=/<archboot.iso>
initrd (loop)/boot/initramfs_x86_64.img
}
  • It supports booting using syslinux's memdisk (only in BIOS mode).
menuentry "Archboot Memdisk" {
   linux16 /memdisk iso
   initrd16 hd(X,X)/<archboot.iso>
}

How to do a remote installation with ssh?

  • During boot all network interfaces will try to obtain an IP address through dhcp.
  • root password is not set by default! If you need privacy during installation set a password.
'ssh root@<yourip>'

Interactive setup features

  • Media and Network installation mode
  • Changing keymap and consolefont
  • Changing time and date
  • Setup network with netctl
  • Preparing storage disk, like auto-prepare, partitioning, GUID (gpt) support, 4k sector drive support etc.
  • Creation of software raid/raid partitions, lvm2 devices and luks encrypted devices
  • Supports standard linux,raid/raid_partitions,dmraid/fakeraid,lvm2 and encrypted devices
  • Filesystem support: ext2/3/4, btrfs, f2fs, nilfs2, reiserfs,xfs,jfs,ntfs-3g,vfat
  • Name scheme support: PARTUUID, PARTLABEL, FSUUID, FSLABEL and KERNEL
  • Mount support of grub(2) loopback and memdisk installation media
  • Package selection support
  • hwdetect script is used for preconfiguration
  • Auto/Preconfiguration of fstab, kms mode, mkinitcpio.conf, systemd, crypttab and mdadm.conf
  • Configuration of basic system files
  • Setting root password
  • grub(2) (BIOS and UEFI), refind-efi, gummiboot, syslinux (BIOS and UEFI) bootloader support

Bootparameters

General boot parameters

  • earlymodules
load modules before hooks are executed
Usage:
earlymodules=<comma-separated-array>
earlymodules=ahci,ehci-hcd
  • disablehooks
disable a hook which is run during bootup
Usage:
disablehooks=<comma-separated-array>
disablehooks=arch_floppy,arch_cdrom
  • root
Using this option will boot you into your specified existing system.
Usage:
root=/dev/<your-root-of-installed-system>
root=/dev/sda3
  • rootflags
Using this option will pass special mount options for your root device
Usage:
rootflags=<comma-separated-array>
rootflags=subvol=root,compress,ssd

FAQ, Known Issues and limitations

  • Release specific known issues and workarounds are posted in changelog files.
  • Check also the forum threads for posted fixes and workarounds.
  • Why screen stays blank or other weird screen issues happen?
Some hardware doesn't like the KMS activation, use radeon.modeset=0, i915.modeset=0 or nouveau.modeset=0 on boot prompt.
  • dmraid/fakeraid might be broken on some boards, support is not perfect here.
The reason is there are so many different hardware components out there. At the moment 1.0.0rc16 is included, with latest fedora patchset, development has been stopped.
mdadm supports some isw and ddf fakeraid chipsets, but assembling during boot is deactivated in /etc/mdadm.conf!
  • grub2 cannot detect correct bios boot order:
It may happen that hd(x,x) entries are not correct, thus first reboot may not work.
Reason: grub cannot detect bios boot order.
Fix: Either change bios boot order or change menu.lst to correct entries after successful boot. This cannot be fixed it is a restriction in grub2!
  • Why is parted used in setup routine, instead of cfdisk in msdos partitiontable mode?
parted is the only linux partition program that can handle all type of things the setup routine offers.
cfdisk cannot handle GPT/GUID nor it can allign partitions correct with 1MB spaces for 4k sector disks.
cfdisk is a nice tool but is too limited to be the standard partitioner anymore.
cfdisk is still included but has to be run in an other terminal.

History

History of old releases can be found here.

Bugs

Arch Linux Bugtracker

Archboot BETA ISO Release

  • Hybrid image file is provided, which only supports network installation.
  • Please read the according Changelog files for RAM limitations.
  • Please check md5sum before using it.
  • No beta ISO available at the moment.

Links

Howto: Create image files

(Quick regeneration of installation media with latest available core packages)

Requirements

  • x86_64 architecture
  • ~ 3GB free space on disk

Create archboot chroots

# install archboot
pacman -S archboot
mkdir <x86_64_chroot>
pacman --root "<x86_64_chroot>" -S base --noconfirm --noprogressbar
mkdir <i686_chroot>
linux32 pacman --root "<i686_chroot>" -S base --noconfirm --noprogressbar
  • Enter archboot x86_64 container:
systemd-nspawn --capability=CAP_MKNOD -M $1-$(uname -m) -D <x86_64_chroot>
  • Enter archboot i686 container:
linux32 systemd-nspawn --capability=CAP_MKNOD -M $1-$(uname -m) -D <i686_chroot>

Install archboot and update to latest packages

# install in both chroots archboot:
pacman -S archboot
# update in both chroots to latest available packages
pacman -Syu

Generate images

# run in both chroots (needs quite some time ...)
archboot-allinone.sh -t
# put the generated tarballs in one directory and run (needs quite some time ...)
archboot-allinone.sh -g
  • Finished you get a bunch of images.

Have fun! tpowa (Archboot Developer)