- 1 What is Archboot?
- 2 Archboot ISO Releases
- 2.1 Burning Release
- 2.2 Supported boot modes of Archboot media
- 2.3 PXE booting / Rescue system
- 2.4 News
- 2.5 History
- 2.6 The difference to the archiso install media
- 2.7 Interactive setup features
- 2.8 Bootparameters
- 2.9 FAQ, Known Issues and limitations
- 2.10 UEFI hints
- 2.11 Bugs
- 3 Links
- 4 Restore Usbstick
- 5 Create image files
What is Archboot?
- Archboot is a set of scripts to generate bootable media for CD/USB/PXE.
- It is designed for installation or rescue operation.
- It only runs in RAM, without any special filesystems like squashfs, thus it is limited to the RAM which is installed in your system.
Archboot ISO Releases
- Hybrid image files and torrents are provided, which include i686 and/or x86_64 core repository.
- Please read the according Changelog files for RAM limitations.
- Please check md5sum before using it.
- Download 2013.03 „2k13-R1“ / Changelog / Forum thread
Hybrid image file is a standard CD-burnable image and also a raw disk image.
- Can be burned to CD(RW) media using most CD-burning utilities.
- Can be raw-written to a drive using 'dd' or similar utilities. This method is intended for use with USB thumb drives.
'dd if=<imagefile> of=/dev/<yourdevice> bs=1M'
Supported boot modes of Archboot media
- It supports BIOS booting with syslinux.
- It supports UEFI booting with gummiboot and EFISTUB,
- for booting LTS kernels with efilinux-efi .
- (only UEFI USB is supported, UEFI CD booting is not supported!)
- It supports grub's iso loopback support.
- variables used (below for example):
- It supports booting using syslinux's memdisk (only in BIOS mode).
PXE booting / Rescue system
Download 2013.03 „2k13-R1“ needed files from the directory.
- vmlinuz_i686 + initramfs_i686.img (i686)
- vmlinuz_x86_64 + initramfs_x86_64.img(x86_64)
- vmlinuz_i686_lts + initramfs_i686.img (i686 LTS kernel)
- vmlinuz_x86_64_lts + initramfs_x86_64.img (x86_64 LTS kernel)
- For PXE booting add the kernel and initrd to your tftp setup and you will get a running installation/rescue system.
- For Rescue booting add an entry to your bootloader pointing to the kernel and initrd.
- major update/cleanup on all components
- kernel 3.8.4 / LTS kernel 3.0.70
- pacman 4.0.3 usage
- RAM recommendations: 768 MB
- bump to latest 3.8.x series and bump lts to latest 3.0.x series
- updated pacman mirrorlist
- replaced netcfg with netctl
- removed ide-legacy hook
- replaced arch_virtio, arch_fw with block hook
- replaced usbinput with keyboard hook
- replaced dbus-core with dbus
- bump to latest mkinitcpio code
- bump syslinux from 4.x to 5.0
- removed bind and dnsutils
- blacklist floppy module during boot
- replaced netcfg network setup with netctl
- always install netctl instead of netcfg
- replaced gummiboot-efi with gummiboot
- removed initscripts compat mode
- always install systemd-sysvcompat
- updated gummiboot install routine
- updated refind install routine
- removed persistent soundcard and network hack,
- systemd handles everything now.
- no need to add hostname to /etc/hosts anymore
- removed initscripts compat mode
- removed rc.conf hint
- removed double check on ntfs
History of old releases can be found here.
The difference to the archiso install media
- It provides an additional interactive setup and quickinst script.
- It contains [core] repository on media.
- It provides the long time support kernel as boot and installation option.
- It runs a modified Arch Linux system in initramfs.
- It is restricted to RAM usage, everything which is not necessary like
- man or info pages etc. is not provided.
- It doesn't mount anything during boot process.
Interactive setup features
- Media and Network installation mode
- Changing keymap and consolefont
- Changing time and date
- Setup network with netctl
- Preparing storage disk, like auto-prepare, partitioning, GUID (gpt) support, 4k sector drive support etc.
- Creation of software raid/raid partitions, lvm2 devices and luks encrypted devices
- Supports standard linux,raid/raid_partitions,dmraid,lvm2 and encrypted devices
- Filesystem support: ext2/3/4, btrfs, nilfs2, reiserfs,xfs,jfs,ntfs-3g,vfat
- Name scheme support: PARTUUID, PARTLABEL, FSUUID, FSLABEL and KERNEL
- Mount support of grub loopback and memdisk installation media
- Package selection support
- Signed package installation
- hwdetect script is used for preconfiguration
- Auto/Preconfiguration of framebuffer, uvesafb, kms mode, fstab, mkinitcpio.conf, systemd, crypttab and mdadm.conf
- Configuration of basic system files
- Setting root password
- grub-bios, grub-efi-x86_64, grub-efi-i386, refind-efi-x86_64, gummiboot, efilinux-efi, lilo, extlinux/syslinux, bootloader support
General boot parameters
- load modules before hooks are executed
- disable a hook which is run during bootup
- Using this option will boot you into your specified existing system.
- Using this option will pass special mount options for your root device
- This will override advanced hooks running order for your system.
- Default order is arch_mdadm,arch_lvm2,arch_encrypt
- Advanced hooks are: arch_mdadm,arch_lvm2,arch_encrypt
- You want to load external addon packages or configs into the install environment.
- Place external addon packages in /packages directory of your external device.
- Place external configs in /config directory of your external device.
Video and framebuffer options
- enables uvesafb mode during boot and activates setup routine to use it later on installed system.
- you need to specify your supported resolution eg.:
- Loads the fb module you specify durin boot process and activates setup routine to use it later on installed system.
- Use it like this fbmodule=<yourmodule>, e.g. fbmodule=cirrusfb
FAQ, Known Issues and limitations
- Release specific known issues and workarounds are posted in changelog files.
- Check also the forum threads for posted fixes and workarounds.
- Why screen stays blank or other weird screen issues happen?
- Some hardware doesn't like the KMS activation, use radeon.modeset=0 or i915.modeset=0 on boot prompt.
- dmraid might be broken on some boards, support is not perfect here.
- The reason is there are so many different hardware components out there. At the moment 1.0.0rc16 is included, with latest fedora patchset.
- grub2 cannot detect correct bios boot order:
- It may happen that hd(x,x) entries are not correct, thus first reboot may not work.
- Reason: grub cannot detect bios boot order.
- Fix: Either change bios boot order or change menu.lst to correct entries after successful boot. This cannot be fixed it is a restriction in grub/grub2!
- Why is parted used in setup routine, instead of cfdisk in msdos partitiontable mode?
- parted is the only linux partition program that can handle all type of things the setup routine offers.
- cfdisk cannot handle GPT/GUID nor it can allign partitions correct with 1MB spaces for 4k sector disks.
- cfdisk is a nice tool but is too limited to be the standard partitioner anymore.
- cfdisk is still included but has to be run in an other terminal.
Take care about which device actually is your USB stick. The next command will render all data on /dev/sdX inaccessible.
- First, wipe the bootsector of the USB stick:
wipefs -a /dev/sdX
- Then, create a new FAT32 partition on the stick and write a FAT32 filesystem on it (vfat or type b in fdisk terminology):
fdisk /dev/sdX <<EOF n p 1 t b w EOF mkdosfs -F32 /dev/sdX1
Create image files
Archboot Allinone ISO Howto
(Quick regeneration of installation media with latest available core packages)
- x86_64 architecture
- archboot ISO
- ~ 3GB free space on disk
Create archboot chroots
# install archboot pacman -S archboot mkdir <x86_64_chroot> pacman --root "<x86_64_chroot>" -S base --noconfirm --noprogressbar mkdir <i686_chroot> linux32 pacman --root "<i686_chroot>" -S base --noconfirm --noprogressbar
- Mount and copy the following files to each chroot:
mount -o bind /dev <chrootpath>/dev mount -o bind /tmp <chrootpath>/tmp mount -o bind /sys <chrootpath>/sys mount -o bind /proc <chrootpath>/proc cp -a /etc/mtab <chrootpath>/etc/mtab cp /etc/resolv.conf <chrootpath>/etc/resolv.conf
- Enter archboot x86_64 chroot:
- Enter archboot i686 chroot:
linux32 chroot <chrootpath>
Install archboot and update to latest packages
# install in both chroots archboot: pacman -S archboot # update in both chroots to latest available packages pacman -Syu
# run in both chroots (needs quite some time ...) archboot-allinone.sh -t # put the generated tarballs in one directory and run (needs quite some time ...) archboot-allinone.sh -g
- Finished you get a burnable iso image, a rawwrite usb image and a hybrid image which is both in one.
- Do not forget to unmount for each chroot after leaving:
umount <chrootpath>/dev umount <chrootpath>/tmp umount <chrootpath>/sys umount <chrootpath>/proc
Have fun! tpowa (Archboot Developer)