Avahi is a free Zero Configuration Networking (Zeroconf) implementation, including a system for multicast DNS/DNS-SD service discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. It is licensed under the GNU Lesser General Public License (LGPL). (Source: Wikipedia:Avahi (software))
- 1 Installation
- 2 Using Avahi
- 3 See also
# pacman -S avahi nss-mdns
dbusdaemon before you can start
Enable Avahi daemon
You can enable Avahi Daemon at startup with the following command:
# systemctl enable avahi-daemon.service
Obtaining IPv4LL IP address
By default, if you are getting IP using DHCP, you are using
dhcpcd package. It can attempt to obtain an IPv4LL address if it failed to get one via DHCP. By default this option is disabled. To enable it, comment noipv4ll string:
... #noipv4ll ...
avahi-autoipd, included in
# avahi-autoipd -D
Avahi also allows you to access computers using their hostnames. Note: you must install
nss-mdns for this to work, and have the
avahi-daemon.service enabled and running.
Suppose you have machines with names maple, fig and oak, all running avahi. Avahi can be set up so that you do not have to manage a
/etc/hosts file for each computer. Instead you can simply use
maple.local to access whatever services
maple has. However by default, .local querying is disabled in Arch Linux. To enable it edit the file
/etc/nsswitch.conf and change the line:
hosts: files myhostname dns
hosts: files myhostname mdns_minimal [NOTFOUND=return] dns
mdns_minimal module handles queries for the .local TLD only. In case you have configured Avahi to use a different TLD, you'll also need to add the full
mdns module at the end. There also are IPv4-only and IPv6-only modules
Avahi includes several utilities which help you discover the services running on a network. For example, run
to discover services in your network.
avahi-discover (Avahi Zeroconf Browser) shows the various services on your network. You can also browse SSH and VNC Servers using
There's a good list of software with Avahi support at their website: http://avahi.org/wiki/Avah4users
avahi-discoverneeds pygtk and python-dbus to be installed.
If you have an NFS share set up, you can use Avahi to be able to automount them in Zeroconf-enabled browsers (such as Konqueror on KDE and Finder on Mac OS X). Create a .service file in /etc/avahi/services with the following:
<?xml version="1.0" standalone='no'?> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name replace-wildcards="yes">NFS Music Share on %h</name> <service> <type>_nfs._tcp</type> <port>2049</port> <txt-record>path=/data/shared/Music</txt-record> </service> </service-group>
The port is correct if you have insecure as an option in your /etc/exports; otherwise, it needs to be changed (note that insecure is needed for OS X clients). The path is the path to your export, or a subdirectory of it. For some reason the automount functionality has been removed from Leopard, however a script is available. This was based upon this post.
<?xml version="1.0" standalone='no'?> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name replace-wildcards="yes">Samba Shares on %h</name> <service> <type>_smb._tcp</type> <port>139</port> </service> </service-group>
You can grab Arch User Repository and have shared files between the LAN, with no configuration, no hours in samba hacking, no nothing - it just works.AUR from the
Sourced from ubuntuforums.org. If you would rather use a regular ftp service, install vsftpd and avahi. Change the settings of vsftpd according to what is shown on the ubuntuforums page or according to your own personal preferences (See 'man vsftpd.conf).
Create a ftp.service file in /etc/avahi/services and paste in that file
<?xml version="1.0" standalone='no'?> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name>FTP file sharing</name> <service> <type>_ftp._tcp</type> <port>21</port> </service> </service-group>
When you are done, (re)start avahi-daemon and vsftpd in your /etc/rc.d directory.
/etc/rc.d/avahi-daemon restart /etc/rc.d/vsftpd restart
After that you should be able to browse through the ftp server from another computer in your network. The steps shown in this section are created so that the ftp server is 'advertised' by avahi to the local Zeroconf network.
Unless you are using GNOME or KDE, you might not be able to log in to the ftp server directly through your file manager, and so you will have to use a ftp client pointed to the IP address of the server or the hostname of the machine (as shown in this section).
Giver is a mono program that allows simple file-sharing between two desktops when both are running Giver. All you need to do is click and drag the file to the name or picture of the person you wish to send the file to.
A package is on the AUR.
Note that this depends on gnome-sharp, which has heavy GNOME dependencies.
Link-Local (Bonjour/Zeroconf) chat
Avahi can be used for bonjour protocol support under linux. The following chat clients support link-local chat.
Gajim is a Jabber/XMPP instant messenger client written in PyGTK. In the accounts setup just enable "Local" account.
Pidgin is an instant messaging client that supports quite a few commonly used IM protocols. In addition to these, it supports Bonjour.
Just select 'Bonjour' as the protocol type when you add an account, and enter a username. The first and last name you enter in the 'Advanced' tab will be what the other person (whom you are chatting with) sees, and 'local alias' under 'User Options' in the 'Basic' tab will be what you see of your own name (you could try putting in something like I, me or myself).
Once this is done, other Pidgin (iChat) users who are on the local network will see you and be able to chat with you. To implement file-sharing, you just send and receive files like you would do with a regular IM session.
Kopete is the KDE equivalent of Pidgin. It supports the Bonjour/Link-local XMPP protocol. One need to create an account in Kopete, by simply entering the desired name.
Telpathy is a communication framework which supports different protocols using plugins. The plugin provides support for Bonjour/Link-Local XMPP protocol. Empathy is a GNOME front-end to Telepathy. Officially, KDE does not support Telepathy, but work is going on which will eventually replace Kopete. KDE Telepathy is available in extra.
Airprint from Mobile Devices
Avahi along with CUPS also provides the capability to print to just about any printer from airprint compatible mobile devices. In order to enable print capability from your device, simply create an avahi service file for your printer in /etc/avahi/services and restart avahi. An example of a generic services file for an HP-Laserjet printer would be similar to the following with the name, rp, ty, adminurl and note fields changed. Save the file as /etc/avahi/services/youFileName.service:
<?xml version="1.0" standalone='no'?> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name>yourPrnterName</name> <service> <type>_ipp._tcp</type> <subtype>_universal._sub._ipp._tcp</subtype> <port>631</port> <txt-record>txtver=1</txt-record> <txt-record>qtotal=1</txt-record> <txt-record>rp=printers/yourPrnterName</txt-record> <txt-record>ty=yourPrnterName</txt-record> <txt-record>adminurl=http://126.96.36.199:631/printers/yourPrnterName</txt-record> <txt-record>note=Office Laserjet 4100n</txt-record> <txt-record>priority=0</txt-record> <txt-record>product=virtual Printer</txt-record> <txt-record>printer-state=3</txt-record> <txt-record>printer-type=0x801046</txt-record> <txt-record>Transparent=T</txt-record> <txt-record>Binary=T</txt-record> <txt-record>Fax=F</txt-record> <txt-record>Color=T</txt-record> <txt-record>Duplex=T</txt-record> <txt-record>Staple=F</txt-record> <txt-record>Copies=T</txt-record> <txt-record>Collate=F</txt-record> <txt-record>Punch=F</txt-record> <txt-record>Bind=F</txt-record> <txt-record>Sort=F</txt-record> <txt-record>Scan=F</txt-record> <txt-record>pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/urf</txt-record> <txt-record>URF=W8,SRGB24,CP1,RS600</txt-record> </service> </service-group>Alternatively, https://raw.github.com/tjfontaine/airprint-generate/master/airprint-generate.py can be used to generate Avahi service files. It depends on python2 and pycups. The script can be run using:
# python2 airprint-generate.py -d /etc/avahi/services
Be sure to open UDP port 5353 if you're using iptables:
# iptables -A INPUT -p udp -m udp --dport 5353 -j ACCEPT
If you're following the more-than-useful Simple Stateful Firewall format for your firewall:
# iptables -A UDP -p udp -m udp --dport 5353 -j ACCEPT