This Broadcom chipset sometimes does not behave well unless you specify the order of the modules to be loaded. The modules are broadcom and tg3, the former needed to be loaded first.
These steps should help if you computer has this chipset:
$ lspci | grep Ethernet 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
If your wired networking isn't functioning in some way or another, try unplugging your cable then doing the following (as root):
# modprobe -r tg3 # modprobe broadcom # modprobe tg3
Now plug you network cable in. If this solves your problems you can make this permanent in any of the following ways (just pick one!).
Add broadcom and tg3 (in order) to your MODULES line in /etc/mkinitcpio.conf or /etc/rc.conf:
MODULES=".. broadcom tg3 .."
If you added it to /etc/mkinitcpio.conf you will have to run this command:
# mkinitcpio -p linux
Or you can add these lines to /etc/rc.local (for example):
#!/bin/bash # # /etc/rc.local: Local multi-user startup script. # modprobe -r tg3 modprobe broadcom modprobe tg3