Difference between revisions of "BIND"

From ArchWiki
Jump to: navigation, search
(removed the slave server, it does not belong in such an introductory and simple tutorial)
(reorderd the article, put the most important info on top. the example still needs more information)
Line 3: Line 3:
 
Berkeley Internet Name Daemon (BIND) is the reference implementation of the Domain Name System (DNS) protocols.
 
Berkeley Internet Name Daemon (BIND) is the reference implementation of the Domain Name System (DNS) protocols.
  
== BIND as caching-only server ==
+
== Installation ==
These few steps show you how to install BIND as a local caching-only server.
+
These few steps show you how to install BIND and set it up as a local caching-only server.
  
=== Install BIND ===
 
 
[[pacman|Install]] the {{Pkg|bind}} package which can be found in the [[Official Repositories|official repositories]].
 
[[pacman|Install]] the {{Pkg|bind}} package which can be found in the [[Official Repositories|official repositories]].
  
Edit {{ic|/etc/named.conf}} and add this under the options section:
+
Optionally edit {{ic|/etc/named.conf}} and add this under the options section, to only allow connections from the localhost:
 
  listen-on { 127.0.0.1; };
 
  listen-on { 127.0.0.1; };
  
=== Start BIND ===
+
Edit {{ic|/etc/resolv.conf}} to use the local DNS server:
Start the daemon:
+
systemctl start named
+
 
+
Optionally, set it to start up on boot:
+
systemctl enable named
+
 
+
=== Set /etc/resolv.conf to use the local DNS server ===
+
Edit {{ic|/etc/resolv.conf}}:
+
 
  nameserver 127.0.0.1
 
  nameserver 127.0.0.1
  
== BIND as simple DNS forwarder ==
+
[[Daemon#Managing daemons|Start]] the '''named''' daemon.
If you have problems with, for example, VPN connections, they can sometimes be solved by setting-up a forwarding DNS server. This is very simple with BIND. Add these lines to {{ic|/etc/named.conf}}, and change IP address according to your setup.
+
listen-on { 192.168.66.1; };
+
forwarders { 8.8.8.8; 8.8.4.4; };
+
Don't forget to restart the service!
+
  
== Running BIND in a chrooted environment ==
+
== A configuration template for running a domain ==
Running in a [[chroot]] environment is not required but improves security. See [[BIND (chroot)]] for how to do this.
+
This is a simple tutorial in howto setup a simple home network DNS-server with bind. In our example we use "domain.tld" as our domain.
  
== A configuration template for running a domain ==
+
For a more elaborate example see [http://www.howtoforge.com/two_in_one_dns_bind9_views Two-in-one DNS server with BIND9].
In our example we use "domain.tld" as our domain.
+
  
 
=== 1. Creating a zonefile ===
 
=== 1. Creating a zonefile ===
Line 72: Line 58:
 
  };
 
  };
  
Change {{ic|listen-on { 127.0.0.1; };}} to {{ic|listen-on { 127.0.0.1; };}} if you want other computers to make use of your DNS server.
+
Restart the daemon and you are done.
  
Restart the services and you are done.
+
== BIND as simple DNS forwarder ==
 +
If you have problems with, for example, VPN connections, they can sometimes be solved by setting-up a forwarding DNS server. This is very simple with BIND. Add these lines to {{ic|/etc/named.conf}}, and change IP address according to your setup.
 +
listen-on { 192.168.66.1; };
 +
forwarders { 8.8.8.8; 8.8.4.4; };
 +
Don't forget to restart the service!
  
For a more elaborate example see [http://www.howtoforge.com/two_in_one_dns_bind9_views Two-in-one DNS server with BIND9].
+
== Running BIND in a chrooted environment ==
 +
Running in a [[chroot]] environment is not required but improves security. See [[BIND (chroot)]] for how to do this.
  
 
== Configuring BIND to serve DNSSEC signed zones ==
 
== Configuring BIND to serve DNSSEC signed zones ==

Revision as of 02:34, 16 December 2012

Berkeley Internet Name Daemon (BIND) is the reference implementation of the Domain Name System (DNS) protocols.

Installation

These few steps show you how to install BIND and set it up as a local caching-only server.

Install the bind package which can be found in the official repositories.

Optionally edit /etc/named.conf and add this under the options section, to only allow connections from the localhost:

listen-on { 127.0.0.1; };

Edit /etc/resolv.conf to use the local DNS server:

nameserver 127.0.0.1

Start the named daemon.

A configuration template for running a domain

This is a simple tutorial in howto setup a simple home network DNS-server with bind. In our example we use "domain.tld" as our domain.

For a more elaborate example see Two-in-one DNS server with BIND9.

1. Creating a zonefile

# nano /var/named/domain.tld.zone
$TTL 7200
; domain.tld
@       IN      SOA     ns01.domain.tld. postmaster.domain.tld. (
                                        2007011601 ; Serial
                                        28800      ; Refresh
                                        1800       ; Retry
                                        604800     ; Expire - 1 week
                                        86400 )    ; Minimum
                IN      NS      ns01
                IN      NS      ns02
ns01            IN      A       0.0.0.0
ns02            IN      A       0.0.0.0
localhost       IN      A       127.0.0.1
@               IN      MX 10   mail
imap            IN      CNAME   mail
smtp            IN      CNAME   mail
@               IN      A       0.0.0.0
www             IN      A       0.0.0.0
mail            IN      A       0.0.0.0
@               IN      TXT     "v=spf1 mx"

$TTL defines the default time-to-live in seconds for all record types. In this example it is 2 hours.

Serial must be incremented manually before restarting named every time you change a resource record for the zone. If you forget to do it slaves will not re-transfer the zone: they only do it if the serial is greater than that of the last time they transferred the zone.

2. Configuring master server

Add your zone to /etc/named.conf:

zone "domain.tld" IN {
        type master;
        file "domain.tld.zone";
        allow-update { none; };
        notify no;
};

Restart the daemon and you are done.

BIND as simple DNS forwarder

If you have problems with, for example, VPN connections, they can sometimes be solved by setting-up a forwarding DNS server. This is very simple with BIND. Add these lines to /etc/named.conf, and change IP address according to your setup.

listen-on { 192.168.66.1; };
forwarders { 8.8.8.8; 8.8.4.4; };

Don't forget to restart the service!

Running BIND in a chrooted environment

Running in a chroot environment is not required but improves security. See BIND (chroot) for how to do this.

Configuring BIND to serve DNSSEC signed zones

See DNSSEC#BIND (serving signed DNS zones)

Automatically listen on new interfaces without chroot and root privileges

Add

 interface-interval <rescan-timeout-in-minutes>;

parameter into named.conf options. Then you should modify rc-script:

     stat_busy "Starting DNS"
-    [ -z "$PID" ] && /usr/sbin/named ${NAMED_ARGS}
+    setcap cap_net_bind_service=eip /usr/sbin/named
+    NAMED_ARGS=`echo ${NAMED_ARGS} | sed 's#-u [[:alnum:]]*##'`
+    [ -z "$PID" ] && sudo -u named /usr/sbin/named ${NAMED_ARGS}

So your /etc/rc.d/named should look like this:

     stat_busy "Starting DNS"
     setcap cap_net_bind_service=eip /usr/sbin/named
     NAMED_ARGS=`echo ${NAMED_ARGS} | sed 's#-u [[:alnum:]]*##'`
     [ -z "$PID" ] && sudo -u named /usr/sbin/named ${NAMED_ARGS}

Change user name in last line (with "... sudo -u named ...") if your named user is not 'named'.

See also

BIND Resources