Difference between revisions of "Backlight"

From ArchWiki
Jump to: navigation, search
(setpci method)
Line 5: Line 5:
 
==Adjustment==
 
==Adjustment==
 
===setpci method===
 
===setpci method===
It is possible to set the register of the graphic card to adjust the backlight
+
It is possible to set the register of the graphic card to adjust the backlight. It means you adjust the backlight by manipulating the hardware which is not a good idea. And also not all of the graphic card support this method.
 +
By using this method, you need "lspci" first to find out where is your graphic card.
 
  setpci -s 00:02.0 F4.B=0
 
  setpci -s 00:02.0 F4.B=0
  

Revision as of 15:22, 15 May 2011

Introduction

Actually there are many ways to adjust the backlight of laptop screen. Sometimes only some of them are available on some kinds of the laptop. This article tries to summarize all possible ways to adjust the backlight.

Adjustment

setpci method

It is possible to set the register of the graphic card to adjust the backlight. It means you adjust the backlight by manipulating the hardware which is not a good idea. And also not all of the graphic card support this method. By using this method, you need "lspci" first to find out where is your graphic card.

setpci -s 00:02.0 F4.B=0

ACPI method

It is possible to adjust the laptop by ACPI. But sometimes ACPI doesn't work well due to different implementation on mother board. You could use following command in grub to adjust ACPI model.

acpi_osi=Linux 
acpi_backlight=vendor

xbacklight method

You also could adjust the backlight through the xorg-server command.

xbacklight