Difference between revisions of "Backlight"

From ArchWiki
Jump to navigation Jump to search
m (avoid repeat by transferring repeating concepts in the overview)
m (ACPI: why root (memento special:diff/325454))
Line 21: Line 21:
The name of the folder depends on the graphics card model.
The name of the folder depends on the graphics card model.
{{hc|# ls /sys/class/backlight/|
{{hc|$ ls /sys/class/backlight/|
Line 29: Line 29:
The directory contains the following files and folders:
The directory contains the following files and folders:
{{hc|# ls /sys/class/backlight/acpi_video0/|
{{hc|$ ls /sys/class/backlight/acpi_video0/|
actual_brightness  brightness        max_brightness    subsystem/    uevent             
actual_brightness  brightness        max_brightness    subsystem/    uevent             
bl_power          device/            power/            type
bl_power          device/            power/            type
Line 36: Line 36:
The maximum brightness can be found by reading from {{ic|max_brightness}}, which is often 15.
The maximum brightness can be found by reading from {{ic|max_brightness}}, which is often 15.
{{hc|# cat /sys/class/backlight/acpi_video0/max_brightness|
{{hc|$ cat /sys/class/backlight/acpi_video0/max_brightness|
Line 42: Line 42:
The brightness can be set by writing a number to {{ic|brightness}}. Attempting to set a brightness greater than the maximum results in an error.
The brightness can be set by writing a number to {{ic|brightness}}. Attempting to set a brightness greater than the maximum results in an error.
  # tee /sys/class/backlight/acpi_video0/brightness <<< 5
  $ echo 5 | sudo tee /sys/class/backlight/acpi_video0/brightness
By default, only {{ic|root}} can change the brightness by this method.  To allow users in the {{ic|video}} group to change the brightness, a [[udev]] rule such as the following can be used:
By default, only {{ic|root}} can change the brightness by this method.  To allow users in the {{ic|video}} group to change the brightness, a [[udev]] rule such as the following can be used:

Revision as of 11:51, 4 November 2018

Screen brightness might be tricky to control. On some machines physical hardware switches are missing and software solutions may not work well. However, it is generally possible to find a functional method for a given hardware. This article aims to summarize all possible ways to adjust the backlight.


There are many ways to control brightness of a monitor, laptop or integrated panel (such as the iMac). According to this discussion and this wiki page the control method can be divided into these categories:

  • brightness is controlled by vendor-specified hotkey and there is no interface for the OS to adjust the brightness.
  • brightness is controlled by either the ACPI or the graphic driver.
  • brightness is controlled by HW register through setpci.

All methods are exposed to the user through /sys/class/backlight and xrandr/xbacklight can choose one method to control brightness. It is still not very clear which one xbacklight prefers by default.


The brightness of the screen backlight is adjusted by setting the power level of the backlight LEDs or cathodes. The power level can often be controlled using the ACPI kernel module for video. An interface to this module is provided via a sysfs directory at /sys/class/backlight/.

The name of the folder depends on the graphics card model.

$ ls /sys/class/backlight/

In this case, the backlight is managed by an ATI graphics card. In the case of an Intel card it is called intel_backlight. In the following example, acpi_video0 is used.

The directory contains the following files and folders:

$ ls /sys/class/backlight/acpi_video0/
actual_brightness  brightness         max_brightness     subsystem/    uevent             
bl_power           device/            power/             type

The maximum brightness can be found by reading from max_brightness, which is often 15.

$ cat /sys/class/backlight/acpi_video0/max_brightness

The brightness can be set by writing a number to brightness. Attempting to set a brightness greater than the maximum results in an error.

$ echo 5 | sudo tee /sys/class/backlight/acpi_video0/brightness

By default, only root can change the brightness by this method. To allow users in the video group to change the brightness, a udev rule such as the following can be used:

ACTION=="add", SUBSYSTEM=="backlight", KERNEL=="acpi_video0", RUN+="/bin/chgrp video /sys/class/backlight/%k/brightness"
ACTION=="add", SUBSYSTEM=="backlight", KERNEL=="acpi_video0", RUN+="/bin/chmod g+w /sys/class/backlight/%k/brightness"

Kernel command-line options

Sometimes, ACPI does not work well due to different motherboard implementations and ACPI quirks, resulting in, for instance, inaccurate brightness notifications. This includes some laptops with dual graphics (e.g. Nvidia/Radeon dedicated GPU with Intel/AMD integrated GPU). Additionally, ACPI sometimes needs to register its own acpi_video0 backlight even if one already exists (such as intel_backlight), which can be done by adding one of the following kernel parameters:


If you find that changing the acpi_video0 backlight does not actually change the brightness, you may need to use acpi_backlight=none.

  • On Nvidia Optimus laptops, the kernel parameter nomodeset can interfere with the ability to adjust the backlight.
  • On an Asus notebooks you might also need to load the asus-nb-wmi kernel module.
  • Disabling legacy boot on Dell XPS13 breaks backlight support.

Udev rule

If the ACPI interface is available, the backlight level can be set at boot using a udev rule:

# Set backlight level to 8
SUBSYSTEM=="backlight", ACTION=="add", KERNEL=="acpi_video0", ATTR{brightness}="8"
Note: The systemd-backlight service restores the previous backlight brightness level at boot. To prevent conflicts for the above rules, see #systemd-backlight service.
Tip: To set the backlight depending on power state, see Power management#Using a script and an udev rule and use your favourite backlight utility in the script.

Switching off the backlight

Switching off the backlight (for example when one locks the notebook) can be useful to conserve battery energy. Ideally the following command inside of a graphical session should work:

$ sleep 1 && xset dpms force off

The backlight should switch on again on mouse movement or keyboard input. If the previous command does not work, there is a chance that vbetool works. Note, however, that in this case the backlight must be manually activated again. The command is as follows:

$ vbetool dpms off

To activate the backlight again:

$ vbetool dpms on

For example, this can be put to use when closing the notebook lid using Acpid.

systemd-backlight service

The systemd package includes the service systemd-backlight@.service, which is enabled by default and "static". It saves the backlight brightness level at shutdown and restores it at boot. The service uses the ACPI method described in #ACPI, generating services for each folder found in /sys/class/backlight/. For example, if there is a folder named acpi_video0, it generates a service called systemd-backlight@backlight:acpi_video0.service. When using other methods of setting the backlight at boot, it is recommended to mask the service systemd-backlight@.service.

Some laptops have multiple video cards (e.g. Optimus) and the backlight restoration fails. Try masking an instance of the service, e.g. systemd-backlight@backlight\:acpi_video1 for acpi_video1.

Tango-edit-clear.pngThis article or section needs language, wiki syntax or style improvements. See Help:Style for reference.Tango-edit-clear.png

Reason: Poor wording, needs to be merged with the previous paragraphs. (Discuss in Talk:Backlight#)

From the systemd-backlight@.service man page:

systemd-backlight understands the following kernel command line parameter:


Takes a boolean argument. Defaults to "1".

If "0", does not restore the backlight settings on boot. However, settings will still be stored on shutdown.

Backlight utilities

  • acpilight — "xbacklight" compatible utility that uses the sys filesystem to set the display brightness. Since it doesn't use X at all, it can also be used on the console and Wayland and has no problems with KMS drivers. Furthermore, on ThinkPad laptops, the keyboard backlight can also be controlled.
https://gitlab.com/wavexx/acpilight/ || acpilightAUR
  • brightd — Macbook-inspired brightd automatically dims (but does not put to standby) the screen when there is no user input for some time. A good companion of Display Power Management Signaling so that the screen does not blank out in a sudden.
http://www.pberndt.com/Programme/Linux/brightd/ || brightdAUR
  • brillo — Fork of light. Minimal, self contained program to control brightness and keyboard controllers. Allows unprivileged access using udev rules or PolicyKit.
https://gitlab.com/cameronnemo/brillo || brilloAUR
  • brightnessctl — Lightweight brightness control tool (Wayland compatible). Note that brightnessctl is a setuid binary, which might be considered a security risk by some.
https://github.com/Hummer12007/brightnessctl || brightnessctlAUR
  • Calise — Calculates ambient brightness and sets screen’s correct backlight using a camera.
http://calise.sourceforge.net/ || caliseAUR
  • Clight — User daemon utility that aims to fully manage your display. It will automagically change screen backlight level to match ambient brightness, as computed by capturing frames from webcam, even on external monitors. Moreover, it can manage your screen temperature, just like redshift does. Finally, it can dim your screen after a timeout.
https://github.com/FedeDP/Clight || clight-gitAUR
  • enlighten — Very small C utility to control the backlight brightness in Linux.
https://github.com/HalosGhost/enlighten || enlighten-gitAUR
  • illum — Backlight manager, which changes the screen backlight level based on keypresses (brightness up and brightness down). Written for newer BIOS/UEFI that does not automatically handle those buttons. This is an alternate to handling those buttons via acpi handlers or via x11/wm hotkeys.
https://github.com/jmesmon/illum || illum-gitAUR
  • Light — Program to control lights, leds and backlights. Works reliably by directly accessing sysfs, and not depending on X. Provides many features, such as saving/restoring brightness, limiting minimum brightness, etc. Designed to be bound to hotkeys or integrated into other applications.
https://haikarainen.github.io/light/ || lightAUR, light-gitAUR
  • Lux — Shell script to easily control brightness on backlight-controllers.
https://github.com/Ventto/lux || luxAUR
  • relight — The package provides relight.service, a systemd service to automatically restore previous backlight settings during reboot along using the ACPI method explained above, and relight-menu, a dialog-based menu for selecting and configuring backlights for different screens.
http://xyne.archlinux.ca/projects/relight || relightAUR
  • xbacklight — RandR-based backlight control application.
https://xorg.freedesktop.org/ || xorg-xbacklight


Brightness can be set using the xorg-xbacklight package.

  • xbacklight only works with Intel. Radeon does not support the RandR backlight property.
  • xbacklight currently does not work with the modesetting driver [1].

To set brightness to 50% of maximum:

$ xbacklight -set 50

Increments can be used instead of absolute values, for example to increase or decrease brightness by 10%:

$ xbacklight -inc 10
$ xbacklight -dec 10

Gamma can be set using either the xorg-xrandr or xorg-xgamma package. The following commands create the same effect:

$ xrandr --output LVDS1 --gamma 1.0:1.0:1.0
$ xgamma -rgamma 1 -ggamma 1 -bgamma 1
Tip: These commands can be bound to keyboard keys as described in Keyboard shortcuts#Xorg.

If you get the "No outputs have backlight property" error, it is because xrandr/xbacklight does not choose the right directory in /sys/class/backlight. You can specify the directory by setting the Backlight option of the device section in /etc/X11/xorg.conf.d/20-video.conf. For instance, if the name of the directory is intel_backlight and using the Intel driver, the device section may be configured as follows:

Section "Device"
    Identifier  "Intel Graphics" 
    Driver      "intel"
    Option      "Backlight"  "intel_backlight"

See FS#27677 and https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=651741 for details.


It is possible to set the register of the graphic card to adjust the backlight. It means you adjust the backlight by manipulating the hardware directly, which can be risky and generally is not a good idea. Not all of the graphic cards support this method.

When using this method, you need to use lspci first to find out where your graphic card is.

# setpci -s 00:02.0 F4.B=0

Using DBus with Gnome

Brightness can also be adjusted as the gnome controls do. Changes are reflected in the gnome UI using this method.

gdbus call --session --dest org.gnome.SettingsDaemon.Power --object-path /org/gnome/SettingsDaemon/Power --method org.freedesktop.DBus.Properties.Set org.gnome.SettingsDaemon.Power.Screen Brightness "<int32 50>"

Steps in brightness for keyboard contol can be implemented with this method as well.

gdbus call --session --dest org.gnome.SettingsDaemon.Power --object-path /org/gnome/SettingsDaemon/Power --method org.gnome.SettingsDaemon.Power.Screen.StepUp
gdbus call --session --dest org.gnome.SettingsDaemon.Power --object-path /org/gnome/SettingsDaemon/Power --method org.gnome.SettingsDaemon.Power.Screen.StepDown

Color correction

  • Clight — User daemon utility that aims to fully manage your display. It can manage the screen temperature depending on the current time of the day, just like redshift does. It tries to use geoclue2 to retrieve the user position if neither latitude or longitude are set in the configuration file. It also supports fixed times for sunrise and sunset.
https://github.com/FedeDP/Clight || clight-gitAUR
  • Monica — Monitor calibration tool. It works as frontend to xgamma to alter the gamma correction.
https://web.archive.org/web/20090815224839/http://www.pcbypaul.com/software/monica.html || monica
  • Redshift — Color temperature adjustment tool. It adjusts the color temperature of your screen according to your surroundings. This may help your eyes hurt less if you are working in front of the screen at night. This program is inspired by f.lux.
http://jonls.dk/redshift/ || redshift
  • xcalib — Lightweight monitor calibration loader which can load an ICC monitor profile to be shared across desktop applications.
https://github.com/OpenICC/xcalib || xcalibAUR
  • xgamma — Alter a monitor's gamma correction.
https://xorg.freedesktop.org/ || xorg-xgamma


Note: xcalib does not change the backlight power, it just modifies the video LUT table: this means that your battery life will be unaffected by the change. Nevertheless, it could be useful when no backlight control is available (Desktop PCs). Use xcalib -clear to reset the LUT.

The package xcalibAUR (upstream URL) is available in the AUR and can be used to dim the screen. A demonstration video is available on YouTube. This program can correct gamma, invert colors, and reduce contrast, the latter of which we use in this case. For example, to dim down:

$ xcalib -co 40 -a

This program uses ICC technology to interact with X11 and while the screen is dimmed, you may find that the mouse cursor is just as bright as before.

NVIDIA settings

Users of NVIDIA's proprietary drivers users can change display brightness via the nvidia-settings utility under "X Server Color Correction." However, note that this has absolutely nothing to do with backlight (intensity), it merely adjusts the color output. (Reducing brightness this way is a power-inefficient last resort when all other options fail; increasing brightness spoils your color output completely, in a way similar to overexposed photos.)

Increase brightness above maximum level

You can use xrandr to increase brightness above its maximum level:

$ xrandr --output output_name --brightness 2

This will set the brightness level to 200%. It will cause higher power usage and sacrifice color quality for brightness, nevertheless it is particularly suited for situations where the ambient light is very bright (e.g. sunlight).

External monitors

DDC/CI (Display Data Channel Command Interface) can be used to communicate with external monitors implementing MCCS (Monitor Control Command Set) over I2C. DDC can control brightness, contrast, inputs, etc on supported monitors. Settings available via the OSD (On-Screen Display) panel can usually also be managed via DDC.

ddcutil can be used to query and set brightness settings:

# ddcutil capabilities | grep Brightness
  Feature: 10 (Brightness)
# ddcutil getvcp 10
VCP code 0x10 (Brightness                    ): current value =    60, max value =   100
# ddcutil setvcp 10 70


Backlight PWM modulation frequency (Intel i915 only)

Laptops with LED backlight are known to have screen flicker sometimes. This is because the most efficient way of controlling LED backlight brightness is by turning the LED's on and off very quickly varying the amount of time they are on.

However, the frequency of the switching, so-called PWM (pulse-width modulation) frequency, may not be high enough for the eye to perceive it as a single brightness and instead see flickering. This causes some people to have symptoms such as headaches and eyestrain.

If you have an Intel i915 GPU, then it may be possible to adjust PWM frequency to eliminate flicker.

Period of PWM (inverse to frequency) is stored in 2 higher bytes of 0xC8254 register (if you are using the Intel GM45 chipset use address 0x61254 instead). To manipulate registers values install intel-gpu-tools from the official repositories.

To increase the frequency, period must be reduced. For example:

# intel_reg read 0xC8254
0xC8254 : 0x12281228

Then to double PWM frequency divide 2 higher bytes (4 higher hex digits) by 2 and write back resulting value, keeping lower bytes unchanged:

# intel_reg write 0xC8254 0x09141228

You can use online calculator to calculate desired value http://devbraindom.blogspot.com/2013/03/eliminate-led-screen-flicker-with-intel.html

To set new frequency automatically, consider writing an udev rule or install intelpwm-udevAUR.

Inverted Brightness (Intel i915 only)


  • after installing xf86-video-intel systemd-backlight.service turns off the backlight during boot
    • possible solution: mask systemd-backlight.service
  • switching from X to another VT turns the backlight off
  • the brightness keys are inverted (i.e. turning up the brightness makes the screen darker)

This problem may be solved by adding i915.invert_brightness=1 to the list of kernel parameters.

Unable to control eDP Panel brightness (Intel i915 only)

Embedded Display Port (eDP) v1.2 introduced a new display panel control protocol for backlight and other controls that works through the AUX channel.[2]

By default the i915 driver tries to use PWM to control backlight brightness, which might not work.

To set the backlight through writes to DPCD registers using the AUX channel set i915.enable_dpcd_backlight as kernel parameter or set in /etc/modprobe/i915.conf:

options i915 enable_dpcd_backlight

sysfs modified but no brightness change

Note: This behavior and their workarounds have been confirmed on the Dell M6700 with Nvidia K5000m (BIOS version prior to A10) and Clevo P750ZM (Eurocom P5 Pro Extreme) with Nvidia 980m.

On some systems, the brightness hotkeys on your keyboard correctly modify the values of the acpi interface in /sys/class/backlight/acpi_video0/actual_brightness but the brightness of the screen is not changed. Brightness applets from desktop environments may also show changes to no effect.

If you have tested the recommended kernel parameters and only xbacklight works, then you may be facing an incompatibility between your BIOS and kernel driver.

In this case the only solution is to wait for a fix either from the BIOS or GPU driver manufacturer.

A workaround is to use the inotify kernel api to trigger xbacklight each time the value of /sys/class/backlight/acpi_video0/actual_brightness changes.

First install inotify-tools. Then create a script around inotify that will be launched upon each boot or through autostart.



luminance() {
    read -r level < "$path"/actual_brightness
    factor=$((100 / max))
    printf '%d\n' "$((level * factor))"

read -r max < "$path"/max_brightness

xbacklight -set "$(luminance)"

inotifywait -me modify --format '' "$path"/actual_brightness | while read; do
    xbacklight -set "$(luminance)"