Difference between revisions of "Hdup"
|Line 1:||Line 1:|
Revision as of 12:02, 18 October 2009
This wiki page contains a guide on how to set up hdup, "The little, spiffy, backup tool". (Don't be discouraged by the fact that on its website it says "Unmaintained!". It's mature program, and that warning means only that its author, Miek Gieben, develops and uses a similar program (rdup), which is a bit more difficult to use.) Although it's a command line program, it's easy to set up, so don't be afraid.
- archives are tar.bz2 (or tar.gz)
- incremental backups (monthly-weekly-daily scheme)
- backups over ssh
- encrypted backups (mcrypt, gpg)
Other backup programs
See the general wiki article about backup programs.
Installing and setting hdup up
- hdup is in [extra] repo, so you can install it via pacman:
pacman -S hdup
- We need to edit the configuration file /etc/hdup/hdup.conf. There's one supplied, so you can just edit that one; or you can use the minimal one listed here:
[global] # to which dir the archives will be written archive dir = /vol/backup # chown the archives to this user user = <yourusername> [my-comp] # what to backup, separate with ,. # For directories add closing slash, like /home/ dir = /home/,/var/abs/local/ # don't include theses directories exclude = lost\+found/, /proc/, /dev/, /sys/
- You need to modify at least the following options:
- archive dir: that's where the backups will be written to
- user: created archives will be chowned to this user; you can just use your username. This is needed since hdup needs to be run as root.
- dir: that's the list of directories whose contents you want to back up).
The rest of the comments about the config file can be skipped on the first reading. They describe various other options you can use if the hdup.conf file:
- You can have more than one profile (the one used above is named my-comp). This means that you can have a couple of independent backup schemes. For instance, you might want to have another one for your webpages:
[my-webpages] dir = /var/www/
- To have a simple means of excluding some directories, use the nobackup option. It specifies the filename, which if it exists in a directory, then that directory is excluded from backing up.
nobackup = .nobackup
This can be used for example to exclude backing up of opera cache, by creating and empty .nobackup file in the cache directory:
- You can specify the compression algorithm used:
compression = bzip compression level = 6
- hdup refuses to restore backups to / by default, since it can be dangerous. To override this, use
# allow restoring to / force = yes
Let's first explain the monthly-weekly-daily scheme of backups. The 'monthly' archives contain all the data you specify to backup. The 'weekly' archives contain only those files, which have changed from the last 'monthly' backup. Finally, 'daily' contain only those which have changed from the last 'weekly' backup.
Of course, 'monthly', 'weekly' and 'daily' are just names, you don't need to perform backups in these intervals. But you cannot perform a 'weekly', unless you have at least one 'monthly', etc.
So, how does hdup implement this scheme?
As root, you can run hdup with the command like
hdup monthly my-comp
This creates a directory 'my-comp' in the directory you specified in the config file (/vol/backup), and inside it two other directories: 'etc' and (current date) '2008-02-23'. The 'etc' one contains some hdup's files, and the '2008-02-23' one will have a big .tar.bz2 archive in it. That's your backup.
After some time after 'monthly' backup, you decide you want to backup again. Now you can run hdup as
hdup weekly my-comp
and hdup will archive only what has changed from the 'monthly', and the archive will be put into another dir named after current date in /vol/backup/my-comp.
It should be clear now how the backing up works. Note that if hdup cannot find a 'monthly' and you ask it to do a 'weekly', it will complain. See the tips section.
To restore, you need to have all 'parent' archives (ie. if you want to restore a weekly backup, you also need to have its 'monthly' available). The command for restoring is
hdup restore my-comp 2008-01-31 /somedir
With this, hdup will try to restore things as they've been up to the date specified, and it will unpack to the directory /somedir. You can force it to unpack right away to / (see 'force' option above), but be very careful with this!
Note that the backups are just .tar.bz2 archives, so if you need a particular file from a particular date, just use any archive manager (or tar and bzip2) to open the archive and copy the needed file over.
More goodies: encryption and ssh
If you've got here, let me remind you that man hdup and man hdup.conf are your friends!
- For gpg encryption, you want to add something like
algorithm = gpg key = <your gpg key identifier>
either to [global] (then it's going to be used for all profiles), or just to a profile part. The archives will then be encrypted with your public key (so you can only decrypt them with your secret key). Note that you can decrypt them manually with
gpg -d <archive file>
in case you need it.
- For other encryption (e.g. mcrypt), just add
algorithm = mcrypt
In this case, hdup will ask for a password both when archiving and restoring.
Backing up over SSH
To backup your local machine (say, laptop) to remote machine (your server) you need to install hdup to both machines.
On the remote machine you need to have following settings in [global]
archive dir = /backup/path/on/remote allow remote = yes
And make a same host entry to the remote hdup.conf than you have in the local hdup.conf.
So if you have
[my-comp] dir = /home/ exclude = lost\+found ...
Add to the remote hdup.conf
Nothing else is needed, just the [host] entry
Now you can backup your laptop to your server using following command
hdup monthly my-comp @email@example.com
- You can of course burn the archives to cd/dvd with any burning software you like. The only thing to remember here is that the 'parent' archive is needed when you're doing a 'child' backup (like you need 'monthly' for 'weekly'). However, if you're tight on space, this can be achieved by mounting the cd/dvd with 'parent' backup, and soft linking its directory into /vol/backup, so that hdup can find it there.
On Debian Etch, I had to add the -P option when running hdup. This solved the following error:
/bin/tar: /opt/backup/debian/etc/filelist: file name read contains null