From ArchWiki
Revision as of 02:47, 16 April 2013 by Det (Talk | contribs) (Functions)

Jump to: navigation, search

zh-CN:Bash Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary end Bash (Bourne-again Shell) is a shell/programming language by the GNU Project. Its name is a homaging reference to its predecessor: the long-deprecated Bourne shell. Bash can be run on most UNIX-like operating systems, including GNU/Linux.


Bash behaviour can be altered depending on how it is invoked. Some descriptions of different modes follow.

Login shell

If Bash is spawned by login in a tty, by an SSH daemon, or similar means, it is considered a login shell. This mode can also be engaged using the -l or --login command line options.

Interactive shell

Bash is considered an interactive shell if it is started neither with the -c option nor any non-option arguments, and whose standard input and error are connected to terminals.

POSIX compliance

Bash can be run with enhanced POSIX compliance by starting Bash with the --posix command-line option or executing ‘set -o posix’ while Bash is running.

Legacy mode

In Arch /bin/sh (which used to be the Bourne shell executable) is symlinked to /bin/bash.

If Bash is invoked with the name sh, it tries to mimic the startup behavior of historical versions of sh.


The following files can be used to configure bash:

  • /etc/profile
  • ~/.bash_profile
  • ~/.bash_login
  • ~/.profile
  • /etc/bash.bashrc (Non-standard: only some distros, Arch included)
  • ~/.bashrc
  • ~/.bash_logout

These files are commonly used:

  • /etc/profile is sourced by all Bourne-compatible shells upon login. It sets up an environment upon login and loads application-specific (/etc/profile.d/*.sh) settings.
  • ~/.profile is read and sourced by bash when an interactive login shell is started.
  • ~/.bashrc is read and sourced by bash when a non-login interactive shell is started, for example, when you open a virtual console from the desktop environment. This file is useful for setting up a user-specific shell environment.

Configuration file sourcing order at startup

These files are sourced by bash in different circumstances.

  • if interactive + login shell → /etc/profile then the first readable of ~/.bash_profile, ~/.bash_login, and ~/.profile
    • Bash will source ~/.bash_logout upon exit.
  • if interactive + non-login shell → /etc/bash.bashrc then ~/.bashrc
  • if login shell + legacy mode → /etc/profile then ~/.profile

And by default in Arch:

  • /etc/profile (indirectly) sources /etc/bash.bashrc
  • /etc/skel/.bash_profile which users are encouraged to copy to ~/.bash_profile, sources ~/.bashrc

which means that /etc/bash.bashrc and ~/.bashrc will be executed for all interactive shells, whether they are login shells or not.

Shell and environment variables

The behavior of bash and programs run by it can be influenced by a number of environment variable. Environment variables are used to store useful values such as command search directories, or which browser to use. When a new shell or script is launched it inherits its parent's variables, thus starting with an internal set of shell variables[1].

These shell variables in bash can be exported in order to become environment variables:


or with a shortcut

export VARIABLE=content

Environment variables are conventionally placed in ~/.profile or /etc/profile so that all bourne-compatible shells can use them.

See Environment Variables for more general information.

Command line

Bash command line is managed by the separate library called Readline. Readline provides a lot of shortcuts for interacting with the command line i.e. moving back and forth on the word basis, deleting words etc. It is also Readline's responsibility to manage history of input commands. Last, but not least, it allows you to create macros.


alias is a command, which enables a replacement of a word with another string. It is often used for abbreviating a system command, or for adding default arguments to a regularly used command.

Personal aliases are preferably stored in ~/.bashrc, and system-wide aliases (which affect all users) belong in /etc/bash.bashrc.

An example excerpt from ~/.bashrc covering several time-saving aliases:

# modified commands
alias diff='colordiff'              # requires colordiff package
alias grep='grep --color=auto'
alias more='less'
alias df='df -h'
alias du='du -c -h'
alias mkdir='mkdir -p -v'
alias nano='nano -w'
alias ping='ping -c 5'
alias ..='cd ..'

# new commands
alias da='date "+%A, %B %d, %Y [%T]"'
alias du1='du --max-depth=1'
alias hist='history | grep'      # requires an argument
alias openports='ss --all --numeric --processes --ipv4 --ipv6'
alias pg='ps -Af | grep $1'         # requires an argument (note: /usr/bin/pg is installed by the util-linux package; maybe a different alias name should be used)

# privileged access
if [ $UID -ne 0 ]; then
    alias sudo='sudo '
    alias scat='sudo cat'
    alias svim='sudo vim'
    alias root='sudo su'
    alias reboot='sudo reboot'
    alias halt='sudo halt'
    alias update='sudo pacman -Su'
    alias netcfg='sudo netcfg2'

# ls
alias ls='ls -hF --color=auto'
alias lr='ls -R'                    # recursive ls
alias ll='ls -l'
alias la='ll -A'
alias lx='ll -BX'                   # sort by extension
alias lz='ll -rS'                   # sort by size
alias lt='ll -rt'                   # sort by date
alias lm='la | more'

# safety features
alias cp='cp -i'
alias mv='mv -i'
alias rm='rm -I'                    # 'rm -i' prompts for every file
alias ln='ln -i'
alias chown='chown --preserve-root'
alias chmod='chmod --preserve-root'
alias chgrp='chgrp --preserve-root'

# pacman aliases (if necessary, replace 'pacman' with your favorite AUR helper and adapt the commands accordingly)
alias pac="sudo /usr/bin/pacman -S"		# default action	- install one or more packages
alias pacu="/usr/bin/pacman -Syu"		# '[u]pdate'		- upgrade all packages to their newest version
alias pacr="sudo /usr/bin/pacman -Rs"		# '[r]emove'		- uninstall one or more packages
alias pacs="/usr/bin/pacman -Ss"		# '[s]earch'		- search for a package using one or more keywords
alias paci="/usr/bin/pacman -Si"		# '[i]nfo'		- show information about a package
alias paclo="/usr/bin/pacman -Qdt"		# '[l]ist [o]rphans'	- list all packages which are orphaned
alias pacc="sudo /usr/bin/pacman -Scc"		# '[c]lean cache'	- delete all not currently installed package files
alias paclf="/usr/bin/pacman -Ql"		# '[l]ist [f]iles'	- list all files installed by a given package
alias pacexpl="/usr/bin/pacman -D --asexp"	# 'mark as [expl]icit'	- mark one or more packages as explicitly installed 
alias pacimpl="/usr/bin/pacman -D --asdep"	# 'mark as [impl]icit'	- mark one or more packages as non explicitly installed

# '[r]emove [o]rphans' - recursively remove ALL orphaned packages
alias pacro="/usr/bin/pacman -Qtdq > /dev/null && sudo /usr/bin/pacman -Rs \$(/usr/bin/pacman -Qtdq | sed -e ':a;N;$!ba;s/\n/ /g')"


Bash also supports functions. The following function will extract a wide range of compressed file types. Add the function to ~/.bashrc and use it with the syntax extract <file1> <file2> ...

extract() {
    local c e i

    (($#)) || return

    for i; do

        if [[ ! -r $i ]]; then
            echo "$0: file is unreadable: \`$i'" >&2

        case $i in
               c='bsdtar xvf';;
        *.7z)  c='7z x';;
        *.Z)   c='uncompress';;
        *.bz2) c='bunzip2';;
        *.exe) c='cabextract';;
        *.gz)  c='gunzip';;
        *.rar) c='unrar x';;
        *.xz)  c='unxz';;
        *.zip) c='unzip';;
        *)     echo "$0: unrecognized file extension: \`$i'" >&2

        command $c "$i"

    return $e
Note: Make sure extglob is enabled: shopt -s extglob, by adding it to the ~/.bashrc (see: It is enabled by default, if using Bash completion.

Another way to do this is to install the unpAUR package from the AUR which contains a Perl script.

Very often changing to a directory is followed by the ls command to list its contents. Therefore it is helpful to have a second function doing both at once. In this example we will name it cl and show an error message if the specified directory does not exist.

# cd and ls in one
cl() {
if [ -d "$1" ]; then
	cd "$1"
	echo "bash: cl: '$1': Directory not found"

Of course the ls command can be altered to fit your needs, for example $ ls -hall --color=auto.

More Bash function examples can be found in BBS#30155.

Tips and tricks

Prompt customization

The bash prompt is governed by the variable $PS1. To colorize the bash prompt, first comment out the default $PS1:

#PS1='[\u@\h \W]\$ '

Then add the following line:

PS1='\[\e[0;31m\]\u\[\e[m\] \[\e[1;34m\]\w\[\e[m\] \[\e[0;31m\]\$ \[\e[m\]\[\e[0;32m\] '

This $PS1 is useful for a root bash prompt, with red designation and green console text. For details on customizing your bash prompt, see Color Bash Prompt.

Tab completion

It is useful to have the tab complete feature (pressing Template:Keypress key twice on the keyboard) after you type some command like sudo.

To do this add a line in this format to your ~/.bashrc file:

complete -cf your_command

For example, to enable tab completion after sudo and man:

complete -cf sudo
complete -cf man

Advanced completion

Despite Bash's native support for basic file name, command, and variable tab completion, there are ways of improving and extending its reach.

The bash-completion package extends functionality by adding tab completion to a wide range of commands and their options. Enabling advanced bash completion is quite simple, just install the following package:

# pacman -S bash-completion

Start a new shell and it will be automatically enabled thanks to /etc/bash.bashrc.

Note: If you added any lines similar to "complete -cf sudo" as mentioned in the previous settings and have problems with bash-completion, try removing those lines.
Note: The normal expansions that you are used to like $ ls file.*<tab><tab> will not work unless you $ compopt -o bashdefault <prog> for all programs you want to fallback to the normal glob expansions. See and

Faster completion

By appending the following into the readline initialization file (~/.inputrc or /etc/inputrc by default):

set show-all-if-ambiguous on

it is no longer necessary to hit Template:Keypress twice to produce a list of all possible completions (both when a partial or no completion is possible). Alternatively, to produce such a list only when no completion is possible, append the following after the previous one:

set show-all-if-unmodified on

The "command not found" hook

The pkgfile package includes a "command not found" hook that will automatically search the official repositories when you enter an unrecognized command. Then it will display something like this:

chiri ~/docs $ abiword abiword may be found in the following packages: extra/abiword 2.8.6-7 usr/bin/abiword chiri ~/docs $ _

An alternative "command not found" hook is also provided by the AUR package command-not-found, which will generate an output like the following:

chiri ~/docs $ abiword

The command 'abiword' is been provided by the following packages: abiword (2.8.6-7) from extra [ abiword ] abiword (2.8.6-7) from staging [ abiword ] abiword (2.8.6-7) from testing [ abiword ]

chiri ~/docs $ _

Display return codes

You can set trap to intercept return code of last exited program. To show non-zero error code of last command you can add following lines to your ~/.bashrc:

EC() { echo -e '\e[1;33m'code $?'\e[m\n'; }
trap EC ERR

Disable Ctrl+z in terminal

You can disable Template:Keypress (pauses/closes your CLI application) feature for you CLI by wrapping your command in this script

trap "" 20


trap "" 20

With this example script, when you accidentally press Template:Keypress instead of Template:Keypress or some other key combination while playing Adom(game) your game will not end. Nothing will happen because Template:Keypress will be ignored.

Clear the screen after logging out

To clear the screen after logging out on a virtual terminal, append the following lines to ~/.bash_logout:


ASCII art, fortunes and cowsay

Along with colors, system info and ASCII symbols, Bash can be made to display a piece of ASCII art on login. ASCII images can be found online and pasted into a text file, or generated from scratch. To set the image to display in a terminal on login, place the string

cat /path/to/text/file

at the top of ~/.bashrc.

Random poignant, inspirational, silly or snide phrases can also be shown. To see an example, install the fortune-mod package from the extra repository.

(user@host)-(10:10 AM Wed Dec 22)
--(~)--->  fortune

It is Texas law that when two trains meet each other at a railroad crossing, each shall come to a full stop, and neither shall proceed until the other has gone.

To have a random phrase displayed when logging into a terminal, just set

command fortune

as the top line in ~/.bashrc.

Note: By default, fortune displays quotes and phrases that are rather inoccuous. However, the package does contain a set of comments some will find offensive, located in /usr/share/fortune/off. See the man page for more info on these.

These two features can be combined, using the program cowsay. Modify the line at the top of ~/.bashrc to read

command cowsay $(fortune)


command cowthink $(fortune)

The earth is like a tiny grain of sand, 
only much, much heavier.                
       \   ^__^
        \  (oo)\_______
           (__)\       )\/\
               ||----w |
               ||     ||

The ASCII images are generated by .cow text files located in /usr/share/cows, and all themes can be listed with the command cowsay -l These files can be edited to the user's liking; custom images can also be created from scratch or found on the net. The easiest way create a custom cow file from an image found online would be to open an existing .cow file in a text editor, copy-and-paste the image from a browser and save the file as a different name. Test the custom file using

# cowsay -f cowfile $(fortune)

This can produce some nice eye candy, and the commands used can be more complex. For a specialized example, take a look here. Another example, to use a random cow, random facial expression, and nicely wrap the text of long fortunes:

fortune -a | fmt -80 -s | $(shuf -n 1 -e cowsay cowthink) -$(shuf -n 1 -e b d g p s t w y) -f $(shuf -n 1 -e $(cowsay -l | tail -n +2)) -n
( Fry: I must be a robot. Why else would )
( human women refuse to date me?         )
              ,'``.._   ,'``.
            (                 )@@@;:@@@@)@@@\  _,-.
             `.              (@@@//@@@@@@@@@@`'@@@@\
              :               `.//@@)@@@@@@)@@@@@,@;
              |`.            _,'/@@@@@@@)@@@@)@,'@,'
             ,'\ ``--....-)='    `._,@@\    )@@@'``._
            /@_@`.       (@)      /@@@@@)  ; / \ \`-.'
           (@@@`-:`.     `' ___..'@@_,-'   |/   `.)
            `-. `.`.``-----``--,@@.'
              |/`.\`'        ,',');
                  `         (/  (/
(user@host)-(10:10 AM Wed Dec 22)--(~))--->
Note: If you want a full colored cowsay-like art, the best option is ponysay, this show full colored ponies (more than 220 at version 1.1) in you terminal (inside X11 or in TTY you have full 256 colored ponies) runing 'ponysay "command or fortune command"', the complete list of ponies are showed usind 'ponysay -l'. Exist in AUR a tool for creating more ponies (or other stuff) called util-say-gitAUR, and these news archives need to be stored in $HOME/.local/share/ponysay/ponies and $HOME/.local/share/ponysay/ttyponies for desktop and TTY respectibely

ASCII Historical Calendar

To install calendar files in your ~/.calendar directory you will need the rpmextract package installed. Then from your home directory, run the following:

$ mkdir -p ~/.calendar
$ curl -o calendar.rpm
$ rpm2cpio calendar.rpm | bsdtar -C ~/.calendar --strip-components=4 -xf - ./usr/share/c*

This will then print out the calendar items

$ sed -n "/$(date +%m\\/%d\\\|%b\*\ %d)/p" $(find ~/.calendar /usr/share/calendar -maxdepth 1 -type f -name 'c*' 2>/dev/null);

Customise Title

The $PROMPT_COMMAND variable allows you to execute a command before the prompt. For example, this will change the title to your full current working directory:

export PROMPT_COMMAND='echo -ne "\033]0;$PWD\007"'

This will change your title to the last command run, and make sure your history file is always up-to-date:

export HISTCONTROL=ignoreboth
export HISTIGNORE='history*'
export PROMPT_COMMAND='history -a;echo -en "\e]2;";history 1|sed "s/^[ \t]*[0-9]\{1,\}  //g";echo -en "\e\\";'

Fix line wrap on window resize

When you resize your xterm in vi for example, Bash will not get the resize signal, and the text you type will not wrap correctly, overlapping the prompt.

Use the following in your /etc/bash.bashrc (from Debian) :

# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize

Bash history completion

Bash history completion bound to arrow keys (down, up):

# ~/.bashrc
bind '"\e[A": history-search-backward'
bind '"\e[B": history-search-forward'

or equivalently in ~/.inputrc:

# ~/.inputrc
"\e[A": history-search-backward
"\e[B": history-search-forward

More info at Readline#History and [2]

Auto "cd" when entering just a path

Bash can automatically prepend cd when entering just a path in the shell. For example,

$ /etc

normally returns this error:

bash: /etc: Is a directory

Enabling this feature will instead result in this:

[user@host ~] $ /etc
cd /etc
[user@host etc] $ pwd

To enable this feature, you need to enable the shell option for it. To enable this persistently, add this line to your ~/.bashrc file:

shopt -s autocd

See also