- 1 Post-Installation
- 1.1 Update
- 1.1.1 Configure the network (if necessary)
- 1.1.2 Update, Sync, and Upgrade the system with pacman
- 1.1.3 /etc/pacman.conf
- 1.1.4 /etc/pacman.d/mirrorlist
- 1.1.5 rankmirrors
- 1.1.6 Get familiar with pacman
- 1.1.7 Update the System
- 1.2 Adding a User
- 1.1 Update
Congratulations, and welcome to your new Arch Linux system!
This section will cover various must-do procedures after installation such as updating your new system and adding a regular, non-root user.
Your new Arch Linux base system is now a functional GNU/Linux environment ready for customization. From here, you may build this elegant set of tools into whatever you wish or require for your purposes.
Login with the root account. We will configure pacman and update the system as root.
Configure the network (if necessary)
If you properly configured your system, you should have a working network. Try to
ping example.com to verify:
$ ping -c 3 example.com
PING example.com (220.127.116.11) 56(84) bytes of data. 64 bytes from 43-10.any.icann.org (18.104.22.168): icmp_req=1 ttl=248 time=25.6 ms 64 bytes from 43-10.any.icann.org (22.214.171.124): icmp_req=2 ttl=248 time=22.9 ms 64 bytes from 43-10.any.icann.org (126.96.36.199): icmp_req=3 ttl=248 time=23.6 ms --- example.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2003ms rtt min/avg/max/mdev = 22.912/24.062/25.632/1.156 ms
If you have successfully established a network connection, continue with Update, Sync, and Upgrade the system with pacman.
If three attempts to ping example.com produce an "unknown host" error, then your network is not properly configured. Troubleshoot by checking the following files for integrity and proper settings:
/etc/rc.conf - Check your HOSTNAME and NETWORKING section for typos and errors.
/etc/hosts - Check for format errors and typos.
/etc/resolv.conf - Check this only if you are using a static IP. If you are using DHCP, this file will be dynamically created and destroyed by default.
Check your Ethernet with
$ ip addr
All interfaces will be listed. You should see an entry for eth0, or perhaps eth1. These examples will use eth0.
If required, you can set a new static IP with:
# ip addr add <ip>/<netmask> dev <interface>
and the default gateway with
# ip route add default via <ip>
/etc/resolv.conf contains your DNS server and add it if it is missing.
Check your network again with
ping -c 3 www.google.com. If everything is working now, adjust
/etc/rc.conf as described above for static IP.
If you have a DHCP server/router in your network try:
# dhcpcd eth0
If this is working, adjust
/etc/rc.conf as described above, for dynamic IP.
Please see Wireless Quickstart For the Live Environment for details on connecting to a wireless network. Although you are no longer running off the installation media, the commands are the same as long as you installed all related wireless packages during package selection. Remember, your wireless device may need firmware in order to operate. For troubleshooting, check the detailed Wireless Setup page.
If you are behind a proxy server, edit
/etc/wgetrc and set http_proxy and ftp_proxy in it.
Analog Modem, ISDN, and DSL (PPPoE)
See Internet Access for detailed instructions.
Update, Sync, and Upgrade the system with pacman
Now we will update the system using pacman. Pacman is the package manager of Arch Linux. It manages your entire package system and handles installation, removal, package downgrade (through cache), custom compiled package handling, automatic dependency resolution, remote and local searches and much more. Pacman will now be used to download software packages from remote repositories and install them onto your system.
To make any changes to your repository selections or pacman options, edit
Repositories are described below; enable all desired repositories by removing the # in front of the 'Include =' and '[repository]' lines.
A software repository is a storage location from which software packages may be retrieved and installed on a computer. Arch Linux package maintainers (developers and Trusted Users) maintain a number of official repositories containing software packages for essential and popular software, readily accessible via pacman. This article outlines those officially-supported repositories. See Official Repositories for more information including details about the purpose of each repository.
Most people will want to use [core], [extra] and [community]. If you want to run 32-bit applications on Arch x86_64, enable the [multilib] repository by adding the lines below to
[multilib] Include = /etc/pacman.d/mirrorlist
The Arch User Repository (AUR) holds the [community] and [unsupported] branches. Unlike the other branches, [unsupported] contains no binary packages and cannot (by design) be accessed directly by pacman. This branch is a collection PKGBUILD bash scripts written by Arch users to build packages from source using the Arch Build System. Software in [unsupported] is generally not available in the other branches. When an [unsupported] package acquires enough popular votes, it may be moved to the [community] binary repository if one of the Trusted Users is willing to adopt and maintain it there.
Defines pacman repository mirrors and priorities.
/etc/pacman.d/mirrorlistbefore you continue.
/etc/pacman.d/mirrorlist in an editor and uncomment (remove the '#' in front) a server close to you. Then issue a complete package refresh:
# pacman -Syy
-y flags forces pacman to refresh all package lists even if they are considered to be up to date. Issuing
pacman -Syy whenever a mirror is changed, is good practice and will avoid possible headaches.
Alternatively, you can use
rankmirrors is a bash script which will attempt to detect uncommented mirrors specified in
/etc/pacman.d/mirrorlist which are closest to the installation machine based on latency. Faster mirrors will dramatically improve pacman performance, and the overall Arch Linux experience. This script may be run periodically, especially if the chosen mirrors provide inconsistent throughput and/or updates. Note that
rankmirrors does not test for throughput. Tools such as
rsync may be used to effectively test for mirror throughput after a new
/etc/pacman.d/mirrorlist has been generated.
Issue the following command to completely refresh package database, upgrade and install
# pacman -Syyu curl
- If you get an error at this step, use the command
nano /etc/pacman.d/mirrorlistand uncomment a server that suits you.
cd to the
# cd /etc/pacman.d
Backup the existing
# cp mirrorlist mirrorlist.backup
Edit mirrorlist.backup and uncomment all mirrors on the same continent or within geographical proximity to test with rankmirrors.
# nano mirrorlist.backup
Run the script against the mirrorlist.backup with the -n switch and redirect output to a new /etc/pacman.d/mirrorlist file:
# rankmirrors -n 6 mirrorlist.backup > mirrorlist
Force pacman to refresh all package lists with the new mirrorlist in place:
# pacman -Syy
Mirrorcheck for up-to-date packages
rankmirrors does not take into account how up-to-date a mirror's package list is, it is important to note that one or more of the mirrors it selects as fastest may still be out-of-date. Arch Linux MirrorStatus reports various aspects about the mirrors such as network problems with mirrors, data collection problems, the last time mirrors have been synced, etc. One may wish to manually inspect
/etc/pacman.d/mirrorlist, ensuring that the file contains only up-to-date mirrors if having the latest package versions is a priority.
Alternatively, the Mirrorlist Generator can automatically rank mirrors close to your location by how up-to-date they are.
mirrorlistfile from the Pacman Mirrorlist Generator, see Mirrors.
Get familiar with pacman
pacman is the Arch user's best friend. It is highly recommended to study and learn how to use the pacman(8) tool. Try:
$ man pacman
$MANWIDTHenvironment variable and create a
.profilefile in your root's home folder for subsequent logins:
# export MANWIDTH=80
Update the System
Before upgrading the system, read through the news (and optionally the announce mailing list). Often the developers will provide important information about required configurations and modifications for known issues. The Arch Linux user is expected to consult these pages before performing an upgrade.
Sync, refresh, and upgrade your entire new system with:
# pacman -Syu
# pacman --sync --refresh --sysupgrade
Pacman will now download a fresh copy of the master package list from the server(s) defined in
/etc/pacman.conf and perform all available upgrades. You may be prompted to upgrade pacman itself at this point. If so, respond by entering yes, and then reissue the
pacman -Syu command when finished.
Reboot if a kernel upgrade has occurred.
Pacman output is saved in
See Package Management FAQ for answers to frequently asked questions regarding updating and managing your packages.
After executing the command
pacman -Syu, the entire system will be updated. It is possible to prevent a package from being upgraded. A typical scenario would be a package for which an upgrade may prove problematic for the system. In this case, there are two options; indicate the package(s) to skip in the pacman command line using the --ignore switch (
pacman -S --help for details) or permanently indicate the package(s) to skip in the
/etc/pacman.conf file in the IgnorePkg array. For more information, please see the pacman wiki entry.
Please note that the power user is expected to keep the system up to date with pacman -Syu, rather than selectively upgrading packages. You may diverge from this typical usage as you wish; just be warned that there is a greater chance that things will not work as intended and that it could break your system. The majority of complaints happen when selective upgrading, unusual compilation or improper software installation is performed. Use of IgnorePkg in
/etc/pacman.conf is therefore discouraged, and should only be used sparingly, if you know what you are doing.
The Arch rolling release model
Keep in mind that Arch is a rolling release distribution. This means the user is not required to reinstall or perform elaborate system rebuilds to upgrade to the newest version. Issuing
pacman -Syu periodically (and noting the above warning) keeps the entire system up-to-date and on the bleeding edge. At the end of this upgrade, the system will be completely current. Remember to reboot if a kernel upgrade has occurred.
Adding a User
Linux is a multi-user environment. You should not perform everyday tasks using the root account, it is very poor practice and extremely dangerous: the root account should be used for administrative tasks only. Add a normal user account instead, using one of the two following methods, both creating the user archie as an example:
You will be asked to enter some information in an interactive way:
Login name for new user : archie User ID ('UID') [ defaults to next available ]: Initial group [ users ]: Additional groups (comma separated) : audio,lp,optical,storage,video,wheel,games,power,scanner Home directory [ /home/archie ]: Shell [ /bin/bash ]: Expiry date (YYYY-MM-DD) :
As shown in the example, you are advised to enter values only for the Login name and the Additional groups, and leave empty all the other fields.
The list of Additional groups in the example is a typical choice for a desktop system, hence it is recommended especially for beginners:
- audio - for tasks involving sound card and related software
- lp - for managing printing tasks
- optical - for managing tasks pertaining to the optical drive(s)
- storage - for managing storage devices
- video - for video tasks and hardware acceleration
- wheel - for using sudo
- games - needed for write permission for games in the games group
- power - used with power options (e.g. shutdown with power button)
- scanner - for using a scanner
Now you will be presented with a preview of your new account, and the ability to cancel or continue operations: after pressing Template:Keypress the account will be created, and you will be prompted to enter additional, optional information for the new user (e.g. the full name). After that, you will be asked to enter the password for your account.
# useradd -m -g users -G audio,lp,optical,storage,video,wheel,games,power,scanner -s /bin/bash archie
You will have to set a password using
passwd. To enter additional information you can use the
Deleting the user account
In the event of error, or if you wish to delete this user account in favor of a different name or for any other reason, use
# userdel -r [username]
-r option will remove the user's home directory and its content, along with the the user's mail spool.
Read Users and Groups for further information. If you want to change the name of your user or any existing user, consult the Change username page. You may also check the man pages for
gpasswd(8).Template:Beginners' Guide navigation