Difference between revisions of "Bluetooth"

From ArchWiki
Jump to: navigation, search
(Bluetoothctl)
(use proper drop-in snippets)
 
(97 intermediate revisions by 38 users not shown)
Line 7: Line 7:
 
[[ja:Bluetooth]]
 
[[ja:Bluetooth]]
 
[[ru:Bluetooth]]
 
[[ru:Bluetooth]]
[[zh-CN:Bluetooth]]
+
[[zh-hans:Bluetooth]]
 
{{Related articles start}}
 
{{Related articles start}}
{{Related|Bluez4}}
 
 
{{Related|Bluetooth mouse}}
 
{{Related|Bluetooth mouse}}
 +
{{Related|Bluetooth keyboard}}
 
{{Related|Bluetooth headset}}
 
{{Related|Bluetooth headset}}
 
{{Related|Blueman}}
 
{{Related|Blueman}}
 +
{{Related|ObexFTP}}
 
{{Related articles end}}
 
{{Related articles end}}
[http://www.bluetooth.org/ Bluetooth] is a standard for the short-range wireless interconnection of cellular phones, computers, and other electronic devices. In Linux, the canonical implementation of the Bluetooth protocol stack is [http://www.bluez.org/ BlueZ].
+
[[Wikipedia:Bluetooth|Bluetooth]] is a standard for the short-range wireless interconnection of cellular phones, computers, and other electronic devices. In Linux, the canonical implementation of the Bluetooth protocol stack is [http://www.bluez.org/ BlueZ].
  
 
== Installation ==
 
== Installation ==
  
[[Install]] the {{Pkg|bluez}} and {{Pkg|bluez-utils}} packages. The {{Pkg|bluez}} package provides the Bluetooth protocol stack, and the {{Pkg|bluez-utils}} package provides the {{ic|bluetoothctl}} utility.  
+
# [[Install]] the {{Pkg|bluez}} package, providing the Bluetooth protocol stack.
 +
# [[Install]] the {{Pkg|bluez-utils}} package, providing the {{ic|bluetoothctl}} utility. Alternatively install {{AUR|bluez-utils-compat}} to additionally have the [[#Deprecated BlueZ tools|deprecated BlueZ tools]].
 +
# The generic Bluetooth driver is the {{ic|btusb}} Kernel module. [[Kernel_module#Obtaining_information|Check]] whether that module is loaded. If it's not, then [[Kernel_module#Manual_module_handling|load the module]].
 +
# [[Start/enable]] {{ic|bluetooth.service}}.
  
Load the generic bluetooth driver, if not already loaded:
+
{{Note|
# modprobe btusb
+
* By default the bluetooth daemon will only give out bnep0 devices to users that are a member of the {{ic|lp}} group. Make sure to add your user to that group if you intend to connect to a bluetooth tether. You can change the group that is required in the file {{ic|/etc/dbus-1/system.d/bluetooth.conf}}.
 +
* Some Bluetooth adapters are bundled with a Wi-Fi card (e.g. [http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6235.html Intel Centrino]). These require that the Wi-Fi card is firstly enabled (typically a keyboard shortcut on a laptop) in order to make the Bluetooth adapter visible to the kernel.
 +
* Some Bluetooth cards (e.g. Broadcom) conflict with the network adapter. Thus, you need to make sure that your Bluetooth device get connected before the network service boot.
 +
* Some tools such as hcitool and hciconfig have been deprecated upstream, and are no longer included in {{Pkg|bluez-utils}}. Since these tools will no longer be updated, it is recommended that scripts be updated to avoid using them. If you still desire to use them, install {{AUR|bluez-utils-compat}}. See {{Bug|53110}} and [https://www.spinics.net/lists/linux-bluetooth/msg69239.html the Bluez mailing list] for more information. }}
 +
 
 +
=== Front-ends ===
 +
 
 +
==== Console ====
 +
 
 +
* {{App|bluetoothctl|Pairing a device from the shell is one of the simplest and most reliable options.|http://www.bluez.org/|{{Pkg|bluez-utils}}}}
 +
 
 +
==== Graphical ====
 +
 
 +
The following packages allow for a graphical interface to customize Bluetooth.
 +
 
 +
* {{App|GNOME Bluetooth|[[GNOME]]'s Bluetooth tool.
 +
** {{Pkg|gnome-bluetooth}} provides the back-end
 +
** {{Pkg|gnome-shell}} provides the status monitor applet
 +
** {{Pkg|gnome-control-center}} provides the configuration front-end GUI that can be accessed by typing Bluetooth on the Activities overview, or with the {{ic|gnome-control-center bluetooth}} command.
 +
** You can also launch the {{ic|bluetooth-sendto}} command directly to send files to a remote device.
 +
** To receive files, open the Bluetooth settings panel; you can only receive whilst the Bluetooth panel is open.
 +
** To add a Bluetooth entry to the ''Send To'' menu in Thunar's file properties menu, see instructions [http://docs.xfce.org/xfce/thunar/send-to here]. (The command that needs to be configured is {{ic|bluetooth-sendto %F}}).
 +
|https://wiki.gnome.org/Projects/GnomeBluetooth|}}
 +
* {{App|Bluedevil|[[KDE]]'s Bluetooth tool. If there is no Bluetooth icon visible in Dolphin and in the system tray, enable it in the system tray options or add a widget. You can configure Bluedevil and detect Bluetooth devices by clicking the icon. An interface is also available from the KDE System Settings.|https://projects.kde.org/projects/kde/workspace/bluedevil|{{Pkg|bluedevil}}}}
 +
* {{App|Blueberry|Linux Mint's spin-off of GNOME Bluetooth, which works in all desktop environments. ''Blueberry'' doesn't support receiving files through Obex Object Push.|https://github.com/linuxmint/blueberry|{{Pkg|blueberry}}}}
 +
* {{App|[[Blueman]]|A full featured Bluetooth manager.|https://github.com/blueman-project/blueman|{{Pkg|blueman}}}}
 +
* {{App|[[ObexFTP]]|A tool for transferring files to/from any OBEX enabled device.|http://dev.zuckschwerdt.org/openobex/wiki/ObexFtp|{{AUR|obexftp}}}}
 +
 
 +
== Pairing ==
 +
 
 +
{{Expansion|Step 5 is unclear. What are Bluetooth agents?}}
 +
 
 +
{{Note|Before using the bluetooth device, make sure that it is not blocked by [[rfkill]].}}
  
Then [[start]] the {{ic|bluetooth.service}} systemd unit. You can [[enable]] it to start automatically at boot time.
+
This section describes directly configuring ''bluez5'' via the ''bluetoothctl'' CLI, which might not be necessary if you are using  an alternative front-end tool (such as GNOME Bluetooth).
  
{{Note|
+
The exact procedure depends on the devices involved and their input functionality.  What follows is a general outline of pairing a device using {{ic|bluetoothctl}}.
* By default the bluetooth daemon will only give out bnep0 devices to users that are a member of the {{ic|lp}} group. Make sure to add your user to that group if you intend to connect to a bluetooth tether. You can change the group that is required in the file {{ic|/etc/dbus-1/system.d/bluetooth.conf}}.
 
* Some Bluetooth adapters are bundled with a Wi-Fi card (e.g. [http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6235.html Intel Centrino]). These require that the Wi-Fi card is first enabled (typically a keyboard shortcut on a laptop) in order to make the Bluetooth adapter visible to the kernel.
 
* Some Bluetooth cards (e.g. Broadcom) conflict with the network adapter. Thus, you need to make sure that your Bluetooth device get connected before the network service boot.}}
 
  
== Configuration via the CLI ==
+
Start the {{ic|bluetoothctl}} interactive command. Input {{ic|help}} to get a list of available commands.
=== Bluetoothctl ===
 
Pairing a device from the shell is one of the simplest and most reliable options. The exact procedure depends on the devices involved and their input functionality.  What follows is a general outline of pairing a device using {{ic|/usr/bin/bluetoothctl}}:
 
  
Start the {{ic|bluetoothctl}} interactive command. There one can input {{ic|help}} to get a list of available commands.
+
# (optional) Select a default controller with {{ic|select ''MAC_address''}}.
* Turn the power to the controller on by entering {{ic|power on}}. It is off by default.
+
# Enter {{ic|power on}} to turn the power to the controller on. It is off by default and will turn off again each reboot, see [[#Auto power-on after boot]].
* Enter {{ic|devices}} to get the MAC Address of the device with which to pair.
+
# Enter {{ic|devices}} to get the MAC Address of the device with which to pair.
* Enter device discovery mode with {{ic|scan on}} command if device is not yet on the list.
+
# Enter device discovery mode with {{ic|scan on}} command if device is not yet on the list.
* Turn the agent on with {{ic|agent on}}.
+
# Turn the agent on with {{ic|agent on}} or choose a specific agent: if you press tab twice after {{ic|agent}} you should see a list of available agents, e.g. DisplayOnly KeyboardDisplay NoInputNoOutput DisplayYesNo KeyboardOnly off on.
* Enter {{ic|pair ''MAC Address''}} to do the pairing (tab completion works).
+
# Enter {{ic|pair ''MAC_address''}} to do the pairing (tab completion works).
* If using a device without a PIN, one may need to manually trust the device before it can reconnect successfully. Enter {{ic|trust ''MAC Address''}} to do so.
+
# If using a device without a PIN, one may need to manually trust the device before it can reconnect successfully. Enter {{ic|trust ''MAC_address''}} to do so.
* Finally, use {{ic|connect ''MAC_address''}} to establish a connection.
+
# Enter {{ic|connect ''MAC_address''}} to establish a connection.
  
 
An example session may look this way:
 
An example session may look this way:
 +
 
  # bluetoothctl  
 
  # bluetoothctl  
 
  [NEW] Controller 00:10:20:30:40:50 pi [default]
 
  [NEW] Controller 00:10:20:30:40:50 pi [default]
Line 50: Line 82:
 
  [bluetooth]# default-agent  
 
  [bluetooth]# default-agent  
 
  Default agent request successful
 
  Default agent request successful
 +
[bluetooth]# power on
 +
Changing power on succeeded
 +
[CHG] Controller 00:10:20:30:40:50 Powered: yes
 
  [bluetooth]# scan on
 
  [bluetooth]# scan on
 
  Discovery started
 
  Discovery started
Line 65: Line 100:
 
  Pairing successful
 
  Pairing successful
 
  [CHG] Device 00:12:34:56:78:90 Connected: no
 
  [CHG] Device 00:12:34:56:78:90 Connected: no
 +
[bluetooth]# connect 00:12:34:56:78:90
 +
Attempting to connect to 00:12:34:56:78:90
 +
[CHG] Device 00:12:34:56:78:90 Connected: yes
 +
Connection successful
  
In order to have the device active after a reboot, a udev rule is needed:
+
== Configuration ==
  
{{hc|/etc/udev/rules.d/10-local.rules|2=
+
=== Auto power-on after boot ===
# Set bluetooth power up
 
ACTION=="add", KERNEL=="hci0", RUN+="/usr/bin/hciconfig hci0 up"}}
 
  
or
+
By default, your Bluetooth adapter will not power on after a reboot. The former method by using {{ic|hciconfig hci0 up}} is deprecated, see the [http://www.bluez.org/release-of-bluez-5-35/ release note]. Now you just need to add the line {{ic|1=AutoEnable=true}} in {{ic|/etc/bluetooth/main.conf}} at the bottom in the {{ic|[Policy]}} section:
  
{{hc|/etc/udev/rules.d/10-local.rules|2=
+
{{hc|1=/etc/bluetooth/main.conf|2=
ACTION=="add", KERNEL=="hci[0-9]*", RUN+="/usr/bin/hciconfig hci%n up"}}
+
[Policy]
 +
AutoEnable=true
 +
}}
  
for all interfaces.
+
Then you need to enable the Policy Bluez plugin by adding the {{ic|1=--plugin=policy}} flag to the {{ic|ExecStart}} command in the bluetooth systemd unit file:
 
 
After a suspend/resume-cycle, the device can be powered on automatically using a custom ''systemd'' service:
 
 
 
{{hc|/etc/systemd/system/bluetooth-auto-power@.service|<nowiki>
 
[Unit]
 
Description=Bluetooth auto power on
 
After=bluetooth.service sys-subsystem-bluetooth-devices-%i.device suspend.target
 
  
 +
{{hc|/etc/systemd/system/bluetooth.service.d/policy.conf|2=
 
[Service]
 
[Service]
Type=oneshot
+
ExecStart=
ExecStart=/usr/bin/hciconfig %i up
+
ExecStart=/usr/lib/bluetooth/bluetoothd --plugin=policy
 
+
}}
[Install]
 
WantedBy=suspend.target
 
</nowiki>}}
 
 
 
[[Enable]] an instance of the unit using your bluetooth device name, for example {{ic|bluetooth-auto-power@hci0.service}}.
 
 
 
== Configuration with a graphical front-end ==
 
 
 
The following packages allow for a graphical interface to customize Bluetooth.
 
 
 
=== GNOME Bluetooth ===
 
 
 
[https://wiki.gnome.org/Projects/GnomeBluetooth GNOME Bluetooth] is [[GNOME]]'s Bluetooth tool. The {{Pkg|gnome-bluetooth}} package provides the back-end, {{Pkg|gnome-shell}} provides the status monitor applet, and {{Pkg|gnome-control-center}} provides the configuration front-end GUI that can be accessed by typing Bluetooth on the Activities overview, or with the {{ic|gnome-control-center bluetooth}} command. You can also launch the {{ic|bluetooth-sendto}} command directly to send files to a remote device.
 
 
 
To receive files, you must install the {{Pkg|gnome-user-share}} package. You can then go to ''Settings -> Sharing'' to authorize receiving files from paired devices over Bluetooth.
 
 
 
{{Tip|To add a Bluetooth entry to the ''Send To'' menu in Thunar's file properties menu, see instructions [http://docs.xfce.org/xfce/thunar/send-to here]. (The command that needs to be configured is {{ic|bluetooth-sendto %F}}).}}
 
 
 
=== Bluedevil ===
 
 
 
[https://projects.kde.org/projects/kde/workspace/bluedevil Bluedevil] is [[KDE]]'s Bluetooth tool. It can be [[installed]] with the package {{Pkg|bluedevil}} (KDE Plasma 5).
 
 
 
If there is no Bluetooth icon visible in Dolphin and in the system tray, enable it in the system tray options or add a widget. You can configure Bluedevil and detect Bluetooth devices by clicking the icon. An interface is also available from the KDE System Settings.
 
 
 
=== Blueberry ===
 
 
 
''Blueberry'' is an alternative front-end for GNOME Bluetooth, which works in all desktop environments. It can be installed with the {{Pkg|blueberry}} package. It provides a configuration tool (''blueberry'') and a system tray applet (''blueberry-tray'').
 
 
 
=== Blueman ===
 
 
 
See [[Blueman]].
 
 
 
== Using Obex for sending and receiving files ==
 
=== ObexFS ===
 
Another option, rather than using KDE or Gnome Bluetooth packages, is ObexFS which allows for the mounting of phones which are treated like any other filesystem.
 
{{Note|To use ObexFS, one needs a device that provides an ObexFTP service.}}
 
 
 
Install {{Pkg|obexfs}} and mount supported phones by running:
 
$ obexfs -b ''MAC_address_of_device'' /mountpoint
 
 
 
Once you have finished, to unmount the device use the command:
 
$ fusermount -u /mountpoint
 
 
 
For more mounting options see http://dev.zuckschwerdt.org/openobex/wiki/ObexFs
 
 
 
{{Note|Ensure that the bluetooth device you are mounting is '''not''' set to mount ''read-only''. You should be able to do this from the device's settings. If the device is mounted ''read-only'' you may encounter a permissions error when trying to transfer files to the device.}}
 
 
 
=== ObexFTP transfers ===
 
 
 
If your device supports the Obex FTP service but you do not wish to mount the device you can transfer files to and from the device using the obexftp command.
 
 
 
To send a file to a device run the command:
 
 
 
$ obexftp -b ''MAC_address_of_device'' -p /path/to/file
 
  
To retrieve a file from a device run the command:
+
== Audio ==
  
$ obexftp -b ''MAC_address_of_device'' -g filename
+
In order to be able to use audio equipment like bluetooth headphones or speakers, you need to install the additional {{Pkg|pulseaudio-bluetooth}} package.
  
{{Note|Ensure that the file you are retrieving is in the device's ''exchange folder''. If the file is in a subfolder of the exchange folder then provide the correct path in the command.}}
+
Please have a look at the [[Bluetooth headset]] page for more information about bluetooth audio and bluetooth headsets.
 
 
=== Obex Object Push ===
 
For devices that do not support Obex FTP service, check if Obex Object Push is supported.
 
 
 
# sdptool browse ''XX:XX:XX:XX:XX:XX''
 
 
 
Read the output, look for Obex Object Push, remember the channel for this service. If supported, one can use {{pkg|ussp-push}} to send files to this device:
 
 
 
# ussp-push ''XX:XX:XX:XX:XX:XX''@''CHANNEL'' ''file'' ''wanted_file_name_on_phone''
 
  
 
=== Using your computer's speakers as a bluetooth headset ===
 
=== Using your computer's speakers as a bluetooth headset ===
  
This can allow you to do things such as playing what is on your phone through your computer speakers.
+
In order to enable your system to be detected as an A2DP sink (e.g. to play music from your phone via your computer speakers), add the following to the file {{ic|/etc/bluetooth/audio.conf}} (create it if not present):
 
 
Add the following to the file {{ic|/etc/bluetooth/audio.conf}} (create it if not present):
 
  
 
  [General]
 
  [General]
 
  Enable=Source
 
  Enable=Source
  
More info in:
+
Then enable the A2DP Bluez plugin by adding the {{ic|1=--plugin=a2dp}} flag to the {{ic|ExecStart}} command in the bluetooth systemd unit file:
* https://gist.github.com/joergschiller/1673341
+
 
* http://www.lightofdawn.org/blog/?viewDetailed=00031
+
{{hc|/etc/systemd/system/bluetooth.service.d/a2dp.conf|2=
 +
[Service]
 +
ExecStart=
 +
ExecStart=/usr/lib/bluetooth/bluetoothd --plugin=a2dp
 +
}}
  
== Examples ==
+
== Troubleshooting ==
  
All examples have been moved to the [[bluez4]] article. They need to be checked and fixed for use with bluez5.
+
{{Out of date|Replace hciconfig with newer commands.}}
  
== Troubleshooting ==
+
=== Deprecated BlueZ tools ===
  
=== bluetoothctl ===
+
Eight BlueZ tools [https://git.kernel.org/pub/scm/bluetooth/bluez.git/commit/?id=b1eb2c4cd057624312e0412f6c4be000f7fc3617 were deprecated] and removed from {{Pkg|bluz-utils}}{{Broken package link|package not found}}, although not all of them were superseded by newer tools. The {{AUR|bluez-utils-compat}} package provides an alternative version of {{Pkg|bluz-utils}}{{Broken package link|package not found}} with the deprecated tools.
If bluetoothctl cannot find any controller, the bluetooth device may be blocked. Try to unblock it using {{Pkg|rfkill}}:
 
  
# rfkill unblock bluetooth
+
{| class="wikitable" style="max-width: 50em;"
 +
|-
 +
! Deprecated tool
 +
! Most likely replacement
 +
|-
 +
| [https://manpages.debian.org/stretch/bluez/gatttool.1.en.html gatttool] || btgatt-client, [https://git.kernel.org/cgit/bluetooth/bluez.git/tree/doc/gatt-api.txt D-Bus Gatt API]
 +
|-
 +
| [https://manpages.debian.org/stretch/bluez/hciattach.1.en.html hciattach] || btattach
 +
|-
 +
| [https://manpages.debian.org/stretch/bluez/hciconfig.1.en.html hciconfig] || btmgmt (and bluetoothctl?)
 +
|-
 +
| [https://manpages.debian.org/stretch/bluez-hcidump/hcidump.1.en.html hcidump] || btmon (and btsnoop)
 +
|-
 +
| [https://manpages.debian.org/stretch/bluez/hcitool.1.en.html hcitool] || missing, [https://git.kernel.org/cgit/bluetooth/bluez.git/tree/doc/device-api.txt D-Bus Device API] available
 +
|-
 +
| [https://manpages.debian.org/stretch/bluez/rfcomm.1.en.html rfcomm]
 +
| rowspan="2" | missing, implement with [https://git.kernel.org/cgit/bluetooth/bluez.git/tree/doc/profile-api.txt D-Bus Profile1 API]?
 +
|-
 +
| [https://manpages.debian.org/stretch/bluez/ciptool.1.en.html ciptool]
 +
|-
 +
| style="vertical-align: top;" | [https://manpages.debian.org/stretch/bluez/sdptool.1.en.html sdptool]
 +
| missing, functionality seems to be scattered over different D-Bus objects: [https://git.kernel.org/cgit/bluetooth/bluez.git/tree/doc/profile-api.txt Profile], [https://git.kernel.org/cgit/bluetooth/bluez.git/tree/doc/advertising-api.txt Advertising], and the UUIDs arrays in [https://git.kernel.org/cgit/bluetooth/bluez.git/tree/doc/device-api.txt device] and [https://git.kernel.org/cgit/bluetooth/bluez.git/tree/doc/adapter-api.txt adapter].
 +
|}
  
 
=== gnome-bluetooth ===
 
=== gnome-bluetooth ===
  
 
If you see this when trying to enable receiving files in bluetooth-properties:
 
If you see this when trying to enable receiving files in bluetooth-properties:
 +
 
  Bluetooth OBEX start failed: Invalid path
 
  Bluetooth OBEX start failed: Invalid path
 
  Bluetooth FTP start failed: Invalid path
 
  Bluetooth FTP start failed: Invalid path
Then install {{Pkg|xdg-user-dirs}} and issue:
+
 
$ xdg-user-dirs-update
+
Then make sure that the [[XDG user directories]] exist.
You can edit the paths using:
 
$ vi ~/.config/user-dirs.dirs
 
  
 
=== Bluetooth USB Dongle ===
 
=== Bluetooth USB Dongle ===
Line 226: Line 218:
 
         TX bytes:38 acl:0 sco:0 commands:11 errors:0
 
         TX bytes:38 acl:0 sco:0 commands:11 errors:0
 
}}
 
}}
 
If this fails with an error like:
 
Operation not possible due to RF-kill
 
it could be due either to the {{ic|rfkill}} utility, in which case it should be resolved with
 
# rfkill unblock all
 
or, it could simply be the hardware switch of the computer. The hardware bluetooth switch (at least sometimes) controls access to USB bluetooth dongles also. Flip/press this switch and try bringing the device up again.
 
  
 
To verify that the device was detected you can use {{ic|hcitool}} which is part of the {{ic|bluez-utils}}. You can get a list of available devices and their identifiers and their MAC address by issuing:
 
To verify that the device was detected you can use {{ic|hcitool}} which is part of the {{ic|bluez-utils}}. You can get a list of available devices and their identifiers and their MAC address by issuing:
Line 284: Line 270:
  
 
* On some Dell laptops (e.g. Studio 15) you have to switch the Bluetooth mode from HID to HCI. Install the {{Pkg|bluez-hid2hci}} package, then [[udev]] should do this automatically. Alternatively, you can run this command to switch to HCI manually:
 
* On some Dell laptops (e.g. Studio 15) you have to switch the Bluetooth mode from HID to HCI. Install the {{Pkg|bluez-hid2hci}} package, then [[udev]] should do this automatically. Alternatively, you can run this command to switch to HCI manually:
 +
 
  # /usr/lib/udev/hid2hci
 
  # /usr/lib/udev/hid2hci
  
Line 289: Line 276:
  
 
* Sometimes also this simple command helps:
 
* Sometimes also this simple command helps:
 +
 
  # hciconfig hci0 up
 
  # hciconfig hci0 up
  
Line 300: Line 288:
  
 
Cannot discover computer from your phone? Enable PSCAN and ISCAN:
 
Cannot discover computer from your phone? Enable PSCAN and ISCAN:
 +
 
  # enable PSCAN and ISCAN
 
  # enable PSCAN and ISCAN
 
  $ hciconfig hci0 piscan  
 
  $ hciconfig hci0 piscan  
 
  # check it worked
 
  # check it worked
 +
 
{{hc|$ hciconfig|
 
{{hc|$ hciconfig|
 
hci0:  Type: USB
 
hci0:  Type: USB
Line 314: Line 304:
  
 
Try changing device class in {{ic|/etc/bluetooth/main.conf}} as following:
 
Try changing device class in {{ic|/etc/bluetooth/main.conf}} as following:
 +
 
  # Default device class. Only the major and minor device class bits are
 
  # Default device class. Only the major and minor device class bits are
 
  # considered.
 
  # considered.
Line 324: Line 315:
  
 
If you do not get the passkey when you try to pair your Logitech keyboard, type the following command:
 
If you do not get the passkey when you try to pair your Logitech keyboard, type the following command:
 +
 
  # hciconfig hci0 sspmode 0
 
  # hciconfig hci0 sspmode 0
  
Line 336: Line 328:
  
 
bluez5 removed support for the HSP/HFP profiles (telephony headset for [[TeamSpeak]], [[Skype]], etc.). You need to install [[PulseAudio]] (>= version 6) or another application that implements HSP/HFP itself.
 
bluez5 removed support for the HSP/HFP profiles (telephony headset for [[TeamSpeak]], [[Skype]], etc.). You need to install [[PulseAudio]] (>= version 6) or another application that implements HSP/HFP itself.
 
=== Thinkpad Bluetooth Laser Mouse problems ===
 
 
If you are experiencing that your Thinkpad Bluetooth Laser Mouse rapidly connects and then (after a few milliseconds) disconnects again every few seconds (when you move the mouse or press a button), try pairing it with the code {{ic|0000}} instead pairing without a code.
 
  
 
=== Foxconn / Hon Hai / Lite-On Broadcom device ===
 
=== Foxconn / Hon Hai / Lite-On Broadcom device ===
Line 377: Line 365:
  
 
The device should now be available. See [https://bbs.archlinux.org/viewtopic.php?id=162688 BBS#162688] for information on making these changes persistent.
 
The device should now be available. See [https://bbs.archlinux.org/viewtopic.php?id=162688 BBS#162688] for information on making these changes persistent.
 +
 +
=== Device connects, then disconnects after a few moments ===
 +
 +
If you see messages like the following in {{ic|journalctl}} output, and your device fails to connect or disconnects shortly after connecting:
 +
 +
bluetoothd: Unable to get connect data for Headset Voice gateway: getpeername: Transport endpoint is not connected (107)
 +
bluetoothd: connect error: Connection refused (111)
 +
 +
This may be because you have already paired the device with another operating system using the same bluetooth adapter (e.g., dual-booting).  Some devices can't handle multiple pairings associated with the same MAC address (i.e., bluetooth adapter).  You can fix this by re-pairing the device.  Start by removing the device:
 +
 +
$ bluetoothctl
 +
[bluetooth]# devices
 +
Device XX:XX:XX:XX:XX:XX My Device
 +
[bluetooth]# remove XX:XX:XX:XX:XX:XX
 +
 +
Then [[restart]] {{ic|bluetooth.service}}, turn on your bluetooth adapter, make your device discoverable, re-scan for devices, and re-pair your device.  Depending on your bluetooth manager, you may need to perform a full reboot in order to re-discover the device.
 +
 +
=== Device does not connect with an error in journal ===
 +
 +
If you see a message like the following in {{ic|journalctl}} output while trying to connect to a device:
 +
 +
a2dp-source profile connect failed for 9C:64:40:22:E1:3F: Protocol not available
 +
 +
try installing {{Pkg|pulseaudio-bluetooth}} and restarting [[PulseAudio]]. This error can manifest even while using only file transfer.
 +
 +
=== Device does not show up in scan ===
 +
 +
Some devices using bluetooth low energy do not appear when scanning with bluetoothctl, for example the Logitech MX Master. The simplest way I've found to connect them is by installing {{aur|bluez-utils-compat}}, then [[start]] {{ic|bluetooth.service}} and do:
 +
 +
# bluetoothctl
 +
[NEW] Controller (MAC) myhostname [default]
 +
[bluetooth]# power on
 +
[CHG] Controller (MAC) Class: 0x0c010c
 +
Changing power on succeeded
 +
[CHG] Controller (MAC) Powered: yes
 +
[bluetooth]# scan on
 +
Discovery started
 +
[CHG] Controller (MAC) Discovering: yes
 +
 +
In another terminal:
 +
 +
# hcitool lescan
 +
 +
Wait until your device shows up, then Ctrl+C hcitool. bluetoothctl should now see your device and pair normally.

Latest revision as of 14:27, 16 September 2018

Bluetooth is a standard for the short-range wireless interconnection of cellular phones, computers, and other electronic devices. In Linux, the canonical implementation of the Bluetooth protocol stack is BlueZ.

Installation

  1. Install the bluez package, providing the Bluetooth protocol stack.
  2. Install the bluez-utils package, providing the bluetoothctl utility. Alternatively install bluez-utils-compatAUR to additionally have the deprecated BlueZ tools.
  3. The generic Bluetooth driver is the btusb Kernel module. Check whether that module is loaded. If it's not, then load the module.
  4. Start/enable bluetooth.service.
Note:
  • By default the bluetooth daemon will only give out bnep0 devices to users that are a member of the lp group. Make sure to add your user to that group if you intend to connect to a bluetooth tether. You can change the group that is required in the file /etc/dbus-1/system.d/bluetooth.conf.
  • Some Bluetooth adapters are bundled with a Wi-Fi card (e.g. Intel Centrino). These require that the Wi-Fi card is firstly enabled (typically a keyboard shortcut on a laptop) in order to make the Bluetooth adapter visible to the kernel.
  • Some Bluetooth cards (e.g. Broadcom) conflict with the network adapter. Thus, you need to make sure that your Bluetooth device get connected before the network service boot.
  • Some tools such as hcitool and hciconfig have been deprecated upstream, and are no longer included in bluez-utils. Since these tools will no longer be updated, it is recommended that scripts be updated to avoid using them. If you still desire to use them, install bluez-utils-compatAUR. See FS#53110 and the Bluez mailing list for more information.

Front-ends

Console

  • bluetoothctl — Pairing a device from the shell is one of the simplest and most reliable options.
http://www.bluez.org/ || bluez-utils

Graphical

The following packages allow for a graphical interface to customize Bluetooth.

  • GNOME BluetoothGNOME's Bluetooth tool.
    • gnome-bluetooth provides the back-end
    • gnome-shell provides the status monitor applet
    • gnome-control-center provides the configuration front-end GUI that can be accessed by typing Bluetooth on the Activities overview, or with the gnome-control-center bluetooth command.
    • You can also launch the bluetooth-sendto command directly to send files to a remote device.
    • To receive files, open the Bluetooth settings panel; you can only receive whilst the Bluetooth panel is open.
    • To add a Bluetooth entry to the Send To menu in Thunar's file properties menu, see instructions here. (The command that needs to be configured is bluetooth-sendto %F).
https://wiki.gnome.org/Projects/GnomeBluetooth ||
  • BluedevilKDE's Bluetooth tool. If there is no Bluetooth icon visible in Dolphin and in the system tray, enable it in the system tray options or add a widget. You can configure Bluedevil and detect Bluetooth devices by clicking the icon. An interface is also available from the KDE System Settings.
https://projects.kde.org/projects/kde/workspace/bluedevil || bluedevil
  • Blueberry — Linux Mint's spin-off of GNOME Bluetooth, which works in all desktop environments. Blueberry doesn't support receiving files through Obex Object Push.
https://github.com/linuxmint/blueberry || blueberry
  • Blueman — A full featured Bluetooth manager.
https://github.com/blueman-project/blueman || blueman
  • ObexFTP — A tool for transferring files to/from any OBEX enabled device.
http://dev.zuckschwerdt.org/openobex/wiki/ObexFtp || obexftpAUR

Pairing

Tango-view-fullscreen.pngThis article or section needs expansion.Tango-view-fullscreen.png

Reason: Step 5 is unclear. What are Bluetooth agents? (Discuss in Talk:Bluetooth#)
Note: Before using the bluetooth device, make sure that it is not blocked by rfkill.

This section describes directly configuring bluez5 via the bluetoothctl CLI, which might not be necessary if you are using an alternative front-end tool (such as GNOME Bluetooth).

The exact procedure depends on the devices involved and their input functionality. What follows is a general outline of pairing a device using bluetoothctl.

Start the bluetoothctl interactive command. Input help to get a list of available commands.

  1. (optional) Select a default controller with select MAC_address.
  2. Enter power on to turn the power to the controller on. It is off by default and will turn off again each reboot, see #Auto power-on after boot.
  3. Enter devices to get the MAC Address of the device with which to pair.
  4. Enter device discovery mode with scan on command if device is not yet on the list.
  5. Turn the agent on with agent on or choose a specific agent: if you press tab twice after agent you should see a list of available agents, e.g. DisplayOnly KeyboardDisplay NoInputNoOutput DisplayYesNo KeyboardOnly off on.
  6. Enter pair MAC_address to do the pairing (tab completion works).
  7. If using a device without a PIN, one may need to manually trust the device before it can reconnect successfully. Enter trust MAC_address to do so.
  8. Enter connect MAC_address to establish a connection.

An example session may look this way:

# bluetoothctl 
[NEW] Controller 00:10:20:30:40:50 pi [default]
[bluetooth]# agent KeyboardOnly 
Agent registered
[bluetooth]# default-agent 
Default agent request successful
[bluetooth]# power on
Changing power on succeeded
[CHG] Controller 00:10:20:30:40:50 Powered: yes
[bluetooth]# scan on
Discovery started
[CHG] Controller 00:10:20:30:40:50 Discovering: yes
[NEW] Device 00:12:34:56:78:90 myLino
[CHG] Device 00:12:34:56:78:90 LegacyPairing: yes
[bluetooth]# pair 00:12:34:56:78:90
Attempting to pair with 00:12:34:56:78:90
[CHG] Device 00:12:34:56:78:90 Connected: yes
[CHG] Device 00:12:34:56:78:90 Connected: no
[CHG] Device 00:12:34:56:78:90 Connected: yes
Request PIN code
[agent] Enter PIN code: 1234
[CHG] Device 00:12:34:56:78:90 Paired: yes
Pairing successful
[CHG] Device 00:12:34:56:78:90 Connected: no
[bluetooth]# connect 00:12:34:56:78:90
Attempting to connect to 00:12:34:56:78:90
[CHG] Device 00:12:34:56:78:90 Connected: yes
Connection successful

Configuration

Auto power-on after boot

By default, your Bluetooth adapter will not power on after a reboot. The former method by using hciconfig hci0 up is deprecated, see the release note. Now you just need to add the line AutoEnable=true in /etc/bluetooth/main.conf at the bottom in the [Policy] section:

/etc/bluetooth/main.conf
[Policy]
AutoEnable=true

Then you need to enable the Policy Bluez plugin by adding the --plugin=policy flag to the ExecStart command in the bluetooth systemd unit file:

/etc/systemd/system/bluetooth.service.d/policy.conf
[Service]
ExecStart=
ExecStart=/usr/lib/bluetooth/bluetoothd --plugin=policy

Audio

In order to be able to use audio equipment like bluetooth headphones or speakers, you need to install the additional pulseaudio-bluetooth package.

Please have a look at the Bluetooth headset page for more information about bluetooth audio and bluetooth headsets.

Using your computer's speakers as a bluetooth headset

In order to enable your system to be detected as an A2DP sink (e.g. to play music from your phone via your computer speakers), add the following to the file /etc/bluetooth/audio.conf (create it if not present):

[General]
Enable=Source

Then enable the A2DP Bluez plugin by adding the --plugin=a2dp flag to the ExecStart command in the bluetooth systemd unit file:

/etc/systemd/system/bluetooth.service.d/a2dp.conf
[Service]
ExecStart=
ExecStart=/usr/lib/bluetooth/bluetoothd --plugin=a2dp

Troubleshooting

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: Replace hciconfig with newer commands. (Discuss in Talk:Bluetooth#)

Deprecated BlueZ tools

Eight BlueZ tools were deprecated and removed from bluz-utils[broken link: package not found], although not all of them were superseded by newer tools. The bluez-utils-compatAUR package provides an alternative version of bluz-utils[broken link: package not found] with the deprecated tools.

Deprecated tool Most likely replacement
gatttool btgatt-client, D-Bus Gatt API
hciattach btattach
hciconfig btmgmt (and bluetoothctl?)
hcidump btmon (and btsnoop)
hcitool missing, D-Bus Device API available
rfcomm missing, implement with D-Bus Profile1 API?
ciptool
sdptool missing, functionality seems to be scattered over different D-Bus objects: Profile, Advertising, and the UUIDs arrays in device and adapter.

gnome-bluetooth

If you see this when trying to enable receiving files in bluetooth-properties:

Bluetooth OBEX start failed: Invalid path
Bluetooth FTP start failed: Invalid path

Then make sure that the XDG user directories exist.

Bluetooth USB Dongle

If you are using a USB dongle, you should check that your Bluetooth dongle is recognized. You can do that by running journalctl -f when you have plugged in the USB dongle (or inspecting /var/log/messages.log). It should look something like the following (look out for hci):

Feb 20 15:00:24 hostname kernel: [ 2661.349823] usb 4-1: new full-speed USB device number 3 using uhci_hcd
Feb 20 15:00:24 hostname bluetoothd[4568]: HCI dev 0 registered
Feb 20 15:00:24 hostname bluetoothd[4568]: Listening for HCI events on hci0
Feb 20 15:00:25 hostname bluetoothd[4568]: HCI dev 0 up
Feb 20 15:00:25 hostname bluetoothd[4568]: Adapter /org/bluez/4568/hci0 has been enabled

If you only get the first two lines, you may see that it found the device but you need to bring it up. Example:

hciconfig -a hci0
hci0:	Type: USB
	BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
	DOWN 
	RX bytes:0 acl:0 sco:0 events:0 errors:0
        TX bytes:0 acl:0 sco:0 commands:0 errors:
# hciconfig hci0 up
hciconfig -a hci0
hci0:	Type: USB
	BD Address: 00:02:72:C4:7C:06 ACL MTU: 377:10 SCO MTU: 64:8
	UP RUNNING 
	RX bytes:348 acl:0 sco:0 events:11 errors:0
        TX bytes:38 acl:0 sco:0 commands:11 errors:0

To verify that the device was detected you can use hcitool which is part of the bluez-utils. You can get a list of available devices and their identifiers and their MAC address by issuing:

$ hcitool dev
Devices:
        hci0	00:1B:DC:0F:DB:40

More detailed information about the device can be retrieved by using hciconfig.

$ hciconfig -a hci0
hci0:   Type: USB
        BD Address: 00:1B:DC:0F:DB:40 ACL MTU: 310:10 SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:1226 acl:0 sco:0 events:27 errors:0
        TX bytes:351 acl:0 sco:0 commands:26 errors:0
        Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT 
        Name: 'BlueZ (0)'
        Class: 0x000100
        Service Classes: Unspecified
        Device Class: Computer, Uncategorized
        HCI Ver: 2.0 (0x3) HCI Rev: 0xc5c LMP Ver: 2.0 (0x3) LMP Subver: 0xc5c
        Manufacturer: Cambridge Silicon Radio (10)

Audio devices start to skip at short distance from dongle

If other devices share the same USB host, they can interrupt communication with audio devices. Make sure it is the only device attached to its bus. For example:

$ lsusb
Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 048d:1345 Integrated Technology Express, Inc. Multi Cardreader
Bus 001 Device 003: ID 0424:a700 Standard Microsystems Corp. 2 Port Hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Logitech Bluetooth USB Dongle

There are Logitech dongles (ex. Logitech MX5000) that can work in two modes: Embedded and HCI. In embedded mode dongle emulates a USB device so it seems to your PC that you are using a normal USB mouse/keyoard.

If you hold the little red Button on the USB BT mini-receiver it will enable the other mode. Hold the red button on the BT dongle and plug it into the computer, and after 3-5 seconds of holding the button, the Bluetooth icon will appear in the system tray. Discussion

Alternatively, you can install the bluez-hid2hci package. When you connect your Logitech dongle it will automatically switch.

hcitool scan: Device not found

  • On some Dell laptops (e.g. Studio 15) you have to switch the Bluetooth mode from HID to HCI. Install the bluez-hid2hci package, then udev should do this automatically. Alternatively, you can run this command to switch to HCI manually:
# /usr/lib/udev/hid2hci
  • If the device will not show up and you have a Windows operating system on your machine, try booting it and enable the bluetooth adapter from windows.
  • Sometimes also this simple command helps:
# hciconfig hci0 up

rfkill unblock: Do not unblock

If your device still soft blocked and you run connman, try this:

$ connmanctl enable bluetooth

My computer is not visible

Cannot discover computer from your phone? Enable PSCAN and ISCAN:

# enable PSCAN and ISCAN
$ hciconfig hci0 piscan 
# check it worked
$ hciconfig
hci0:   Type: USB
        BD Address: 00:12:34:56:78:9A ACL MTU: 192:8 SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:20425 acl:115 sco:0 events:526 errors:0
        TX bytes:5543 acl:84 sco:0 commands:340 errors:0
Note: Check DiscoverableTimeout and PairableTimeout in /etc/bluetooth/main.conf

Try changing device class in /etc/bluetooth/main.conf as following:

# Default device class. Only the major and minor device class bits are
# considered.
#Class = 0x000100 (from default config)
Class = 0x100100

This was the only solution to make my computer visible for my phone.

Logitech keyboard does not pair

If you do not get the passkey when you try to pair your Logitech keyboard, type the following command:

# hciconfig hci0 sspmode 0

If after pairing, the keyboard still does not connect, check the output of hcidump -at. If the latter indicates repeatedly connections-disconnections like the following message:

   status 0x00 handle 11 reason 0x13
   Reason: Remote User Terminated Connection

then, the only solution for now is to install the old Bluetooth stack.

HSP/HFP profiles

bluez5 removed support for the HSP/HFP profiles (telephony headset for TeamSpeak, Skype, etc.). You need to install PulseAudio (>= version 6) or another application that implements HSP/HFP itself.

Foxconn / Hon Hai / Lite-On Broadcom device

Some of these devices require the firmware to be flashed into the device at boot. The firmware is not provided but can converted from a Microsoft Windows .hex file into a .hcd using hex2hcd (which is installed with bluez-utils).

In order to get the right .hex file, try searching the device vendor:product code obtained with lsusb, for example:

   ...
   Bus 002 Device 004: ID 04ca:2006 Lite-On Technology Corp. Broadcom BCM43142A0 Bluetooth Device
   ...

or

   Bus 004 Device 004: Id 0489:e031 Foxconn / Hon Hai

Alternatively, boot into Windows (a virtual machine installation will suffice) and get the firmware name from the Device Manager utility. If you want to know the model of your device but cannot see it in lsusb, you might see it in lsusb -v as iProduct.

The .hex file can be extracted from the downloaded Windows driver without having to run Windows for it. Download the right driver, for example Bluetooth Widcomm (listed among the drivers for Lifebook P771), which contains the drivers for many Broadcomm devices. In case of Bluetooth Widcomm, the driver is a self-extracting RAR archive, so it can be extracted using unrar x. To find out which of the many .hex files is the right one for you, look in the file Win32/bcbtums-win7x86-brcm.inf and search for [RAMUSBE031.CopyList], where E031 should be replaced with the product code (the second hex number in lsusb) of your device in upper-case. Underneath you should see the file name of the right .hex file.

Once you have the .hcd file, copy it into /lib/firmware/brcm/BCM.hcd - this filename is suggested by dmesg and it may change in your case so check your dmesg output in order to verify. Then reload the btusb module:

# rmmod btusb
# modprobe btusb

In some cases (with older kernels?), you have to flash the .hcd file with the brcm_patchram_plus utility, provided by brcm_patchram_plus-gitAUR[broken link: archived in aur-mirror]. First, make sure in dmesg that the device is recognized by btusb as a bluetooth device. Then, run the following (replace 04ca 2006 with your vendor product pair):

# echo '04ca 2006' > /sys/bus/usb/drivers/btusb/new_id
    

Turn on the device:

# hciconfig hci0 up

Flash the firmware:

# brcm_patchram_plus_usb --patchram fw-04ca_2006.hcd hci0

The device should now be available. See BBS#162688 for information on making these changes persistent.

Device connects, then disconnects after a few moments

If you see messages like the following in journalctl output, and your device fails to connect or disconnects shortly after connecting:

bluetoothd: Unable to get connect data for Headset Voice gateway: getpeername: Transport endpoint is not connected (107)
bluetoothd: connect error: Connection refused (111)

This may be because you have already paired the device with another operating system using the same bluetooth adapter (e.g., dual-booting). Some devices can't handle multiple pairings associated with the same MAC address (i.e., bluetooth adapter). You can fix this by re-pairing the device. Start by removing the device:

$ bluetoothctl
[bluetooth]# devices
Device XX:XX:XX:XX:XX:XX My Device
[bluetooth]# remove XX:XX:XX:XX:XX:XX

Then restart bluetooth.service, turn on your bluetooth adapter, make your device discoverable, re-scan for devices, and re-pair your device. Depending on your bluetooth manager, you may need to perform a full reboot in order to re-discover the device.

Device does not connect with an error in journal

If you see a message like the following in journalctl output while trying to connect to a device:

a2dp-source profile connect failed for 9C:64:40:22:E1:3F: Protocol not available

try installing pulseaudio-bluetooth and restarting PulseAudio. This error can manifest even while using only file transfer.

Device does not show up in scan

Some devices using bluetooth low energy do not appear when scanning with bluetoothctl, for example the Logitech MX Master. The simplest way I've found to connect them is by installing bluez-utils-compatAUR, then start bluetooth.service and do:

# bluetoothctl
[NEW] Controller (MAC) myhostname [default]
[bluetooth]# power on
[CHG] Controller (MAC) Class: 0x0c010c
Changing power on succeeded
[CHG] Controller (MAC) Powered: yes
[bluetooth]# scan on
Discovery started
[CHG] Controller (MAC) Discovering: yes

In another terminal:

# hcitool lescan

Wait until your device shows up, then Ctrl+C hcitool. bluetoothctl should now see your device and pair normally.