Bluetooth GPRS Howto
This Howto will describe, how to set up a GPRS Internet connection using bluetooth device and compatible mobile phone.
- Linux compatible bluetooth device
- Bluetooth enabled mobile phone - I'm using Nokia N70
- Install bluez-utils, bluez-libs and dbus (install also ppp if you havent):
pacman -S bluez-utils bluez-libs dbus
- Start dbus and bluetooth service:
/etc/rc.d/dbus start /etc/rc.d/bluetooth start
- Scan for nearby bluetooth devices:
hcitool scan Scanning ... 00:19:79:89:13:8E Penpen N70Now, mark that above address, it's the bluetooth hardware address of your mobile phone (provided that the name in the right matches what you have written in the phone).
- Scan, which channel is used for Dial-Up Networking:
sdptool search DUN Inquiring ... Searching for DUN on 00:19:79:89:13:8E ... Service Name: Dial-Up Networking Service RecHandle: 0x10007 Service Class ID List: "Dialup Networking" (0x1103) Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 3 Language Base Attr List: code_ISO639: 0x454e encoding: 0x6a base_offset: 0x100 Profile Descriptor List: "Dialup Networking" (0x1103) Version: 0x0100Now check the line beginning with "Channel:" - it contains the channel which is used for Dial-Up Network and it is not necessarily 1 and so is the case with my Nokia N70; my phone uses channel 3.
- Next, edit /etc/bluetooth/hcid.conf . Set the following in options section:
autoinit yes; security auto;Editing the same file, comment out passkey, as it is not used actually. Also, in the device section change the line beginning with name to:
name "BlueZ (%h)";
- Now edit /etc/rfcomm.conf , first uncomment the rfcomm0 device section. Then add/change the lines as this (if necessary):
bind yes; device 00:19:79:89:13:8E; channel 3; comment "GPRS dialup";Of course, you should use your device address and the appropriate channel.
- Edit the bluetooth script in /etc/rc.d/bluetooth to make the rfcomm start when bluetooth system is started:
- Restart the bluetooth service:
- Look, whether the bluetooth device is bound to the phone. ll should look like this:
ll /dev/rfcomm0 crw-rw---- 1 root tty 216, 0 2007-08-10 21:32 /dev/rfcomm0
- Now comes the interesting part. You see, there must be an agreed password for connecting to the phone's modem. And this password is set up in an awkward way. First decide a password. Then open another root console, type there the needed password setter program command, but don't press enter yet. The situation is like in the following picture: