Bluetooth GPRS Howto
Revision as of 23:29, 10 August 2007 by Usv (section 10 ok)
This Howto will describe, how to set up a GPRS Internet connection using bluetooth device and compatible mobile phone.
- Linux compatible bluetooth device
- Bluetooth enabled mobile phone - I'm using Nokia N70
- Install bluez-utils, bluez-libs and dbus (install also ppp if you havent):
pacman -S bluez-utils bluez-libs dbus
- Start dbus and bluetooth service:
/etc/rc.d/dbus start /etc/rc.d/bluetooth start
- Scan for nearby bluetooth devices:
hcitool scan Scanning ... 00:19:79:89:13:8E Penpen N70Now, mark that above address, it's the bluetooth hardware address of your mobile phone (provided that the name in the right matches what you have written in the phone).
- Scan, which channel is used for Dial-Up Networking:
sdptool search DUN Inquiring ... Searching for DUN on 00:19:79:89:13:8E ... Service Name: Dial-Up Networking Service RecHandle: 0x10007 Service Class ID List: "Dialup Networking" (0x1103) Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 3 Language Base Attr List: code_ISO639: 0x454e encoding: 0x6a base_offset: 0x100 Profile Descriptor List: "Dialup Networking" (0x1103) Version: 0x0100Now check the line beginning with "Channel:" - it contains the channel which is used for Dial-Up Network and it is not necessarily 1 and so is the case with my Nokia N70; my phone uses channel 3.
- Next, edit /etc/bluetooth/hcid.conf . Set the following in options section:
autoinit yes; security auto;Editing the same file, comment out passkey, as it is not used actually. Also, in the device section change the line beginning with name to:
name "BlueZ (%h)";
- Now edit /etc/rfcomm.conf , first uncomment the rfcomm0 device section. Then add/change the lines as this (if necessary):
bind yes; device 00:19:79:89:13:8E; channel 3; comment "GPRS dialup";Of course, you should use your device address and the appropriate channel.
- Edit the bluetooth script in /etc/rc.d/bluetooth to make the rfcomm start when bluetooth system is started:
- Restart the bluetooth service:
- Look, whether the bluetooth device is bound to the phone. ll should look like this:
ll /dev/rfcomm0 crw-rw---- 1 root tty 216, 0 2007-08-10 21:32 /dev/rfcomm0
- Now comes the interesting part. You see, there must be an agreed password for connecting to the phone's modem. And this password is set up in an awkward way. First decide a password. Then open another root console, type there (subsitute your phone's hardware address and password accordingly)
passkey-agent 8922 00:19:79:89:13:8E, but don't press enter yet. On another root window, issue
cat /dev/rfcomm0and immidiately after that execute the typed passkey-agent command in other window. Situation is like this http://asuka.fi/u/jpaalija/tmp/catting_passkey-agent_ready.png The phone should now show something like this: http://asuka.fi/u/jpaalija/tmp/passcode_dialog.jpg . Quickly, enter the passcode (http://asuka.fi/u/jpaalija/tmp/passcode_entered.jpg) and press "Ok". If the passkey-agent prints something like
Passkey request for device 00:19:79:89:13:8E Passkey service has been releasedyou have no need to hurry anymore as you are almost set. Next, go to Menu->Connectivity->Bluetooth (http://asuka.fi/u/jpaalija/tmp/bluetooth_menu.jpg), select right for paired devices (http://asuka.fi/u/jpaalija/tmp/bluetooth_paired.jpg), select Options->Set as authorized (http://asuka.fi/u/jpaalija/tmp/bluetooth_set_auth.jpg), confirm (http://asuka.fi/u/jpaalija/tmp/bluetooth_trusted_confirm.jpg) and you are done! (http://asuka.fi/u/jpaalija/tmp/bluetooth_trusted_ok.jpg)