This article describes how to set up a Bluetooth mouse through the command line without relying upon a graphical application.
Install the Bluetooth for more information.package which contains the current Linux bluetooth stack (Bluez5). You may also want to install which provides the bluetoothctl utility. See
- Ensure that the bluetooth daemon is started before continuing.
- Ensure that the bluetooth device is not blocked by rfkill.
The bluetoothctl utility provides a simple interface for configuring bluetooth devices. The text below is an example of how you can connect a bluetooth mouse using bluetoothctl:
# bluetoothctl [bluetooth]# list Controller <controller mac> BlueZ 5.5 [default] [bluetooth]# select <controller mac> [bluetooth]# power on [bluetooth]# scan on [bluetooth]# agent on [bluetooth]# devices Device <mouse mac> Name: Bluetooth Mouse [bluetooth]# pair <mouse mac> [bluetooth]# trust <mouse mac> [bluetooth]# connect <mouse mac>
If you experience mouse lag you can try to increase the polling rate. See Mouse polling rate for more information.
Problems with the USB dongle
If you have trouble with your USB dongle, you may also want to try:
# modprobe -v rfcomm
At this point, you should get an hci0 device with:
# hcitool dev
Sometimes the device is not active right away. Try starting the interface with:
# hciconfig hci0 up
and searching for devices as shown above.
Mouse always disconnect
If the mouse stops working but works again after restarting bluetooth, you may need to disable USB autosuspend for the selected device.
The issue may also lie in the device timeout and HID settings. See Bluetooth#Thinkpad Bluetooth Laser Mouse problems.
Apple Magic Mouse scroll speed
If the scroll speed is too slow, you can try
# rmmod hid_magicmouse # modprobe hid_magicmouse scroll_acceleration=1 scroll_speed=55
Scroll speed can be set from 0 to 63.
If the speed suits you, you can make the change permanent in
options hid_magicmouse scroll_acceleration=1 scroll_speed=55
Apple Magic Mouse middle click
If you find the middle click to be too finicky, you can disable it
# rmmod hid_magicmouse # modprobe hid_magicmouse emulate_3button=0
If this setting suits you, you can make the change permantent in
options hid_magicmouse emulate_3button=0
Mouse pairing and dual boot
When dual booting Windows and Linux, you may find yourself having to repair your Bluetooth mouse again and again. This will happen every time you switch OS, because when you pair your device, your Bluetooth service generates a unique set of pairing keys.
First, your computer stores the Bluetooth device's mac address and pairing key. Second, your Bluetooth device stores your computer's mac address and the matching key. This usually works fine, but the mac address for your Bluetooth port will be the same on both Linux and Windows (it is set on the hardware level). However, when you re-pair the device in Windows or Linux, it generates a new key. That key overwrites the previously stored key on the Bluetooth device. Windows overwrites the Linux key and vice versa.
To fix the problem, follow the instructions on this post at StackExchange.