The kernel provides for a convenient way to configure all sorts of advanced settings to enable you to quickly and conveniently boot into your existing system with varying levels of debugging output extended kernel parameters. It is very easy and useful to create several levels of debugging just by adding additional entries to your bootloader configuration. And if you ever have issues or problems down the road due to a power-failure or hardware failure, it can save you hours of trouble, and of course nothing can beat debugging output when it comes to learning about your system.
First, see the Kernel parameters article for method to add a kernel parameter for different boot loaders.
- 1 Debug levels
- 2 Debug methods
- 3 Troubleshooting
- 4 External Links
A quick way to see more verbose messages on your console is to boot up your bootloader entry after appending
verbose to the kernel line.
debug kernel parameter to your kernel line is recognized by a lot of Linux internals and enables quite a bit of debugging compared to the default.
An even more impressive kernel parameter is the
ignore_loglevel, which causes the system to ignore any loglevel and keeps the internal loglevel at the maximum debugging level, basically rendering dmesg unable to lower the debug level.
If the "Heavy Debug" seemed like a lot of output, that is about half of the logging that occurs with kernel parameters:
debug ignore_loglevel log_buf_len=10M print_fatal_signals=1 LOGLEVEL=8 earlyprintk=vga,keep sched_debug
This does a couple things:
- It uses the
earlyprintkparameter to setup your kernel for early printing of messages to your vga screen.
keepparameter just lets it stay on the screen longer. This will let you see logs that normally are hidden due to the boot-up process.
log_buf_len=10Mchanges the log buffer length to 10MB
- Instructs that any fatal signals be printed with
- With the last one,
sched_debug, you can look up in the very excellent kernel documentation on kernel parameters.
The first few debugging kernel parameters turn on really verbose debugging. This kind of debugging is absolutely critical if you want to max out your system or just learn more about what is going on behind the scenes. But there is a final trick that is my favorite, which is the ability to set both environment variables and, more importantly, module parameters at boot.
As an example, here is some truly insane debugging kernel parameters. Note that the actual GRUB entry is all on one line. This turns on many devices to be at the absolute max debug level. The machine may be slower than a TI-89 calculator (See Improve Boot Performance).
rootwait ignore_loglevel debug debug_locks_verbose=1 sched_debug initcall_debug mminit_loglevel=4 udev.log_priority=8 loglevel=8 earlyprintk=vga,keep log_buf_len=10M print_fatal_signals=1 apm.debug=Y i8042.debug=Y drm.debug=1 scsi_logging_level=1 usbserial.debug=Y option.debug=Y pl2303.debug=Y firewire_ohci.debug=1 hid.debug=1 pci_hotplug.debug=Y pci_hotplug.debug_acpi=Y shpchp.shpchp_debug=Y apic=debug show_lapic=all hpet=verbose lmb=debug pause_on_oops=5 panic=10 sysrq_always_enabled
A couple key items are
sysrq_always_enabled which forces on the SysRq magic, which really is a lifesaver when debugging at this level, as your machine will freeze/stop-responding sometimes, and it is nice to use SysRq to kill all tasks, change the log level, unmount all file systems, or do a hard reboot. Another key parameter is
initcall_debug, which debugs the init process in excruciating detail, which can be very useful at times. The last parameter I find very useful is
udev.log_priority=8 to turn on udev logging.
Break into Init
For instance, if you add
break=y to your kernel command line, init will pause early in the boot process (after loading modules) and launch an interactive sh shell which can be used for troubleshooting purposes. Normal boot continues after logging out. This is very similar to the shell that shows up if your computer gets turned off before it is able to shutdown properly. But using this parameter lets you enter into this mode differently at will.
The awesome parameter
udev.log_priority=8 does the same thing as editing the file
/etc/udev/udev.conf except it executes earlier, turning on debugging output for udev. If you want to know your hardware, that is the key parameter right there. Another trick is if you change the
/etc/udev/udev.conf to be verbose, then you can make your initramfs image include that file to turn on verbose udev debugging by adding it to your
which, on Arch, is as easy as
# mkinitcpio -p linux
Debugging udev is important because the initramfs performs a root change at the end of its run to usually launch a program like
/sbin/init as part of a chroot, and unless the new file system has a valid
/dev directory, udev must be initialized before invoking chroot in order to provide
exec chroot . /sbin/init <dev/console >dev/console 2>&1
So basically, you are not able to view the logs that are generated before
/dev/console is initialized by udev or by a special initramfs you compiled yourself. One method the kernel developers use to be able to still get the log messages generated before
/dev/console is available, is to provide an alternative console that you can enable or disable from GRUB.
If you read through the kernel documentation regarding debugging, you will read about netconsole, which can be compiled into your kernel or loaded at runtime as a module. Having a netconsole entry in your kernel parameters is most excellent for debugging slower computers like old laptops or thin-clients. It is easy to use:
- Set up a 2nd computer (running Arch) to accept syslog requests on a remote port, which is one line in
- Then you could use a log-color-parser like ccze to view all syslog logs, or just tail your
- On your laptop, boot up and add
firstname.lastname@example.org/12:34:56:78:9a:bc debug ignore_loglevelinto kernel parameters.
- You will start seeing as much logging as you want on your syslog system. This logging lets you view even earlier log output than is available with the
earlyprintk=vgakernel parameter, as netconsole is used by kernel hackers and developers, so it is very powerful.
If you do not have access to GRUB or the kernel boot-time command line, like on a server or virtual machine, as long as you have root permissions, you can still enable this kind of simplistic verbose logging using a neat hack. While you cannot modify the
/proc/cmdline even as root, you can place your own cmdline file on top of
/proc/cmdline, so that accessing
/proc/cmdline actually accesses your file instead.
For example, if I
cat /proc/cmdline, I have the following:
root=/dev/disk/by-label/ROOT ro console=tty1 logo.nologo quiet
So I use a simple sed command to replace
sed 's/ quiet/ verbose/' /proc/cmdline > /root/cmdline
Then I bind mount
/root/cmdline so that it becomes
/proc/cmdline, using the
-n option to mount, so that this mount will not be recorded in the system's mtab.
mount -n --bind -o ro /root/cmdline /proc/cmdline
Now if I
cat /proc/cmdline, I have the following:
root=/dev/disk/by-label/ROOT ro console=tty1 logo.nologo verbose
Output cut off
Cut off when switching resolution
If the first part of your boot output disappears when the resolution changes you can try to disable KMS for debugging.
If your boot output is limited to 4 or 5 pages and you need more so you can use the debug parameters above, add the following item to your Kernel Parameters
You can read more about this in Scrollback buffer.
Repairing with Arch live CD
In case grub is unable to boot your kernel, or if your initramfs is broken, you can boot into a safe system using an Arch live CD. Once finished with repairs, unmount the broken system, and reboot.
Mounting and chrooting a broken system
Once booted and at a console prompt, use the following to mount and repair your broken system (where
First, create the mount point, and mount your root
/ file system to it; then,
cd into it.
# mkdir /mnt/arch # mount /dev/sda3 /mnt/arch # cd /mnt/arch
Now, create the proc, sysfs, and dev file systems
# mount -t proc proc proc/ # mount -t sysfs sys sys/ # mount -o bind /dev dev/
Next, mount the boot partition if you use one.
# mount /dev/sda1 boot/
Finally, chroot into
/mnt/arch which will become
# chroot .
Turn on networking.
Reinstalling with pacman
The author uses pacman in a chrooted broken system to reinstall the kernel, GRUB, initramfs, udev, and any other packages that may be broken and/or needed to get the system up and running.
This will reinstall the kernel and initramfs so check that
/etc/mkinitcpio.conf is correct or remove the file entirely and re-install mkinitcpio.
# pacman -Syyu mkinitcpio linux udev
Afterwards, unmount and reboot.
- List of Tools for UBCD - Can be added to custom menu.lst like memtest
- Official GRUB2 Manual - https://www.gnu.org/software/grub/manual/grub.html
- Ubuntu wiki page for GRUB2 - https://help.ubuntu.com/community/Grub2
- GRUB2 wiki page describing steps to compile for UEFI systems - https://help.ubuntu.com/community/UEFIBooting
- Wikipedia's page on BIOS Boot partition
- QA/Sysrq - Using sysrq
- systemd documentation: Debug Logging to a Serial Console
- How to Isolate Linux ACPI Issues