Difference between revisions of "Brother DCP-7030"

From ArchWiki
Jump to: navigation, search
m (Changed from using Sane to SANE)
m (Moved udev rule into Troubleshooting, made the use of whitespace more consistent.)
Line 17: Line 17:
 
The scanner uses Brother's {{AUR|brscan3}} driver.  
 
The scanner uses Brother's {{AUR|brscan3}} driver.  
  
=== Udev rule ===
+
== Troubleshooting ==
 +
 
 +
=== Printer not recognized ===
 
The printer may need a [[udev]] rule to avoid conflicts with [[SANE]] - see [[CUPS/Troubleshooting#Conflict_with_SANE]].
 
The printer may need a [[udev]] rule to avoid conflicts with [[SANE]] - see [[CUPS/Troubleshooting#Conflict_with_SANE]].
  
 
{{Accuracy|lp group is deprecated ([[Users_and_groups#Pre-systemd_groups]])}}
 
{{Accuracy|lp group is deprecated ([[Users_and_groups#Pre-systemd_groups]])}}
 
{{hc|/etc/udev/rules.d/10-usbprinter.rules|2=ATTR{idVendor}=="04f9", ATTR{idProduct}=="01ea", MODE:="0664", GROUP:="lp", ENV{libsane_matched}:="yes"}}
 
{{hc|/etc/udev/rules.d/10-usbprinter.rules|2=ATTR{idVendor}=="04f9", ATTR{idProduct}=="01ea", MODE:="0664", GROUP:="lp", ENV{libsane_matched}:="yes"}}
 
== Troubleshooting ==
 
  
 
=== Software cannot use the scanner ===
 
=== Software cannot use the scanner ===
 
 
The unit will print but not scan when plugged into some USB 3.0 ports. Use a USB 2.0 port for the printer or disable USB 3.0 by [[blacklisting]] the {{ic|xhci_hcd}} module if necessary.
 
The unit will print but not scan when plugged into some USB 3.0 ports. Use a USB 2.0 port for the printer or disable USB 3.0 by [[blacklisting]] the {{ic|xhci_hcd}} module if necessary.
  
 
=== I cannot print anything from LibreOffice ===
 
=== I cannot print anything from LibreOffice ===
 
 
If you can print a test page from http://localhost:631, but can't print anything from [[LibreOffice]], try to [[pacman#Installing specific packages|install]] {{Pkg|a2ps}}.
 
If you can print a test page from http://localhost:631, but can't print anything from [[LibreOffice]], try to [[pacman#Installing specific packages|install]] {{Pkg|a2ps}}.

Revision as of 20:00, 6 September 2015

This article describes the use of Brother DCP-7030 (multi function laser copier printer) on Archlinux.

Printing

Refer to the main CUPS article for detailed instructions. This printer uses Brother's brother-dcp7030AUR driver.

Scanning

Refer to the main SANE article for detailed instructions. The scanner uses Brother's brscan3AUR driver.

Troubleshooting

Printer not recognized

The printer may need a udev rule to avoid conflicts with SANE - see CUPS/Troubleshooting#Conflict_with_SANE.

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: lp group is deprecated (Users_and_groups#Pre-systemd_groups) (Discuss in Talk:Brother DCP-7030#)
/etc/udev/rules.d/10-usbprinter.rules
ATTR{idVendor}=="04f9", ATTR{idProduct}=="01ea", MODE:="0664", GROUP:="lp", ENV{libsane_matched}:="yes"

Software cannot use the scanner

The unit will print but not scan when plugged into some USB 3.0 ports. Use a USB 2.0 port for the printer or disable USB 3.0 by blacklisting the xhci_hcd module if necessary.

I cannot print anything from LibreOffice

If you can print a test page from http://localhost:631, but can't print anything from LibreOffice, try to install a2ps.