Difference between revisions of "Brother DCP-7030"

From ArchWiki
Jump to: navigation, search
m (Moved udev rule into Troubleshooting, made the use of whitespace more consistent.)
(Printer not recognized: Removed section as duplicate of CUPS/Troubleshooting#Conflict_with_SANE)
Line 18: Line 18:
  
 
== Troubleshooting ==
 
== Troubleshooting ==
 
=== Printer not recognized ===
 
The printer may need a [[udev]] rule to avoid conflicts with [[SANE]] - see [[CUPS/Troubleshooting#Conflict_with_SANE]].
 
 
{{Accuracy|lp group is deprecated ([[Users_and_groups#Pre-systemd_groups]])}}
 
{{hc|/etc/udev/rules.d/10-usbprinter.rules|2=ATTR{idVendor}=="04f9", ATTR{idProduct}=="01ea", MODE:="0664", GROUP:="lp", ENV{libsane_matched}:="yes"}}
 
  
 
=== Software cannot use the scanner ===
 
=== Software cannot use the scanner ===

Revision as of 20:01, 6 September 2015

This article describes the use of Brother DCP-7030 (multi function laser copier printer) on Archlinux.

Printing

Refer to the main CUPS article for detailed instructions. This printer uses Brother's brother-dcp7030AUR driver.

Scanning

Refer to the main SANE article for detailed instructions. The scanner uses Brother's brscan3AUR driver.

Troubleshooting

Software cannot use the scanner

The unit will print but not scan when plugged into some USB 3.0 ports. Use a USB 2.0 port for the printer or disable USB 3.0 by blacklisting the xhci_hcd module if necessary.

I cannot print anything from LibreOffice

If you can print a test page from http://localhost:631, but can't print anything from LibreOffice, try to install a2ps.