Difference between revisions of "Brother DCP-7030"

From ArchWiki
Jump to navigation Jump to search
(Printer not recognized: Removed section as duplicate of CUPS/Troubleshooting#Conflict_with_SANE)
m (Printing: Removed driver instructions (duplicated at CUPS_printer-specific_problems))
Line 11: Line 11:
== Printing ==
== Printing ==
Refer to the main [[CUPS]] article for detailed instructions.
Refer to the main [[CUPS]] article for detailed instructions.
This printer uses Brother's {{AUR|brother-dcp7030}} driver.
== Scanning ==
== Scanning ==

Revision as of 20:05, 6 September 2015

This article describes the use of Brother DCP-7030 (multi function laser copier printer) on Archlinux.


Refer to the main CUPS article for detailed instructions.


Refer to the main SANE article for detailed instructions. The scanner uses Brother's brscan3AUR driver.


Software cannot use the scanner

The unit will print but not scan when plugged into some USB 3.0 ports. Use a USB 2.0 port for the printer or disable USB 3.0 by blacklisting the xhci_hcd module if necessary.

I cannot print anything from LibreOffice

If you can print a test page from http://localhost:631, but can't print anything from LibreOffice, try to install a2ps.