Difference between revisions of "Brother DCP-7030"

From ArchWiki
Jump to: navigation, search
m (Printing: Removed driver instructions (duplicated at CUPS_printer-specific_problems))
(Software cannot use the scanner: Removed as a duplicate of SANE#Scanning_fails_or_hangs_with_scanner_plugged_on_USB3_.28xhci.29_port)
Line 17: Line 17:
  
 
== Troubleshooting ==
 
== Troubleshooting ==
 
=== Software cannot use the scanner ===
 
The unit will print but not scan when plugged into some USB 3.0 ports. Use a USB 2.0 port for the printer or disable USB 3.0 by [[blacklisting]] the {{ic|xhci_hcd}} module if necessary.
 
  
 
=== I cannot print anything from LibreOffice ===
 
=== I cannot print anything from LibreOffice ===
 
If you can print a test page from http://localhost:631, but can't print anything from [[LibreOffice]], try to [[pacman#Installing specific packages|install]] {{Pkg|a2ps}}.
 
If you can print a test page from http://localhost:631, but can't print anything from [[LibreOffice]], try to [[pacman#Installing specific packages|install]] {{Pkg|a2ps}}.

Revision as of 20:09, 6 September 2015

This article describes the use of Brother DCP-7030 (multi function laser copier printer) on Archlinux.

Printing

Refer to the main CUPS article for detailed instructions.

Scanning

Refer to the main SANE article for detailed instructions. The scanner uses Brother's brscan3AUR driver.

Troubleshooting

I cannot print anything from LibreOffice

If you can print a test page from http://localhost:631, but can't print anything from LibreOffice, try to install a2ps.