Brother DCP-7030

From ArchWiki
Jump to: navigation, search


This is a brief tutorial how to setup the Brother DCP-7030 (multi function laser copier printer) on i686 Arch.



Install CUPS (see CUPS page).


It may be necessary to blacklist Usblp module to get AUR driver working. To do that, you may add "!usblp" at the end of your rc.conf MODULES list.



There is the brother-dcp7030 in AUR. It contains driver from Brother.

Install drivers:

% yaourt -S brother-dcp7030

Replace all the /etc/init.d/ occurences by /etc/rc.d/ in the /usr/local/Brother/cupswrapper/cupswrapperDCP7030-2.0.2.

After that replace /etc/rc.d/cups by /etc/rc.d/cupsd and /etc/rc.d/cupsys by /etc/rc.d/cupsd in the above file.


# /usr/local/Brother/cupswrapper/cupswrapperDCP7030-2.0.2

Now go to the CUPS page: http://localhost:631/

Under the Printers tab you should see a DCP7030 printer automatically installed and configured.

Using PPD from hl1250

Unfortunately original driver did not work with DCP-7030 on my PC.

I got this PPD. I replaced all DCP-7020 by DCP-7030. After this I add a new printer manually using this PPD.



Install SANE:

# pacman -S sane

Add your user to scanner group:

# gpasswd -a username scanner
Note: You need to logout/login for this to take effect.


There is the brscan3 in AUR.

Install drivers:

% yaourt -S brscan3

After installing add line brother3 in the /etc/sane.d/dll.conf.

Now you can try to see if SANE recognizes your scanner

$ scanimage -L

For more info see SANE page.