Brother HL-2170W

From ArchWiki
Revision as of 15:13, 14 June 2008 by Timetrap (Talk | contribs) (Initial Page)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Introduction

This is a small tutorial to make the printer Brother HL 2170w work on Arch. There are no drivers available from Openprinting.org at the moment for this printer to work in CUPS. If you previously tried to install the printer in CUPS, remove it.

This printer will work a few different ways; with the HP PCL6 Driver, or with cupswrapper.

First the PCL 6 Driver method:

Using the HP PCL6 Driver

Open a web browser to localhost:631

Click the Add Printer Button (fill out the form) (click Continue)

Select Internet Printing Protocol (IPP) from the drop down menu (click Continue)

In the Device URI field add the following line:

 http://printer:631/ipp/port1

Where printer is the IP address or DNS name of your printer (click Continue)

Select "HP" under Make (click Continue)

Select HP LaserJet Series PCL 6 CUPS (en) (click Add Printer)