Brother HL-2170W

From ArchWiki
Revision as of 05:39, 4 March 2010 by Pointone (talk | contribs) (minor clean-up; I needed additional packages (page still could use some work))
Jump to navigation Jump to search

This is a short tutorial on installing the Brother HL-2170W (and the HL-2140) printer with CUPS on Arch Linux. If you previously tried to install the printer in CUPS, remove it.

This printer will work a few different ways: with Foomatic, with the HP PCL6 driver, or with cupswrapper. For further info on cupswrapper please see the Brother MFC-440CN guide.

Using the foomatic/pxlmono driver

This is the preferred method.

  1. Install CUPS and Foomatic:
    # pacman -S cups foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters
  2. Edit your rc.conf to start cups on boot:
    DAEMONS=(syslog-ng network netfs cups crond)
  3. Open a web browser to http://localhost:631/
  4. Click the Add Printer button on the Administration tab, fill out the form, and click Continue
  5. Pick the Brother HL-2170 from the 'Device:' dropdown menu and continue.
  6. Pick the 'Brother HL-2170W Foomatic/pxlmono (en).' If this option isn't in the list, then you can opt to manually provide the PPD file as follows (keeping the 'Add Printer' page open):
    1. Download the pxlmono PPD file from the OpenPrinting Database (at the bottom of the page) and save it somewhere.
    2. Click 'Browse' and select the PPD file you just downloaded in the 'Add Printer' page.
  7. Now click 'Add Printer' to add the printer. When it asks for a username and password, supply the root account's username and password.
  8. Configure any other options for your printer.
  9. Click on the Printers tab and print a test page.

Using the HP PCL6 driver

This driver is not ideal, but it works. Use the foomatic/pxlmono method above, if possible.

  1. First install CUPS:
    # pacman -S cups
  2. Edit your rc.conf to start cups on boot:
    DAEMONS=(syslog-ng network netfs cups crond)
  3. Start cups:
    # /etc/rc.d/cups start
  4. Open a web browser to http://localhost:631/
  5. Click the Add Printer Button (fill out the form) (click Continue)
  6. Select Internet Printing Protocol (IPP) from the drop down menu (click Continue)
  7. In the Device URI field add the following line:
    Where printer is the IP address or DNS name of your printer (click Continue)
  8. Select "HP" under Make (click Continue)
  9. Select HP LaserJet Series PCL 6 CUPS (en) (click Add Printer)