Difference between revisions of "Brother MFC-420CN"

From ArchWiki
Jump to: navigation, search
m (Scanner)
m (Scanner)
Line 135: Line 135:
 
Example:
 
Example:
 
  # brsaneconfig2 -a name=MFC420CN model=MFC-420CN ip=10.1.1.90
 
  # brsaneconfig2 -a name=MFC420CN model=MFC-420CN ip=10.1.1.90
 +
 +
To test the networked scanner, you can install xsane:
 +
# pacman -S xsane
 +
 +
And run it to verify the installation (as a luser):
 +
$ xsane
 +
  
 
==Troubleshooting==
 
==Troubleshooting==

Revision as of 06:01, 2 February 2009


Introduction

This is a brief tutorial to make the Brother MFC-420CN printer/scanner work on Arch. While this tutorial is based on the MFC-420CN specifically, it can be used as a general guide for most Brother MFC model printers (substituting MFC-420CN for your model where needed). On Brother's Linux Driver page you can find extra information along with drivers for different printer models.

Printer

Prerequisites

This tutorial assumes you have the following packages installed. Failure to do so may result in hard to trace issues with printing.

  • cups
  • ghostscript
  • gsfonts
  • foomatic-filters
  • arch x86_64 requires lib32-libcups

If you previously tried to install the printer in CUPS, remove it and any remaining driver files!!

Brother's scripts make use of the C Shell (csh) instead of the more common Bash. We must install tcsh from the "extra" repo.

# pacman -Sy tcsh

Brother's scripts look for C Shell in /bin/csh but will fail with the error "Bad Interpreter" unless we correct this to /usr/bin/tcsh. As root lets create a symbolic link:

# ln -s /usr/bin/tcsh /bin/csh

Your user is a member of the printer group (lp). Be sure to logout for changes to take affect.

# usermod -aG lp [username]

Additional info about setting up CUPS if needed.

Download printer drivers

Brother actively supplies Linux drivers for it's MFC series printers in RPM and DEB formats. Luckily there are tools to change these formats into something Arch can use.

First create a temporary directory.

Then you must download the official LPR drivers from the Brother website into this directory. Click here to download the MFC-420CN LPR driver (RPM archive).

You should also download the CUPS wrapper script. Click here to download the MFC-420CN CUPS wrapper script (RPM archive). This script creates the filters and PPD file for CUPS automatically saving us from extra work.

Extracting the RPM files

Now you need a small script called rpmextract which allows you to extract files from the RPM you've just downloaded.

In the terminal as root:

# pacman -Sy rpmextract

Extract both RPM files :

$ rpmextract.sh MFC420CNlpr-1.0.2-1.i386.rpm
$ rpmextract.sh cupswrapperMFC420CN-1.0.0-1.i386.rpm

Editing files to make it work with Arch

Arch Linux uses its own file system organization, so we'll have to edit some files. Assuming you are still in the temporary directory you created. You can use your favorite text editor to edit usr/local/Brother/cupswrapper/cupswrapperMFC420CN-1.0.0 and change all instances of /etc/init.d/ to /etc/rc.d/ OR you can just do the following.

As root in terminal:

# sed -i 's|/etc/init.d|/etc/rc.d|' usr/local/Brother/cupswrapper/cupswrapperMFC420CN-1.0.0

Once you've finished this step, copy all of the files to their corresponding directories in your file system :

# cp -r usr/* /usr

Installing the printer (Local USB)

Now lets run the script to install the driver for us.

As root in terminal:

/usr/local/Brother/cupswrapper/cupswrapperMFC420CN-1.0.0

It will stop the cups daemon if it's running, and restart it.

Now go to the CUPS setup page: http://localhost:631/ Click on Manage Printers you should see your MFC-420CN printer automatically installed and configured. Print a test page!

If the test page fails with error "Printer not connected; will retry in 30 seconds..." then.

  1. Click Delete Printer and remove the automatically created printer.
  2. Click Administration --> Find New Printers
  3. You should see your Brother printer listed here, add it!
  4. Print a test page

NOTE: Be sure to add cups to the DAEMON line in rc.conf so it loads everytime at startup.

Installing the printer (Network, Ethernet)

Now lets run the script to install the driver for us.

As root in terminal:

/usr/local/Brother/cupswrapper/cupswrapperMFC420CN-1.0.0

It will stop the cups daemon if it's running, and restart it.

Now go to the CUPS setup page: http://localhost:631/

  1. Click Manage Printers --> Delete Printer and remove the automatically created printer.
  2. Click Administration --> Find New Printers
  3. You should see your Brother printer listed here, add it!
  4. Print a test page

If Find New Printers doesn't list any printers you can try to set it up manually.

  1. Click Add Printer
  2. Location can be left blank, but can have something in it for reference sake, Description can be left blank, but can also have something in it for reference sake. Click continue
  3. Choose the device "Appsocket/HP JetDirect" then click continue
  4. Set the Device URI to socket://192.168.0.10:9100
  5. Select the make Brother
  6. Select the printer Brother MFC-420CN CUPS
  7. Click finish and print a test page.

NOTE: Be sure to add cups to the DAEMON line in rc.conf so it loads everytime at startup.

NOTE: for Brother DCP340-CW. If you would like to print wireless, try and modify the previous added printer using Cups:

  1. Click Printers.
  2. Click Modify Printer for the printer you installed previously
  3. Click Continue
  4. Choose LPD/LPR Host or Printer
  5. Write in the filed Device URI: lpd://192.168.1.199/binary_p1. Of course, replace that ip with yours.
  6. Choose Brother manufacturer and Brother MFC-210 Cups wrapper driver in the next screen
  7. Click on Modify Printer

and you will be able to print also using wifi of DCP340-CW.

Scanner

First, make sure you set up SANE.


This scanner works with Brother's brscan2 driver. (32 bit | 64 bit)

You'll need to extract the files to a temp path:

$ rpmextract brscan2-0.2.4-0.i386.rpm

or, for 64 bit:

$ rpmextract brscan2-0.2.4-0.x86_64.rpm

Now copy the files to their corresponding directories in your file system:

# cp -r /path/to/brscan/usr/* /usr

Now you'll need to add "brother2" to the end of /etc/sane.d/dll.conf
Brother felt it necessary to include a script to do that, so you can also run:

# /usr/local/Brother/sane/setupSaneScan2 -i

For a networked brother scanner:

# brsaneconfig2 -a name=[ANY_NAME] model=[EXACT_MODEL] ip=[IP_ADDR]

Example:

# brsaneconfig2 -a name=MFC420CN model=MFC-420CN ip=10.1.1.90

To test the networked scanner, you can install xsane:

# pacman -S xsane

And run it to verify the installation (as a luser):

$ xsane


Troubleshooting

I can scan as root, but not as a normal user

Make sure your user is in the scanner group:

# gpasswd -a username scanner

then log out and back in.

If you still can't scan as a normal user, check that /usr/lib/sane (or /usr/lib64/sane for 64 bit) are readable and executable for your user/group.

64 bit caveat

The 64 bit RPM has two files in /usr/lib64/, along with two symlinks to each file. However, the Arch64 Sane package will probably look in /usr/lib/ rather than /usr/lib64/, so we'll need to create some more symlinks. And since the symlinks reference the absolute path, not the relative path, ie:

linkedfile -> /usr/lib64/originalfile

rather than

linkedfile -> ./originalfile

a simple cp -r /path/to/brscan/usr/lib64/* /usr/lib/ won't do.

# ln -s /usr/lib64/libbrcolm2.so.1.0.1 /usr/lib/
# ln -s /usr/lib64/libbrscandec2.so.1.0.0 /usr/lib/
# ln -s /usr/lib64/sane/libsane-brother2.so.1.0.7 /usr/lib/sane/
# cd /usr/lib
# ln -s libbrcolm2.so.1.0.1 libbrcolm2.so.1
# ln -s libbrcolm2.so.1 libbrcolm2.so
# ln -s libbrscandec2.so.1.0.0 libbrscandec2.so.1
# ln -s libbrscandec2.so.1 libbrscandec2.so
# cd sane
# ln -s libsane-brother2.so.1.0.7 libsane-brother2.so.1
# ln -s libsane-brother2.so.1 libsane-brother2.so

Here's all of that in a nice bash friendly string:

ln -s /usr/lib64/libbrcolm2.so.1.0.1 /usr/lib/; ln -s /usr/lib64/libbrscandec2.so.1.0.0 /usr/lib/; ln -s /usr/lib64/sane/libsane-brother2.so.1.0.7 /usr/lib/sane/; cd /usr/lib; ln -s libbrcolm2.so.1.0.1 libbrcolm2.so.1; ln -s libbrcolm2.so.1 libbrcolm2.so; ln -s libbrscandec2.so.1.0.0 libbrscandec2.so.1; ln -s libbrscandec2.so.1 libbrscandec2.so; cd sane; ln -s libsane-brother2.so.1.0.7 libsane-brother2.so.1; ln -s libsane-brother2.so.1 libsane-brother2.so

PC FAX

Brother also has a Linux driver for the PC FAX features of this printer. For more information about the PC Fax drivers please see the Brother Linux Driver page.