Difference between revisions of "Brother MFC-465CN"

From ArchWiki
Jump to: navigation, search
(Required packages)
Line 2: Line 2:
  
 
=== Introduction ===
 
=== Introduction ===
The Brother MFC-465CN is a network capable multi-function printer, first produced in 2007. Brother provides Linux printer and scanner drivers for all its machines, however these are not normally distributed with the usual series of Linux distribution printer driver packages (e.g hplip). Before continuing the user should read the ArchLinux CUPS wiki.
+
The Brother MFC-465CN is a network capable multi-function printer, first produced in 2007. Brother provides Linux printer and scanner drivers for all its machines, however these are not normally distributed with the usual series of Linux distribution printer driver packages (e.g hplip). Before continuing the user should read the [[CUPS|CUPS wiki]].
  
 
=== Required packages ===
 
=== Required packages ===
Line 9: Line 9:
 
[[AUR|Install]] [https://aur.archlinux.org/packages/brother-mfc465cn-cupswrapper/ MFC-465CN Cupswrapper] and [https://aur.archlinux.org/packages/brother-mfc465cn-lpr/ MFC-465CN line printer filters] from the [[AUR]]
 
[[AUR|Install]] [https://aur.archlinux.org/packages/brother-mfc465cn-cupswrapper/ MFC-465CN Cupswrapper] and [https://aur.archlinux.org/packages/brother-mfc465cn-lpr/ MFC-465CN line printer filters] from the [[AUR]]
 
   
 
   
{{Note|1=If you use x86_64, you '''must''' also install {{Pkg|lib32-libcups}} (from the multilibs repository) for this printer driver to work! When {{Ic|lib32-libcups}} is not installed, the printer job job queue appears to have been printed successfully, but the printer does nothing and the CUPS logs contain no definitive error messages.}}
+
{{Note|1=If you use x86_64, you '''must''' also install {{Pkg|lib32-libcups}} (from the multilibs repository) for this printer driver to work! When {{Ic|lib32-libcups}} is not installed, the printer job job queue appears to have been printed successfully, but the printer does nothing and the CUPS logs contain no definitive error messages.}} You may need to uncomment the "Multilibs" line in your /etc/pacman.conf file.
 
+
=== Install Brother MFC465 AUR packages ===
+
Fortunately, a number of ArchLinux users have created Arch packages from the .deb and .rpm packages at Brother's Linux website, which removes at least two fiddly steps.
+
  
 
=== Run the "cupswrapper" script ===
 
=== Run the "cupswrapper" script ===
As root run the script: # /usr/local/brother/Printer/mfc465cn/cupswrapper/cupswrappermfc465cn
+
As root run the script:
 +
 
 +
# /usr/local/brother/Printer/mfc465cn/cupswrapper/cupswrappermfc465cn
 +
 
 
This script will stop the cups daemon if it's running, attempt to find and configure your printer, install the drivers and restart CUPS.
 
This script will stop the cups daemon if it's running, attempt to find and configure your printer, install the drivers and restart CUPS.
  
 
=== Configure the Printer on the CUPS Server ===
 
=== Configure the Printer on the CUPS Server ===
Using your browser navigate to the CUPS server: http://localhost:631/
+
Using your browser navigate to the [http://localhost:631/ CUPS server].
In the Administration category, choose Manage printers. There you should see a MFC-465CN printer automatically installed and configured. It is usually configured to use the USB port.
+
In the Administration category, choose Manage printers. There you should see a MFC-465CN printer automatically installed and configured. It is usually configured to use the USB port. If the printer is used as a network printer you need to modify the printer configuration. Choose Modify printer, and select Brother MFC-465CN in the device list. Select Apple/ and enter the printer IP as such:
If the printer is used as a network printer you need to modify the printer configuration. Choose Modify printer, and select Brother MFC-465CN in the device list. If it doesn't exist choose LPD/LPR Host or Printer instead. Then in Device URI you enter the printer IP, e.g lpd://10.0.0.10. You will find the IP address in the LAN configuration on the printer itself. The rest of the configuration is preset, so just choose continue.
+
 
Click to print the test page, and  you can hear the sweet sound of your printer. If not, try to restart your printer, and make sure the printer's state is Idle, accepting jobs.
+
, e.g socket://192.168.0.104:9100 . Your IP address will be different - find in the LAN configuration on the printer itself. The rest of the configuration is preset, so just choose continue. Click to print the test page, and  you can hear the sweet sound of your printer. If not, try to restart your printer, and make sure the printer's state is Idle, accepting jobs.
 +
 
 +
=== Scanning ===
 +
To scan with the MFC-465CN your must install the brscan2 and brscan-skey packages from the AUR.
 +
 
 +
== Links ===

Revision as of 23:35, 1 October 2013


Introduction

The Brother MFC-465CN is a network capable multi-function printer, first produced in 2007. Brother provides Linux printer and scanner drivers for all its machines, however these are not normally distributed with the usual series of Linux distribution printer driver packages (e.g hplip). Before continuing the user should read the CUPS wiki.

Required packages

Install cups, cups-filters, ghostscript, gsfonts, foomatic-filters and a2ps from Official Repositories.

Install MFC-465CN Cupswrapper and MFC-465CN line printer filters from the AUR

Note: If you use x86_64, you must also install lib32-libcups (from the multilibs repository) for this printer driver to work! When lib32-libcups is not installed, the printer job job queue appears to have been printed successfully, but the printer does nothing and the CUPS logs contain no definitive error messages.
You may need to uncomment the "Multilibs" line in your /etc/pacman.conf file.

Run the "cupswrapper" script

As root run the script:

# /usr/local/brother/Printer/mfc465cn/cupswrapper/cupswrappermfc465cn

This script will stop the cups daemon if it's running, attempt to find and configure your printer, install the drivers and restart CUPS.

Configure the Printer on the CUPS Server

Using your browser navigate to the CUPS server. In the Administration category, choose Manage printers. There you should see a MFC-465CN printer automatically installed and configured. It is usually configured to use the USB port. If the printer is used as a network printer you need to modify the printer configuration. Choose Modify printer, and select Brother MFC-465CN in the device list. Select Apple/ and enter the printer IP as such:

, e.g socket://192.168.0.104:9100 . Your IP address will be different - find in the LAN configuration on the printer itself. The rest of the configuration is preset, so just choose continue. Click to print the test page, and you can hear the sweet sound of your printer. If not, try to restart your printer, and make sure the printer's state is Idle, accepting jobs.

Scanning

To scan with the MFC-465CN your must install the brscan2 and brscan-skey packages from the AUR.

Links =