Difference between revisions of "Bumblebee"

From ArchWiki
Jump to: navigation, search
m (Reworked a sentence, to make it clear.)
m (Start Bumblebee: Fixed a broken anchor)
(14 intermediate revisions by 13 users not shown)
Line 7: Line 7:
 
[[tr:Bumblebee]]
 
[[tr:Bumblebee]]
 
[[zh-CN:Bumblebee]]
 
[[zh-CN:Bumblebee]]
 +
{{Related articles start}}
 +
{{Related|NVIDIA Optimus}}
 +
{{Related|Nouveau}}
 +
{{Related|NVIDIA}}
 +
{{Related|Intel Graphics}}
 +
{{Related articles end}}
 
From Bumblebee's [https://github.com/Bumblebee-Project/Bumblebee/wiki/FAQ FAQ]:
 
From Bumblebee's [https://github.com/Bumblebee-Project/Bumblebee/wiki/FAQ FAQ]:
  
Line 13: Line 19:
 
== Bumblebee: Optimus for Linux ==
 
== Bumblebee: Optimus for Linux ==
  
[http://www.nvidia.com/object/optimus_technology.html Optimus Technology] is an ''[http://hybrid-graphics-linux.tuxfamily.org/index.php?title=Hybrid_graphics hybrid graphics]'' implementation without a hardware multiplexer. The integrated GPU manages the display while the dedicated GPU manages the most demanding rendering and ships the work to the integrated GPU to be displayed. When the laptop is running on battery supply, the dedicated GPU is turned off to save power and prolong the battery life.
+
[http://www.nvidia.com/object/optimus_technology.html Optimus Technology] is an ''[http://hybrid-graphics-linux.tuxfamily.org/index.php?title=Hybrid_graphics hybrid graphics]'' implementation without a hardware multiplexer. The integrated GPU manages the display while the dedicated GPU manages the most demanding rendering and ships the work to the integrated GPU to be displayed. When the laptop is running on battery supply, the dedicated GPU is turned off to save power and prolong the battery life. It has also been tested successfully with desktop machines with Intel integrated graphics and an nVidia dedicated graphics card.  
  
 
Bumblebee is a software implementation comprising of two parts:
 
Bumblebee is a software implementation comprising of two parts:
Line 26: Line 32:
 
== Installation ==
 
== Installation ==
  
Before installing Bumblebee check your BIOS and activate Optimus (older laptops call it "switchable graphics") if possible (BIOS doesn't have to provide this option), and install the [[Intel|Intel driver]] for the secondary on board graphics card.
+
Before installing Bumblebee check your BIOS and activate Optimus (older laptops call it "switchable graphics") if possible (BIOS doesn't have to provide this option), and install the [[Intel Graphics|Intel driver]] for the secondary on board graphics card.
  
 
Several packages are available for a complete setup:
 
Several packages are available for a complete setup:
Line 40: Line 46:
 
=== Installing Bumblebee with Intel/NVIDIA ===
 
=== Installing Bumblebee with Intel/NVIDIA ===
  
Install {{Pkg|intel-dri}}, {{Pkg|xf86-video-intel}}, {{Pkg|bumblebee}} and {{Pkg|nvidia}}.
+
Install {{Pkg|intel-dri}}, {{Pkg|xf86-video-intel}}, {{Pkg|bumblebee}} and {{Pkg|nvidia}}. If you have {{Pkg|intel-dri}} and {{Pkg|xf86-video-intel}} installed, you will have to reinstall them together with the rest to avoid a dependency conflict between {{Pkg|intel-dri}} and {{Pkg|nvidia}}.  
  
 
If you want to run 32-bit applications (like games with wine) on a 64-bit system you need the {{Pkg|lib32-nvidia-utils}} package too.
 
If you want to run 32-bit applications (like games with wine) on a 64-bit system you need the {{Pkg|lib32-nvidia-utils}} package too.
  
{{Note|Do not install lib32-nvidia-libgl! Bumblebee will find the correct lib32 NVIDIA libraries without it.}}
+
{{Warning|Do not install {{pkg|lib32-nvidia-libgl}}. Bumblebee will find the correct lib32 NVIDIA libraries without it.}}
  
 
=== Installing Bumblebee with Intel/Nouveau ===
 
=== Installing Bumblebee with Intel/Nouveau ===
Line 65: Line 71:
 
Finished. Reboot system and use the shell program {{ic|[[#Usage|optirun]]}} for Optimus NVIDIA rendering!
 
Finished. Reboot system and use the shell program {{ic|[[#Usage|optirun]]}} for Optimus NVIDIA rendering!
  
If you simply wish to disable your NVIDIA card, this should be all that is needed, apart from having {{ic|bbswitch}} installed. The bumblebeed daemon will, by default, instruct bbswitch to turn off the card when it starts. See also the [[#Power Management|power management]] section below.
+
If you simply wish to disable your NVIDIA card, this should be all that is needed, apart from having {{ic|bbswitch}} installed. The bumblebeed daemon will, by default, instruct bbswitch to turn off the card when it starts. See also the [[#Power management|power management]] section below.
  
 
== Usage ==
 
== Usage ==
Line 153: Line 159:
  
 
==== Enable NVIDIA card during shutdown ====
 
==== Enable NVIDIA card during shutdown ====
 +
The NVIDIA card may not correctly initialize during boot if the card was powered off when the system was last shutdown.  One option is to set {{ic|TurnCardOffAtExit=false}} in {{ic|/etc/bumblebee/bumblebee.conf}}, however this will enable the card everytime you stop the Bumblebee daemon, even if done manually.  To ensure that the NVIDIA card is always powered on during shutdown, add the following [[systemd]] service (if using {{pkg|bbswitch}}):
  
{{Out of date|rc.d ??}}
+
{{hc|/etc/systemd/system/nvidia-enable.service|2=
The NVIDIA card may not correctly initialize during boot if the card was powered off when the system was last shutdown.  One option is to set {{ic|TurnCardOffAtExit=false}} in {{ic|/etc/bumblebee/bumblebee.conf}}, however this will enable the card everytime you stop the Bumblebee daemon, even if done manually. To ensure that the NVIDIA card is always powered on during shutdown, add the following [[Boot process#Custom_hooks|hook function]] (if using {{pkg|bbswitch}}):
+
[Unit]
 +
Description=Enable NVIDIA card
 +
DefaultDependencies=no
  
{{hc|/etc/rc.d/functions.d/nvidia-card-enable|2=
+
[Service]
nvidia_card_enable() {
+
Type=oneshot
  BBSWITCH=/proc/acpi/bbswitch
+
ExecStart=/bin/sh -c 'echo ON > /proc/acpi/bbswitch'
  
  stat_busy "Enabling NVIDIA GPU"
+
[Install]
 +
WantedBy=shutdown.target
 +
}}
  
  if [ -w ${BBSWITCH} ]; then
+
Then enable the service by running {{ic|systemctl enable nvidia-enable.service}} at the root prompt.
    echo ON > ${BBSWITCH}
+
    stat_done
+
  else
+
    stat_fail
+
  fi
+
}
+
 
+
add_hook shutdown_poweroff nvidia_card_enable
+
}}
+
  
 
=== Multiple monitors ===
 
=== Multiple monitors ===
Line 251: Line 253:
 
==== Output wired to the NVIDIA chip ====
 
==== Output wired to the NVIDIA chip ====
  
On some notebooks, the digital Video Output (HDMI or Displayport) is hardwired to the NVIDIA chip. If you want to use all the displays on such a system simultaniously, you have to run 2 X Servers. The first will be using the Intel driver for the notebooks panel and a display connected on VGA. The second will be started through optirun on the NVIDIA card, and drives the digital display.
+
On some notebooks, the digital Video Output (HDMI or DisplayPort) is hardwired to the NVIDIA chip. If you want to use all the displays on such a system simultaniously, you have to run 2 X Servers. The first will be using the Intel driver for the notebooks panel and a display connected on VGA. The second will be started through optirun on the NVIDIA card, and drives the digital display.
  
 
There are currently several instructions on the web how such a setup can be made to work. One can be found on the bumblebee [https://github.com/Bumblebee-Project/Bumblebee/wiki/Multi-monitor-setup wiki page]. Another approach is described below.
 
There are currently several instructions on the web how such a setup can be made to work. One can be found on the bumblebee [https://github.com/Bumblebee-Project/Bumblebee/wiki/Multi-monitor-setup wiki page]. Another approach is described below.
Line 264: Line 266:
  
 
* Reinstall bumlbebee and bbswitch, reboot and set the system Gfx back to Hybrid in the BIOS.  
 
* Reinstall bumlbebee and bbswitch, reboot and set the system Gfx back to Hybrid in the BIOS.  
* Install {{AUR|xf86-video-intel-virtual-crtc}}, and replace your xf86-video-intel package with it
+
* Install {{AUR|xf86-video-intel-virtual-crtc}}, and replace your xf86-video-intel package with it.
* Download [https://github.com/liskin/hybrid-screenclone hybrid-screenclone] and build it using "make".
+
* Install {{AUR|screenclone-git}}
 
* Change these bumblebee.conf settings:
 
* Change these bumblebee.conf settings:
 
{{hc|/etc/bumblebee/bumblebee.conf|2=
 
{{hc|/etc/bumblebee/bumblebee.conf|2=
Line 353: Line 355:
 
* Check the log of the second X server in {{ic|/var/log/Xorg.8.log}}
 
* Check the log of the second X server in {{ic|/var/log/Xorg.8.log}}
 
* Run xrandr to set up the VIRTUAL display to be the right size and placement, eg.: {{ic|xrandr --output VGA1 --auto --rotate normal --pos 0x0 --output VIRTUAL1 --mode 1920x1080 --right-of VGA1 --output LVDS1 --auto --rotate normal --right-of VIRTUAL1}}
 
* Run xrandr to set up the VIRTUAL display to be the right size and placement, eg.: {{ic|xrandr --output VGA1 --auto --rotate normal --pos 0x0 --output VIRTUAL1 --mode 1920x1080 --right-of VGA1 --output LVDS1 --auto --rotate normal --right-of VIRTUAL1}}
* Take note of the position of the VIRTUAL display in the list of Outputs as shown by xrandr. The counting starts from zero, i.e. if it is the third display shown, you would specify {{ic|-x 2}} as parameter to {{ic|screenclone}}
+
* Take note of the position of the VIRTUAL display in the list of Outputs as shown by xrandr. The counting starts from zero, i.e. if it is the third display shown, you would specify {{ic|-x 2}} as parameter to {{ic|screenclone}} (Note: This might not always be correct. If you see your internal laptop display cloned on the monitor, try {{ic|-x 2}} anyway.)
 
* Clone the contents of the VIRTUAL display onto the X server created by bumblebee, which is connected to the DisplayPort monitor via the NVIDIA chip:
 
* Clone the contents of the VIRTUAL display onto the X server created by bumblebee, which is connected to the DisplayPort monitor via the NVIDIA chip:
 
: {{ic|screenclone -d :8 -x 2}}
 
: {{ic|screenclone -d :8 -x 2}}
Line 378: Line 380:
 
== CUDA without Bumblebee==
 
== CUDA without Bumblebee==
  
This is not well documented, but you do not need Bumblebee to use CUDA and it may work even on machines where optirun fails. For a guide on how to get it working with the Lenovo IdeaPad Y580 (which uses the GeForce 660M), see: https://wiki.archlinux.org/index.php/Lenovo_IdeaPad_Y580#NVIDIA_Card. Those instructions are very likely to work with other machines (except for the acpi-handle-hack part, which may not be necessary).
+
This is not well documented, but you do not need Bumblebee to use CUDA and it may work even on machines where optirun fails. For a guide on how to get it working with the Lenovo IdeaPad Y580 (which uses the GeForce 660M), see: https://wiki.archlinux.org/index.php/Lenovo_IdeaPad_Y580#NVIDIA_Card. Those instructions are very likely to work with other machines.
  
 
== Troubleshooting ==
 
== Troubleshooting ==
Line 440: Line 442:
 
  Option "ConnectedMonitor" "CRT"
 
  Option "ConnectedMonitor" "CRT"
  
 +
==== Could not load GPU driver ====
 +
 +
If the console output is:
 +
 +
[ERROR]Cannot access secondary GPU - error: Could not load GPU driver
 +
 +
and if you try to load the nvidia module you get:
 +
 +
modprobe nvidia
 +
modprobe: ERROR: could not insert 'nvidia': Exec format error
 +
 +
You should try manually compiling the nvidia packages against your current kernel.
 +
 +
yaourt -Sb nvidia
 +
 +
Should do the trick
  
 
=== ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded: ignored ===
 
=== ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded: ignored ===

Revision as of 06:21, 19 December 2013

From Bumblebee's FAQ:

"Bumblebee is an effort to make NVIDIA Optimus enabled laptops work in GNU/Linux systems. Such feature involves two graphics cards with two different power consumption profiles plugged in a layered way sharing a single framebuffer."

Bumblebee: Optimus for Linux

Optimus Technology is an hybrid graphics implementation without a hardware multiplexer. The integrated GPU manages the display while the dedicated GPU manages the most demanding rendering and ships the work to the integrated GPU to be displayed. When the laptop is running on battery supply, the dedicated GPU is turned off to save power and prolong the battery life. It has also been tested successfully with desktop machines with Intel integrated graphics and an nVidia dedicated graphics card.

Bumblebee is a software implementation comprising of two parts:

  • Render programs off-screen on the dedicated video card and display it on the screen using the integrated video card. This bridge is provided by VirtualGL or primus (read further) and connects to a X server started for the discrete video card.
  • Disable the dedicated video card when it is not in use (see the Power management section)

It tries to mimic the Optimus technology behavior; using the dedicated GPU for rendering when needed and power it down when not in use. The present releases only support rendering on-demand, automatically starting a program with the discrete video card based on workload is not implemented.

Warning: Bumblebee is still under heavy development! But your help is very welcome.

Installation

Before installing Bumblebee check your BIOS and activate Optimus (older laptops call it "switchable graphics") if possible (BIOS doesn't have to provide this option), and install the Intel driver for the secondary on board graphics card.

Several packages are available for a complete setup:

  • bumblebee - The main package providing the daemon and client programs.
  • (optional) bbswitch (or bbswitch-dkmsAUR) - Recommended for saving power by disable the NVIDIA card.
  • (optional) If you want more than just saving power, that is rendering programs on the discrete NVDIA card you also need:
    • a driver for the NVIDIA card. The open-source nouveau driver or the more closed-source NVIDIA driver. See the subsection.
    • a render/display bridge. Two packages are currently available for that, primus (or primus-gitAUR) and virtualgl. Only one of them is necessary, but installing them side-by-side does not hurt.
Note: If you want to run a 32-bit application on a 64-bit system you must install the proper lib32-* libraries for the program. In addition to this, you also need to install lib32-virtualgl or lib32-primus, depending on your choice for the render bridge. Just make sure you run primusrun instead of optirun if you decide to use Primus render bridge.

Installing Bumblebee with Intel/NVIDIA

Install intel-dri, xf86-video-intel, bumblebee and nvidia. If you have intel-dri and xf86-video-intel installed, you will have to reinstall them together with the rest to avoid a dependency conflict between intel-dri and nvidia.

If you want to run 32-bit applications (like games with wine) on a 64-bit system you need the lib32-nvidia-utils package too.

Warning: Do not install lib32-nvidia-libgl. Bumblebee will find the correct lib32 NVIDIA libraries without it.

Installing Bumblebee with Intel/Nouveau

Install:

Start Bumblebee

In order to use Bumblebee it is necessary add yourself (and other users) to the bumblebee group:

# gpasswd -a $USER bumblebee

where $USER is the login name of the user to be added. Then log off and on again to apply the group changes.

Tip: If you wish bumblebee to start at boot, you have to enable systemd service bumblebeed.

Finished. Reboot system and use the shell program optirun for Optimus NVIDIA rendering!

If you simply wish to disable your NVIDIA card, this should be all that is needed, apart from having bbswitch installed. The bumblebeed daemon will, by default, instruct bbswitch to turn off the card when it starts. See also the power management section below.

Usage

The command line programm optirun shipped with Bumblebee is your best friend for running applications on your Optimus NVIDIA card.

Test Bumblebee if it works with your Optimus system:

$ optirun glxgears -info

If it succeeds and the terminal you are running from mentions something about your NVIDIA - Optimus with Bumblebee is working!

General usage:

$ optirun [options] application [application-parameters]

Some Examples:

Start Windows applications with Optimus:

$ optirun wine windows application.exe

Use NVIDIA Settings with Optimus:

$ optirun -b none nvidia-settings -c :8

For a list of options for optirun view its manual page.

A new program is soon becoming the default choice because of better performance, namely primus. Currently you need to run this program separately (it does not accept options unlike optirun), but in the future it will be started by optirun. Usage:

$ primusrun glxgears

Configuration

You can configure the behaviour of Bumblebee to fit your needs. Fine tuning like speed optimization, power management and other stuff can be configured in /etc/bumblebee/bumblebee.conf

Optimizing speed when using VirtualGL as bridge

Bumblebee renders frames for your Optimus NVIDIA card in an invisible X Server with VirtualGL and transports them back to your visible X Server.

Frames will be compressed before they are transported - this saves bandwidth and can be used for speed-up optimization of bumblebee:

To use an other compression method for a single application:

$ optirun -c compress-method application

The method of compres will affect performance in the GPU/GPU usage. Compressed methods (such as jpeg) will load the CPU the most but will load GPU the minimum necessary; uncompressed methods loads the most on GPU and the CPU will have the minimum load possible.

Compressed methods are: jpeg, rgb, yuv.

Uncompressed methods are: proxy, xv.

To use a standard compression for all applications set the VGLTransport to compress-method in /etc/bumblebee/bumblebee.conf:

/etc/bumblebee/bumblebee.conf
[...]
[optirun]
VGLTransport=proxy
[...]

You can also play with the way VirtualGL reads back the pixels from your graphic card. Setting VGL_READBACK environment variable to pbo should increase the performance. Compare these two:

# PBO should be faster.
VGL_READBACK=pbo optirun glxspheres
# The default value is sync.
VGL_READBACK=sync optirun glxspheres
Note: CPU frequency scaling will affect directly on render performance

Power management

The goal of power management feature is to turn off the NVIDIA card when it is not used by bumblebee any more. If bbswitch is installed, it will be detected automatically when the Bumblebee daemon starts. No additional configuration is necessary.

Default power state of NVIDIA card using bbswitch

The default behavior of bbswitch is to leave the card power state unchanged. bumblebeed does disable the card when started, so the following is only necessary if you use bbswitch without bumblebeed.

Set load_state and unload_state module options according to your needs (see bbswitch documentation).

/etc/modprobe.d/bbswitch.conf
options bbswitch load_state=0 unload_state=1

Enable NVIDIA card during shutdown

The NVIDIA card may not correctly initialize during boot if the card was powered off when the system was last shutdown. One option is to set TurnCardOffAtExit=false in /etc/bumblebee/bumblebee.conf, however this will enable the card everytime you stop the Bumblebee daemon, even if done manually. To ensure that the NVIDIA card is always powered on during shutdown, add the following systemd service (if using bbswitch):

/etc/systemd/system/nvidia-enable.service
[Unit]
Description=Enable NVIDIA card
DefaultDependencies=no

[Service]
Type=oneshot
ExecStart=/bin/sh -c 'echo ON > /proc/acpi/bbswitch'

[Install]
WantedBy=shutdown.target

Then enable the service by running systemctl enable nvidia-enable.service at the root prompt.

Multiple monitors

Outputs wired to the Intel chip

If the port (DisplayPort/HDMI/VGA) is wired to the Intel chip, you can set up multiple monitors with xorg.conf. Set them to use the Intel card, but Bumblebee can still use the NVIDIA card. One example configuration is below for two identical screens with 1080p resolution and using the HDMI out.

/etc/X11/xorg.conf
Section "Screen"
    Identifier     "Screen0"
    Device         "intelgpu0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    SubSection "Display"
        Depth          24
        Modes          "1980x1080_60.00"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "intelgpu1"
    Monitor        "Monitor1"
    DefaultDepth   24
    Option         "TwinView" "0"
    SubSection "Display"
        Depth          24
        Modes          "1980x1080_60.00"
    EndSubSection
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    Option         "Enable" "true"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    Option         "Enable" "true"
EndSection

Section "Device"
    Identifier     "intelgpu0"
    Driver         "intel"
    Option         "XvMC" "true"
    Option         "UseEvents" "true"
    Option         "AccelMethod" "UXA"
    BusID          "PCI:0:2:0"
EndSection

Section "Device"
    Identifier     "intelgpu1"
    Driver         "intel"
    Option         "XvMC" "true"
    Option         "UseEvents" "true"
    Option         "AccelMethod" "UXA"
    BusID          "PCI:0:2:0"
EndSection

Section "Device"
    Identifier "nvidiagpu1"
    Driver "nvidia"
    BusID "PCI:0:1:0"
EndSection

You need to probably change the BusID for both the Intel and the NVIDIA card.

$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)

The BusID is 0:2:0

Output wired to the NVIDIA chip

On some notebooks, the digital Video Output (HDMI or DisplayPort) is hardwired to the NVIDIA chip. If you want to use all the displays on such a system simultaniously, you have to run 2 X Servers. The first will be using the Intel driver for the notebooks panel and a display connected on VGA. The second will be started through optirun on the NVIDIA card, and drives the digital display.

There are currently several instructions on the web how such a setup can be made to work. One can be found on the bumblebee wiki page. Another approach is described below.

xf86-video-intel-virtual-crtc and hybrid-screenclone

This method uses a patched Intel driver, which is extended to have a VIRTUAL Display, and the program hybrid-screenclone which is used to copy the display over from the virtual display to a second X Server which is running on the NVIDIA card using Optirun. Credit goes to Triple-head monitors on a Thinkpad T520 which has a detailed explanation on how this is done on a Ubuntu system.

For simplicity, DP is used below to refer to the Digital Output (DisplayPort). The instructions should be the same if the notebook has a HDMI port instead.

  • Set system to use NVIDIA card exclusively, test DP/Monitor combination and generate xorg.nvidia.conf. This step is not required, but recommended if your system Bios has an option to switch the graphics into NVIDIA-only mode. To do this, first uninstall the bumblebee package and install just the NVIDIA driver. Then reboot, enter the Bios and switch the Graphics to NVIDIA-only. When back in Arch, connect you Monitor on DP and use startx to test if it is working in principle. Use Xorg -configure to generate an xorg.conf file for your NVIDIA card. This will come in handy further down below.
  • Reinstall bumlbebee and bbswitch, reboot and set the system Gfx back to Hybrid in the BIOS.
  • Install xf86-video-intel-virtual-crtcAUR, and replace your xf86-video-intel package with it.
  • Install screenclone-gitAUR
  • Change these bumblebee.conf settings:
/etc/bumblebee/bumblebee.conf
KeepUnusedXServer=true
Driver=nvidia
Note: Leave the PMMethod set to "bumblebee". This is contrary to the instructions linked in the article above, but on arch this options needs to be left alone so that bbswitch module is automatically loaded
  • Copy the xorg.conf generated in Step 1 to /etc/X11 (e.g. /etc/X11/xorg.nvidia.conf). In the [driver-nvidia] section of bumblebee.conf, change XorgConfFile to point to it.
  • Test if your /etc/X11/xorg.nvidia.conf is working with startx -- -config /etc/X11/xorg.nvidia.conf
  • In order for your DP Monitor to show up with the correct resolution in your VIRTUAL Display you might have to edit the Monitor section in your /etc/xorg.nvidia.conf. Since this is extra work, you could try to continue with your auto-generated file. Come back to this step in the instructions if you find that the resolution of the VIRTUAL Display as shown by xrandr is not correct.
    • First you have to generate a Modeline. You can use the tool amlc, which will genearte a Modeline if you input a few basic parameters.
Example: 24" 1920x1080 Monitor
start the tool with amlc -c
Monitor Identifier: Samsung 2494
Aspect Ratio: 2
physical size[cm]: 60
Ideal refresh rate, in Hz: 60
min HSync, kHz: 40
max HSync, kHz: 90
min VSync, Hz: 50
max VSync, Hz: 70
max pixel Clock, MHz: 400

This is the Monitor section which amlc generated for this input:

Section "Monitor"
    Identifier     "Samsung 2494"
    ModelName      "Generated by Another Modeline Calculator"
    HorizSync      40-90
    VertRefresh    50-70
    DisplaySize    532 299  # Aspect ratio 1.778:1
    # Custom modes
    Modeline "1920x1080" 174.83 1920 2056 2248 2536 1080 1081 1084 1149             # 174.83 MHz,  68.94 kHz,  60.00 Hz
EndSection  # Samsung 2494

Change your xorg.nvidia.conf to include this Monitor section. You can also trim down your file so that it only contains ServerLayout, Monitor, Device and Screen sections. For reference, here is mine:

/etc/X11/xorg.nvidia.conf
Section "ServerLayout"
        Identifier     "X.org Nvidia DP"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Monitor"
    Identifier     "Samsung 2494"
    ModelName      "Generated by Another Modeline Calculator"
    HorizSync      40-90
    VertRefresh    50-70
    DisplaySize    532 299  # Aspect ratio 1.778:1
    # Custom modes
    Modeline "1920x1080" 174.83 1920 2056 2248 2536 1080 1081 1084 1149             # 174.83 MHz,  68.94 kHz,  60.00 Hz
EndSection  # Samsung 2494

Section "Device"
        Identifier  "DiscreteNvidia"
        Driver      "nvidia"
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "DiscreteNvidia"
        Monitor    "Samsung 2494"
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection
  • Plug in both external monitors and startx. Look at your /var/log/Xorg.0.log. Check that your VGA Monitor is detected with the correct Modes there. You should also see a VIRTUAL output with modes show up.
  • Run xrandr and three displays should be listed there, along with the supported modes.
  • If the listed Modelines for your VIRTUAL display doesn't have your Monitors native resolution, make note of the exact output name. For me that is VIRTUAL1. Then have a look again in the Xorg.0.log file. You should see a message: "Output VIRTUAL1 has no monitor section" there. We will change this by putting a file with the needed Monitor section into /etc/X11/xorg.conf.d. Exit and Restart X afterward.
/etc/X11/xorg.conf.d/20-monitor_samsung.conf
Section "Monitor"
    Identifier     "VIRTUAL1"
    ModelName      "Generated by Another Modeline Calculator"
    HorizSync      40-90
    VertRefresh    50-70
    DisplaySize    532 299  # Aspect ratio 1.778:1
    # Custom modes
    Modeline "1920x1080" 174.83 1920 2056 2248 2536 1080 1081 1084 1149             # 174.83 MHz,  68.94 kHz,  60.00 Hz
EndSection  # Samsung 2494
  • Turn the NVIDIA card on by running: sudo tee /proc/acpi/bbswitch <<< ON
  • Start another X server for the DisplayPort monitor: sudo optirun true
  • Check the log of the second X server in /var/log/Xorg.8.log
  • Run xrandr to set up the VIRTUAL display to be the right size and placement, eg.: xrandr --output VGA1 --auto --rotate normal --pos 0x0 --output VIRTUAL1 --mode 1920x1080 --right-of VGA1 --output LVDS1 --auto --rotate normal --right-of VIRTUAL1
  • Take note of the position of the VIRTUAL display in the list of Outputs as shown by xrandr. The counting starts from zero, i.e. if it is the third display shown, you would specify -x 2 as parameter to screenclone (Note: This might not always be correct. If you see your internal laptop display cloned on the monitor, try -x 2 anyway.)
  • Clone the contents of the VIRTUAL display onto the X server created by bumblebee, which is connected to the DisplayPort monitor via the NVIDIA chip:
screenclone -d :8 -x 2

Thats it, all three displays should be up and running now.

Switch between discrete and integrated like Windows

In Windows, the way that Optimus works is NVIDIA has a whitelist of applications that require Optimus for, and you can add applications to this whitelist as needed. When you launch the application, it automatically decides which card to use.

To mimic this behavior in Linux, you can use libgl-switcheroo-gitAUR. After installing, you can add the below in your .xprofile.

~/.xprofile
mkdir -p /tmp/libgl-switcheroo-$USER/fs
gtkglswitch &
libgl-switcheroo /tmp/libgl-switcheroo-$USER/fs &

To enable this, you must add the below to the shell that you intend to launch applications from (I simply added it to the .xprofile file)

export LD_LIBRARY_PATH=/tmp/libgl-switcheroo-$USER/fs/\$LIB${LD_LIBRARY_PATH+:}$LD_LIBRARY_PATH

Once this has all been done, every application you launch from this shell will pop up a GTK+ window asking which card you want to run it with (you can also add an application to the whitelist in the configuration). The configuration is located in $XDG_CONFIG_HOME/libgl-switcheroo.conf, usually ~/.config/libgl-switcheroo.conf

CUDA without Bumblebee

This is not well documented, but you do not need Bumblebee to use CUDA and it may work even on machines where optirun fails. For a guide on how to get it working with the Lenovo IdeaPad Y580 (which uses the GeForce 660M), see: https://wiki.archlinux.org/index.php/Lenovo_IdeaPad_Y580#NVIDIA_Card. Those instructions are very likely to work with other machines.

Troubleshooting

Note: Please report bugs at Bumblebee-Project's GitHub tracker as described in its wiki.

[VGL] ERROR: Could not open display :8

There is a known problem with some wine applications that fork and kill the parent process without keeping track of it (for example the free to play online game "Runes of Magic")

This is a known problem with VirtualGL. As of bumblebee 3.1, so long as you have it installed, you can use Primus as your render bridge:

$ optirun -b primus wine windows program.exe

If this does not work, an alternative walkaround for this problem is:

$ optirun bash
$ optirun wine windows program.exe

If using NVIDIA drivers a fix for this problem is to edit /etc/bumblebee/xorg.conf.nvidia and change Option ConnectedMonitor to CRT-0.

[ERROR]Cannot access secondary GPU

No devices detected

In some instances, running optirun will return:

[ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
[ERROR]Aborting because fallback start is disabled.

In this case, you will need to move the file /etc/X11/xorg.conf.d/20-intel.conf to somewhere else. Restart the bumblebeed daemon, and it should work. If you do need to change some features on Intel module, a workaround is to move your /etc/X11/xorg.conf.d/20-intel.conf to /etc/X11/xorg.conf.

It could be also necessary to comment the driver line in /etc/X11/xorg.conf.d/10-monitor.conf.

If you're using the nouveau driver you could try switching to the nVidia driver.

You might need to define the NVIDIA card somewhere (e.g. file /etc/X11/xorg.conf.d), and remember to change the BusID using lspci.

Section "Device"
    Identifier "nvidiagpu1"
    Driver "nvidia"
    BusID "PCI:0:1:0"
EndSection

NVIDIA(0): Failed to assign any connected display devices to X screen 0

If the console output is:

[ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0
[ERROR]Aborting because fallback start is disabled.


You can change this line in /etc/bumblebee/xorg.conf.nvidia:

Option "ConnectedMonitor" "DFP"

to:

Option "ConnectedMonitor" "CRT"

Could not load GPU driver

If the console output is:

[ERROR]Cannot access secondary GPU - error: Could not load GPU driver

and if you try to load the nvidia module you get:

modprobe nvidia
modprobe: ERROR: could not insert 'nvidia': Exec format error

You should try manually compiling the nvidia packages against your current kernel.

yaourt -Sb nvidia

Should do the trick

ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded: ignored

You probably want to start a 32-bit application with bumblebee on a 64-bit system. See the "Note" box in Installation.

Fatal IO error 11 (Resource temporarily unavailable) on X server

Change KeepUnusedXServer in /etc/bumblebee/bumblebee.conf from false to true. Your program forks into background and bumblebee don't know anything about it.

Video tearing

Video tearing is a somewhat common problem on Bumblebee. To fix it, you need to enable vsync. It should be enabled by default on the Intel card, but verify that from Xorg logs. To check whether or not it is enabled for NVIDIA, run:

$ optirun nvidia-settings -c :8

X Server XVideo Settings -> Sync to VBlank and OpenGL Settings -> Sync to VBlank should both be enabled. The Intel card has in general less tearing, so use it for video playback. Especially use VA-API for video decoding (e.g. mplayer-vaapi and with -vsync parameter).

Refer to the Intel article on how to fix tearing on the Intel card.

If it is still not fixed, try to disable compositing from your desktop environment. Try also disabling triple buffering.

Bumblebee cannot connect to socket

You might get something like:

$ optirun glxspheres
[ 1648.179533] [ERROR]You've no permission to communicate with the Bumblebee daemon. Try adding yourself to the 'bumblebee' group
[ 1648.179628] [ERROR]Could not connect to bumblebee daemon - is it running?

If you are already in the bumblebee group ($ groups | grep bumblebee), you may try removing the socket /var/run/bumblebeed.socket.

See also

Join us at #bumblebee at freenode.net.